15th CF Million Plus Cities Challenge Fund for SWM Parking Shed

Amount

Earth work exception for foundation in all solids and sub-solids to full depth as may be directed except in hard rock requiring blasting but inclusive shoring, structing and baling out water wherever necessary and filling the sides of foundation with excavated earth in layer of not more than 15cm thick well rammed and consolidated and depositing the surplus earth in all places shown by the department officers with initial lead and lifts etc. including leaving the sites complete complying with standard specifications etc complete.

Plain cement cement 1:4:8 Mix using 40 mm ISS Gauge HBG Metal including cost and conveyance of all materials to the work site including all labour charges for mixing,laying,ramming,consolidation and curing etc., complete as per standard specifications.

Random rubble masonry in cement mortar 1:5 for foundation and basement using new stones including necessary provision for bond stones with simultaneous flush pointing with the same mortar above ground level complying with standard specifications.

Supplying and erecting in the position of centering for sides and soffits including necessary supports and strutting upto 3.00 m high for plain surfaces with all cross bracings using mild steel sheet of 90 mm x 60 cm and or suitable size stiffened with welded-mild steel angle of size 2mmx25mmx3 mm for boarding laid over silver oax (country wood) joists of size 10 x cm x 6.5 cm spaced at about 90 cm centre to centre and supported by casurina props 10 mm to 13 cm dia spaced at about 75 cm center to center etc. complete complying with standard specifications and as directed the departmental officers.

Grade beam

For Column

Supplying, Fabricating and placing in position mild steel or deformed steel bars for all reinforced cement concrete items of work including cost of steel transporting straightening cutting, bending, cranking binding welding etc. Including cost of binding wire MS.chairs laps to fix the reinforcement in all positions, all labour and materials complete complying with standard specifications and drawings and as directed by the departmental Engineers.

Reinforced cement concrete 1:1.5:3 (One cement one point five sand and three hard broken stone) using 20mm guage broken hard granite stone jelly for all RCC, items of works excluding cost of reinforcement and fabricating charges, centering and shuttering but including vibrating charges and curing cost and conveyance of all materials to the site and all labour charges for mixing and providing fixture like fan clamps in the RCC floor or roof slabs wherever necessary as directed by the departmental officers etc., complete complying with standard specification.

Providing and laying Well Gravel to the specified thick including cost and conveyance of Well gravel from approved quarry and stocking the same at road side to Departmental guage for premeasurement as directed by the Departmental Officers including labour charges for spreading in layers not exceeding 75 mm thick (or) as specified by the departmental officers, levelling, sectioning etc., and all other charges for tools and plants employed for the work and all other incidental charges such as barricading and providing danger lights etc., complete as per standard specification. as per clause 301 & 305 of MORTH

Plain Cement Concrete 1:3:6 Mix (one part cement, three part sand and six part of aggrigate) using 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc. complete. Complying with std. specifications.

Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Weathering course concrete using best quality broken jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) over the RCC roof slab in the proportion of brick jelly to lime being 32:12.5 by volume and laid over in a single layer and consolidated to the required design and finished thickness, beating the concrete stantly wetted by sprinking lime jaggery water as per standard specification etc., complete as directed by the departmental officers.

Finishing the top of roof one course of machine pressed tiles of size 20cm x 20x2cm of approved quality laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound confirming to ISS by 2% weight of cement used and the joint pointed neatly to full depth of tiles with the same water proofing compound mixed with cement mortar, red oxide, etc., compete complying with standard specification.

Fly Ash Brick Work in Cement Mortor 1:5 Mix (one cement, five sand) using new best Fly Ash Brick of size 9 ” x 4 3/8 “x 2 3/4 ” from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Plastering with cement mortar 1:5 (one cement and five sand) 12mm thick in all floors including cost and conveyance of all other labour and material charges to site and curing etc., complete complying with standard specification and as directed.

Plastering with cement mortar 1:3 ( One cement and three sand)10 mm thick including cost and conveyance of all other labour and material charges to site and curing etc., complete complying with standard specification and as directed.

Floor finishing with fully vitified tilles using best quality of fully vitified tiles of size 60cm x 60cm x 6mm over the base plastering cement mortar 1:3 mix, 20mm thick pointing with using white cement 4kg/10sq.mt. inculing cost and conveyance of all materials and all labour charges. Etc. complete.

Supplying and fixing of M.S.grill of approved design for doors. Windows and ventilators using necessary mild steel flats for inner and outermembers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Supplying and fixing of M.S. " L "ANGLES of approved design fortruss using necessary mild steel flats for inner and outermembers which should be fixed to "truss" inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Supply, Delivery and fixing of best approved quality of corrugated Galvanised Sheet with 0.47 mm thick confirm to IS code with J Bolt nuts, Bitumen Washer including cost and conveyance of all materials and labour charges etc., complete as per standard specifications.

Painting the new walls two coats over one coat of priming with best Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers etc., complete complying with standard specifications.

Painting two coat for new iron works ushing best synthetic enamal paint of approved branded quality of paint over existing primer coat, etc., complete complying with standard specification (The paint should be got approved by the departmental officers before use on works).

Supply and fixing of 4 way sp of DB of 16 A / way with 32 A DP Switch with metal clad of 500 V with F and N (side Handle) on suitable T.W. board with Earth connection (S.D. No. 156)

Supply and run of 2 of 1.5 sq.mm (22/0.3) PVC Insulated SC unsheathed Cu. Conductor of 1100 V grade on 7/20 GI bearer wire for service connection mains (SD.64)

Supply and run of 2 x 1.5 Sq.mm (22/.3) PVC Insulated SC unsheathed CU. Conductor of 1100 Grade in 25mm Dia GI Pipe (Glass “B”) suitably Bent of both ends with necessary angle iron upright and end supports for Mains (SD 69).

Supply and fixing of single box type 4’40W flu. Fitting complete with tube copper choke and condenser with TW round blocks on wall orceiling with flu tube with PVC unsheathed copper leads from terminal to the fitting(SD. 88).

Supply and fixing of WT bulk head fitting with guard (Philips /Bajaj / Crompton / K. Lite) suitable for incandescent lamp with 60 W bulb (SD.84)

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with TW switch box and 5 A.F.T. switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) (SD. 24).

Supply and Fixing of 15mm thick Bitumen Pad including cost and conveyance of all materials to site and all labour charges etc., complete as per stand specification.

B SUNDAR (BID ID -1070663)