Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹57.2 LAccepted-AOC III 6 7 2ND FLOOR ABOVE BANK OF BARODA GOPINATH BAZAR DELHI CANTT 110 010 | DELHI CANTT | NEW DELHI | DELHI | 110010 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹65.0 L+₹7.8 L (13.7%)Rejected-AOC COLABA MUMBAI | YAVATMAL | MAHARASHTRA | 445001 | L2 | Rejected-AOC NOT BEING LOWEST | |
| 3 | L3₹69.6 L+₹12.4 L (21.8%)Rejected-AOC 45 58 5 15A AKSHAYA NARASIMHANAGAR VISAKHAPATNAM 530 024 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 530024 | L3 | Rejected-AOC NOT BEING LOWEST | |
| 4 | L4₹69.8 L+₹12.6 L (22.1%)Rejected-AOC 1 128 A SECOND FLOOR MOHAMMADPUR NEAR BHIKAJCAMA PLACE NEW DELHI 110066 | NEW DELHI | NEW DELHI | DELHI | 110066 | L4 | Rejected-AOC NOT BEING LOWEST | |
| 5 | L5₹75.0 L+₹17.8 L (31.2%)Rejected-AOC NO 94 OLD NO 100 19TH MAIN ROAD 1ST N BLOCK RAJAJI NAGAR BANGALORE 560 010 | BANGALORE | BANGALORE | KARNATAKA | 560010 | L5 | Rejected-AOC NOT BEING LOWEST |
| Sl No | Description | Qty | Unit | Velox Engineering Solutions Pvt Ltd L3 | M/s Dhapola Elevator and Engineering L4 | Escon Elevators Pvt Ltd L2 | MB Enterprises L1 | MAN ELEVATORS COMPANY PRIVATE LIMITED L5 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Disconnecting electrical connection carefully and dismantling of Lift of capacity 13 passengers complete with drive unit, steel wire rope, control panel, ARD system, gear box, lift cabin, landing door, car door with all accessories with control operating panel etc complete all as specified and directed. | 3 | Each Job | 50,000 ₹1,50,000 | 65,000 ₹1,95,000 | 40,000 ₹1,20,000 Lowest | 45,000 ₹1,35,000 | 55,000 ₹1,65,000 |
| 2.00 | Design, supply, installation, testing & commissoning passengers lift, speed 1.5 metre/sec, lift with single speed motor 415 volts, 3 phase, AC 50 Hz supply conforming to IS- 14665, suitable to carry 13 passengers (884 Kgs) and serve upto 5 floor (G + 4 upper floors) having SS car enclosure with AC Variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors,automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (05 Nos, one each in car, Machine room & near Ground floor landing door) complete all as specified and as directed.
Note:
(1) The contractor shall submit the Drawings at the time of sample approval of 13 passengers Lift , data, design calculations, Technical specification for approval of Engr-in-Charge.)
(2) The quoted rate should inclusive of civil and electrical works.
(3) The Lifts shall be installed by the original eqipmentt manufacturer(OEM) only.
(4) The Lifts shall be tested by IEM at the time of installation in the attendance of manufacturer.
(5) The lift well is ready for installations of the lift and designing of the lift shall be as per existing lift well.
Make : OTIS/ KONE/ SCHINDLER/ ESCON/ MITSUIBISHI/IES/EVAAN Elevators Pvt Ltd | 3 | Each Job | 22,00,000 ₹66,00,000 | 21,65,000 ₹64,95,000 | 20,30,000 ₹60,90,000 | 17,95,000 ₹53,85,000 Lowest | 22,50,000 ₹67,50,000 |
| 2.01Detailed specifications:- (1) Location of M/C Room - MRL (2) Travel - G,1,2,3,4 (5 Stops, 5 openings) (3) Available well size - 2500 x 1900 mm (available approximate (4) Power supply - 415V, 3-phase (5) Car Size(clear inside) - 2000 x 1100 mm (approx) (6) Car enclosure : Car panels - SS Hairline finish panels (SS 304 18 guage) with handrail on 3 sides and mirror on rear side of the cabin, Car Flooring: Granite flooring, False ceiling : SS Hairline finish ceiling with axial fan, Car illumination : LED Lights. (7) Car entrance - center opening automatic doors SS hairline finish header. Make: Genises/Wittur (8) Landing entrance - center opening automatic doors SS hairline finish in all floors. Make: Genises/Wittur (9) Clear opening: 900mm wide x 2000 mm height (approx) (10) Control: Advance micro process controller with ARD down collective (11) Car indicator: Digital indicator with 7 segment Display, up-down arrow maintenace indication. (12) Landing Indicator: Digital indicator with 7 segment display, up-down arrow & maintenace indication. (13) Pit height: 1500 mm(apporox) (14) Lift to be adjusted in hoist way of size (Lift manufacturer shall inspect & quote accordingly. (15) Operation : Simplex, Full selective Collective system with attendant or without attendant. (16) Overhead height : 4800 mm. | ||||||||
| 2.02(17) Machine type and Location : Gearless machine in machine room located above the above hoist way. (18) Auxiliary : Single phase 220 volts, 50 Hz, AC. (19) Provision of SS Hairline finish with square LED for car lighting. (20) Provision of Round hand rail in stainless steel finish provided on rear wall of car. (21) Car Design : All car walls in 1.2 mm thick stainless steel hairline finish. (22) No of entrance : Front opening in all landings. (23) Landing operating panel : individual landing operating panel for each elevator. (24) Door safety : Full height infra red curtain. (25) Clear opening : As per IS 14665 : 2000 (26) Automatic Rescue device in case of power faliure. (27) Alarm button, Adjustable door open time ,Car fan,Door open and door close buttons in car operating panel,Blower fan in car for ventilation, Anti-nuisance (empty car) ,emmergency light, infrared screen for car door, Attendant control, Home landing,Door closing retries. (28) Voice announcement unit in English language at each floor with music during operation time in car ,intercom. (29) motor overheat protection, phase faliure and phase reversal protection etc.all specified by manufacturer. (30) Repair/Modify the old elevator shaft & pit/ escalator pit duly plastered, white washed, waterproofed, clean/ clear elevator pit/escalator pit, with shaft/pit dimensions as per approved General Arrangement Drawings (“GAD”) and within tolerance level and complete in all aspects without any further need of modification/rectification of shaft, pit, overhead, and entrance wall etc. | ||||||||
| 2.03(31) Repair and maintenance of adequate light points/ lighting and lux level inside elevator shaft (including at each landing, machine room and the elevator pit)/ escalator pit. (32) Provision of Vinyl flooring in Lift car with print. (33) Supply of shaft reduction channels. (34) Installation of shaft reduction channels. (35) Provision of Direction and position indicator in car. (36) Provision of Emergency alarm and Fireman switch. (37) Provision of Three way hands free press & speak intercom. (38) Provision of Full height Infra red safety curtains with criss cross beams. (39) Provision of Pit ladder. (40) Provision of Emergency light with rechargeable battery. (41) Provision of Adjustable guide shoes. (42) Provision of luminous Braille buttons with dot matrix display for direction and position indication. (43) Provision of Over speed governor. (44) Provision of Overload warning indicator audio & visual. (45) Provision of Automatic phase reversal protection. (46) Provision of Manual rescue Operation. (47) Provision of Automatic rescue device/automatic landing device to be operated with maintenance free batteries for safe landing as specified. (48) Provision and fixing of support structures, hoisting beam/ hook fixed in the roof slab of the machine room, as required. (49) No spare parts and consumables shall be supplied by the department. | ||||||||
| 3.00 | Taking up aluminium strip and supply & fix aluminium strip 25mm x 4mm complete with saddles and fixing screws for fitting the strip. complete all as specified and directed. | 90 | Rm | 170 ₹15,300 Lowest | 455 ₹40,950 | 400 ₹36,000 | 220 ₹19,800 | 1,000 ₹90,000 |
| 4.00 | Taking down earthing and M&L for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized strip 25 X 4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to OH conductor on pole/ Panel/ main switch board etc all as specified or indicated and testing on completion including provision galvanized strip protected by 40 mm bore, light grade pipe and watering pipe shall be 20 mm bore medium grade GI pipe including excavation & earth work, PCC pit with RCC cover, charcoal, salt, funnel, GI strip and protection pipe upto 7.5 mtr complete all as specified and directed. | 6 | Each | 15,000 ₹90,000 | 9,800 ₹58,800 | 18,000 ₹1,08,000 | 7,500 ₹45,000 Lowest | 25,000 ₹1,50,000 |
| 5.00 | Taking up UG cable of any size and Supply and lay cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables ( heavy duty) 1100 volts grade with standered aluminium conductor of following sizes 25 sqmm 4 Core complete all as specified and as directed. | 170 | RM | 350 ₹59,500 | 650 ₹1,10,500 | 350 ₹59,500 | 325 ₹55,250 Lowest | 800 ₹1,36,000 |
| 6.00 | Taking down MCCB of any size and S & F MCCB DB Vertical TPN 12 way 'A' frame,including MCCB TPN 125 Amp breaking capacity 25 KA- 02 nos, double door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match complete all as specified and directed. | 3 | Each | 7,000 ₹21,000 | 5,600 ₹16,800 | 10,000 ₹30,000 | 3,500 ₹10,500 Lowest | 18,000 ₹54,000 |
| 7.00 | S & F MCB SP 6-32 Amps, 'C' series, 240 V complete including making conections and traking down MCB of any size complete all as specified and directed. | 108 | Each | 300 ₹32,400 Lowest | 650 ₹70,200 | 600 ₹64,800 | 675 ₹72,900 | 1,500 ₹1,62,000 |
Tender Value
Refer Docs
EMD Value
₹1.4 L
Closing Date
14 Nov 2025, 6:00 pmClosed
COL RAJENDER KUMAR
CWE AF NORTH BANGALORE BELLARY ROAD JC NAGAR POST
SPECIAL REPAIRS TO LIFT OF BUILDING NO 34, 35 AND 36 OF IAMOE UNDER GE (AF) MARATHAHALLI
2025_MES_735959_1
87598CWEAFNMAR
Open Tender
Civil Works
Item Rate
270 days
GE (AF) MARATHAHALLI
AS PER NIT
7 documents required · 7 mandatory
₹1,000
GE (AF) MARATHAHALLI
₹1.4 L
Yes
31 Mar 2026
17 Oct 2025
21 Nov 2025
18 Oct 2025
14 Nov 2025
7 Nov 2025
18 Oct 2025 - 30 Oct 2025
Disconnecting electrical connection carefully and dismantling of Lift of capacity 13 passengers complete with drive unit, steel wire rope, control panel, ARD system, gear box, lift cabin, landing door, car door with all accessories with control operating panel etc complete all as specified and directed.
Design, supply, installation, testing & commissoning passengers lift, speed 1.5 metre/sec, lift with single speed motor 415 volts, 3 phase, AC 50 Hz supply conforming to IS- 14665, suitable to carry 13 passengers (884 Kgs) and serve upto 5 floor (G + 4 upper floors) having SS car enclosure with AC Variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors,automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (05 Nos, one each in car, Machine room & near Ground floor landing door) complete all as specified and as directed. Note: (1) The contractor shall submit the Drawings at the time of sample approval of 13 passengers Lift , data, design calculations, Technical specification for approval of Engr-in-Charge.) (2) The quoted rate should inclusive of civil and electrical works. (3) The Lifts shall be installed by the original eqipmentt manufacturer(OEM) only. (4) The Lifts shall be tested by IEM at the time of installation in the attendance of manufacturer. (5) The lift well is ready for installations of the lift and designing of the lift shall be as per existing lift well. Make : OTIS/ KONE/ SCHINDLER/ ESCON/ MITSUIBISHI/IES/EVAAN Elevators Pvt Ltd
(17) Machine type and Location : Gearless machine in machine room located above the above hoist way. (18) Auxiliary : Single phase 220 volts, 50 Hz, AC. (19) Provision of SS Hairline finish with square LED for car lighting. (20) Provision of Round hand rail in stainless steel finish provided on rear wall of car. (21) Car Design : All car walls in 1.2 mm thick stainless steel hairline finish. (22) No of entrance : Front opening in all landings. (23) Landing operating panel : individual landing operating panel for each elevator. (24) Door safety : Full height infra red curtain. (25) Clear opening : As per IS 14665 : 2000 (26) Automatic Rescue device in case of power faliure. (27) Alarm button, Adjustable door open time ,Car fan,Door open and door close buttons in car operating panel,Blower fan in car for ventilation, Anti-nuisance (empty car) ,emmergency light, infrared screen for car door, Attendant control, Home landing,Door closing retries. (28) Voice announcement unit in English language at each floor with music during operation time in car ,intercom. (29) motor overheat protection, phase faliure and phase reversal protection etc.all specified by manufacturer. (30) Repair/Modify the old elevator shaft & pit/ escalator pit duly plastered, white washed, waterproofed, clean/ clear elevator pit/escalator pit, with shaft/pit dimensions as per approved General Arrangement Drawings (“GAD”) and within tolerance level and complete in all aspects without any further need of modification/rectification of shaft, pit, overhead, and entrance wall etc.
(31) Repair and maintenance of adequate light points/ lighting and lux level inside elevator shaft (including at each landing, machine room and the elevator pit)/ escalator pit. (32) Provision of Vinyl flooring in Lift car with print. (33) Supply of shaft reduction channels. (34) Installation of shaft reduction channels. (35) Provision of Direction and position indicator in car. (36) Provision of Emergency alarm and Fireman switch. (37) Provision of Three way hands free press & speak intercom. (38) Provision of Full height Infra red safety curtains with criss cross beams. (39) Provision of Pit ladder. (40) Provision of Emergency light with rechargeable battery. (41) Provision of Adjustable guide shoes. (42) Provision of luminous Braille buttons with dot matrix display for direction and position indication. (43) Provision of Over speed governor. (44) Provision of Overload warning indicator audio & visual. (45) Provision of Automatic phase reversal protection. (46) Provision of Manual rescue Operation. (47) Provision of Automatic rescue device/automatic landing device to be operated with maintenance free batteries for safe landing as specified. (48) Provision and fixing of support structures, hoisting beam/ hook fixed in the roof slab of the machine room, as required. (49) No spare parts and consumables shall be supplied by the department.
Taking up aluminium strip and supply & fix aluminium strip 25mm x 4mm complete with saddles and fixing screws for fitting the strip. complete all as specified and directed.
Taking down earthing and M&L for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to galvanized strip 25 X 4mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to OH conductor on pole/ Panel/ main switch board etc all as specified or indicated and testing on completion including provision galvanized strip protected by 40 mm bore, light grade pipe and watering pipe shall be 20 mm bore medium grade GI pipe including excavation & earth work, PCC pit with RCC cover, charcoal, salt, funnel, GI strip and protection pipe upto 7.5 mtr complete all as specified and directed.
Taking up UG cable of any size and Supply and lay cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables ( heavy duty) 1100 volts grade with standered aluminium conductor of following sizes 25 sqmm 4 Core complete all as specified and as directed.
Taking down MCCB of any size and S & F MCCB DB Vertical TPN 12 way 'A' frame,including MCCB TPN 125 Amp breaking capacity 25 KA- 02 nos, double door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match complete all as specified and directed.
S & F MCB SP 6-32 Amps, 'C' series, 240 V complete including making conections and traking down MCB of any size complete all as specified and directed.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.21 MB
87598Tender.pdf
Tender Documents • 0.49 MB
BOQ_824096.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .