CWE/CHM-95/2025-26 PERIODICAL SERVICES OF OFFICER MD ACCN IN SEC B AND DEF CIV MD ACCN UNDER AGE B/R-II AT CHANDIMANDIR

Amount

Taking down cement plaster of any description on brick walls or concrete surfaces upto 15 metre height including raking out joints, hacking for key, scrubbing down with water etc., including removal of rubbish etc., complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15 mm thick in cement mortar (CM) 1:6 over brick work or concrete surface finished even and smooth without using extra cement at any height and providing necessary scaffolding, safety precaution and other requisite arrangement complete all as specified and as directed by Engineer-in-Charge.

M&L for Rendering 10 mm thick in cement mortar 1:3 on concrete surfaces up to 15 meter height as in Chajja/ mumty at any positon including necessary scafolding work, finished fair and even without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces upto 15 metre height in CM 1:4, and mixed with water proofing compound as per manufacturer's instruction, finished fair and even complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately as supply only.

Supply only liquid water proofing compound, ISI marked, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including one coat of primer on the surfaces, complete all as specified and as directed by Engineer-in-Charge.

M&L for Repair to RCC sunshades, chajjas, balconies, columns, bands, beams and similar RCC work at any position up to 15 meter height by dismantling loose/ disintegrated portion including necessary scaffolding and safety arrangements including chicken wire mesh of size 12.5 mm x 1 mm securing with clips/ chicken wire mesh wherever required and dubbing out with cement concrete 1:1.5:3, 15 mm to 50 mm thick, using 6 to 12 mm graded stone aggregate to make up and finished the required shape including provision of necessary scaffolding and formwork up to four storey building, if required and finished with 5 mm thick rendering in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Complete removal of existing treatment and applying two coats of Oil bound Distemper, white or tinted, over one coat of primer on surfaces of wall of any height including necessary scaffolding and safety arrangements complete all as specified and as directed by Engineer-in-Charge.

M&L for applying a layer of wall care putty on newly plastered surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old decorated wall surfaces of any description and applying one coat of oil bound distemper of any height including necessary scafolding and safety arrangements complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old decorated ceiling surfaces of any description and applying one coat of oil bound distemper including necessary scafolding and safety arrangements complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old decorated wall surfaces of any description and applying One coat of interior plastic emulsion using hand roller complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old steel and iron surfaces of any description over 10 cm width or girth and one coat of synthetic enamelled paint complete all as specified and as directed by Engineer-in-Charge.

S&F Solid PVC wall lining, consisting of 5 mm thick Plain colour PVC sheet pasted with and including vinyl plastic letters of upto 100 mm height, as ordered by GE inclusive of solvent cement and fixing at site with rawl plugs and screws complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of old decorated concrete/ plastered wall surfaces of any description and applying one coat of emulsion paint (Terracotta/ Shingle Red or any colour as approved) complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of old decorated concrete/ plastered wall surfaces of any description and applying one coat of cement based paint complete all as specified and as directed by Engineer-in-Charge.

M&L for Preparation of old decorated/ plastered wall surfaces of any description and applying one coat of exterior emulsion paint complete all as specified and as directed by Engineer-in-Charge.

SMART PERIODICAL

Complete removal of existing treatment by scrapping of walls, chajjas, ceilings, fins, facias etc. using using mechanical means like mechanical sander etc. with internal dust extraction system including expose sound substrata for further surface preparation prior to painting work all as directed by Engineer-in-Charge.

Material and Labour for widening of cracks from wall/ ceiling surfaces in V Groove upto 5 mm deep by using scrapper blade or angle cutter and filling the crack by applying a layer of acrylic crack filler paste or similar material complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for applying one coat of exterior primer which provides exceptional whiteness and opacity and ensures strong adhesion of the top coat. Priming work shall be carried out post all repair and preparatory works including cleaning the surface by removing loose particles, dust and other foreign materials using water by pressure washer all as directed by Engineer-in-Charge.

Material and Labour for preparation of newly plastered/ old prepared surfaces of wall/ ceiling (chajja/ mumty) and applying 2 coats of acrylic waterproof primer coating which is formulated with acrylic polymers having crack bridging ability of upto 1 mm, tensile strength of 1.8 mpa, 100% elongation and can withstand upto 5 bars hydrostatic pressure to provide better mechanical strength and adhesion to the surface all as per manufacturer's instruction complete. Priming work to be carried out post all repair and preparatory works including cleaning the surface from loose particles, dust and other foreign materials using water by pressure washer all as directed by Engineer-in-Charge.

Material and Labour for mechanically applying 2 coats of modified acrylic exterior emulsion having excellent scrub and peel resistance, superior whiteness, excellent finish, resistance to fading of colours, advanced anti fungal and algal protection against all round weather and paint performance of Minimum 5 Years so as to obtain an acceptable finish all as per manufacturer's instruction and directed by Engineer-in-Charge.

Providing and applying waterproof wall putty (cement-based or polymer-modified as approved) in two or more coats over prepared plastered surface to achieve smooth, even finished surface suitable for uniform application and curing as per manufacturer’s instruction and as directed by Engineer-in-Charge.

Note for Item no. 19.10 to 19.60: (a) The work pertaining to periodical services shall be executed as per MoU between tenderer and manufacturer of paints and their authorised applicator after approval by the GE as per MoU performa attached at Serial page No. 103 & 104. (b) The Contractor shall upload with the documents under cover I "Memoradum of Understanding" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall not be opened and shall be liable to rejected. (c) Scaffolding, trestles, ladders, cradles and protective measures etc, as necessary for execution of work shall be arrenged by the contractor without any extra cost to the department. (d) Authorised applicator of the company with trained painters will only be allowed to execute the work and the applicator will submit the experience certificate from the company. .....Contd..

Contd... (e) The entire quantity of material will be calculated and brought in a maximum 3 phases and will be accepted only post verification of PVs and Challan from the company through Mail. (f) Material will be kept in the custody of MES rep and will be issued to the authorised applicator as per requirement. (g) Packing material/ empty Buckets will not be handed over to the contractor and will be destroyed after completion of work through a BOO. .....Contd

Contd... (g) Buildings will be handed over to the contractor in a phased manner and subsequently to the authorised applicator only after completion of civil work like plastering/ repairing as required. (h) Entire work will be divided into four stages as under and will be certified by a company technical rep whether the stages completed are as per manufacturer’s instruction and passed by Engr-in-Charge/ GE:- (a) State :1 Preliminary Inspection (b) Stage 2: Preparation of surface (c) Stage 3: Priming / Base Coat (d) Stage 4: Final coat of painting .....Contd

Contd... (j) Stage passing register will be properly maintained duly signed by all Concerned. (k) Preparation of plastered or unplastered surface or removal of existing treatment by scrapping of walls, chajjas, ceilings, fins, facias etc. shall be done using mechanical sander with internal dust extraction system for clean environment. (l) All priming/ painting work will be done by mechanical sprayer only. (m) All rates quoted will be inclusive of all scaffolding as and when required as per the schedule attached and no work will be allowed without proper scaffolding, height of each building are as indicated in the list of buildings. (n) The contractor shall submit manufacturer generated 05 years warranty card for each building during submission of RAR and Final Bill. (o) A guarantee amount @ 10% will be kept as reserve till completion of warranty period and will be released thereafter. (p) Any deterioration during the warranty period will be rectified by the manufacturer without any financial effect.

m/s AR Construction co (BID ID -3466782)

M/S Parshant Associates (BID ID -3467150)

JOGINDER NATH GUPTA AND SONS (BID ID -3467185)

MOHAN LAL GUPTA (BID ID -3461479)

V S ENTERPRISES (BID ID -3461627)