Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance NA | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹4.2 L
EMD Value
₹4,200
Closing Date
25 Jul 2025, 3:00 pmClosed
bdo bp kallikudi
bdo bp kallikudi
Madurai District (Package-4) Repairs to Pt. Union Primary School Building (Mangalore tiled Roof) in Servaikaranpatti village at Chittur Panchayat.in kallikudi block
2025_RDTN_582863_1
4/Kalli/ SIUS /2025-26
Open Tender
Civil Works - Buildings
Works
120 days
Kallikudi
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹4,200
29 Jul 2025
18 Jul 2025
25 Jul 2025
18 Jul 2025
25 Jul 2025
18 Jul 2025
Amount
Madurai District Repairs to Pt. Union Primary School Building (Mangalore tiled Roof) in Servaikaranpatti village @ Chittur Pt.. in Kallikudi Panchayat Union.
Dismantling of damaged wall Plaster and removed away from the site including all labour charges etc complete.
Removing of Pantile or mangalor tileld roof without roof timbers
Plastering 1:5 (one cement and five sand) to 12 mm thick including mixing mortar, working in all heights curing watering with good water etc., complete complying with standard specification.
Supply and fixing of PUF roof panels made up of minimum 0.5mm thick PPGI corrugated Sheet at the top and a plain sheet at the bottom with a layer of rigid CFC free polyurethane foam (PUF) of density 40kg + 2 Kg/cum as insulation in between .The polyurethane foam shall confirm to latest IS 12436. The minimum thickness of PU foam layer shall be 29mm for having 30mm (min) thick PUF panel. The PPGI Sheets shall be of minimum 240 MPA Steel Grade & shall have a Zinc coating of minimum 120 GSM as per IS 277/1992, 5-7 microns of epoxy primer on both sides of the sheet & polyester top coat of 18-20 microns on one side / outer side. The PPGI Sheets / PUF Panels shall have a protective guard film of minimum 20-25 microns to avoid scratches to finished panel during transportation. Providing ridges or hips ,encasing the ends of Panel with plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers etc complete excluding the cost of trusses, purlins and inclusive of cutting to size and shape wherever required. (W-0373)
Provision for Bala Painting Arrangement's Charges including cost and conveyance of all materials and labour charges
Distempering two coats over a coat of primer including preparation of surface by removing loose particles and other materials and applying lips wherever required to make the surface smooth including cost and conveyance of all materials and labour charges
Plastic Emulsion painting with two coats over a coat of primer including preparation of surface by removing loose particles and other materials including cost and conveyance of all materials and labour charges etc. complete.
Painting two coats over Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved best quality of synthetic enamel paint of approved colour over the existing priming coat etc complete complying with stand
Block board Painting including all cost and conveyance of all materials and all labour charges etc., complete.
CONSTRUCTION OF CUP BOARD WITH SHUTTER
Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.
Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.
Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).
Providing cuddapah slab 25 mm for shelfs etc., all complete
Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work. (SOR - 2022 -23 Page No-43 SI No-124)
CONSTRUCTION OF CHAPPAL RACK OUTSIDE THE CLASS
Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.
Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.
Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).
Providing cuddapah slab for shelfs etc., all complete
CONSTRUCTION OF PEDASTAL FOR KEEPING THE DRINKING WATER TANK
Earth work Excavation for Foundation in all soils and Sub Soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.
CC 1:4:8 Mix using 40mm metal including all charges etc complete
Brick work in CM 1:5 mix using country bricks ground moulded of size 22 x 11 x 7cm for the following including curing etc., complete complying with standard specifications.
Plastering with CM 1:5, 12mm thick.in all floors including curing etc., complete complying with standard specifications and as directed by the departmental officers.
Plastic Emulsion painting with two coats over a coat of primer including preparation of surface by removing loose particles and other materials including cost and conveyance of all materials and labour charges etc. complete.
Provision for 500 ltr Water Tank (M-0540)
Provision for Name Board and Photo charges
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
G KANNAN (BID ID -1411996)
M MARIAPPAN (BID ID -1410610)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .