Construction of Vehicle Parking Shed in front of NAC office in Ward No-01

Earthwork excavation in hard soil within 50mtr initial lead, 1.5m initial lift including rough dressing and breaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per direction of the Engineer-in-charge.

Filling in foundation & plinth with sand, incl. watering & ramming as per direction of Engr.-in-charge.

C.C.(1:3:6) with 40mm HBHG metal including cost,carriage and royalty of materials .

C.C.(1:2:4) with 12mm CBHG metal including cost,carriage and royalty of materials(Unit-1 cum)

R.C.C work of M-20 grade with 20mm including hoisting & laying including cost,carriage and royalty , tax of materials

Supplying, fitting & placing uncoated HYSD bar reinforcement complete as per drawing and techinical specification with cost, conveyance of rod & binding, wire etc complete.

Providing and Laying Factory made Chamfered edge Cement Concrete Paver Blocks of required strength, thickness & size/shap made by table Vibratory method to attain supperir smoth finish using PU or equivalent moulds, Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand, compacting and properembedding/ laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling joints with Fine sand and cutting of Paver Blocks as per required size/pattern, finishing and sweeping extra sand in footpath, parks,lawns,drive always or light traffic parking and etc. as per direction of Engineer I/C

Supplying, fitting & fixing of Precoated Galvanized iron Profile sheet semi gloss of 1000mm width & total coated thickness 0.50mm in roof drilling hole in wind ties including fixing of ridges valleys, wind ties etc. Complete including cost of sheet & all fitting(per 1 Sq. Mtr.)

Iron works arought and put up at trusess and purlin including fabrication and all cost M.S Pipe 40mm dia 100X100X 5mm

80X80X4.80mm