Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹73.0 L
EMD Value
₹1.3 L
Closing Date
16 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
CWE (SUBS) MUMBAI
Commander Works Engineer Subs NCHC Powai Bhandup Post Office Mumbai 400 078
PREV MAINT/ REPAIRS TO HT INSTLLNS VCB/RMU, CTRL HT CABLES INCL HT DISTR N/W, FIRE FIGHTING SYS, FIRE ALARM SYSTEM AND OTHER MISC E/M ITEMS, SPLIT/ WINDOW TYPE AC AND CENTRAL AC PLANT AND ROOF TOP SOLAR POWER PLANT AT NCHC POWAI UNDER GE (NW)BHANDUP
2026_MES_799229_1
8460/E8
Open Tender
Electrical and Maintenance Works
Item Rate
330 days
BHANDUP
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE (NW) BHANDUP
₹1.3 L
Yes
18 Nov 2026
18 Nov 2026
18 Dec 2026
18 Nov 2026
16 Dec 2026
9 Dec 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M & L for high voltage test of HT cable/ RMU/VCB to remove moisture and to make the cable/VCB/RMU serviceable and to give the report of moisture and relevent data results before and after the test in tabular form complet by using HV test & magger equipments complete. | 20 | Each Job | - | - |
| 2 | Periodical maintenance and servicing through agency authorized by OEM of HT VCB, 11 KV, 400/630/800 Amps of any make installed at various locations including cleaning of all VCB contacts with CT's and replacement of minor parts such as Gaskets, washers, panel heater, indicator bulbs and carry out any other repairs required at site to make the VCB fully functional, complete all as specified and directed (i) Checking of Draw out mechanism/arrangement of VCB (ii)Inspection of isolating Contacts, and decarburizing the male /female contacts, jaws complete and replacement of worn out contacts if any. (iii) Checking of alignment with spout and setting of contact gaps. (iv) Replacement of worn out/defective minor spares parts, lubrication of moving parts of the truck by moly grease. (v) Checking/setting of master control relay, earth fault realy and overload realy. (vi) Also checking ON/OFF/TRIP indication and make it serviceable by necessary checking/repair/replacement of control wiring. Replacement of Push button for open and Close, micro switches, indication lamps. (vii) Decarburizing and re-insulation of complete busbar track system complete in all respect. (viii) Misc works deemed essential to make VCB in perfectly working order.
Note : Major spare parts are to be paid sepratly under respective items here in after, however cost of minor spares shall be deemed to be included in item rate. | 22 | Each Job | - | - |
| 3 | Overhauling and servicing through agency authorized by OEM of HT RMU 11 KV, 1 incoming 2 outgoing 400/800 Amps of any make installed at NCHC Powai including cleaning of all RMU contacts with CT's and replacement of minor parts such as Gasket, washers, panel heater and indicator bulbs and any other repair required at site to make the RMU fully functional, complete all as specified and directed at substation No 1and 3. | 2 | Each Job | - | - |
| 4 | Overhauling and servicing through agency authorized by OEM of HT RMU 11 KV, 2 incoming 2 outgoing 400/800 Amps of any make installed at NCHC Powai including cleaning of all RMU contacts with CT's and replacement of minor parts such as Gasket, washers, panel heater and indicator bulbs and any other repair required at site to make the RMU fully functional, complete all as specified and directed at substation No 4 and Virat and ganga gomti. | 3 | Each Job | - | - |
| 5 | Filtration & Dehydration of transformer oil (at different locations) using ON-LINE filtration plant to achieve dielectric strength minimum 50 KV/ 4mm including testing of oil before and after dehydation, complete all as specified and directed..
Note: 1.Oil samples are to collected from top and bottom of oil tank and test results to be recorded for each sample before and after filteration. | 3,200 | Litre | - | - |
| 6 | Material for topping up to transformer oil conforming to IS 395-1983 (Make : 'Savita', 'Power Oil', APAR) having die electric strength minimum 50 KV at 4mm gap complete all as specified and directed.
Notes : (a) New Transformer oil will be filled in the transformer only after filteration and dehydration of existing transformer oil of the transformer.
(b) Transformer oil shall be supplied in sealed barrel with test result and test certificate. | 1,000 | Litre | - | - |
| 7 | Calibration of relays of HT VCB upto 800 amps capacity by primary injection, replacement of defective operating handles, checking of under voltage, over current relays and replacement of UNSV parts of master relays complete all as specified and directed.
Note : All defective parts examined during primary and secondary injection method will be measured and paid from the respective items. | 15 | Each Job | - | - |
| 8 | Calibration of relays of HT VCB upto 800 amps capacity by secondary injection, replacement of defective operating handles, checking of under voltage, over current relays and replacement of UNSV parts of master relays complete all as specified and directed.
Note : All defective parts examined during primary and secondary injection method will be measured and paid from the respective items. | 15 | Each Job | - | - |
| 9 | Calibration of relays of HT RMU of configuration 01 incoming and 02 outgoing by primary injection, replacement of selector switches, voltmeters, ammeters for HT supply, replacement of defective operating handles, checking of under voltage, over current relays and replacement of UNSV parts of master relays, complete all as specified and directed.
Note : All defective parts examined during primary and secondary injection method will be measured and paid from the respective items. | 2 | Each Job | - | - |
| 10 | Calibration of relays of HT RMU of configuration 01 incoming and 02 outgoing by secondary injection, replacement of selector switches, voltmeters, ammeters for HT supply, replacement of defective operating handles, checking of under voltage, over current relays and replacement of UNSV parts of master relays, complete all as specified and directed.
Note : All defective parts examined during primary and secondary injection method will be measured and paid from the respective items. | 2 | Each Job | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
Tender.pdf
Tender Documents • 1.25 MB
BOQ_896691.xls
BOQ • 3.09 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .