RENOVATION/IMPROVEMENT TO ASHOKA AT OFFRS MESS AND CERTAIN OTHER MINOR/REVENUE WORKS AT AFS BIHTA

Amount

Excavation in post holes (or similar holes) Each n exc 0.50 Cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance of n exc 50m and making good surface in soft/loose soil, complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep for foundation etc or for shafts, column footings or for laying cables etc not exc 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed.

M&L PCC 1:4:8 type D-2, using 40 mm graded stone aggregate, as in foundation, filling, mass concreting etc, complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in walls, toe walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases), complete all as specified and directed.

M L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc.; vertical or to batter for flat surfaces, fair finished surfaces, complete all as specified and directed.

M&L PCC 1:3:6 type C-2, using 40 mm graded stone aggregate, as in foundation, filling, mass concreting etc, complete all as specified and directed.

M&L mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.

S&F 5 to 10 mm dia MS screw bolts (Machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal or square nut, length of bolt exc 5 cm but not exc 10 cm long, complete all as specified and directed.

Supply only Chain link MS galvanised fencing (3 to 4 mm dia), any size or type, complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standard rails, straining bolts etc, including provision of binding wire, complete all as specified and directed.

S&F Mild steel round bars, 10 mm dia and over, cut to length, bent to shape and provided as support for strengthening of chain link fencing including necessary welding, riveting etc, complete all as specified and directed.

M&L for preparing new steel surfaces of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

M&L for preparing new steel surfaces of any description not exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified and directed.

Returning filling in soil including spreading, leveling, watering and well ramming in layers not exc 25 Cm, complete all as specified and directed.

Removing excavated materials (soil) not exc 50 m distance and depositing where directed at a level not exc 1.5 m above starting point, complete all as specified and directed.

M&L for galvanised, 2 strand steel barbed wire 2.24 mm dia, barbed with 2.00 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rail, straining bolts, incl securing or tying at crossing with and provision of galvanised MS wire, staples or steel pins etc, complete all as specified and directed. (each line wire to be measured).

M&L for applying two coats of cement based paint over a coat of primer on new previously undecorated surfaces of walls including preparation of surfaces, complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work new or old, like ends of posts, backs of chowkhats etc area exc 0.10 Sqm and n.exc. 0.50 Sqm and treating with tar or coal tar black paint, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in cills, coping, benching on chajjas, roof kerbs, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary Formwork, complete all as specified and directed.

S&F mild steel framed work as in grills, grating etc. with end of bars shouldered and/or riveted, or forged into spikes: framed guard bars: barred iron doors: ladders: frame balusters: walk ways: railing: frame work of water tanks and similar works conforming to Fe-290 Grade-E-165, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L Glazed ceramic premium quality designed coloured tiles in vertical surface such as skirting/dados etc size 300X450X6 to 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 15 mm thick cement plaster in 1:4 CM on brick or concrete surfaces, complete all as specified and directed. Note : Shade, colour and design shall be approved by GE.

M&L joint free non - skid premium quality coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles, laid over and including 15 mm screed bed in Cement mortar 1:6 complete, all as specified and directed. Note : Shade, colour and design shall be approved by GE

S&F in repair corner glass shelf decorative type of size 450x125 mm with toughened glass with brass bracket guard and railing complete all as specified. Model No MARVEL011

S&F in repair decorative type looking mirror 4 sq feet round mirror 6 mm thick of make modiguard all as specified. Model No MODIGUARD6MM Note : Design and pattern shall be approved by GE

S&F for decorative type Magnifying mirror of 200 mm round glass with brass assembly, complete all as specified and directed. Make - Corsa, Model No ALD-5302

S&F in repair rimless single piece vitreous china white WC with UF soft close slim seat cover, hinges, dual flush cistern fitting, fixing accessories and accessories set of size 380x670x765 mm complete all as specified. Make Jaquar Model No FSS-WHT-29853S300UFSM

S&F in repair vitreous china white wash hand basin (Table top) of size 565x425x140mm all as specified. Make - Jaquar, Model No KUS-WHT-35935

S&F bath panel anti finger print stainless steel body, inbuilt ABS top shower with 60 nozzles, 2 moveable ABS body massage jets, hand shower with flexible hose, brass spout, shelf, thermostatic mixer with diverter, 40 cm stainless steel braided hose complete all as specified. Make Jaquar model No JPLSSFST88158B

S&F in repair chrome finish decorative type towel ring square shape with round flange all as specified. Make - Jaquar, Model No- ACN-1121N

S&F in repair 15 mm bore decorative type CP brass angular stop cock with wall flange, complete all as specified and directed. Make Jaquar, Model No-FLR-5053N

S&F in repair 15 mm bore decorative type CP brass concealed stop cock and flush cock with fitting, sleeve operating lever and adjustable wall flange, cast copper alloy, complete all as specified and directed. Make Jaquar Model No-FLR-5083NK

S&F in repair chrome finish towel rack 600 mm long with lower hanger, complete all as specified and directed. Make - Jaquar, Model No AQN 7781A

S&F in repair 15 mm bore fancy type bib cock chromium plated brass, half turn with wall flange, complete all as specified and directed. Make Jaquar Model No FLR-5047N

S&F in repair 15 mm bore fancy type brass cromium plated single lever basin mixer without popup waste with 450 mm long braided hoses and fittings, complete all as specified and directed. Make Jaquar, Model No KUP-35011 BPM

S&F shower enclosure with two fixed glass and one openable door 8 mm thick glass fixed with front panel chrome finish including fixing arrengment as per manufacturers instruction, complete all as specified and directed. Model No JSE-CHR-R840G1620L

Taking up/down 15 mm bore dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up/down 20 mm bore dia steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15 mm dia GI tubing, medium grade, with all GI fittings and fixed complete to walls, ceilings and floors, complete all as specified and directed.

S&F 20 mm dia GI tubing, medium grade, with all GI fittings and fixed complete to walls, ceilings and floors, complete all as specified and directed.

S&F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and water tank nipple, complete all as specified and directed.

Dismantling cast iron or reinforced concrete drain pipes 100 mm dia, jointed in CM and taking out from trenches if required, complete all as specified and directed.

Dismantling cast iron or reinforced concrete drain pipes 75 mm dia, jointed in CM and taking out from trenches if required, complete all as specified and directed.

S&F spun cast iron soil, waste and vent pipe 100 mm bore in any length with or without ears with cement joints, laid in trenches or in floor, complete all as specified and directed.

S&F spun cast iron soil, waste and vent pipe 75 mm bore in any length with or without ears with cement joints, laid in trenches or in floor, complete all as specified and directed.

S&F spun cast iron soil, waste and vent pipe 100 mm bore in any length with or without ears with cement joints, fixed to walls, complete all as specified and directed.

S&F 100 mm dia CI bend (any radius), diminishing pieces or tapers (larger dia measured), complete all as specified and directed.

S&F 75 mm dia CI bend (any radius), diminishing pieces or tapers (larger dia measured), complete all as specified and directed.

S&F cast iron cowls of 100 mm bore pipe, complete all as specified and directed.

S&F in repairs of 75 mm Cast iron floor trap, with stainless steel grating of 75mm size including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed.

Dismantling water storage tanks and removing to store (capacity exc 500 & n exc 1000 ltrs), complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethylene water storage tanks with all fittings of GI (cylindrical vertical with closed top) hoisted and fixed in position, complete all as specified & directed.

S&F 20 mm bore brass ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.

M&L premium quality double chraged coloured vitrified tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles, laid over and including 15 mm screed bed in Cement mortar 1:6, complete all as specified and directed. Note : Shade, colour and design shall be approved by GE.

M&L premium quality double charged coloured vitrified tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in walls set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade, complete all as specified and directed. Note : Shade, colour and design shall be approved by GE

S&F anodised aluminium powder coated (minimum thickness of powder coating is 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing and grills etc, complete all as specified and directed.

S&F anodised aluminium powder coated (minimum thickness of powder coating is 50 micron) door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr-In-Charge.

S&F anodised aluminium powder coated (minimum thickness of powder coating is 50 micron) window and ventilator shutters any type without shash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc. complete all as specified and directed by Engr-In-Charge.

Supply only figured glass, pin head type, 6 mm thick, ordinary quality, cut to size as required at site, complete all as specified and directed. (Cost of fixing of glass shall be deemed included in the unit rates of aluminium door/window shutters)

Supply only sheet glass 4 mm thick, ordinary quality, cut to size as required at site, complete all as specified and directed. (Cost of fixing of glass shall be deemed included in the unit rates of aluminium door/window shutters)

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

S&F mortice lock of brass 4 levers, vertical type, size 75 mm, complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section in door shutters only, complete all as specified and directed.

Dismantling wall/ceiling boards (fibre pulp insulation etc.) or insulations boards /slabs/blankets any thickness incl aluminium / GI snap grid of any description, complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling, size of grid 605x605 mm, complete all as specified and directed.

M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long, complete all as specified and directed.

S&F Gypsum board 12 mm thick in ceiling fixed with screw as per manufacturer's instructions with level difference in two stages and pattern as approved by GE, complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

Taking down of chowkat with shutter without taking off shutters from the frame exceeding 1.5sqm each but not exceeding 4 sqm each, complete all as specified and directed.

Taking down cement plaster any description/thickness on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finishing surfaces even and smooth without using extra cement, complete all as specified and directed.

Material & labour for preparation of newly plastered surfaces of walls and applying 2 mm thick wall care putty in layers of opposite direction for making the surface even & smooth and applying two coats of distemper oil emulsion over a coat of alkali resistant primer, complete all as specified and directed.

Material & labour for complete removal of existing treatment of wall surfaces and applying 2 mm thick wall care putty in layers of opposite direction for making the surface even & smooth and applying two coats of distemper oil emulsion paint over a coat of alkali resistant primer, complete all as specified and directed.

S&F in repair fancy type chrome finish health faucet with 8mm dia and 1.2 mtr long flexible tube and wall hook, complete all as specified and directed. Make - Jaquar, Model No ALD-573

S&F fancy type chrome finish Double coat hook, complete all as specified and directed. Make - Jaquar, Model No- AQN-7761

S&F fancy type chrome finish soap dish holder, complete all as specified and directed. Make - Jaquar, Model No- AKP-35731

S&F fancy type chrome finish tumbler holder, complete all as specified and directed. Make - Jaquar model No- AKP-35741P

S&F fancy type chrome finish toilet roll holder with stainless steel flap, complete all as specified and directed. Make - Jaquar model No- AKP-35753PS

S&F sign board of size 90 cm x 60 cm, made out of aluminium composite panel board 3 mm thick having PVDF coating, skin thickness not less than 0.25mm thick, high intensity reflective maintenance free sheet including writing letters/site map on both side of sheet as per requirement/location with high reflective sheet/tape of make 3M, colour & design as approved including stainless steel frame work with vertical pipes (2 Nos) as per 319 AISI, the frame consisting of SS squre pipes of size 25 mm x 20 mm having thickness1.5 mm and vertical post made of SS 50 mm dia pipe, 1.5 mm thick, including fixing the legs of sign board in PCC block (B2 1:2:4) of size 500x500x600 mm complete all as specified and as directed. Note: 1. Height of letter exc 150 mm but n exc 300 mm all as per user requirment 2. Rate inclusive of necessory excavation & PCC work 3. Top of board shall be fixed at 2.10 mtr height from GL.

All as per item No 79 above, but size of board 75 cm x 45 cm, complete all as specified and directed.

S&F road studs of ABS material, size 100mm x 100mm x 18.5 mm with two side acrylic reflectors etc, complete all as specified and as directed. Model No : DA 978, Make DARK EYE.

S&F Delineators of ABS round body fitted with 2 Nos 100 mm or 65 mm dia highly reflective reflectors made out of PMMA and mounted on MS pipe of 50 duly powder coated, anti rust & anti theft steel net, complete all as specified and directed. Model No : DA 952 GP, Make DARK EYE.

S&F 3-4 mm thick, wall panelling of PVC foam profile 100-200 mm wide with tongue and groove joints and ribs pattern of depth 10-12mm incl PVC beading at corner, bottom and at end of panelling, framing shall be done from solid PVC foam batten/ Metal section as per manufacturer's instructions, design and pattern as approved by GE, complete all as specified and directed. (Make : Accucel or equivalent)

Material and labour for concealed point wiring using approved colour coding (Phase red, neutral-black, earth-green) complete with FRLS PVC insulated and unsheathed stranded copper conductor cable 1.5 Sqmm single core conforming to IS 694 including medium duty concealed unplasticised PVC conduit conforming to IS 9537 (Part-3) and ISI marked not less than 20mm dia with concealed in wall pressed steel terminal box of not less than 1.5mm thick of required size including painting terminal boxs inside and outside with two coat of synthetic enamel paint over one coat of red oxide primer with top cover 3mm thick bakelight laminated sheet with brass screws and cup washer with all assessories including FRLS PVC insulated and unsheathed stranded copper conductor cable 1.5 Sqmm single core in green colour as earth wire connected to earth duly complete including taking down of old unsv point wiring with all accessories, complete all as specified and directed for the following: - (a) one light/fan/exhaust fan point controlled by 1 No one way 5/6 Amp switch.

(b) One 3 pin/5 pin socket outlet 5 Amp controlled by 1 No. one way 5/6 Amp switch on same board alongwith other switches, fan regulator etc.

(c) One 3 pin/5 pin socket outlet 5 Amp controlled by 1 No one way 5/6 Amp switch on independent board.

Material and labour for point wiring using approved colour coding (Phase red, neutral-black, earth - green) complete for one socket outlet 15 Amp on independent board with FRLS PVC insulated and unsheathed stranded copper conductor cable 2.5 Sqmm single core conforming to IS 694 including medium duty concealed unplasticised PVC conduit conforming to IS 9537 (Part-3) and ISI marked not less than 20mm dia with concealed in wall pressed steel terminal box of not less than 1.5 mm thick of required size including painting terminal boxs inside and outside with two coat of synthetic enamel paint over one coat of red oxide primer with top cover 3 mm thick bakelight laminated sheet with brass screws and cup washer with all accessories including FRLS PVC insulated and unsheathed stranded copper conductor cable 2.5 Sqmm single core in green colour as earth wire connected to earth duly complete including taking down of old unsv point wiring, complete all as specified and directed.

S&F modular switch 1 way 6A 1 module, 240 Volts with suitable size of sheet and cover complete all as specified and directed

S&F socket outlet, 6A - 5 pin, combined 2 module with suitable size of sheet and cover complete all as specified and directed.

S&F modular switch 1 way 16A, 1 module 240 Volts with suitable size of sheet and cover complete all as specified and directed.

S&F for socket outlet, 6A/16A - 6 pin combined 2 module , with suitable size sheet and cover complete all as specified and directed.

S&F lamp holder PVC/Polycarbonate body with back plate suitable for batten fittings, 230 volts AC, complete all as specified and directed.

S&F ceiling rose, surface bakelite, 230 volts AC, 2 to 3 terminals, complete all as specified and directed.

Supply and fixing LED batten type tube light complete fitting 1 x 10W, 220V, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and complete all as specified and directed by Engr-in-Charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc, complete all as specified and directed.

S&F wall mounted fan, copper wound motor, silent operation, 400mm sweep 1320 RPM pull chain control, acrylonitrile butadiene styrene type specifically for bedroom/living room complete all as specified and directed

S&F LED bollard made up of extruded aluminium with PC diffuser with fitting on GI pipe 12 Watt with ordering code SLE BL 12W-BLK800 of Make Surya or equivalent as approved, complete all as specified and directed.

Material and labour for sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS stranded copper conductor cable with and including continuous earth wire of size 4.0 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS stranded copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade, ISI marked complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing surface complete all as specified and as directed by engr-in-charge.

S&F sheet metal enclosure with socket plug top and MCBs single pole with a two pin and earth plug and socket complete with one single pole MCB of 'C' series of capacity 20 Amps including taking out the old one, complete all as specified and directed.

Supply and fixing LED luminiare 600mm x 600mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor wire of suitable size, complete all as specified and directed.

S&F sheet metal enclosure (MCB Distribution Board) when MCB's to be used single pole and neurtal 8 ways 220 volt with 100 Amp rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plates, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching, complete all as specified and directed including taking down old one.

S&F MCBs single pole, 10 KA, 32 Amp to 40 Amp 240 Volts and of 'B' series with required wiring connections and lugs etc and erecting in provided enclosure/distribution board MCBs shall be of current limiting type ISI marked conforming to IS 8828-1996 including taking down old one, complete all as specified and directed.

S&F MCBs DP, 10 KA, 32 Amp to 40 Amp 240 Volts and of 'B' series with required wiring connections and lugs etc and erecting in provided enslosures/distribution board MCBs shall be of current limiting type ISI marked conforming to IS 8828-1996 including taking down old one complete all as directed.

Supply and fixing LED flood light 70 Watt 230 V AC outdoor type with thermal management in multiple optics and equipment with IP66 protection, with impact and corrosion resistant complete with driver and lamp including all fixing arrangements on metallic sheets, complete all as specified and directed.

S&F sheet metal enclosures (MCB Distribution board) when MCB’s to be used, single pole and neutral, 2 ways, 220 volts with 200 amps rated bus bar, IP-43 rated, single door with bus bar neutral link earth bar, Din rail, necessary blanking plates, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching, incl taking down old one, complete all as specified and as directed.

S&F 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than one metre apart including 4 mm dia GI supsension wire one twin core flat cable using stranded aluminium conductor of 4 Sqmm size, complete all as specified and directed.

Supply, fixing & jointing 15 mm bore galvanised iron water tubes 'medium grade' with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed to poles/walls or laid under roads/drain/nallah/floor etc including flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.

M&L for GI tubing medium grade 40mm bore, fixing in upright position of size 1.0/1.2 mtr embedded in PCC foundation for fixing of bollard light, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate mechanically crushed stone aggregate for mass filling in coping of pole including form work, complete all as specified and directed.

PARIWAR INFRATECH