Creation of record room in CRC building terrace at ACTREC

Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove edges and jointed with bonding plaster as per manufacturer’s specifications in super structure above plinth level up to floor V level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm

Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge.

Supplying & installing of ABC Type Fire Extinguisher Cap. 6 kg Filled with Mono Ammonium Phosphate Powder 50% confirms to IS 4308, Stored Pressure Type, UGTS Pressure Gauge, Discharge Time 24 Sec, Controllable discharge mechanism, Jet Range 5 Meters, Average Discharge is 92%, applicable on Class A,B & C and electrically started Fire, Fire Rating 4A:144B, Can Construction : Deep drawn & CO2 Mig welded, EPDM Rubber Hose with both end Aluminum clamped, Internal Coating - Epoxy Powder coating, External Coating - Pure Polyester Powder coating (UV Resistant), Brass forged valves with safety Pin is of SS material, Made up from 2mm thick sheet, ISI Approved IS 15683:2018

Wiring for circuit/sub main wiring along with earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduit/ casing capping, bends and all fixing accessories as required.

SITC of AC point with 20 Amps 2 Pin + Earth (AS 20) reroll type metalic sockets- 1 NO / 20 Amps DP MCB with separate Neutral link as controlling S/W - 1No./20 Amps metalic top- 1 No. for the above socket.

Supply and Fixing of 100W, LED Flood light fitting, IP-65/67 outdoor type

Supply % fixing of 22W,4' long surface type LED tube lighting fixture

Supply & laying of 2.5 sqmm Cu wire

Supply & laying of 1.5 sqmm Cu wire

Providing & erecting distribution made out of 2 mm thick (in case of fabrication) MS CRCA sheet with concealed hinges, mounted on MS angle frame & grouted on the wall/fixed on the coloum with anchor fastener with earthing terminal, neutral link, interconnection with adequate size of Bus-bar/wires, interior of the DB shall be covered with 3 mm thick FRP sheet with necessary cut out, neoprene gasket, painting with seven tank metal treatment process. All as above for 63 amps TPN MCB--1 No. /// 40 amps DP ELCB(30 mA)--3 Nos /// 16 amps SP MCB (8 ways)--24 Nos.

Supply, installation, testing & commissioning of 1.1 KV grade PVC insulated stranded/ round wire armoured Copper/Aluminium conductor power cables ISI mark fixed on wall/ coloum/ ceiling or in shaft/existing trench on 5 mm thick spacers/ angle support fixed with screws/ coach screws/ anchor fasteners, all other fixing accessories etc. as per instruction of Engg.-in-charge. Cable will be 4 x 10 sq. mm copper conductor. Including lug, gland and all accessories.

16 Amp,5 pin, switch socket combination board(Composite)

Supply & fixing of Cable Gland for 4 C x 10 sqmm cable

Supply & fixing of Lug for 4C x 10 sqmm Cable

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed including medium class PVC conduit/casing capping, with modular switch, modular plate, suitable box , ceiling fan rose and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. including PVC conduits, Bends, and all fixing accessories. Group A

Secondary point wiring light to light looping with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. including PVC conduits , Bends and all fixing accessories.

Supplying and fixing the 1 or 2 Modules, PVC box, modular base & cover plate for modular switches in surface / concealed, etc. as required.

Supplying and fixing the 8 Modules, PVC box, modular base & cover plate for modular switches in surface / concealed, etc. as required.

Supplying and fixing the 6 Modules, PVC box, modular base & cover plate for modular switches in surface / concealed, etc. as required.

Supplying and fixing the 6A/16A modular switch on the existing modular plate & switch box including connections etc. as required.

Supplying and fixing the 6A/16A modular socket on the existing modular plate & switch box including connections etc. as required.

SITC of Cat 6 type I/O with RJ 45 socket in the provided Box, including faceplate, and fixing screws, having the compliance/certifications for ISO 9001:2015 & ROHS

SITC of Telephone socket (RJ -11) type with faceplate and fixing screws.

Supply & laying of CAT-6 cable through provided casing-capping, PVC conduit all as directed by EIC.

Supply & Fixing of 25 mm size PVC rigid conduit with spacers & saddles screws, rawal plug etc. along with all accessories complete in all respect on any hard surface/wall/trench/ceiling etc. Compete as per instruction of EIC.

Supply & Fixing of casing capping of 1.25Inch size with screws, rawal plug etc. along with all accessories complete in all respect on any hard surface/wall/trench/ceiling etc. Complete as per instructions of EIC.

Providing & installation of analogue telephone instrument

Providing, fixing & commissioning of 1200 mm ceiling fan, colour as per requirement including down rod, double ball baring etc all as per instructions and as directed by E-I-C, ES.

Supply, fixing, testing and commissioning of the ceiling fan regulator on the modular plates.

Supply & fixing of 225 mm Ex-fan Metal/ PVC body with required accessories

Please Enable Macros to View BoQ information

TECHNICAL DATA SHEET

PART I : DETAIL OF THE AGENCY

PART II : DOCUMENTS TO BE SCANNED AND UPLOADED.

Financial Turn Over Certified by CA

PL. FILL UP AMOUNT & UPLOAD SCANNED COPIES

Average of last 3 years

Profit & Loss Statement Certified by CA

PL.FILL UP AMOUNT & UPLOAD SCANNED COPIES

Latest Bank Solvency Certificate.

Name of Bank

Amount

Date of Issue

List of Similar Works carried out in last 7 years i) Agency for whom exceuted ii) Value of Work iii)Stipulated and Actual time of Completion.

3 similar works works a)

2 similar works works a)

1 similar works works

Bidding Capacity

List of all works in Hand indicating: i)Agency ii) Value of Work iii) Stipulated time of completion/ present position etc.

Typr of works executed since last seven years

List of Construction Plants and Machinery.

Maximum amount of single works executed since lats 7 years

List of Technical Staff.

i) Registration Certificate if any

ii) Certificates of Work Experience /Performance certificates

iii) PAN (Permanent Account Number)

PL. FILL UP REGD. NUMBER & UPLOAD SCANNED COPIES

PL. FILL UP REGD. NUMBER & UPLOAD SCANNED COPIES

PL. UPLOAD SCANNED COPY

Undertaking that the eligible similar work(s) have not been executed through another contractor on back to back basis:

UNDERTAKING

UNDERTAKING: I / We have read and examined the E-Tender Notice for Inviting Pre Qualification (PQ) of Contracting Agencies, Section I, II & III, & other documents and rules referred to and all other contents in the tender documents for the work AND ACCORDINGLY I / We, hereby submit credentials and other documents as are provided for, by, and in respects in accordance with, such conditions so far as applicable.

I/We have downloaded and gone through the pre-bid clarifications issued by the Department after close of sale of tenders and submitting tender accordingly.

崀低䕔›䡔⁅䝁久奃䴠单⁔䥆䱌唠⁐䱁⁌䡔⁅䡓䕅協嘠婉

Form "A" & "B" Financial Information & Bank Solvency

SCAN COPY ATTACHED "YES" OR "NO"

Financial Turn Over Certified by CA

Latest Bank Solvency Certificate.

Financial Arrangements for carrying out the proposed work

崀低䕔›䡔⁅䝁久奃䴠单⁔䥆䱌唠⁐䱁⁌䡔⁅䡓䕅協嘠婉

FORM C : Details of all similar works completed in all respect during the last seven years ending previous day of last date of submission of tenders.(Starting with latest work)

Name of the Agency

* Indicate gross amount claimed and amount awarded by the Arbitrator if any.

Notes:-

i) The agency may submit separate form for giving details of work (completed) for each year to fill up the details as above.

Separate sheets if any shall be numbered in sequence.

ii) The scanned copies of the work orders for each work be uploaded . BOQ shall be furnished at a later date on request.

iii) Certified that the above list of works is complete and no work has been left-out and the information given is correct to my

knowledge and belief.

iv) The hard copy all similar works completed during last seven years ending previous day of last date of submission of tenders.

shall also be submitted on or before due date.

崀低䕔›䡔⁅䝁久奃䴠单⁔䥆䱌唠⁐䱁⁌䡔⁅䡓䕅協嘠婉

FORM D : Details of all works of any nature under execution or awarded (No work shall be left out).

Name of the Agency

i. The agency may submit separate form for giving details of each project (in progress/awarded) and fill up the details

as above. Separate sheets if any shall be numbered in sequence.

ii. The scanned copies of the work orders for each work be uploaded. BOQ shall be furnished at a later date on request.

iii. Certified that the above list of works is complete and no work has been left-out and the information given is correct

to my knowledge and belief

iv. The hard copy all works of any nature in hand and awarded shall also be submitted on or before due date. No works

shall be left out

崀低䕔›䡔⁅䝁久奃䴠单⁔䥆䱌唠⁐䱁⁌䡔⁅䡓䕅協嘠婉

FORM E : Performance Reports of Works (Separate certificates for each work)

Name of the Agency

(i) Stipulated date of Completion

崀低䕔›䡔⁅䝁久奃䴠单⁔䥆䱌唠⁐䱁⁌䡔⁅䡓䕅協嘠婉

FORM F: STRUCTURE AND ORGANISATION

Name & Postal Address of the applicant:

Telephone No./Telex No./Fax No.

Legal status of the applicant (Please tick and attach attested copies of original document defining the legal status)

(a) An individual; (b) A proprietary firm; (c) A firm in partnership (d) A limited company or Corporation

Particulars of registration with various Government bodies (scanned & uploaded photocopy)

Names and Titles of Director & Officers with designation proposed to be concerned with this work

Designation of individuals authorised to act for the organisation

Was the agency ever required to suspend construction for a period of more than six months continuously after you commenced the construction? If so, give the name of the project and reasons of suspension of work.

Has the agency or any constituent partner in case of partnership firm, ever abandoned the awarded work before its completion? If so, give name of the project and reasons for abandonment.

Has the agency, or any constituent partner in case of partnership firm, ever been debarred / black listed for tendering in any organisation at any time? If so give details.

Has the agency, or any constituent partner in case of partnership firm , ever been convicted by a court of law? If so, give details.

In which fields of Engineering construction the applicant has specialisation and interest?

Any other information considered necessary but not included above.

崀低䕔›䡔⁅䝁久奃䴠单⁔䥆䱌唠⁐䱁⁌䡔⁅䡓䕅協嘠婉

Form "G"- DETAILS OF TECHNICAL & ADMINISTRATIVE PERSONNEL TO BE EMPLOYED FOR THIS WORK

Name of the Agency

崀低䕔›䡔⁅䝁久奃䴠单⁔䥆䱌唠⁐䱁⁌䡔⁅䡓䕅協嘠婉

Form H- DETAILS OF CONSTRUCTION PLANT AND EQUIPMENT LIKELY TO BE USED IN CARRYING OUT THIS WORK

Name of the Agency

Presently owned

崀低䕔›䡔⁅䝁久奃䴠单⁔䥆䱌唠⁐䱁⁌䡔⁅䡓䕅協嘠婉