WBPWD/SEWEC /HED /NIQ-03 /2025-26

Amount

Supply, installation,testing and commissioning of 45 KVA, 415V, 50Hz, 3Ø silent new DG Set, comprising of Diesel IC Engine, alternator, separate AMF panel, Base frame, Fuel tank, Battery, CPCB-IV approved Engine & Acoustic Enclosure having following specifications :-

ENGINE

Make : Greaves Power/Kirloskar/Ashok Leyland/Cummins

Engine Type : 4 Stroke

Rated Output : 52 BHP or Higher

Duty : PRIME

Cooling : Water cooled with radiator

Cylinder : 4 inline

Aspiration : Turbo Charged

Type of Governer : Electronic

Fuel Tank Capacity : Minimum capacity 140 Ltrs.

Fuel Consumption at 75% rated Load with Radiator or Fan : 8.6 Ltr. / Hr. or Less

Fuel Consumption at 100% rated Load with Radiator or Fan : 10.7 Ltr. / Hr. or Less

Overload Capacity : 10% overload for one hour for every 12 hours continuous running at full load or better

Engine instrument Panel : Consisting of starting switch with Key, Lube Oil Indicator, water temperature Indicator, RPM indicator and hour meter.

Safety Controls : Emergency Stop, Low Lube Oil Pressure warning/ Shutdown, High Engine Water Temp. warning/ Shutdown, Sensor failure Indicator, Engine overspeed indicator, Battery charging and low battery indicator

Exhaust Silencer : Residential Type

Starting system : 12V. starting system complete with starter motor, charging alternator with rectifier and Cutout as per manufacturer standard.

Battery : Lead Acid, Low Maintenance or SMF and conforming to relevant IS Specification with Low/High Battery Voltage and Weak Battery warning

ALTERNATOR

Make: Crompton Greaves /Kirloskar/ Ashok Ley Power / Cummins

Rating : 415 V, 3Ph. 50 Hz. , 45 kVA, 1500 rpm

Type : Brushless, self excited and self regulated

Insulation : Class H

Protection : screen-protected drip proof with Min.IP-23 degree of protection

Voltage Regulation (max) : ±1%

Winding connection : Star with Neutral

Total Distortion factor : Less than 3%

Total Harmonic distortion in output waveform : < 5%

AMF PANEL

Cubical type floor mounted AMF panel made from 16 SWG Sheet Steel, duly pretreated, powder coated painted and aesthetically finished, suitable for controlling of 45 KVA DG set having following specification/features.

i) 63A, 36 kA MCCB with O/L, S/C, E/F protection and microprocessor based protection release , U/V release etc. - 2 Sets

ii) In Built By-Pass switch for rated capacity

iii) On -delay timer for load change over

iv) On-delay timer for engine shut off

v) Engine On-Off switch (Push button type)

vii) Minimum five number indicating lamps to indicate 'mains ON', 'load on mains', Set running', 'load on set' and 'battery charger on'.

viii) Audio visual alarm for 'Low lubricating oil pressure', 'High water temperature, Start failure', and DG over load'.

x) Microprocessor based relay with composite meter for digital display of following.

Generator voltage/AC Mains voltage.

Generator Current in all phases

Frequency

Power Factor

Energy

Indication for alternator supply

Running time indications number of hours of operation and service intervals, service due indications

The AMF panel must be designed to ensure trouble free performance and ensure switching over Electrical Load to DG within 15 (fifteen) second from the instant of mains failure.

ACOUSTIC ENCLOSURE

The DG set should have integrated acoustic enclosure at the manufacturing state itself. High quality acoustict enclosure must be certified as per CPCB-IV norms.

BASE FRAME

Common iron channel fabricated base frame containing the engine and alternator, mounted on AVM pads and having provision for lifting Hook.

TERMS & CONDITIONS

(i) Rate should be quoted inclusive of all applicable taxes and Duty etc.

(ii) All materials, equipments & accessories must conform to relavent IS /IEC specifications. The DG Set to be supplied must be from the authorized OEM of the respective Engine Manufacturer.

(iii) Nacessary manufacturer's test certificate for Desiel Engine, Alternator etc. Will have to submit in triplicate copy during delivery of the equipment.

(iv) Copy of "Type Approval Certificate" and Certificate of "COP" must be produced at the time of delivery issued from competant Authority (As per CPCB-IV).

(v) Circuit Diagram for AMF Panel must be submited from the Manufacturer/OEM.

(vi) The entire set must be warranted atleast 15 months from the date of Delivery/12 months/ 5000 Hrs from the date of Commissioning whichever is earlier. However Engine & Alternator should be warranted of 2 years/5000 Hrs, whichever is earlier.

(vii) Necessary Control cable (12 Core 2.5 Sq.mm stranded armour copper cable) for connecting DG & AMF Panel -- 5 mtrs. to be supplied on Free of cost

S & delivery 70 sq. mm. single core multistrand PVC insulated flexible Cu cable and uPVC pipe (for neutral earthing)

Laying only Cable above 50 sq. mm. but not exceeding 400 sq. mm. through existing RCC/ Hume/GI Pipe/open masonary trench for single, 2, 3, 3½ and 4 core. [3(b)/F-1]

Finishing the cable ends by crimping method incl. S&F copper socket, insulating tape and jointing materials etc. as required suitable for single core 70 sq. mm. copper wire.

Filling of HSD oil for initial refill with transportation.

Supply and delivery of best quality oil hand pump with 1" dia PVC flexible pipe (10 mtr. approx.)

Supply and delivery of 200 ltr. Capacity heavy gauge MS sheet barrel

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With TATA-Medium GI pipe as per GS. [ 2(a)/G-1]

Connecting the equipment with 25mm x 6mm galvanised MS hot dip flat on wall/floor as to GS. [5d/G-3]

Shakti Industries (BID ID -6398474)

ATREYA INDUSTRIAL POWER SOLUTIONS LLP (BID ID -6397570)