Reinvited for Providing electrification and EI work in House no 6J 8 in PGIMS Rohtak

Amount

( c) Moulded case circuit breakers (HSR 31.12)

Supply and erection of moulded case circuit breaker on wall or on existing pedstal including bounding to earth and necessary connections:-

(ii) 100 amp. To 220 amp. 415 V 10K.A. 3 phase

Supply and erection of miniature circuit breaker/isolator 240/415 V in the existing distribution board including making necessary connections :- (HSR 31.17)

(a) Miniature circuit breakers of 9 K.A. breaking capacity

(ii) 6 amp. to 32 amp. (Single pole)

(ii) 6 amp. to 32 amp. (Single pole with Neutral)

(M) Supply and erection of Fittings and Accessories (HSR 31.18)

(xi) Bakelite angle/straight button holder large size

Supply and erection of under ground cable, loose is existing pipe or trenches complete with necessary connections(HSR 31.26)

(iv) 10 Sq. mm 2 Core Cable (Armoured)

Wiring in existing Conduit pipe (Recessed) for Electrical points. (HSR 31.38)

Wiring only in 1.5 sqmm PVC insulated copper conductor cable in existing conduit pipe and MS boxes covered with 5mm thick backlite sheet including cost of switch, wall socket, ceiling rose etc.

(i) Fan Point

(b) Medium Point

(ii) Light Point

(a) Short Point

(b) Medium Point

(c) Long Point

(vii) 3 pin 5 amp. plug point including earthing the 3rd. pin etc.

(c) Long Point

(viii) 3 pin15 amp. plug point with 4 sq mm PVC insulated Copper conductor cable- including earthing the 3rd. pin etc.

(c) Long Point

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe (HSR 31.40)

(i) Cable size 1.5 sqmm (3/0.81mm)

(iii) Cable size 4 sqmm (7/0.85mm)

(iv) Size 6 sqmm ( 7/1.05 )

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto to the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.41)

(v) 4-way, SP&N (Horizontal) (8+12)

Supply and erection of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including coast of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. (HSR 31.44)

(b) 25 mm dia.

Supply and erection of MS box made of 16G MS Sheet recessed in wall, with arrangement of fixing brass screws including cost of 2 Nos. checknuts of required size and one no. PVC bush for each pipe including all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-charge of work.(HSR 31.49)

(i) With 2 coats of primer

Supply and erection of Socket size rotary step type Electronic regulator for A.C. ceiling fan Anchor make Deluxe model No. 50440 ISI/SSK make PC 561 operated on 120/280 V A.C. supply complete including cutting of existing Bakelite sheet and making necessary connection etc. upto the entire satisfication of the Engineer-in-Charge of the work. (HSR 31.55)