SPECIAL REPAIR TO BLDG NO P 48 (COOK HOUSE) AND P 50 (DINNING HALL) OF AC AND OTHER SANCTIONED WORKS UNDER AGE BR I OF GE (WEST) FEROZEPUR CANTT

Amount

Dismantling of brick tiles in roof single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near outlet of RWP and OHT staging area complete all as specified.

All as per item no 01 herein before but double layer

Demolition of mud phuska in roofs,any thickness,including leeping plaster(whether full thickness removed or only a part thereof) complete all as specified.

M&L for brushing neat cement slurry with 3 kg of cement per square meter.

M&L 20 mm thick screed bed or bedding layer of mortar in CM(1:3) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane. Note: WPC shall be measured and paid separately

M&L 10mm thick screed bed or bedding layer of mortar in cm(1:4) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface.Note:WPC shall be measured and paid separately.

Supply only water proofing compound complete all as specified.

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified and directed.

M&L for applying a layer of blown grade of industrial bitumen 85/25 @ 1.20 Kilogram per square metre over a coat of bitumen primer @ 0.30 litre per square metre including preparation of roof surfaces complete all as specified and directed.

S&F 50 micron thick Polythene film,laid on roof including preparation of roof surfaces complete all as specified.

M&L for Mud phuska,80mm thick average,consolidated thickness,on flat roofs including 25mm thick mud plaster complete all as specified.

S&F 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar(1:3) mixed with 5% of crude oil by wt of cement on mud phuska complete all as specified and directed.

All as per item no.12 here-in-before but using old brick tiles retrieved from dismantling (item no.1 & 2 here-in-before) including cleaning and removal of mortar from tiles complete all as specified.

M&L For APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) Laid on primed surface by forced application including bitumen primer complete all as specified.→

M& L for App Membrane to be finished with two coat of solar reflactive bituminous aluminium Paint @ 0.1 kg per sqm

Demolition of cement concrete in sunken portion of any description and in any position not otherwise specifically provided.

M&L 15mm thick CM(1:3) with WPC on walls as well as on sunken floor portion finished even and smooth using extra cement. Note:- WPC shall be measured and paid separately.

M&L PCC (1:5:10) type E2 (using 40mm graded aggregate) in filling under sunken floor portion

M&L 30mm thick PCC(1:2:4) type B-1, using 20mm graded aggregate as in floor finished even and rough to receive top layer complete all as specified

M&L Plain cement concrete (1:2:4),type B-1 using 20mm graded stone aggregate min radius of 75mm tk as in roof and parapet wall junction,roof benching,kerbs,mud stop,coping,rounded or chamfered on edges,incl necessary sloping on roof including formwork complete all as specified.

M&L Plain cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in , kerbs, mud stop, rounded or chamfered on edges including form work complete all as specified and directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each complete all as specified.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified..

S&F factory made pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

All as per item above item no 24 here-in-before but size 75x50mm with single rebate.

S&F factory made 35mm thick second class hard wood, Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, sizes of members of shutters as specified in SSR part-I section 8 clause 8.24 supplied and fitted to chowkats complete all as specified.

S&F factory made 30 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.

M&L for cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats complete all as specified.

S&F Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.

S&F 250mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified.

S&F Mild steel pressed handle, oval type, 150 mm size, stove enameled black and fixed with steel screws, complete all as specified.

S&F 200mm long MS barrel tower bolts stone enamelled black with bright bolt complete all as specified.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

S&F in repair 300 mm,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified.

S&F 300mm mild steel helical door spring including roller and roller plate complete all as specified.

S&F Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.

S&F Factory made box type steel window side hung with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.

S&F Factory made box type steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified.

S&F in repair 3 mm thick ordinary quality sheet glass glazing with oil putty and glazing clips fixed complete to wooden/Steel window not exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips, complete all as specified.

S&F 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complete to wooden/Steel window not exc 0.5 sqm in each pane complete all as speciifed.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as speciifed.

S&F 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified as in repair.

S&F in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified.

S&F powder coated anodised aluminium door, window , ventilator frame including shutter etc fixed / sliding or pull and push type in shutter frames or shutters with two/three track sliding aluminium frame of Jindal /Hindalco (or) Equivalent make of approved size with power coating any colour minimum thickness 50 micron including necessary joining cleats, glazing clips, powder coated aluminium snap beading, screws etc including taking down complete all as specified as per manufacturers instructions. Note: Glass Pane and EPDM Rubber beading/gasket will be measured and paid seperatley.

S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters.

S&F Aluminium decogrill 10 mm thick with necessary chanels and clips DG 104

S&F solar control film 25 micron reflective sticked to glass panes as per manufacturers instruction complete all as specified

S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

S&F 150mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

Aluminium anodised, skeleton tower bolts with plate, staples and bolt of extruded section 375 mm long and fixed, all as specified and as directed by the Engr-in-charge.

S&F 150mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge.

S&F 125mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge.

S&F butt hinges 100mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type C-21 Specified and directed.

S&F butt hinges 100mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type B21 Specified and directed.

S&F butt hinges 125mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type B-21 all as Specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

S& F Continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws complete all as specified.

S&F hydraulically extruded aluminium body door closer regulated designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc complete all as speciified and directed.

S&F 4 lever aluminium mortice lock, vertical type size 100 mm complete all as specified.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in floor complete all as speciifed and directed.

S&F sheet glass,ordinary quantity,in squares exc 0.5 sqm each pane 5.5mm thick complete all as specified and directed.

S&F factory made Solid PVC door frame of size 50x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing as per specification.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing.

S&F PTMT tower bolts, 200 mm long and fixed with steel screws complete all as specified.

S&F PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin complete all as specified.

S&F PTMT handle 125mm long fixed with steel screws complete all as specified.

Dismantling of boarding, any description, fixed in any position with nails.

M&L for 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work complete all as specified and directed by Engineer in Charge

S& F 18-19mm thick pre-laminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in pelmet box or cup board shelf including 6 mm thick teak wood leaping on three sides and 20mm thich on hanging side & french polishing to edging,fixed in repair complete all as specified and directed.

S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.

Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified.

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

All as per item 73 above here-in-before but using old bricks retrieved from demolition under item 72 here in before including cleaning and removal of mortar from old bricks.

M & L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified.

Taking down of cement mortar plaster of any description and preparation of surfaces for receiving new plaster including racking out of joints complete all as specified.

M&L for external rendering 15mm thick in cement mortar (1:4) on any face of brick wall or concrete surfaces, finished fair and even complete all as specified.

M&L for internal rendering 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified.

Dismantling of floor hearth and wall tiling incl mortar beding and throw rubbish out the premises as directed by the Engr-in-Charge.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.06 sq m but not exceeding 0.11Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match the colour over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.

M&L for Non skid ceramic coloured (colour & shade as approved) tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry over and including 15mm thick screed in cement mortar (1:6) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with 10 mm thick in CM 1:4 complete all as specified and as directed.

S&F Vitrified ceramic tiles 10mm thick (Square/rectangular)polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 15 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.

M&L Vitrified ceramic tiles 10mm thick (Square/rectangular) polished area of each tiles exc 0.36Sqm and not exceeding 0.42Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Dark Shade)cement to matchover 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.

M&L for light shade Vitrified tile 10mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for glazed coloured designer ceramic tiles of size200X300x7mm or 300X450mmX7mm thick on vertical surfaces such as in skirting/dado etc set and jointed in cement slurry over 10mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-Charge.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar

M&L Machine cut kota stone slab flooring 20-25mm thick over 20 mm cement screed base CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing polishing and rounded or chamfered for nosing complete all as per specified.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick rendering in CM 1:4 and jointed with ditto as per above item no 89.

M&L Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over & including 15mm thick screed in cement mortar (1:4) with pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

Taking up or down 15 mm existing steel tubing and connections and Re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed.

All as per item No.94 here in before but 20mm dia.

Demolition of unreinforced cement concrete in ground floor and pavings n.exc. 15 cm thick (below or above GL) complete all as specified and directed by Engineer in Charge

M&L Cement concrete (1:3:6) type B-1 using 20mm graded stone aggregate as in plinth protection, 75mm thick, surfaces finished even and smooth without using extra cement complete all as specified.

M&L Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floor topping, 40mm thick, surfaces finished even and smooth without using extra cement complete all as specified.

S&F 15mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) fixed in repairs complete all as specified.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified.

S& F in repair Bib tap of cast copper alloy brass but fency type, Chromium plated 15mm bore, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S&F in repair 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass as in repair complete all as specified.

Removing & refixing of existing water tank of capacity 500Ltr etc setting aside (or lowering if required) for repair, cleaning etc and hoisting reconnecting & refixing in position.

S & F 500 Ltr Rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Parts & dismantling existing water storage tank, complete all as specified and directed by Engineer in Charge.

S&F in repair Gun-metal, globe or gate valves 15mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repair Gun-metal, globe or gate valves 20mm dia bore pipe, with iron wheel head, screwed both ends for iron pipe and fixed.

S&F in repair, 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (Minimum weight 210 gms) and fixed complete all as specified.

S&F in repair 15mm stop cock/angle cock cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated with fancy shank and cup.

S&F PVC Connection pipe, 450mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified.

S&F Urinal flat back vitreous china (White), of size 465 x 365 x 265 mm with grating, union for discharge pipe, spreader & 40mm dia PVC waste pipe upto floor trap complete all as specified.

S&F 15mm bore dia CP WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F CP Toilet Paper Holder rod pattern and all as specified and directed.

S&F Towel rail 600mm long of brass chromium plated fixed with & including CP brass screws & wooden/Plastic cleats (min. weight 170 gms)

S&F CP Soapdish Oval /squaretype as fixed in repairs and all as specified and directed.

S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 110 mm bore PVC (SWR) 'P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified.

S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified.

S&F Vitreous china white wash down water closet (pedestal pattern) including PVC sheet cover, Jet and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified.

S&F 1.00 mm thick stainless steel sink, plugs, washers, PVC waste pipe, union, CP coupling & fixed in RCC cooking platform, overall size of sink 915mmx460mm, bowl size 410mmx330mmx160mm as in repair complete all as specified.

S&F PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs. as fixed in repairs and all specified and directed.

S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.

S&F Health Faucet (ABS body) with 8mm dia 1.00m long flexible tube (PVC/Stainless steel coated) and wall hook all as specfied and directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards slabs/ blankets, any thickness, including cover fillets complete all as specified.

Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed by Engineer in Charge .

M & L fixing of Gypsum Board 6 to 7mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised snap grid frame 605X605 mm for false ceiling incl hanging arrangement complete all as specified and directed by Engineer in Charge.

Taking down and refixing of hollow pvc wall lining 5 mm thick inclusive of solvent cement complete all as specified and directed

Taking down and refixing of Gypsum Board 6 to 7 mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised/powder coated snap grid frame 605X605 mm for false ceiling incl hanging arrangement complete all as specified and directed by Engineer in Charge. complete all as specified and directed

Dismantling CI pipe alongwith fittings of 50/75/100mm dia,below or above ground level or laid in floors,jointed in cement mortar and taking out complete all as specified.

S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repairs complete all as specified.

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, fixed to wall including distance pieces and stack clamp with nuts & bolts complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe of pressure not less than 4 Kg/Sqcm in single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110mm bore, PVC (SWR) bends any radius complete all as specified.

S&F 110mm bore, PVC (SWR) branch piece, single (single T) equal or unequal with access door complete all as specified.

S&F PVC(SWR) vent cowl,for 110mm bore pipe complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore, PVC (SWR) bends any radius complete all as specified.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified.

Dismantling wrought iron/mild steel work in any position complete all as specified and directed

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and directed.

S&F rolled mild steel in Joist,channel,angle,or tee sections,fixed independently,without connecting plates,etc (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe-290(Gde E-165) complete all as specified and directed.

M&L Preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L Preparing new surfaces of steel of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

M & L for preparation of old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

M & L for Preparing old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

M&L for Preparation of new plastered surfaces wall and applying two coats of Oil bound distemper over a coat of primer complete all as specified.

M&L for Preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified.

M&L for Preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified.

M&L for Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified.

M&L for washing, rubbing down and stopping of distempered and painted surfaces and apply one coat of oil bound distemper all as specified.

M&L of for washing rubbing down and stopping of cement based painted surfaces and applying one coat of cement based paint on wall surfaces including proper curing all as specified and directed.

M & L for preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices complete all as specified and directed.

M & L for preparation of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling including cornices all as specified and directed.

Dismantling of steel work including doors ,gates but excluding framed truss complete all as specified and directed by Engineer in Charge

S&F Rolled section as in post /pillars where connected with angle cleat or other connecting plate etc of fe 410-W(grade E-250)quality 'B' including fabrication , erection and fixing complete all as specified and directed by engr-in- charge

M&L Roof truss (framed) trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (Beam tee, angle channel or flat sections) inclusing distance pieces,cleats etc Fe 410-W (Gde E-250) quality A complete all as specified and directed.

S&F rolled mild steel plates Fe 410 -W (Gde-E- 250) quality- A(plain or chequered) channels, square cut or notched (ordinary and counter sunk ) forming holes without any attachment complete all as specified.

S&F Mild steel screw bolts of 12 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 15cm and n exc 22.5cm long complete all as specified.

Dismantling plain or corrugated sheet on roof covering complete all as specified and directed.

S& F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Surface excavation in soft/loose soil n.exc 30 cm deep and averaging 15cm deep and getting out complete all as specified

M & L Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for fdn, manholes etc in soft/loose soil complete all as specified.

Excavation over areas, n exc 1.5 m deep and getting out soft or loose soil.

M&L for Plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling as mass concrete complete all as specified.

M&L PCC 1:4:8 type D-2 (40mm graded aggregate) in foundation, sub base, filling and mass concrete.

M & L Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm each in loose/soft soil complete all as specified.

M & L removing excavated material n.exc 50m and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified.

M&L 40 mm thick PCC, type B-0, 1:2:4 (12.5 mm graded stone aggregate) as in DPC including necessary complete all as directed.

M&L for Hard core of broken bricks of guage n.exc. 63mm, deposited, spread and levelled in layeres n.exc. 15 cm thick, watered and rammed to a true surface, as in below sub base, plinth protection and ramp, complete all as directed by Engr-in- Charge.

M&L for 75mm thick PCC 1:3:3, type C2 (20mm graded stone aggregate) as in plinth protection including finished surface even and smooth without using extra cement complete all as directed.

S&F frame work such as grills, gates, barred steel door etc with ends of bars shouldered and or welded or forged into spikes etc and similar works conforming to Fe-290 or Gde E-165

S&F Framed work Fe 410-W (Gde E-50) quality 'A' Fe as in doors or gates of angle or other section with gusset plates rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for handing or sliding with and including either hooks and hinges or steel handing door fittings (esclusive of steel sheeting or other covering, running rails and guides) and hanging: also fastening and fixing complete all as specified and directed.

M&L for flush pointing to brick wall in cement mortar 1:3 complete all as specified and directed.

M&L for laid flat and bedded and jointed in cement mortar 1:6 and pointed in CM 1:3 in floors old size bricks complete all as specified and directed.

S&F 1.25mm thick plain black mild steel sheeting in stepped flashings but welded or soldered joints are provided complete all as specified.

M &L for removing loose and broken concrete by chiseling/picking etc upto a depth of 20-40 mm from floor/roof slab and similar structural members cutting edges cleaning the dismantled portion with wire brush etc to remove dust, dirt and other foreign particles etc and washing with clean water with pressure and removal of debrises to a distance n exc 50m complete all as specified and directed by Engineer in Charge. Note: Including necessary scaffolding etc

M&L for applying one coat of anti corrosive primer as manufacturers instruction to exposed old and new reinforcement to the full circumferences and length of bars to form unbroken 40 micron thick film in the area prepared vide above item no. complete all as specified and directed by Engineer in Charge. Make : Forsoc(Nitozine Primer), Sika or equivalent

M&L for applying one coat epoxybonding agent as manufacturers instruction to old concrete surface in the area prepared vide above item no.06 complete all as specified and directed by Engineer in Charge in surfaces of columns, beams, and similar structural members including use of waste of water tight form work to facilitate pouring of microfibre all as specified and directed complete all as specified by Engineer-in-Charge

M&L for application of 20-40 mm thick high build polymer modified to ceiling with cement mortar Plaster (1:3) with SBR @ 4 ltr per bag of cement applied as per manufacturer's instrutions.as in complete all as specified and directed by Engineer in Charge.

S&F 20 mm Mild steel curtain rod PVC powder coated curtain rod with fancy type brackets including with all fittings as fixed in repair and all as specified and directed by engineer in charge

S& F PVC end cups fancy type for curtain rod as in repaire complete all as specified

Taking down carefully existing unserviceable copper/aluminium point wiring (light, fan, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators, FTL fittings etc. removing materials for taking credit and making good disturbed surface of wall, floors, etc complete all as directed by Engr-in-Charge.

Taking down carefully unserviceable main switches and distribution boards with fuses/ MCB's (single phase or three phase) of any capacity all as specified and directed.

Taking down carefully old unserviceable sub main wiring including meters and making good disturbed surfaces and matching with existing complete all as directed and specified

M &L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including new rigid non-metallic PVC conealed conduit, with all accessories as required such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and light fittings etc) and existing MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly complete all as specified and directed for the followings :- (a) One light/fan/Bell Point controlled by one single pole one way switch.

(b) One 5 Amps socket outlet same board controlled by one single pole 5 Amps switch

(c) One 5 Amps socket outlet independent board controlled by one single poles 5 Amps switch

All as per Item No 186 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

Supply & Fixing Switch piano flush type single pole one way 5/6 Amp complete all as directed.

Supply & Fixing Switch piano flush type 15 amps, single pole one way complete all as specified directed.

Supply & Fixing Socket outlet 2 in one , 5/6 Amps flush type complete all as specified directed.

Supply & Fixing Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type complete all as specified directed.

Supply & Fixing step type regulator Piano switch type ( 5 step) for ceiling fan 1200/1400 mm size 230 volts, 6 Amps.

S & F Modular Switch one way 6 A, 1 module complete all as per specified and directed. Make - Anchor/Havells/Legrand

S & F Modular Switch one way 16 A, 1 module complete all as per specified and directed. Make - Anchor/Havells/Legrand

S & F Modular Socket,6A - 2/3 pin combined 2 module complete all as per specified and directed. Make - Anchor/Havells/Legrand

S & F Modular Socket,6A16A - 2/3 pin combined 2 module complete all asper specified and directed. Make - Anchor/Havells/Legrand

S & F Modular white cover plate including GI box inner, 3 module complete all as per specified & directed. Make : Anchor/Havells/Legrand

S & F Modular white cover plate including GI box inner, 4 modulecomplete all as per specified & directed. Make : Anchor/Havells/Legrand

S & F Modular white cover plate including GI box inner, 6 module complete all as per specified &directed. Make : Anchor/Havells/Legrand

S & F Modular white cover plate including GI box inner, 8 module complete all as per specified &directed. Make : Anchor/Havells/Legrand

S & F Modular white cover plate including GI box inner, 12 module complete all as per specified &directed. Make : Anchor/Havells/Legrand

S & F Modular step type regulator,120 W - 2 module complete all as per specified and directed. Make - Anchor/Havells/Legrand

S & F in repair Switch socket Combination 16A, 6 pin, 3 module complete all as per specified and directed. Make - Anchor/Havells/Legrand

Supply & Fixing LED tube light fitting 18 Watts,4 feet long decorative ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply & Fixing LED tube light fitting 20 Watts,4 feet long decorative ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply and fixing of 7.5 W A60 LED Filament Lamp (White/Warm white) enegy saving including Decorative, wall mounting, antique brass finish fixture with opal glass diffuser suitable for 7.5 W A60 LED filament lamp E27 base.complete all as specified and directed. Cat Part No LHFOAJD1TZ1C060 of Havells or equivalent in any make.

Supply and fixing of LED Bright Lyts 6W Picture/Mirror/Spot/Bathroom/Display/Wall Flexible Neck Light (White) 2 ft adjustable type enegy saving curve type complete all as specified and direceted.

Supply and Fixing LED 2 feet X 2 feet,36 watts, 230 volts recessed mounting luminaires ( White/Warm White), complete with all accessories pre-wired and including connecting up with two core 1.5 sqmm copper conductor cable complete. Cat No.LCTLRN-36-FO-CDL of Crompton or equivalent of Bajaj/Havells/Philips

Supply and fixing LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. complete all as specified and directed. Cat Part No. TRP-400-35-57-SL-LM-NSR of Crompton or equivalent of Bajaj/Havells/Philips

Supply and fixing of LED Poarch light Decorative, surface mounting, dome shaped pendant in green & black finishes, enegy saving including 7.5 W LED Bulb complete all as specified and directed.

Supply & Fixing Lamp holder PVC/Polycarbonate,isolated with back plate suitable for batten fittings including 10W LED Bulb omplete all as specified and directed.

S & F Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals complete all as specified and directed.

S & F Modular Bell push 6A 1 module complete all as specified and directed.

S & F bell ding dong AC 230 volts single pole complete all as specified and directed

Supply and fix modular type AC motor starter 25 Amps 230 volts Two module complete all as specified and directed. Make : Havells Cat Part No AHFSMXW251 Or equivqlent.

Supply and fix modular type 10 A / 25 A shuttered socket, 230 volts Two module complete all as specified and directed. Make : Havells Cat Part No AHFKCXW253 Or equivqlent

Supply and fix wall mounted fan of size 400 mm sweep AC single phase 230V. Make of fan Crompton/Bajaj/Khaitan/Havells all as direted by Engineer-in-charge .

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm

Supply & Fixing sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series TPN DBs (Vertical type)fitted with ABS frame and 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified

S&F MCCB 4 pole, 415 volts, 100 Amps, 36 kA, 50 Hz complete all as specified and directed.

Supply & Fix in repair sheet metal enclouser SPN DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.

Supply & Fix in repair sheet metal enclouser SPN DB's 4 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.

S & F MCB single pole neutral(SPN) 240 volts, 40 Amps, 10 KA complete all as specified.

S & F MCB single pole (SP) 240 volts, 6 to 32 Amps, 10 KA complete all as specified.

S&F MCB SP, 40 Amps, 240 volts, "B" series, 10KA duly ISI marked, in the MCB DB, complete with connection testing and commissioning all as specified

M & L for sub main wiring with two single core PVC insulated FRLS cable with Copper conductor unsheathed cable of size 2 x 6 sqmm drawn through in and including PVC Concealed with 1 x 6 sqmm PVC insulated copper conductor single core for continuous earthing complete including PVC conduit 25 mm dia ( Note : Two run of single core PVC insulated cable with Copper conductor unsheathed cable of size 6.0 Sqmm and one run of 6.0 Sqmm PVC insulated copper conductor single core,one run of PVC conduit shall be measured as single run)

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to spoxsed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)

Supply, laying , jointing and testing of cable XLPE insulated, screened, PVC bedded ,galvanized steel strip or wire armoured heavy duty electric cable with multistranded aluminium conductor, 1100 volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 70 Sqmm 3.5 core confirming to IS : 7098-1985 laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified and directed.

S&F Galvanized steel tube 40 mm dia light grade For protection of cable complete all as specified and as directed

M& L for Sand cushioning to under ground cable in trenches/existing cable trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable complete all as directed.

Supply and lay bricks of old size sub class 'B' type for protection of U/G cable in trenches all as specified and directed.

Supply Installation commissioning & testing of water heater storage type electric capacity 25 ltsr, BEE 5 Star rated complete with all accessoriessuch as safety valve, thermostate, NRV, connection piece etc. Electric Storage water Heater Monza DX Cat Part No GHWAMGTWH025 of Havells or equivalent in any other make.

S&F Sheet metal enclosure with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps complete all as directed.

Supply, laying , jointing and testing of cable XLPE insulated, screened, PVC bedded ,galvanized steel strip or wire armoured heavy duty electric cable with multistranded aluminium conductor, 1100 volts grade, laid in trenches or duct or passing through pipe or fixed to poles walls of size 25 Sqmm 4 core confirming to IS : 7098-1985 laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified and directed.

Supply & Fix in repair sub main wiring of 4 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 mm dia all as specified and directed. Note:-Two run of single core 4 sqmm cable and one run single core 4.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).