Fabrication and installation of new Gates along with allied works at various distributaries of main Kathua Canal.

Gate D3 (6' X 3.5') at Kathua Canal

Fabrication and installation of D3 distributary gate on main Kathua canal to regulate irrigation water in D3 canal by way of cutting the concrete structure over the groves of gate with the help of hammer and chisel for smooth extraction and lowering of gate. Dismantling of damaged old gate lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure. Extracting out the damaged/ worn out gate leaf structure with the help of manual labour using tools, tackles and crane after removing accumulated mud/silt around the gate leaf. Carriage of gate structure along with winch machine and stem rod with the help of manual labour using tools and tackles. Loading in mechanical transport and then carriage to workshop. Fabrication of vertical leaf structure of size 6 ft x 3.5 ft (approx.) using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 4 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 6 mm thickness on the frame of fabricated from MS channel. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with stem rod and rain pipe. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour using crane. Drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and two coats of superior quality enamel paint. Complete job includes cost of material, rebate on old parts/scrap, transportation charge, labour charges, crane charges and testing for its smooth operation at site. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions.

Gate D7 (5' X 3.5') at Kathua Canal

Fabrication and installation of D7 distributary gate on main Kathua canal to regulate irrigation water in D7 canal by way of cutting the concrete structure over the groves of gate with the help of hammer and chisel for smooth extraction and lowering of gate. Dismantling of damaged old gate lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure. Extracting out the damaged/ worn out gate leaf structure with the help of manual labour using tools, tackles and crane after removing accumulated mud/silt around the gate leaf. Carriage of gate structure along with winch machine and stem rod with the help of manual labour using tools and tackles. Loading in mechanical transport and then carriage to workshop. Fabrication of leaf structure of size 5 ft x 3.5 ft (approx.) using the ISMC 75 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 4 number horizontal supports and 3 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 75 channel. Providing and welding the MS sheet of 6 mm thickness on the frame of fabricated from MS channel. The Job also includes complete fabrication of outer frame MS structure of size (8' X 3.5') by MS channel of ISMC 100 consisting of groove channels, base channels and checking it for trouble free operation. Top hoisting channel consisting of 2 number of ISMC 100 of length 4.5 ft length each. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with stem rod and rain pipe. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Loading the gate structure along with winch machine on the mechanical transport for carrying to site of installation. Unloading the gate structure at road side then shifting to the site of installation. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour using crane. Drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and two coats of superior quality enamel paint. Complete job includes cost of material, rebate on old parts/scrap, transportation charge, labour charges, crane charges and testing for its smooth operation at site. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions.

Gate D8 (5' X 4') at Kathua Canal

Fabrication and installation of D8 distributary gate on Kathua canal to regulate irrigation water in D8 canal by way of cutting the concrete structure over the grooves of gate with the help of hammer and chisel for smooth extraction and lowering of gate. Extracting out the gate leaf structure with the help of manual labour using tools, tackles and crane after removing accumulated mud/silt around the gate leaf. Loading winch machine, MS channels and other required material on the mechanical transport for carrying to site of installation. Fabrication of outer frame MS structure of size (8' X 4') by MS channel of ISMC 100 consisting of groove channels and base channels. Top hoisting channel consisting of 2 number of ISMC 100 of length 6 ft each. Hoisting channels should be welded with groove channels. Fabrication, providing & fitting of 03 Ton capacity manually operated, worm gear type winch machine along with stem rod and rain pipe. Oiling and greasing the gear and bearings mechanism before fitting. Providing and fitting of rain pipe over the winch machine to secure the stem rod and machinery. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour using crane. Drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and two coats of superior quality enamel paint. Complete job includes cost of material, rebate on old parts/scrap, transportation charge, labour charges, crane charges and testing for its smooth operation at site. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions.

Gate D9 (9' X 5') at Kathua Canal

Fabrication and installation of D9 gate on main Kathua canal to regulate irrigation water in D9 canal by way of dismantling of damaged old gate lifting mechanism from the supporting channel and disconnecting the stem rod from the leaf structure. Extracting out the damaged/worn out gate leaf structure with the help of manual labour using tools, tackles and crane after removing accumulated mud/silt around the gate leaf. Carriage of gate structure along with winch machine and stem rod with the help of manual labour using tools and tackles. Loading in mechanical transport and then carriage to workshop. Fabrication of leaf structure of size 9 ft x 5 ft (approx.) using the ISMC 100 channel size with vertical & horizontal cross members for support by way of cutting as per required size and then welding using superior quality electrodes. The leaf is to be fabricated with 4 number horizontal supports and 5 number vertical supports at equidistance from each other. The supports should be fabricated out of ISMC 100 channel. Providing and welding the MS sheet of 8 mm thickness on the frame of fabricated from MS channel. Fabrication of L shaped clamps attaching stem rod attachment during up and downward moment of gate. The job also includes servicing of winch machine by way of greasing & oiling using standard quality grease after removing the old grease and washing / cleaning with kerosene oil or any other solvent to make it dust free. Providing and fitting of 2 no. bearings and new nuts and bolts after cutting rusted one by welding Providing/fitting of rubber seal and seal cover plate out of MS flat 50x6 mm with nuts ,bolts & washers after drilling holes. The Job also includes Complete fabrication of outer MS structure of size (9'X9') by MS channel of ISMC 175 consisting of groove channels, base channels and checking it for trouble free operation. Top hoisting channel consisting of 2 number of ISMC 250 of length 11 ft length each. Installation of gate structure by way of lowering the leaf structure into the sliding grooves using skilled manual labour using crane. Drilling requisite no. of holes in hoisting channels at site. Fitting of winch machine on the supporting channel and connecting the stem rod to the leaf structure after ensuring the proper alignment/gravity of the gate structure. Complete painting of gate structure with one coat of red oxide primer and two coats of superior quality enamel paint. Complete job includes cost of material, rebate on old parts/scrap, transportation charge, labour charges, crane charges and testing for its smooth operation at site. Note:- The tenderers are requested to visit the site and quote the rate as per site conditions. Any modifications/ alterations of the job, absolutely necessary if required at the time of execution may be done as per actual site conditions.

M/S HITAISHI ELECTRICALS AND MECHANICAL WORKS

SMART TECH AND CO

M/S HITAISHI ELECTRICALS AND MECHANICAL WORKS