Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.2 LAccepted-AOC A 1 BLOCK 2 HATHITHAN HATHITHAN VILLAGE TOWN JALALNAGAR CITY SHAHJAHANPUR SHAHJAHANPUR UTTAR PRADESH 242001 INDIA | SHAHJAHANPUR | UTTAR PRADESH | 242001 | L1 | Accepted-AOC being lowest | |
| 2 | L2₹8.9 L+₹64,518.75 (7.85%)Rejected-Finance | L2 | Rejected-Finance Being not lowest |
Tender Value
Refer Docs
EMD Value
₹20,000
Closing Date
29 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) FATEHGARH
AGE (I) FATEHGARH CANTT
PROVN OF CERTAIN MINOR WORKS UNDER AGE(I) FATEHGARH
2024_MES_636277_3
AGE(I)/FAT/ET-44 OF 2023-2024
Open Tender
Miscellaneous Works
Item Rate
180 days
AGE (I) FATEHGARH
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) FATEHGARH
₹20,000
Yes
24 Jun 2024
4 Apr 2024
6 May 2024
4 Apr 2024
29 Apr 2024
4 Apr 2024
Amount
S&F Joist, channel, angle, or tee sections, ISMB etc fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410-W (Gde E- 250) quality A complete all as specified and directed
S&F MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410-W (Gde E- 250) quality A ) complete all as specified and directed
M&L for two coat of synthetic enamel paint over a coat of red oxide including preparation of steel surfaces over 10 cm in width or girth not otherwise described complete all as specified and directed
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat?forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incliuding 15mm thick CM 1:4 complete all as specified and directed
Demolition of brickwork masonary built in lime or cement mortar including all quiens arches, pillars etc. But including concrete articles complete all as specified and directed
M&L for 12 mm thick Toughned glass as in wall panellig/Vertical surfaces including stainless steel cleats, silicon sealant for gap filling and all necessary items for fixing and similar work including cutting to shape, drilling holes required complete all as specified and directed .
M&L for Solar control film 25 micron reflective type sticked to glass panels as per instructions of manufacturers complete all as specified and directed
Taking down cement plaster on brick wall or stone wall etc. including raking out joints hacking for key, scrubbing down with water etc and disposed off unserviceable material of out side MD land complete all as specified and directed
M&L for 15mm thick cement plastering in cm 1:6 on brick or concrete surface fair finished the surface even and smooth without using extra cement all as specified
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n exc 1.5 sqm each complete all as specified and directed
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth including complete removal to exisitng treatment complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (including taking down of backing plaster to brick / concrete wall surface), complete all as specified and directed.
M & L Vitrified ceramic darkshade joint less tiles 10 mm thick (square/rectangular) area of each tile n. exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of cement (1:6) complete.
S&F Deco window venetian blinds fancy type for windows, cord mechanism to tilt and raise aluminium slats light filtering shades for room Iincluding 25mm dia decorative type curtain rod all fittings all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm not exceeding 4 square metre each, complete all as specified.
S&F Rolled sections as in framing for cladding, cooler stand, glazing, for frame and the like fixed with angle cleats and connecting plates or nut bolts with MS plate etc conforming to Fe 410-W (Gde- E- 250) quality- A etc complete all as specified and directed
S&F factory made 35 mm thick 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats etc complete all as specified and directed.
M & L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of wood primer complete all as specified and directed.
S&F Mild steel sliding door bolts 250mm, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified.
S&F Mild steel pressed handles 125mm size, oval type, stove enamelled black, complete all as specified.
S&F butt hinges, medium grade cold rolled mild steel 100 mm long complete all as specified and directed.
S&F MS work such as holdfast ,staple,clamps,etc and similar small article etc conforming to Fe-290-0 grade -e-165 complete all as specified and directed.
M&L of brick work with sub class 'B' burnt bricks straight or curved on plan exc. 6 m mean radius bult in CM 1:6 complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil etc complete all as specified and directed.
M&L for Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base, fdn filling and mass concrete etc all as specified and directed
M & L for RCC Nominal mix 1:2:4 (type B-1) using 20 mm stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete al as specified and directed
M & L for RCC Nominal mix 1:2:4 (type B-1) using 20 mm stone aggregate as in Columns, pillars, piers, posts and struts etc complete al as specified and directed
M & L for RCC Nominal mix 1:2:4 (type B-1) using 20 mm stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete al as specified and directed
M & L for RCC Nominal mix 1:2:4 (type B-1) using 20 mm stone aggregate as in RCC in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed.
M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed
M & L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)
Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.
M&L of mild steel TMT Bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9 mm dia securing with clips complete all as specified and directed .
-ditto- as above for 6mm to 8mm dia size complete all as specified and directed .
M&L of mild steel TMT Bars but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9 mm dia securing with clips complete all as specified and directed .
M & L for one coat synthetic enamelled painting over a coat of red oxide primer, including prepartion of new steel surfaces of any description, over 10cm in width or girth,not otherwise described etc complete all as specified and directed.
S & F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S & F for mild steel work as in Hand rails, half round or other steel section or including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming toFe-290 Gde E-165 etc complete all as specified and directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm etc complete all as specifed and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc.1.5 m above the starting point
M&L for cutting holes into or through brick walls area exc 150 sqcm but n.exc 400 sqm built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required including finishing the surface as per matching the existing surface etc complete all as specified and directed.
Taking down copper/aluminium point wiring of any description and any position (light, fan, socket or power point) complete, including fixture and fittings such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and as directed .
Taking down aluminium/copper sub main wiring and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and as directed .
M&L for point wiring of light/ fan / exhaust fan / bell point controlled by one switch with1100 volt grade PVC insulated and unsheathed, FRLS copper conductor multistranded cable in and including on existing PVC rigid conduit with complete accessories including provision of PVC insulated cable of 1.5 sqmm size unsheathed copper conductor as earth wire through on the same conduit to common earth and connected to earth dolly including modular boxes of required size ISI marked for the following point controlled by one swithch controlled by one way switch 5/6 Amps complete all as specified & directed. Note- (i) The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour.
…...ditto as above but for one 5 pin 6 Amp switch socket combination point on an independent board….ditto as above ….
…..ditto as above 5 pin 6 Amp socket point controlled by one switch on same board.….ditto as above ….
…..ditto as above but for one 16 Amp 6 Pin switch socket combination independent with 4.0 Sqmm FRLS unsheathed copper conductor single core multistranded complete all as specified.
S&F Modular switch 1 way 6A,1 Module complete all as specified and directed.
S&F Modular switch 1 way 16A, 1 Module complete all as specified and directed.
S&F Socket, 6 A - 2/3 pin combined 2 Module complete all as specified and directed.
S&F Socket 16 A - 2/3 pin combined 2 Module complete all as specified and directed.
S&F White cover plate with frame, 1 module complete all as specified and directed.
S&F White cover plate with frame, 4 module complete all as specified and directed.
S&F White cover plate with frame, 8 module complete all as specified and directed.
S & F Modular electronic Fan step regulator, 120W - 2 module complete all as specified and directed
S & F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.
Supply and fixing in replacement MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified.
S&F in replacement of MCB SPN 63 Amp 240 volt 'C' curve complete all as specifed and directed.
S&F MCB in replacement of MCB SP 6 to 32 Amp 240 Volt 'C' curve 10 KA complete all as specified and directed.
S&F LED Batten 4 Ft surface / wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption < 20W (4 FT 20 W), luminaire lumen >2000 lm, system efficiency of > 120 lumens / W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20, colour rendering index CRI>80, temp range 0 to 45 ºC, driver efficency >85%, power factor >0.9, THD <20% as per IEC 61000-3-2, colour temp - 6500K, surge protection 2.5 KV, 50000 burning hrs (min) as per L70 criteria, two stages isolated constant current operated driver with range 150-270V AC and safety extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification and connecting the same in electric source with and using PVC sheathed and insulated 3 core copper conductor cable of size 0.75 Sqmm and fixing arrangement for fixing the light fitting complete all as specified and directed.
Supply and fxing LED batten Tube light surface / wall mounted with specially designed powder coated aluminum hou sing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <10W (2 FT 10 W), luminaire lumen >1000 Im, system efficiency of >120 lumens /W, with LED binning as per ANSI Bin C78.377A, photo biological safety report as per IEC624718 & electrical insulation class I, Ingress protection IP 20. colour rendering index CRI>80, temp range 0 to 450C, driver efficency>85%, power factor>0.9,| THD <20% as per IEC 61000-3-2, colour temp -650OK, surge protection 2.5 KV, 50000 burning hrs (mnin) as per L70 criteria, two stages isolated constant current operated driver with range 150- 270V AC and seafty extra low voltage safe level <60V DC as per IEC standard with LM70 & LM80 certification completed all as specified and directed.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
M&L for Sub Main Wiring with two single core 6 Sqmm FRLS copper conductor PVC insulated and unsheathed cable including PVC conduit medium grade (appropriate size) concealed in wall for sub main connection including 6 Sqmm FRLS insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and as directed. ( Note :- Two runs of 6 sqmm FRLS and one run of 6 sqmm FRLS copper conductor shall be measured as one unit length.)
S&F of metal plug & socket DB with metal plug and MCBs dobule pole and neutral enclosere with a two pin earth plug and socket suitable for 20 Amp complete with one single pole MCB complete incl dismentaling all as specified and directed.
M/S S P CONSTRUCTION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .