Construction of Panchayat Ghar at Noorkote Pyt. Noorkote Block Poonch Under RGSA Year 2024-25 1st call

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level.1:3:6 (1Cement: 3 COARSE sand: 6 graded stone aggregate 20mm nominal Size)

Providing and Laying Damp Proof course 50 mm thick with cement mortar in 1:2:4 mix, 20 mm nominal size of aggregate and curing complete.

Centering and shuttering including strutting propping etc. and removal of form work; Foundations, footings, bases of columns, mass concreting.

Centering and shuttering including strutting propping etc. and removal of form work; Suspended floors, roofs, landings, balconies and access platforms.

Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:6 (1 Cement : 6 Coarse sand) including Extra Brick Work in superstructure above plinth level upto Floor Five Level

15mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and applying white cement based putty of specifed thickness of approved brand and manufacturer over the Plastered wall surface to prepare the surface even and Smooth complete: 2mm thickness

Providing wood work in frames of Doors,windows, clearstory window and other frames,wrought frames and fixed in position. (sal wood)

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws: Rate per sqm 30mm

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood Rate per sqm 30mm

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.

Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over anunder coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over75mm thick bed of dry brick ballast 40 mm nominal size, well rammed.

Filling by Available excavated earth (excluding rock) in trunches,plinth,sides of fondation etc, in layers not exceding 20 Cm in depth ,consolidation each deposited layer by ramming and watering lead upto 50m and lift upto 1.5 m.

(B) 100mm tower Bolt

(C) 250mmx16 Al Drop

P/L of dry stone soling duly hand packed Icl Carriage

Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:6 (1 Cement : 6 Coarse sand) including Extra Brick Work in superstructure above plinth level upto Floor Five Level

Providing and fixing of pre-cast steel doors and vents complete job (A) Doors

(B) Vents

12mm thick cement Plaster in (1:6) mix

Centering and shuttering including strutting, propping etc. and removal of form work for: (A) Foundations, footings, bases for columns

(B) Suspended floors, roofs, landings, balconies and access platforms.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of Recessed conduit as required. 25mm

Supplying and fixing on exisitng GI Box modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 5/6 amps modular socket outlet and 15/16 amps modular switch, connection, painting etc as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 Amp modular socket outlet and 25 Amp modular with MCB, "C" curve including connections, painting etc. as required.

5/6Amp Switch

3 pin 5/6 Amp socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Bell Push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator), 6 way Double door