MAINT AND REPALCEMENT CGI SHEET WALL PANELLING CEILING OF VARIOUS BLDG AT KHALSAR UNDER AOR OF AGE BR II UNDER GE PARTAPUR

Amount

M & L for dismantling wall and ceilling board (fibre, pulp, insulation etc) or insulation board/slabs/blanket any thickness including cover fillets, complete all as specified and directed br Engr-in-charge.

M & L for dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed br Engr-in-charge.

S & F of 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed br Engr-in-charge.

S & F of 0.63mm thick, plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed br Engr-in-charge.

M & L for preparation of new steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying two coat of synthetic enamel paint over one priming coat of red oxide, complete all as specified and directed by the Engineer-in-Charge.

M & L for preparation of old steel surfaces of any description over 10cm in width or girth, not otherwise described, and applying two coat of synthetic enamel paint over one priming coat of red oxide, complete all as specified and directed by the Engineer-in-Charge.

M & L for taking down chowkats or frames with shutters (with out taking off shutters from the frames) n. exc 1.50 Sqm each (Steel/Wooden), complete all as specified and directed by the Engineer-in-Charge.

M & L for taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5sqm but n. exc 4 Sqm each (Steel/Wooden), complete all as specified and directed by the Engineer-in-Charge.

S & F plain, solid, straight 2nd class hard wood frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete all as specified and directed by the Engineer-in-Charge.

S & F 2nd class hard wood 30 mm thick glazed and skelton shutters, open rebated & prepared to receive wire gauge (with sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitread beads for securing gauge etc, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24 (a), complete all as specified and directed by the Engineer-in-Charge.

S & F 40 mm thick 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particles board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats, complete all as specified and directed by the Engineer-in-Charge.

M & L for painting to wooden new surface of any description not other wise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on ply wood including preparation of surfaces etc , complete all as specified and directed by the Engineer-in-Charge.

M & L for painting to wooden old surface of any description not other wise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on ply wood including preparation of surfaces etc , complete all as specified and directed by the Engineer-in-Charge.

S & F butt hinges 100mm mild steel cold rolled, medium weight, complete all as specified and directed by the Engineer-in-Charge.

S & F butt hinges 75mm mild steel cold rolled, medium weight, complete all as specified and directed by the Engineer-in-Charge.

M & L for 9 mm thick veneered decorative plywood, grade 1 ( with BWR resin) with only one side decorative face veneers fixed with nails as in wall panelling, complete all as specified and directed by Engr-in-charge..

M & L for 9 mm thick veneered decorative plywood, grade 1 ( with BWR resin) with only one side decorative face veneers fixed with nails as in ceiling works, complete all as specified and directed by Engr-in-charge..

M & L for dismantling timber framed in fillets, rails, posts rafters, purlines, etc under 40 Sq cm in section, complete all as specified and directed by the Engineer-in-Charge.

S & F in repair second class softwood plain fillets, rectangular in section, clean sawn, secured with nails exc 13 and n.exc 25, complete all as specified and directed by Engr-in-charge.

Supply & fix, 30 mm thick flush shutter of size (2.10 x 1.0 ) m, solid core construction, with particle board core with both faces covered with decorative face veener with lipping/ frame to match, complete all as specified and directed by the Engineer-in-Charge.

Supply & fix in repairs, MS sliding door bolts 250 mm long clip type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate and fixed, complete all as specified and directed.

Supply & fix in repair, MS pressed handles, stove enamelled black 125 mm long all as specified, complete all as specified and directed by the Engineer-in-Charge.

Supply & fix Vitreous China Urinal, Full stall type, white (Excluding flusing cistern, flush pipe and waste pipe, complete all as specified and directed by the Engineer-in-Charge.

Supply & fix in repairs, MS barrel tower bolt 150mm long stove enamelled black, complete all as specified and directed by the Engineer-in-Charge.

Supply & fix in repairs extruded aluminium alloy handles, fabricated type, anodised 125 mm size, complete all as specified and directed by the Engineer-in-Charge.

Supply & fix in repairs, 150 mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed by the Engineer-in-Charge.

Supply & fix in repairs, steel window handles, peg stays & Hinges etc (Including welding if required), complete all as specified and directed by the Engineer-in-Charge.

M & L in repairs of wooden beads 2nd class soft wood exc 3 sqcm n.exc 6 sqcm of any size for cup board & glazed or gauged joinery mitres etc, complete all as specified and directed by the Engineer-in-Charge.

S & F in repair, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire stapple with screws to steel windows by drilling holes if not existing and wooden beads to wooden joinery, Cost of beads of flat iron and wooden beads included in the rate, complete all as specified and directed by the Engineer-in-Charge.

M & L for hacking out old broken glass any thickness size, quality or description from wooden/steel frames fixed with wooden beads/metal pinning and S&F 3 mm thick sheet glass in squares not exc 1.20 sqm in each pane fixed with wooden beads or putty (in metal frames etc), complete all as specified and directed. (Up to four Storey), complete all as specified and directed by the Engineer-in-Charge.

M & L for glass pane 4mm thick glass of any description in existing steel frame with putty including removing of old putty, complete all as specified and directed by the Engineer-in-Charge.

S & F Curtain rail Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc and fixed, complete all as specified and directed by the Engineer-in-Charge.

Deduct Schedule of Credit of Rs (-) 37000.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

M/S BHAT ENGINEERS

M/S Behl Sons

M/S LIBE & CO