Karnataka

Active

Works

Buildings

Construction of Raita Bhavana to Shri Basaveshwar Vividodesha Prathamika Grameena Krushi Sahakara Sangha in Kallol village & to Shri Basaveshwar Vividodesha Prathamika Grameena Krushi Sahakara Sangha in Ulagaddiwadi (Examba) village reaches of Chikodi Sadalaga Constituency, Belagavi district

Karnataka Neeravari Nigam Limited

KNNL Division GRBCC Div No 4 Chikkodi | Karnataka

Amount: ₹33.7 LCloses: 16 Sept 20266d left

Timeline

Published4 Sept 2026
Closes16 Sept 2026
Bid Opening17 Sept 2026

Tender Value

₹33.7 L

EMD Value

₹67,500

Closing Date

16 Sept 2026, 4:00 pm6d left

Tender Inviting Authority

Office Inviting Bids

Karnataka Neeravari Nigam Limited

Contact Person

Makrand B Pednekar Executive Engineer

Office Number

Work Description

Construction of Raita Bhavana to Shri Basaveshwar Vividodesha Prathamika Grameena Krushi Sahakara Sangha in Kallol village & to Shri Basaveshwar Vividodesha Prathamika Grameena Krushi Sahakara Sangha in Ulagaddiwadi (Examba) village reaches of Chikodi Sadalaga Constituency, Belagavi district

Tender Information

Tender ID

KNNL/2026-27/BD/WORK_INDENT4680

Reference Number

KNNL/2026-27/BD/WORK_INDENT4680

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

KNNL Division GRBCC Div No 4 Chikkodi

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredCopy of the valid Karnataka PWD Class III & above Registration Certificate

RequiredCopy of Valid Employees Provident Fund Registration Certificate and paid challen for the previous month to the month in which tender is called

RequiredValid GST Registration Certificate and the specimen signature of Authorized person should be enclosed.

RequiredIncome Tax PAN card and Income Tax returns filed for the Financial year 2025-26 / Assessment year 2026-27

RequiredTo qualify for award of this contract each bidder in his or her name in the last 5 years should have satisfactorily completed at least 90percent of the contract value of on going works as prime contractor at least one building work of the value not less than i.e. Rs 20.00 lakhs during the last five years i.e. from 2021-22 to 2025-26. Certificates should be obtained from the Officer not below the rank of Executive Engineer and counter signed

RequiredTo qualify for the award of the contract the bidder should have an annual financial turnover of Rs 40.00 lakhs in at least Two financial years during the last 5 years turnover during 2021-22 to 2025-26 only will be considered duly updating the financial turnover at 10 percent per year to bring it to the price level of financial year in which the tenders are invited. Audited profit and loss statement with year wise turnover statement

RequiredLiquid assets and/or availability of credit facilities of not less than Rs 12.00 lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc

RequiredThe contractor should attach their recent correct portal address, Phone No. mail address

RequiredTenderers who meet the above specified minimum qualifying criteria will only be qualified if their available tender capacity is more than the total tender value. The available tender capacity will calculated as under Assessed available tender capacity AxNx 2.5-B

Eligibility Criteria

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government / Government of India /Union Territory.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non accessibility of KPP portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

A copy of the valid Karnataka PWD Class III & above Registration Certificate.

Copy of Valid Employees Provident Fund Registration Certificate and paid challen for the previous month to the month in which tender is called

Valid GST Registration Certificate and the specimen signature of Authorized person should be enclosed.

Income Tax PAN card and Income Tax returns filed for the Financial year 2025-26 / Assessment year 2026-27.

To qualify for award of this contract each bidder in his or her name in the last 5 years (2021-22 to 2025-26) should have satisfactorily completed (at least 90% of the contract value of on going works) as prime contractor at least one similar nature of work (Building work) of the value not less than i.e. Rs 20.00 lakhs during the last five years i.e. from 2021-22 to 2025-26. (Certificates should be obtained from the Officer not below the rank of Executive Engineer and counter signed by Superintending Engineer shall be furnished). (The cost of completed work of the previous year shall be updated by giving weightage of 10 % per year to bring it to the price level of financial year in which the tenders are invited).

To qualify for the award of the contract the bidder should have an annual financial turnover of Rs 40.00 lakhs in at least Two financial years during the last 5 years (turnover during 2021-22 to 2025-26 only will be considered) duly updating the financial turnover at 10 % per year to bring it to the price level of financial year in which the tenders are invited. Audited profit and loss statement (with year wise turnover statement) certified by a practicing Chartered Accountant with mentioned compulsory UID number along with copy of Income Tax returns filed for the two years indicated above shall be furnished.( If UID Number not mentioned treated as incomplete and Rejected).

Liquid assets and/or availability of credit facilities of not less than Rs 12.00 lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc.

The contractor should attach their recent correct portal address, Phone No. mail address.

Tenderers who meet the above specified minimum qualifying criteria will only be qualified if their available tender capacity is more than the total tender value. The available tender capacity will calculated as under - Assessed available tender capacity -AxNx2.5-B. Where A-Maximum value of civil engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited .B-Value at 2026-27 price level, of existing commitments and on-going works to be completed during the next i.e. N years (period of completion of the works for which Tenders are invited).Note-The statements showing the value of existing commitments and ongoing works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge not below the rank of an Executive Engineer or equivalent.

Corrigendum / Addendum will be published in the KPP Portal website for all modifications / Corrections if any

The rates shall be excluding GST. GST will be paid to the tendered amount separately as per prevailing rates. The amount put to tender is excluding GST.

The intending contractors should note that, if any of the lands (either in part / parts or in whole) required for the work is not yet acquired by the Department, it shall be the responsibility of the contractor to take possession of such land and start the work by consent of the owners before commencement of work at no extra cost to the Department and no claims whatsoever relating to non availability of land would be entertained.

The bidder should only submit / upload in KPP portal platform genuine certificates / documents , etc., that are as obtained from competent / concerned authorities against each required eligible criteria. Any of the submitted / uploaded certificates / documents etc., found to be fake after verification from issuing authority, then his / her EMD will be forfeited, besides proposed for making such bidders for blacklisting.

Tender will be opened in the office of the Executive Engineer Karnataka Neeravari Nigam KNNL GRBCC Division No.4 Chikodi, Belagavi District in presence of the bidders who wish to participate

The Bidder / Firm / Company is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-procurement portal due to Internet connectivity issues and technical glitches.

If any of the dates mentioned above happens to be a General Holiday, the next working day will holds good.

Conditional tenders are liable to be rejected. The officer competent to accept the tenders shall have the right to reject any or all the tenders without assigning any reason whatsoever

The intending bidders are advised to visit the site of work before submitting their tenders

As per the Government order No. LT/300/LET/2006 Bangalore Dt:-18-01-2007 a sum amounting to 1% of the bill amount of the contractor will be deducted towards cess and will be credited to the Karnataka building and other Constructions labour welfare fund.

Any bidder who is otherwise technically qualified withdraws from the bidding process at any stage before a final decision is taken on the tender, the EMD of such bidder shall be forfeited, the name of such bidder shall be removed from the category list of contractors at least for a minimum period of one year in DEPARTMENT/KPWD, besides making such bidders liable for blacklisting

The detailed tender notification can be had from the website https://kppp.karnataka.gov.in. And linking to e-tender or in the office of the undersigned.

The payment of bills for these works will be made as and when letter of credit received under the same Head of Account from Govt. of Karnataka

Typo-graphical errors if any will not be the ground for any claims by the contractor

If many bidders quoted lowest same price to the work and the award of work will be done by toss/ lottery system or by obtaining no objection certificate in this regard by other contractors who have quoted the same price

The work shall be tackled and completed within prescribed tender period

The bidder should adhere all terms and conditions as mentioned in the tender notification and bid documents

The Royalty charges will be recovered as per the govt. orders issued from time to time.

No interest will be paid by Karnataka Neeravari Nigam Limited on the Earnest Money deposited

The contractor is responsible for any damages due to natural calamity the government or Nigam will not give any compensation for until the completion of maintenance period

The currency period of the tender shall be 180 days from the date of opening the tender/tenders. If delay in deciding the tender is inevitable, the consent of the tenderer agreeing to keep open his offer for a minimum further period should be obtained in advance. The minimum further period for which the tenderer is required to keep his offer open should invariably be specified before his consent is obtained

During technical evaluation, if the employer finds that any certificates / information furnished is false, such bidders will be disqualified and barred from participation in the bid

If any bidder fails to satisfy the conditions mentioned above, such bids will be rejected and their financial bids will not be opened

The Bidder shall be responsible for successful performance of the contract

The Bidder to participate in the tender under single bid basis only. Any violation will attract disqualification of the bid

Further information can be had from the undersigned during office hours on telephone No: 08338 272485.

If the percentage quoted by the contractor for the work is below ninety percent of the updated recast estimated amount put to tender, then the contractor shall furnish an additional performance security in the form of Bank Guarantee for an amount equivalent to the difference between the cost as per quoted percentage and 90% of the updated cost put to tender. In case of contractor quoting above 125% of updated cost put to tender, then the over and above 125% of the updated cost put to tender will be withheld during the progress of work. The additional performance will be released proportionately to the bill amount till the contractor achieves progress of the entire cost of the work as per agreement. The withheld amount in the later case will be released only after entire work contracted is fully completed and so certified by the Executive Engineer. (If BG submitted while issuing fresh BG or extending any existing BG, claim period of a minimum one year from the date of expiry of validity period of BG is to be specified invariably)

The intending bidders are advised to visit the site of work, make themselves familiar with local situation about the availability of construction materials, work men, land required for construction activities, etc and shall upload along with bid with details of references for visit of different parts of the scheme in the form of photographs of site

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit in any of the forms given below for an amount equivalent to 5 percent of contract price & Additional Security for unbalanced tenders in accordance with clausse 25.5 of ITT and clause 44 of the conditions of contract for all works.

The tender processing charges paid by the bidder/firm/company are not refundable even if the tender is cancelled

The bidder/firm/company shall send the authorization letter for their representation duly attending their signature

The Employer shall give notice to the Contractor of any Defects before the end of the Defects Liability Period, which begins at Completion and is defined in the Contract Data. The Defects Liability Period shall be extended for as long as Defects remain to be corrected

Maintenance period or the Defect liability period for this work is 12 months from the date of completion of work

If the Employer instructs the Contractor to carry out a test not specified in the Specification to check whether any work has a Defect and the test shows that it does, the Contractor shall pay for the test and any samples. If there is no Defect the test shall be a Compensation Event

The materials used for electrical works shall confirm to relevant ISI specification

The Bidder shall not be under Corporate Debt Restructuring (CDR) / Strategic Debt Restructuring (SDR) or Bureau of Industrial and Financial Reconstruction (BIFR) in the last 5 Years prior to bid submission date

In case death of a contractor after execution of the agreement/ commencement of the work , his legal heir if any eligible registered contractor & willing can execute to complete the work at the accepted tender rates irrespective of the cost of the work.

The necessary certificates / documents in support of eligibility criteria to be fulfilled as stipulated shall be scanned and attached to e- tender document. The scanned copy (preferably in PDF form) of the required pre-qualification documents should be uploaded to the tender and the self-attested copies of the document of all details uploaded to the e-portal & original documents should be produced, for physical verification when asked by the department. If failed, the tender will be treated as non-responsive bid and will be rejected.

Scanned signature of the Bidder/ Firm/ Company authorized representative shall be attached while uploading the bid document.

Incomplete tender documents will be rejected.

All materials like steel, cement etc., required for the successful completion of the above work should be procured by the contractor only. No supply of any materials shall be made by KNNL.

The Bidder/ Firm/ Company should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work & also Land acquisition Problems if any.

Further information can be had from the Office of the Executive Engineer, KNNL GRBCC DIVISION NO-4, Chikkodi, Belagavi District during office hours.

First Aid facilities at each site shall be made available by the agency at his cost.

The intending bidders should note that, if any of the land either in part/parts or in whole required from the work is not yet acquired by the Nigama, it shall be the responsibility of the bidder to take possession of the such land and start the work by consent of the land owners before commencement of work at no extra cost to the nigama and no claim what so ever relating to non-availability of land would be entertained. Further, Nigam shall co-operate in getting the required for the work by initiating LAQ proposal as per Land Acquisition Act. Any delay in obtaining consent of the land owners shall not be considered for any additional compensation. In case of any obstruction from the land owner during the construction period or during the maintenance period, the contractor has to make his own arrangements to get the dispute settled and to bear the extra cost, if any, on that account.

Time allowed for completion of the work from the date of Agreement to the contractor is 06 (Six) months including monsoon period.

All Contractors must obtain Employee Compensation Act (ECA) policy for the workers engaged under the works. And this office will not be having any liabilities under the said Act provisions.

Other terms and conditions as per Bid document & Tender Notification Conditions.

Technical Criteria

Capabilities of Vendor

copy of the valid Karnataka PWD Class III & above Registration Certificate

PWD Registration Certificate (Class I/II/III/IV)

Copy of Valid Employees Provident Fund Registration Certificate

Valid EPF Certificate

paid challen for the previous month to the month in which tender is called

Valid EPF Certificate

Valid GST Registration Certificate and the specimen signature of Authorized person should be enclosed.

GST Registration

Income Tax PAN card

ITR Filed Copy (Mentioning PAN)

Income Tax returns filed for the Financial year 2025-26 Assessment year 2026-27.

ITR Filed Copy (Mentioning PAN)

Work Done Certificate

Liquid assets and/or availability of credit facilities of not less than Rs 12.00 lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc

Line of Credit

The contractor should attach their recent correct portal address, Phone No. mail address

Others -- The contractor should attach their recent correct portal address, Phone No. mail address

Others -- bid capacity

List of existing commitments and on-going works

Others -- List of existing commitments and on-going works

Financial Status

Tender To qualify for the award of the contract The bidder should have an annual financial turnover of Rs 40.00 lakhs in at least Two financial years during the last 5 years (turnover during 2021-22 to 2025-26 only will be considered) duly updating the financial turnover at 10 % per year to bring it to the price level of financial year in which the tenders are invited. Audited profit and loss statement (with year wise turnover statement) certified by a practicing Chartered Accountant with mentioned compulsory UID number along with copy of Income Tax returns filed for the two years indicated above shall be furnished.( If UID Number not mentioned treated as incomplete and Rejected).

Audited CA Certificate of Annual Turnover

Work Locations

Fee & Financial Details

Tender Fee Amount

₹850

EMD Fee Amount

₹67,500

Important Dates

Last Activity

4 Sept 2026

Published

4 Sept 2026

Bid Opening

17 Sept 2026

Download Ends

15 Sept 2026

BOQ Preview

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing rubble and sand filling in layers of 250 to 300 mm including cost of all materials,machinery, labour, watering, ramming and all other ancillary operations complete with all lead and lifts. ...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with sup...

•

Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) with all lead and lifts. - For SSM (Horizontal & Vertical)

•

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ra...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier underand around the column pits, walls, trenches, basement excavation, top...

•

Providing and laying in position cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufactur...

•

Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

•

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 g/l, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification....

•

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...

•

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

•

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m² of approved brand and manufacture i...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90mm .with all lead and lifts.

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete with all lead and lifts.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Door stopper 75mm with all lead and lifts.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in chargee SS Aldrop 16mm dia, 300mm with all lead and lifts.

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Handles 200mm with all lead and lifts.

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

•

Point wiring using Copper wire without switch Supplying and wiring adopting loop system in existing PVC Conduit/casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-...

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmlyflush mounted after due groove cutting in Brick/Stone/C.C wall 1-...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 Amps one way - Ground Floor

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 Amps 3 waysocket - Ground Floor

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator - Ground Floor

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293 16Amps one way switch - Ground Floor

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

•

Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...

•

Supplying of .....feet -PVC Batten with integrated LED tube .... Wwith high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V@ 5...

•

Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete upto 50 mm conduit CC floor - Ground Floor

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.25 x 6 mm GI strip - Ground Floor

•

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

•

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial

•

pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

•

Refilling the cable trenches with selected available earth from trenche execavation including watering ,consolidaion in Layers of 15 cms Thickeness including depositing of tehe surplus earth with ale...

•

Supplying and fixing of class B) GI pipe of wall thick ness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class. (68/7.12) - Ground Floo...

•

Supplying & Fixing of Fan

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

CIRCULARS.zip

Others - circulars • 24.77 MB

Ind 4680 Bid document.docx

Tender Document • 1.33 MB

2 building works notfn.docx

Instructions to Tenderers • 0.04 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .