INSTALLATION,/REPLACEMENT TESTING AND COMMISSIONING OF 25000 GPH X 240/300 MTRS HEAD HC PUMP SET ALONGWITH ALLIED WORKS AT HRT STAGE 1st,2ND and 3rdOF LIFT WSS KISHTWAR TOWN

Amount

Installation, testing and commissioning of 25000 GPH x 240 mtr head HC pump set along with allied works at HRT stage 1st of Lift WSS Kishtwar comprising ofLaying of foundation block of size 7.0'x 3.5' x 4' inside the pump room by men of cutting the floor digging the trench for foundation block, disposal of excavated material by head load/ mechanical carriage. Job further includes laying of bed of 1:3:6 cement concrete mix 100mm thick, then providing, fabrication and placing the steel reinforcement for RCC work including cutting, bending placing in position and binding properly. Fabrication of foundation bolt of 25 mm dia and 600 mm in length with threading at one end placing in upright position at required distance as per based frame and welding / binding with steel wire placing the base frame over the steel reinforcement, leveling and making proper alignment then fastening with anchor bolts using hexagonal fastener with washer. The job further includes laying cement concrete Nod( including steel reinforcement, frame work, machine mixing, laying and compacting with vibrator using stone aggregate 20 mm nominal size-1:1.5:3 mix (1 cement, 1.5 coarse sand, 3 graded stone) including binding chemical upto the bottom web of base frame from outside and upto the level top level from inside the base frame then plastering, the exposed surface of the block and curing to achieve the proper strength It also includes filling of sand with proper compaction in layers around the foundation block to absorb the vibrations caused during running the pump. The job Includes shifting of Pumping machinery from Divisional store by mechanical transport and unloading at site of work. Shifting/ handling the machinery upto up room at HRT stage 1st lift WSS Kishtwar. Complete job includes cost of material, labour and carriage charges, consumable and hire charges etc. Complete job.

Fitting the new pump and motor on base frame by way of leveling of pump and motor properly. Making alignment tightening of foundation bolt. Fitting of pump gland after providing and fitting of gland packing and fixing of coupling bolts/ rubber coupling joint. Fabrication / installation of 150 mm dia suction after connecting the suction end of pumping unit by way of providing / fabrication of flanged bend 150 mm dia. Cutting the hole in the wall of pump room and taking out the suction outside the pump room connecting it with GLSR outlet after providing and fitting of 150 mm dia CI sluice valve heavy duty in the suction line. Fabrication and fitting of bends, tail pieces flanges etc. as per site requirement. Fabrication/ Installation of 150 mm delivery line after connecting the delivery ends of the pumping unit with flanged bend and tail pieces as per requirement. Taking out the delivery line outside the pump room after cutting the hole in the pump room. Job includes providing and fitting of NRV and sluice valve 150 mm dia cast steel class 150. Fabrication of tail pieces bends etc. to connecting it with delivery manifold. Job includes cost of material, sluice valve, NRV flanges, carriage, nuts/ bolts and tools and tackles etc. Complete job at site HRT Stage 1st lift WSS Kishtwar.

Fabrication and installation of 300mm dia x 1500mm long delivery manifold at HRT Stage-1st Kishtwar having provision of 150mm dia outlet to be connected with rising main along with installation of 150mm dia NRV/Sluice Valves, 02 No 150mm dia flanged inlets to be connected to pump delivery along with installation of 150mm dia NRV and Sluice valves. The manifold is also to be provided with flanged outlet of 100mm dia to act as washout. The manifold is to be anchored at saddle block by means of clamps of size 80mmx6mm to anchor delivery pipes, inlet pipes and manifold. The job includes loading / unloading / handling of material/ fabricated manifold, carriage to site of work by all means. Complete job including cost of all types of material i.e, flanges, bends,100mm dia pipe, all types of valves, nuts, bolts etc (except 150mm dia MS pipes to be provided by the department)

Complete painting of pumping machinery, pipes in the pump room and testing the pumping unit on full load. Complete job.

AIYAZ AHMAD MIR

MOHD JAMEEL