Supply, Installation, Testing and Commissioning of Electrification works for Histopathology Lab at 4th floor of Archive Building, ACTREC

Amount

Electrical panel and cabling for HVAC

Supply, installation ,testing & commissioning the following cable on wall/floor/ceiling/structure member / through excavations or on cable trays or down through PVC pipes, using MS spacers and GI saddles, cable clamp etc. complete in all respect. Cable, conforming to IS: 1554/Part 1/1998, XLPE, Aluminium stranded conductor, armoured, 1100 V class

3.5Cx300 Sq.mm A2XFY Aluminium Conductor from service block to PH 3 emergency panel 01 runs

4x25sqmm A2XFY Aluminium Conductor 01 runs for AC incomer

4x16sqmm A2XFY Aluminium Conductor 02 runs for AC incomer

3.5 c x 35sqmm A2XFY Aluminium Conductor 05 runs

3.5 c x 95sqmm A2XFY Aluminium Conductor armoured for verticle DB

3.5 c x 50sqmm A2XFY Aluminium Conductor armoured 05 runs

Cable glands and lugs

Supply ,Installation,Testing & Commisioning of end termination with brass compression gland and aluminium lugs for 3.5 x 300sqmm cable of PVC insulated and PVC Sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required. for 300sqmm cable as per technical specifications mentioned in tender

SITC of cable gland for 4x25sqmm aluminium cable

SITC of cable gland for 4x16sqmm aluminium cable

SITC of cable gland for 3.5 c x 35sqmm aluminium cable

SITC of cable gland for 3.5C X 95sqmm aluminium cable

SITC of cable gland for 3.5 X 50sqmm aluminium cable

SITC of 25sqmm lugs

SITC of 16sqmm lugs

SITC of 35sqmm lugs

SITC of 95sqmm lug

SITC of 50sqmm lug

Supplying and fixing following ratings 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles including metal enclosure box , earthing and fixing accessories with connections,Testing and commissioning etc. as required. As per technical specifications in tender.

63A 3 Pole + Neutral link MCB including enclosure box for AC

40A 3 Pole + Neutral link MCB including enclosure box for AC

32A 3 pole + Neutral link MCB including enclosure box for AC

20 Amps DP MCB C Curve + Earth including enclosure box

32 Amps DP MCB C Curve + Earth including enclosure box

40 Amps DP MCB C Curve + Earth including enclosure box

63 Amps DP MCB C Curve + Earth including enclosure box

Excavation

DISTRIBUTION BOARDS Supply, installation, testing & commissioning of 500V Distribution Boards as speci- fied , 'i) Copper busbars together with tapped neutral bar for individual phases. , copper earth strip with tapping for EEC , Interconnections and earthing. Sheet steel enclosure suitable for recessed or surface mounting with hinged lockable doors interlocked. Thikness of 1.6mm , Phase to phase barriers in case of 3Ph boards. , 'vii) Necessary MS support frame & painting, labelling, phase indicating lamps with fuses etc. complete.

Lighting & Power Distribution Boards as specified 01 normal + 1 Emergency 12 Way TPN DB light Distribution Board comprising of Incomer : i) 40 Amp TPN MCB+4P TYP-2 SPD 12KA ii) 3Nos, 32Amp DP ELCB(30 mA) Outgoing : i)36Nos 10 Amp SPMCB

Power Distribution Boards as specified Emergency for LAB power points 12 Way TPN DB power Distribution Board comprising of Incomer : i) 100 Amp TPN MCB+4P TYP-2 SPD 12KA ii) 3Nos, 40Amp DP ELCB(100 mA) Outgoing : i)36Nos 16 Amp SPMCB

Supplying and fixing surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of VTPN DB 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s, with provision of Incoming 125 amps TP + Neutral 16 KA MCCB and Outgoing , 63 A TPN MCB Qty 04 Nos and 40 A TPN MCB Qty 04 Nos , interconnection between incomer MCCB and bus bars as required and outgoing MCB . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

SITC of Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable including surface/ recessed PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire including PVC conduicts , bends , and all fixing accessories ( Rate for one mtr circuit i.e. 3 x 2.5sqmm wire) for power points

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduit , bends and all fixing accessoreis as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire FOR POWER POINTS

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduits , bends and all fixing accessoreis as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire FOR POWER POINTS

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable including surface/ recessed medium class PVC conduits , bends and all fixing accessoreis as required. 3 X 4 sq. mm + 1 X 4 sq. mm earth wire FOR POWER POINTS

Point wiring for lighting

Supply ,Installation,Testing & Commisioning of LED shaped 36 Watt 2ft x 2ft Premium Range Recessed Downlighter having pressure die-cast aluminimum housing with white front bottom frame suitable to following features. LED fixture to be fixed surface of concealed as per site requirement. - Luminaires suitable to Aluminium metal grid ceiling or Gypsum or POP, -Minimum System Lumen output 1800 lumens -In built electronic LED pre wired driver, -Luminaire shall be with special translucent --High Surge Protection:-2.5kV. -High diffuser>85%, -Provision of Spring loaded Mounting clips. -Opal Translucent cover/Poly Carbonate reflector. -CRI>80,THD<10%. -High Efficacy gretaer than or equal to 100 lm/watt, -Provide Uniform low glare lighting non yellowing/PMMA lens for better light distribution, -Operatable voltage - 220-240 V,50 Hz, PF>0.9, -Colour Temperature gretaer than or equal to 4000K to 5000K LED concealed square type / round type , seemless, high efficiency and premium range as per technical specification directed by OIC - ES

22W LED square / round light surface/recessed type as per site applications Supply ,Installation,Testing & Commisioning of LED Circular shaped 22 Watt - 24 Watt or equivalent Premium Range Recessed Downlighter having pressure die-cast aluminimum housing with white front bottom frame suitable to following features. - Luminaires suitable to Aluminium metal grid ceiling or Gypsum or POP, -Minimum System Lumen output 100 lumens / watt -In built electronic LED pre wired driver, -Luminaire shall be with special translucent --High Surge Protection:-2.5kV. -High diffuser>85%, -Provision of Spring loaded Mounting clips. -Opal Translucent cover/Poly Carbonate reflector. -CRI>80,THD<10%. -UGR shall be near or equal to 19. -High Efficacy gretaer than or equal to 97 lm/watt, -Provide Uniform low glare lighting non yellowing/PMMA lens for better light distribution, -Operatable voltage - 220-240 V,50 Hz, PF>0.9, -Colour Temperature gretaer than or equal to 5000K.

SITC of UV Light fixture 30 W , 4 feet witn mounting bracket 45Deg. Ceiling rose as required with complete fixing accessories

SITC of Flame proof light Die cast Aluminium 20w Color Temperature: 3500-4100 K, 5000-6500 K. IP Rating: IP66. Aluminium type including all fixing accessories

SITC of 1 phase decorative type Compton make 4 speed wall mounted fan, roller button, having swap facility including all fixing accessories

Supplying and erecting regular/ standard model Ceiling fan of 1200 mm. sweep complete erected in position including fan down rod 1.2 mtr , hooks and all fixing accessories

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections etc. as required.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed including medium class PVC conduit / casing capping , with modular switch, modular plate, suitable GI box , ceiling fan rose and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group A

Secondary point wiring light to light looping with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. including PVC conduits , Bends and all fixing accessories.

Power Points

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in surface / concealed etc. as required. Incuding finishing of the same for concealed fixing with cement , final painting as per actual.

3 Module

6 Module

8 Module

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Modular switch 6A/16A

Modular Socket 6A/16A

SITC of Cat 6 type I/O with RJ 45 socket with Box, faceplate and fixing screws, having the compliance/certifications for ISO 9001:2015 & ROHS

SITC of CAT 6 LAN cable for DATA including required size pf PVC Conduit , bends , and all fixing accessories Supply ,Installation,Testing & Commisioning of of UTP 23 AWG 4 pair CAT 6 LAN Cable to TIA/ EIA 568 B.2.1.in the surface/ recessed steel/ PVC conduit as required.

Telephone

SITC of telephone instrument Called ID as per specifications

SITC of I/O with RJ 11 socket with Box, faceplate and fixing screws, having the compliance/certifications for ISO 9001:2015 & ROHS

Earthing

SITC of Tinned copper earth plate electrode 600 x 600 x 3.15 mm earth station, 2.5 mtr below ground level , 02 Nos copper strip 25mm x 5mm 2.5Mtr from earthing plate to chamber , as per drawing complete with all required materials like Cole, charcoal, salt, brass nut bolts & washers, watering arrangements, GI pipe (B class), concrete chamber, heavy duty cast iron cover plate & excavation in all types of soil in ground refilling & removal excess earth within a radius of 500 mtr. Etc. Note:1.The chamber cover & plate shall be of heavy-duty hinged type & it shall weigh approx. 65 to 75 Kgs. For 450 x 450 mm size & shall be got approved by dept. (6 mm chequred plate with 40 x 40 x 6 mm angle iron frame)2.Plastering shall be done both inside & out side.3.The measurement of resistance of earth station & resistance of complete scheme of earthing layout shall be measured, recorded & got approved by Engg-in-charge.

Supply, Installation, Testing and commissioning of 25 mm x 3 mm COPPER strip on surface or in recess for connections etc as required

Supply, Installation, Testing and commissioning of 25 mm x 3 mm GI strip on surface or in recess for connections etc as required

SITC of GI wire 8 SWG, on surface or in recess for connections etc as required including all fixing accessories

SITC of Metal body continuous duty Exhaust fan 1phase , 230volt , 50HZ, including Louvers as per specifications for following size. The scope also includes making civil cutout for appropriate size of fan and final finishing and painting of the same as per existing

Access control system

SITC of access control system including in out machine bio matric type as per technical specifications mentione din tender documents including supply of Access proximity cards Qty 50 Nos

Removing and refixing of existing lightings fixtures , ceiling fans, switch sockets , data and telephone sockets. as directed by OIC / EIC

Removing and relaying of existing electrical wirings of any size , LAN cables etc. including casing cappings / surface / recessed on wall

SITC of single phase Gyser 3 ltr electric operated including inlet and outlet SS pipe for water connection and including all fixing accessories.

SITC of floor raceway concealed / surface type , SS /GI including floor cutting for electrical wirings from wall to working table on floor and finishing of the same , size 50mm to 150mm. No screws – snap fit assembly of cover speeds up the assembly and removal of cover, if required; Lighter unit weight is easier to handle,

ask enterprises

Daanish Electricals and Sales Pvt. Ltd.