REPAIR and REPLACEMENT OF FLOOR TILES, KITHCEN PLATFORM, BATHROOM REPAIR AND MISC B and R WORKS IN HIGHRISE BUILDING, FOOD COURT AND NOFRA MARKET AREA UNDER CELL NO .02 AREA AT NOFRA UNDER GE (NW) NOFRA

M&L complete removal of existing treatment, of old plastered surfaces wall , and preperation of wall surface and applying two coats of oil emlusion distemper over a coat alkali resistant primer over 3mm thick wall care putty including necessary scaffolding any height and safety measures complete all as specified and as directed .

All as item No 1 above but on ceiling complete all as specified and directed.

Material & Labour for preparation old decorated surface of wall and applying two coat of oil emulsion distemper with smooth roller finish ,complete all as specified and directed .

All as item No 3 above but on ceiling complete complete all as specified and directed..

Material & Labour for preparation old decorated surface of wall and applying one coat of oil emelsion distemper with smooth roller finish ,complete all as specified and directed .

All as item No 5 above but on ceiling complete all as specified and directed.

M&L Preparation of old painted wood or wood based surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed .

M&L Preparation of old painted wood or wood based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed .

M&L Preparation of old painted on steel based surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed .

Taking down cement plaster on brick on stone walls etc including raking out joint, hacking for key, scrubbing down with water etc and removing debris out side M D land complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished the surface even and smooth with out using extra cement complete all as specified.

M&L for rendering 5mm thick in CM 1:3 on fair face of concrete surface in ceiling finished the surface even and smooth with out using extra cement complete all as specified and as directed

M & L for preparing new plastered surfaces of walls and applying two coats of oil emelsion distemper over a coat of alkali resistant primer including wall care putty not less than 2 mm thick complete all as specified and directed.

All as item No 13 above but on ceiling complete all as specified an directed.

Preparation of existing mosaic cement tiles flooring and polishing with machine/hand to surface and pointing of joints to match the colour complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement morter bedding ( but not backing), including removing debris out side MD land complete all as specified and directed.

M & L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) etc complete all as specified and directed.

M&L for glazed coloured ceramic tiles 300x200x7mm thick in vertical surface such as skirting and dados, set and jointed in neat cement paste and pointed in coloured cement to match inlcuding 10mm thick backing coat in CM 1:4 etc complete all as specified and directed

M & L for light shade Vitrified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

Ditto- as per item No. 19 here-in-before but as in skirting including 10 mm thick rendering in CM 1:4 as backing coat etc complete all as specified and directed.

Dismantling of stone slabs and tiles of any descriptionn or thickness iin floors, aprons etc complete all as specified and directed.

M&L for 18-20mm thick granite stone slab of machine cut mirror polished in flooring , bedded and jointed with grey cementpaste and pointed with white cement with admixture of pigment to match the shade of granite stone including 15mm thick screed bed in CM 1:4 complete all as specified.

M & L for 18-20mm thick granite stone slab machine cut mirror polished in skirting/dado and jointed with grey cement paste and pointed with white cement with admixture of pigment to match the shade of granite stone and including 10 mm thick backing coat in CM 1:3 complete all as specified.

Extra over granite stone slabs for edge polishing/ chamfering/ noising/ grooves/ bevelling etc complete all as specified and directed.

Dismantling wrought iron or mild steel works of any description work etc complete all as specified and directed.

S&F rolled mild steel sections Joist, channel, angle, or tee sections Fe 410 -W (Gde-E- 250) quality-A, fixed independently, without connecting plates, etc complete all as specified and as directed.

S & F for mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Gde-E-165 complete all as specified and as directed..

S & F in repair Mild steel, plain, black sheet 1.6mm thick in hearths; covering to door shutter, covering to door chowkats (frames), chullah hoods; water tanks, water troughs, ducts, urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and as directed.

S&F in repairs 300 mm long aluminium alloy, sliding door bolt ISI marked with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts ISI marked complete all as specified.

S & F 100mm x 40mm x 4mm thickness butt hinges, heavy duty, mild steel iron, minimum weight 390g used for gates, doors (weilding comatible) and other fabrication complete all as specified and as directed.

M&L Preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of redoxide primer complete all as specified and directed .

S & F Powder coated aluminium sections (minimum thickness of powder coating 50 micron) for shutters and frame of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required complete all as specified. Note :-(i) Glass pne shall be measured and paid seperately. (ii) The rate ratequated shall be inclusive of neoprene beading, glazing clips, screws etc as required but shall not be measured for arriving weight. (iii) The rate shall be inclusive of locking arrangement inclusing complete packing with silicon gel around contacting surface of aluminium work with matching existing areas. (iv) The size of aluminum section shall be as per HQ CE TD drawing No TD/2021/01 to 05 .

Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supply and Fix 5.5mm thick sheet glass ordinary quality and glazing with oil putty fixed with beads in each pane complete all as specified and as directed

S&F 3mm thick one side ground or obscured or frosted glass sheet ordinary quality and glazing with oil putty/ wooden beading n.exc 0.5Sqm in each pane complete all as specified and directed.

Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 Sqm each , complete all as specified and directed.

Resecuring or easing & adjusting without taking down shutters of any description exc 1 Sqm not exc 2 Sqm each , complete all as specified and directed.

S&F in repairs stainless steel butt hinges 100 mm size, medium weight with SS hinge pin, bright finished complete all as specified.

S&F in repairs aluminium anodized barrel tower bolts 100 mm of extruded section ISI marked complete all as specified and directed.

S&F in repairs aluminium anodized barrel tower bolts 150 mm of extruded section ISI marked complete all as specified and directed.

S&F in repairs 100 mm size aluminium alloy handles, cast type anodised, ISI marked complete all as specified .

S&F in repairs 150 mm size aluminium alloy handles, cast type anodised, ISI marked complete all as specified .

S&F 300 mm long aluminium alloy, sliding door bolt ISI marked with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts ISI marked complete all as specified.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring ISI marked all as specified

S&F aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples complete all as specified and as directed

S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

S & F in repairs Brass mortice night latch 4 levers, vertical type, 100 mm size with plates and two keys suitable for door shutter complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with screws complete all as specified and as directed

M&L for 12 mm thick commercial plywood , grade BWR,Type-BB ISI marked fixed with screws to timber frame work including 1st class HW leaping all around the shutter/ edges complete all as specified and directed.

M&L for 18 mm thick commercial plywood , grade BWR,Type-BB ISI marked fixed with screws to timber frame work including 1st class HW leaping all around the shutter/ edges complete all as specified and directed.

M&L 0.9mm thick decorative laminate type 1, of surface finish, colcur and pattern as approved, fixed with approved adhesive as per manufactures instructions all as specified and directed.

S&F stainless steel butt hinges 75 mm size, medium weight with SS hinge pin, bright finished complete all as specified.

Supply and Fix 40 mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished fixed in repairs complete all as specified and as directed

S&F in repairs magnetic catcher of approved make for door shutters in cupboard/Cabinate complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each,complete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hardwood (SAL)glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified ; supplied and fitted to chowkhats , complete all as specified and directed.

S&F 35mm thick second class hard wood (SAL), plain framed, panelled shutter (Two panel) of 9mm BWP comercial ply or 12mm veneered particle board with comercial veneering on both faces the size of rail land stile as per IS 1003 (Part-I) killn seasoned and chemically pressure treatedcomplete all as specified and directed.

Supply and Fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side. Panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement adhesive etc complete as specified and directed and sample shall be approved by GE.

Supply and Fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube fixing in existing opening including necessary hold fast and filling concrete all and as specified and directed .

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts ISI marked complete all as specified.

S&F stainless steel butt hinges 100 mm size, medium weight with SS hinge pin, bright finished complete all as specified.

S&F aluminium anodized barrel tower bolts 100 mm of extruded section ISI marked complete all as specified and directed.

S&F aluminium anodized barrel tower bolts 150 mm of extruded section ISI marked complete all as specified and directed.

S&F 100 mm size aluminium alloy handles, cast type anodised, ISI marked complete all as specified .

S&F 150 mm size aluminium alloy handles, cast type anodised, ISI marked complete all as specified .

Taking down chowkhat or frame exc 1.5 Sqm but not exc 4 Sqm each without taking off shutter of any discription complete all as specified and as directed.

M&L for 2nd class HW (SAL) Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S & F mild steel hold fasts 25 mm X 5mm , wall ties and similar small articles conforming to Fe 410-0 or Fe310-0 complete all as specified and directed.

M&L plain cement concrete 1:3:6 type C1, usinng 20mm graded cushed stone aggregate, for fixing hold fasts complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description exc 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F in repair 20mm dia aluminium decorative type powder coated curtain rod or similar articles complete all as specified and as directed.

S&F in repair aluminium decorative type powder coated brackets suitable for 20mm dia curtain rod or similar articles complete all as specified and as directed .

S&F in repair Telescopy channels,power coated with ball bearings,suitable for sliding SS kitchen bracket 60 cm long long standard width,fixed over 2nd class hard Wood rectangular fillet sectional area exc 3 & n exc 6 sqcm, clean swan secured with screws and the fillets fixed on cuddapah stone with screws ,all as specified and directed.

S&F in repairs vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing blts, flushing cistern and flush pipe) Connecting to P or S trap complete all as specified and directed.

S&F in repairs water closet squattus pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including 'P' or 'S' trap and providing of lime concrete bedding and making good to floor (excluding flushing cistern and flush pipe) complete all as specified and directed..

S&F in repair 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified.

S&F in repairs plastic water closet seat covers standered closed pattern with flat bottom and cover and MS chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs fancy type Pillar taps 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe, complete all as specified and directed.

S&F in repairs Toilet paper holder along with cover of stainless steel suitable for 120mm width and 100mm depth long paper fixed to walls , as per approved complete all as specified and directed.

S&F in repairs Stainless Steel Soap Dish Cat Part No.ACN-CHR-1131N of Jaquar or Techno commercial equivalent in as approved fixed with two Steel/ CP Screws complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting uinon to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

S&F in repairs PVC grating of size 100mm dia complete all as speified and directed

S & F PVC cabinet with openable shutter and mirror with size of 450mm x 350mm x 120mm with thickness of mirror not less than 2mm, fixed to wall in repairs complete al as directed.

S&F in repair decorative glass corner shelf round 10mm thick, 300mm size with stainless steel railing, fixed with D type stainless steel bracket on wall of approved design and pattern all as specified.

S&F in repairs tubular towel rail brass chromium plated 20mm dia D type 60cm long between flanges including a pair of brackets complete all as specified and directed.

S&F in repair 32mm bore PVC waste pipe suitable for WHB,kitchen shink and urinals complete all as specified and directed.

S&F in repair 40 mm bore PVC waste pipe suitable for WHB,kitchen shink and urinals complete all as specified and directed.

S&F in repair 32 mm bore PVC waste coupling suitable for WHB,kitchen shink and urinals complete all as specified and directed.

S&F in repair 40 mm bore PVC waste coupling suitable for WHB,kitchen shink and urinals complete all as specified and directed.

Taking up or down 20 mm bore GI l tubing including connections and removing from store of following , complete all as specified and directed

Taking up or down 15 mm bore GI l tubing including connections and removing from store of following , complete all as specified and directed

Supply and fix Steel water tubing 20 mm galvanised medium grade ,ISI marked of following size, with all fittings fixed complete to walls and ceiling or laid in floor/wall/ ceiling (including scaffolding) complete all as specified and directed.

Supply and fix Steel water tubing 15 mmgalvanised medium grade (ISI marked) of following size, with all fittings fixed complete to walls and ceiling or laid in floor/wall/ ceiling (including scaffolding) complete all as specified and directed.

M&L for cutting chases for concealed water tubing and making good in cement mortar 1:3 girth of cutting n.exc 10cm in brick walls complete all as specified and directed.

M&L for cutting holes into or through brick walls built in cement mortar and making good in cement concrete 1:2: 4 type B 1 20mm graded crushed stone aggregate as required, superficial area of the cutting n.exc 150 sqm complete complete as specified and directed.

Supply and fix in repair hot water extention pipe made out of copper chromium plated 450 mm long with brass adaptor and fixing in position complete all as specified and directed.

Supply and fix in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm with brass adapters, washers etc complete all as specified and directed.

S & F rotational moulded polyethylene double layer water tanks of 270 litre capacity, loft tank (vertical cylindrical with close top) as per IS 12701: 1996 of 250 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes, including taking down old unsv water tank all as specified and as directed

S & F rotational moulded polyethylene double layer water tanks of 150 litre capacity, loft tank (vertical cylindrical with close top) as per IS 12701: 1996 of 250 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes, including taking down old unsv water tank all as specified and as directed

S& F in repair PVC modular 20 mm thick as in proflie including 'C' channels, aluminium U clip all around the profile suitable for 300 ltr/150 ltr capacity loft tank ,complete all as specified and directed.

S& F in repairs 15 mm bore brass float valve, (ISI marked) high pressure with polythene float & fly nut complete, screwed for GI pipe of following sizes including necessary GI fittings complete all as specified.

S&F in repair gun metal globe or gate valve (ISI marked) of 20 mm bore with iron wheel head, screwed both ends for iron pipe & fixed complete all as specified and directed.

S&F in repair gun metal globe or gate valve (ISI marked) of 15 mm bore with iron wheel head, screwed both ends for iron pipe & fixed complete all as specified and directed.

S&Fin repairs 15 mm bore fancy type bib taps chromium plated cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule , complete all as specified and as directed

S&F in repairs 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe, complete all as specified and directed.

Supply and fixing in repairs Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed

Supply and fix in repairs fancy type chromium plated brass angular stop cock suitable for 15mm bore GI tubing, with necessary fittings complete all as specified and directed

Supply and fix in repair Stop valves 15mm bore dia of pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

Supply and fix repairs in fancy concealed type stop valve with long shank and adjustable wall flange including union suitable for 15mm bore GI/upvc pipe complete all as specified and directed

S & F health faucet with jet spray, 1.5 metre long, cast copper alloy, nickel chromium plated finish, 15 mm bore, 100 mm long with 1 m long PVC tube with wall hook chromium plated fitted to stopcock complete all as specified and as directed.

S&F in repairs 15mm fancy type chromium plated cast copper alloy Two way Bib taps, Cat Part No.CQT-CHR-23041 of Jaquar or in Parryware or Hindware or Techno commercial equivalant as approved , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Cleaning of loft tanks of 150 Ltrs capacities in existing position by removing out the residual water from the tank, removing dirt, cleaning the internal surfaces of the tank with high pressure controlled water jet pump by using different nozzles as per requirement. After sucking out entire moss and algae by wet vaccume pump, wash the tank with clean drinking water tank cleaning solution on all internal surfaces, then cleaning the bottom surface of the tank with vaccume pump to make it dry and providing sticker showing the date of cleaning completely all as specified & directed.

Cleaning of loft tanks of 270 Ltrs capacities in existing position by removing out the residual water from the tank, removing dirt, cleaning the internal surfaces of the tank with high pressure controlled water jet pump by using different nozzles as per requirement. After sucking out entire moss and algae by wet vaccume pump, wash the tank with clean drinking water tank cleaning solution on all internal surfaces, then cleaning the bottom surface of the tank with vaccume pump to make it dry and providing sticker showing the date of cleaning completely all as specified & directed.

Please Enable Macros to View BoQ information