WORK SERVICES FOR ENHANCEMENT OF SPORTS INFRASTRUCTURE AT AF STN SALUA UNDER GE (AF) KALAIKUNDA

Amount

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. or for cable laying or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose/ hard/ dense soil complete all as specified and as directed.

Removing excavated material (soils) not exceeding 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Excavation in post holes (or similar holes) in soft/loose soil each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface all as specified & as directed.

Surface excavation in hard/dense soil not exceeding 30cm deep and averaging 15cm deep and getting out complete including removal to distance exceeding 250m but not exceeding 1500m all as specified and directed.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Demolition of cement concrete of any description and in any position and removing unserviceable material exc 1500 mtr out side of MOD land complete all as directed as specified.

Materials and Labour for, broken stone or boulder hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface , complete all as specified and directed.

M & L for cement concrete M10 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate 75 mm thick in sub base /hardstanding /floor/path, pavings/plinth protechi , etc complete. all as specified and as directed.

M & L for cement concrete M10 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate 100 mm thick in sub base /hardstanding /floor/path, pavings , etc complete. all as specified and as directed.

M & L for cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate 75 mm thick in base /hardstanding /floor/path, paving , etc. finished even & smooth using extra cement and finally spike rolling to surface or making impression of expanded metal, whilst the concrete is still green complete all as specified and as directed.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M35 grade conforming to IS 15658-2006 made by block making machine with strong vibratory compaction, of approved size, design & shape, cast in rubber mould, glossy finish of approved colour, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

M & L for cement concrete in foundation, filling and mass concrete in M10(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed.

M & L for cement concrete in foundation, filling and mass concrete in M15(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate complete i including necessary from work complete all as specified and directed.

Materials and Labour for plain cement concrete (1:2:4) type B0 using 12.5 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles throating, as directed including necessary from work complete all as specified and directed.

Materials and Labour for rendering 5mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface finished even and smooth without using extra cement in walls/spetic tank/manholes/soakage pits etc, complete all as specified and directed. Note: - (Water proofing compound will be deemed to included in quoated rates)

Supply and fixing in position Basketball equipment as per latest international standards ITF approved consisting of the following :- (i) Backboard support structure or poles of suitable steel sections/pipes as per approved design embedded in concrete foundation below ground with suitable bolts and 12mm MS base plates. The height of the support structure shall be such that the height from ground level (playing floor) to top of basket ring shall be 3.05 M and shall have a projection of 3.25 M . The steel sections shall be suitably spray painted in approved tint. (ii) Backboard shall be of 30mm thick transparent acrylic board with reinforced frames of size 1800mm horizontally and 1050mm vertically. (iii) Basket/ Dunking ring shall be made of solid steel bars of 20 mm dia with an internal dia of 450mm and shall be fixed to the backboard support structures in such a way that any force applied to the ring cannot be transferred to the backboard. The ring shall be suitably spray painted. (iv) Nylon net made of 7mm nylon rope to the standard size and design. NOTES :- (Make : Stag, Product code - BBSE 31 or equivalent make Hercules / Bajaj / Vinex BAXTER INTERNATIONAL / COSTA SPORTS SYSTEM PVT LTD / REBOUND ACE INDIA PVT LTD / SUNDEK SPORTS SYSTEM) Note : Contractor shall get the make and design of the Pole and accessories approved from the Engineer-in-Charge The work shall be got carried out by authorised workmen/ applicator of the manufacturer)

Supply and installation of ITF Certified 9 Layers Synthetic Acrylic System of American/European/Australian origin only for Basket ball court flooring complete of following specifications:- 1 x Acrylic Resurfacer (Minimum consumption 0.3 Kg per Sqm) - 3 Granular Cushion layer (Minimum consumption 0.72 Kg Par Sqm for each Layer) 3 Latex Smoothing Cushion layer ( Minimum Consumption - 0.45 Kg per Sqm for Each Layer ) 2 textured topcoat. ( Minimum consumption - 0.3 Kg Per Sqm For Each Layer) 9 Layer US OPEN colours topcoat – Blue Inside/Green Outside. 1. The Playing Surface should be currently an official surface for an ATP Grand Slam/ ATP Masters 1000 Series ( At the time of the bidding of the tender). Documentary proof to be submitted at the time of technical bid submission 2. The Material Should be Premixed from the Manufacturer's factory (Place of Origin) 3. Mixing of Silica Sand on site for Cushion and Colour Coats will not be permitted. 4. All material should be directly imported for this project. Stock material will not be allowed. Contd...

5. Manufacturer to give declaration of consumption ration on letter head 6. The manufacturer to give proper Technical Data sheets verifying the above consumption Ration 7. Tool required for Application of the above system to be procured from Manufacture of Synthetic Acrylic only ( Like Squeezy , Line marking tool , etc ) 8. Line Marking Material to be of Same brand as Synthetic Acrylic Surface 9. Bidder to provide warranty of 5 years 10. The product Should be an ITF Pace Rated material. Manufacturers details and the product details should be listed on the ITF pace rating website. Bidder to provide a snapshot of the listing on the ITF website of the proposed product of a date not less than 15 days from the submission of the technical bid. 11. The ITF pace rating certificate for the Manufacturer and product proposed should be valid for more than 3 months from the date of submission of technical bid. Bidder to provide all proofs for the same. 12. The pace rating certificate from ITF of the product proposed to be submitted by the Bidder along with the technical Bid. 13. The manufacturer should be an ISO 9001-2015 certified company. 14. The Product Proposed should be of European / American / Australian region only. The manufacturer to give a declaration of the same. Contd...

15. The material to be order and manufactured specifically for the said project. Manufacturer’s declaration to be provided. Notes: (i)Slope of 1inch in every 10ft on short side of the court (ii)Minor Broom Finish Base with good surface to ensure no water logging. (iii)The rubber granules/crumb/powder should be pre-mixed by the manufacturer before importing. This ensures there is no human error / installing error while mixing of material. (iv)The manufacturer should have minimum 3 systems classified by International Basket ball/Tennis Federation. All certificates shall be uploaded and attached with the tender documents. (v)The validity of these certificates should be minimum 36 months to ensure latest product is being supplied. (vi)Item shall be executed directly through authorized OEM of manufacturer only and manufacturer has to give the guarantee for at least 05 years against peeling, cracking and sagging. 5% of the quoted amount against Item N0. above shall be retained out of contractors final bill as security deposit for the guarantee period of 05 years which shall be refunded to him after expiry of the guarantee period Satisfactorily. (vii) The OEM shall deploy the applicator manpower only, who have provident fund account. MAKE:- LAYKOLD / DECOTURF / PLEXIPAVE / GREENSET.

M&L for fixing of ITF approved international standard removable tennis net post size 80 mm x 80 mm with net of nylone complete all as specified and directed. Make : Ebaco India Ltd Bengaluru / Hercules / Bajaj / Vinex.

M&L pp tiles for law tennis-UV stable Polypropylene. Double mesh with widened grid on the top miniumum thickness 15.8 mm and minimum tiles size -304 x 304 mm. Locking system-round type, Total 8 locking system on each tile and Point load 700ton/dm. Tile weight - 220g/pc, Shock absorption 28%, rebound - 99%. Wear resistance - 0.1g/1000 cycles. Friction-97, impact resistance - 5 K.J/Sqm complete all as per ITF certified manufacturere,s instruction specified and directed.

Material and Labour for applying two coats of cement-based paint, white or tinted to new plastered surfaces on walls including priming with alkali resistant priming paint and including preparation of surfaces complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

Supply and fixing swaged & welded MS steel tubular poles, overall length 9.00 metre long, complete specification as per 410-SP-31 of IS: 2713-1980 complete with cast iron base plate, final taper plug, pole cap, bolts/nuts, screws/washes, painting with two coats of black bituminous paint through out internally and externally upto planting depth and two coasts of black and yellow alternate strips 30 cm each upto 1.2 mtr from the ground level. The remaining external position shall be painted with two coat of aluminium paint and one coat of cement based paint on PCC copping of pole including numbering of pole with black syenthic paint/ Stricker complete all as specified and as directed by Engr-in-Charge. (Note:- Earth work, PCC work, shall be measured and paid separately.)

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated cable for working voltages of 1100 V, PVC sheathed, armoured, 2 core with reduced neutral conductors (2 core), nominal cross sectional area of main conductor 10 sqmm, stranded aluminium conductor, ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc. complete all as specified and as directed.

Supply and fix LED sport lighting Floodlight luminaire with a housing of non-corrosive high pressure ADC with corrosion resistant powder coating and Anti-dust exposed Lens to ensure protection. The luminaire should have CRI > 70, SDCM <5 and CCT of 5700K and shall be compliant with IP66 and IK08 classification. Luminaire shall be designed to emit at least 23500 nominal lumens with maximum system wattage of 195W at a system efficacy of atleast 120 lumen/watt. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 35 deg C. The luminaire should have asymmetrical wide beam suiting sport applications with exposed PC optic lens. The luminaire should have fins on the back to ensure good heat dissipation and to prevent dirt from settling on the luminaire along with aiming angle scale. The electronic driver should be fully integrated and shall have a power factor >0.95 and THD <10% with a minimum inbuilt surge protection of 4kV/kA and suitable for an operation voltage range of 140-270V AC.The driver should be BIS approved, fully potted and encapsulated with 440V Stress Voltage protection for 8 Hrs. High Cut off : 325V(+/- 15V) and Auto Restart function should also be available within the fixture. The luminaire should comply with all the required IEC and IS standards and Marine Salt Protection (1000-hr test in lab). Make :- Philips BVP483LED235 CW AWB PSU GR/Havells, JETAVALOURFL 200W LED757MODWBLTG/OSRAM LUXPOWER FLOOD LIGHT 190W CWFS1 IN. Note:- The contractor shall purchase this item direct from authorized dealer and produce original purchase voucher and test certificate to the Engineer-in-Charge and also give minimum Five years warranty from manufacturer of the product.

M&L for FRLS wiring in existing locatation for circuit alongwith earth wire 2 x 2.5 sqmm + 1 x 1.5 Sqmm copper cable PVC insulated multistranded from junction box to fitting connecting box etc. (Two run of 2.5 Sqmm wire+01 Run of 1.5 Sqmm wire considered as one unit) all as specified and as directed.

Supply and fix pole mounted LT junction box, Water proof and fire proof, sheet moulding compound (SMC) box of inside size 250 mm x 200 mm x100 mm deep complete with 4 nos terminal end aluminium strip of 20 x 4 mm size fixing cable end terminal and 3 nos MS bolts and nut of size 8 mm dia x 30 mm long and MCB mounting rail with 6 Amp MCB SP duly welded with box fixed on plle with MS clamp 25 mm x 3 mm MS strip duly painted and testing complete all as specified and directed. Make : Sintex / L&T / Universal.

M & L for bracket made out of GI pipe 40 mm dia medium grade, 1.5 metre long bent to shape with MS flat iron clamps made out of 40 mm X 6 mm thick mild steel nuts, bolts including taking down existing GI bracket complete all as directed by Engineer-in-charge

SUMAN CONSTRUCTION

Palak Infracon

NATIONAL CONSTRUCTION CO