752756A PROVN OF OPD COMPLEX AT MH DANAPUR CANTT

Amount

SCHEDULE "A"

SCHEDULE "A" PART-I (Building Work) Lump sum price worked out by the contractor for 'Building Work' as listed in Schedule 'A' Part-I against the lump sum price inserted by the MES.

Sch 'A' Part-II ( Internal Water supply) Lump sum price worked out by the contractor for Internal Water Supply as listed in Schedule 'A' Part-II against the lump sum price inserted by the MES.

Sch 'A' Part-III ( Internal Electrification) Lump sum price worked out by the contractor for 'Internal Electrification ' as listed in Schedule 'A' Part-III against the lump sum price inserted by the MES.

Sch 'A' Part-IV (External Water supply) Lump sum price worked out by the contractor for ' External Water Supply' as listed in Schedule 'A' Part-IV against the lump sum price inserted by the MES.

Sch 'A' Part-V (External Electric Supply) Lump sum price worked out by the contractor for'External Electrification ' as listed in Schedule 'A' Part-V against the lump sum price inserted by the MES.

Sch 'A' Part-VI (Road, Path and Culvert) Lump sum price worked out by the contractor for 'Road Path and Culvert ' as listed in Schedule 'A' Part-VI against the lump sum price inserted by the MES.

Sch 'A' Part-VII (Sewage Disposal) Lump sum price worked out by the contractor for 'Sewage Disposal ' as listed in Schedule 'A' Part-VII against the lump sum price inserted by the MES.

Sch 'A' Part-VIII (Area Drainage) Lump sum price worked out by the contractor for 'Area Drainage ' as listed in Schedule 'A' Part-VIII against the lump sum price inserted by the MES.

Sch 'A' Part-IX (Fire Fighting and Fire Detection System) Lump sum price worked out by the contractor for 'Fire Fighting and Fire Detection System ' as listed in Schedule 'A' Part-IX against the lump sum price inserted by the MES.

Sch 'A' Part-X (Lightening Protection) Lump sum price worked out by the contractor for 'Lightening Protection' as listed in Schedule 'A' Part-X against the lump sum price inserted by the MES.

Sch 'A' Part-XI (Site clearance, excavation & earth works) Lump sum price worked out by the contractor for 'Site clearance, excavation & earth works' as listed in Schedule 'A' Part-XI against the lump sum price inserted by the MES.

Note for Srl No 2 to 12 The percentage above / below the SSR -2020 (part-II) rates shall be derived from the amount quoted by the contractor against Srl No. 2 to 12 by comparing it with the amount inserted / pre- priced by the department and the same shall be applicable for the items of respective schedule

Schedule 'A' Part-XII (Miscellaneous works)

Internal Electrification

Item No 01 : M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories. heavy duty ISI marked after chasing in wall / ceiling etc, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed for the following:-

(a) one light point controlled by one way switch 5 amps

(b) one fan point controlled by one way switch 5 amps

(c) one light point controlled by two way switch 5 amps

(d) one 3 pin 5 Amps switch socket outlet controlled by one switch on independent board.

(e) one bell point controlled by one bell switch 5 amps

(f) one 3 pin 5 Amps switch socket outlet controlled by one switch on same board

Item No 02 : M&L for Point wiring for one 5/15 Amps Switch socket combination using approved colour coding as per IS, with multistranded copper conductor 2.5 Sq mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade IS-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories. heavy duty ISI marked after chasing in wall / ceiling etc, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.

Item No 03 : All as per item No. 02 but using multistranded copper conductor 4 Sq mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade IS-694 marked for AC point including PVC insulated multistranded copper conductor 4.0 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed.

Item No 04 : M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and draing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of conductor cable, one run of earth cable and one run of PVC conduit will be measured as one unit.

Item No 05 : M&L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and draing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc two run of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Four runs of conductor cable, two runs of earth cable and one run of PVC conduit will be measured as one unit.

Item No 06 : MCB 'C' series 240/415 volts, 50 HZ, 10 KA breaking capacity, ISI marked (IS 8828), complete of following capacities ;-

(a) MCB SP 5 to 32 Amps.

(b) MCB SPN 5 to 32 Amps.

(c) MCB TPN 63 Amps.

Item No 7 : S & F highly efficient LED Bulbs, 5 Watts direct fit lamp holder, in B-22 cap complete all as specified and as directed.

Item No 8: S&F for LED tube light fitting 10 watt batten aluminium extruded with decorative end caps complete all as specified and directed.

Item No 9 : S & F Energy saving new generation 10 Watts LED bulk head fitting IP65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangement and connected with 3 core multistrnded flexible copper cable PVC insulated of size 23/0.193 mm from ceiling rose to fitting complete all as specified and as directed.

Item No 10 : S & F wall mounted LED tube light fitting 20 Watts batten for surface mounted, anodized extruded aluminium housing, high tranmissitvity diffuser,high lumen out put box type fitting,230 volts and integrated electronic driver connector block etc with warrnty option of 5 years from date of installation and necessary mounting arrangement and connected with 3 core multistrnded flexible copper cable PVC insulated of size 23/0.193 mm from ceiling rose to fitting complete all as specified and as directed.

Item No 11 : S & F LED downlight surface mounted round type 12 watts with AL die-cast body, finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation complete all as specified and directed.

Item No 12 : S&F Energy saving new generation environmental friendly long life versatile pressure die cast aluminum IP 66 for security light fitting luminaries with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed.

Item No 13 : S&F ceiling fan 1200 mm sweep, heavy duty, single phase, AC, 230 volts, 50 Hz, BEE 5 star rating, ISI Marked complete with down rod, canopy, blades, BLDC motor etc incl electrical connections from ceiling rose to fan with 3 core 1.5 sqmm multi stranded copper conductor cable & writing MES No. with synthetic enamel paint complete all as specified and directed.

Item No 14 : S&F energy efficient exhaust fan of 230 mm sweep made of metal body ventil Air - DS type complete with louver with bolts nuts and washers size of the bots 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base complete all as specified and directed.

Item No 15 : M&L for Earthing with Galvanised iron earth plate electrode 600 mm x 600 mm & 6 mm thick burried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL connected to main earthing lead 4mm dia GI wire by means of GI nuts, bolts & washers all as shown in electrial plate No 3 MES Schedule Part I protected by 15 mm bore GI pipe light grade, with & including; PCC 1:3:6 type C1 pit with cover of RCC 1:1.5:3 A1 40mm thick reinforced with 3Nos 6mm dia bars both way, watering arangements with 20 mm GI medium grade pipe ISI marked , GI funnel with GI mesh, filling with common salt & charcoal in alternate layers, necesary excavation and earth works in any type of soil, including test point, testing & commissioning, complete.(Note;- earth lead & protection pipe up to and including 7.5 m length is deemed to included in unit rate quoted by the contractor).

External Water Supply

Item No 16: Construction of brick masonry valve pit chamber of size 900mm x 900mm x 900mm (internal dimensions) including necessary excavation and earth work in any type of soil, angle iron frame MS sheet cover with locking arrangements including painting two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and shown on drawing.

Item No 17: Construction of brick masonry valve pit chamber of size 600mm x 600mm x 600mm (internal dimensions) including necessary excavation and earth work in any type of soil, angle iron frame MS sheet cover with locking arrangements including painting two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and shown on drawing.

External Electric Supply

Item No 18: Supply, install , commisioning and testing of Factory assembled Silent DG Set with AMF Panel of capacity 125 KVA, 100KW, 1500 RPM, Turbo charged, water cooled comprising of 156 BHP Engine with microprocessor based Gen set controller with silencer and canopy for soundless mode (sound level not exc level specified by control pollution board) and alternator both mounted on a common base frame conforming to ISO-3046/BS-5514 and IS-10002 rated for 415 volts 50 cycles, 0.8 Power factor (PF) complete with residential silencer, AVM pads, battery with its lead, first fill of lub oil and all engine accessories such as self starter, alternotor/dynomo with suitable coupling and base frame on foundation as recommended by the manufacture and consisting of other electrical component and maintenance free battey including suitable size of copper cable lead with teminal, all mounting accessory and AVM pads all as specified comprising with the following.(Make: Engine: Cummins Alternator: Stamford/ Kirloskar Green)

A. ENGINE (a) vertical multicylinder, cold starting in accordance with BS-5514/IS-10002 at 1500 PM including the following accessories:- (i) Fuel tank (Suitable for capacity for minimum 12 Hrs run). (ii) Fuel filter (Ore & Micro). (iii) Fuel feed pump (Inline monoblock/PT type) with governor. (iv) Lub oil filter. (v) Lub oil cooler. (vi) Dry type/ol bah type air cleaner. (vii) Exhaust Silencer (Industrial type). (viii) Radiator, Radiator fan & mounting. (ix) Fly wheel with starting ring. (x) Expansion bellow. (xi) Exhaust gas turbocharger.

(xii) 12 Volt electric starter with 01 No. maintenance free battery 180 AH capacity. (xiii) Battery charging alternator (xiv) Engine control panel consisting with ON/OFF Start Key, Lub oil pressure guage, Battery charging ammeter, Coolant temp gauge, RPM Meter etc. (xv) Suitable flexible coupling (xvi) Front & Rear engine mounting supports (AVM pads) B. ALTERNATOR (i) Alternator, 3 phase, 415 Volts, 50 Hzs 0.8 PF 1500 RPM self excited, self regulated screen profacted, drip proof alternator of capacity 125 KVA conforming to BSS 5000 (part 99) with insulation class 'H', single bearing and automatic voltage regulator accessories

C. ACOUSTIC ENCLOSURE (i) Specially design to meet stringent MOEF/CPCB norms of 75 dBA @ 1 mtr at 75% load under free field conditions. (ii) Air inlet louvers specially designed to operate at rated load even at 50 deg C air inlet temp. (iii) Powder coated for long lasting service life and superior finish. (iv) Insulation material meets exacting IS 8183. D. ACCESSORIES (i) Suitable channel frame (ii) storage battery of 12 Volts of suitable 180 AH capacity as per manufactures instruction mounted on angle iron froame of suitable size as directed. E. CONTROL PANEL (a) The control panel shall be made of CRCA sheet duly fabricated and powder coated and complete with internal wiring, bus bar etc and fitted with the following accessories:-

(i) MCCB 4 Pole 200 Amps 36 KA microprocessor release type - 01 No. (ii) Digital Ammeter with CT of size 630/5A - 01 No. (iii) Digital Voltmeter 3 Ph 415 volts - 01 No (iv) Microprocessor based DG set control unit with SIM enable - 01 No (v) Indicating lamps (LED type) (R-Y-B) - 01 set F. AMF PANEL (a) The AMF panel shall be made of CRCA sheet duly fabricated and powder coated and complete with internal wiring, bus bar etc and fitted with the following accessories:- (i) MCCB 4 pole 250 Amps 36 KA microprocessor release type - 02 Nos (ii) Contractor 250 Amps - 02 Nos (iii) Digital Ammeter with CT of size 200/5A - 02 Nos (iv) Digital Voltmeter 3 Ph 415 volts - 02 Nos (v) Indicating lamps (LED type) (R-Y-B) -02 sets (vi) Relay, timmer and other acessories as per manufactor.

NOTE:- (i) Antivitraton mounting pads to be incorported during installation. (ii) PCC Foundation and platform as per manufacters design/recommendation to be followed during installation of DG Set . (iii) Silencer pipe of engine is to be extended out of the building with suitable dia of GI medium grade pipe duly heat insulated with suitable asbestors rops duly claded with plaster of paris rate of which deemed included in the unit rate of Gen Set.

(iv) Lubricating oil shall be provided by the contractor cost of which deemed to be included in the unit rate of DG Set. (v) Four Nos free servicing with complete material such as Lubricating oil, coolent, Lub oil filter, diesel filters, Air filter and fan belts etc as per manufacturer recommendation will be deemed included in the unit rate of DG set.

Item No 19 : S & F LED light fitting for street /security light, energy saving & environmental friendly with long life versatile pressure die-cast housing with toughened glass and high power LEDs with secondary optics of capacity 72 watts 240 volts AC 50 Hz, IP 66 protection with warranty option of 5 years from date of installation complete all as specified and directed.

Item No 20: S&F pole mounted Juction Box for street Lights of size 295 x 195 x 100 mm with two Nos MS flat iron 25X3 clamp and locking arrangements, dust and vermin proof, three phase and neutral aluminium strip busbar of size 20x3 mm of suitable length with maintained the colour code and provision of making holes with GI nuts, bolts & washers for cable connections mounted on hydrograpic insulators with nuts & bolts at both ends of busbar complete all as specified and directed. Make: Sintex, Cat No: GSJB3020 or equivalent model of Hensel/Rittel.

Item No 21: M&L for one run of 3 core 2.5 Sqmm (Nominal Area) PVC Sheathed multi stranded unarmoured copper conductor cable LT 1100 volt grade Conforming to IS 7098 FRLS (inner sheet) from pole junction box to light fitting with suitable size copper cable lugs and connector all complete as specified and directed. Make: Plaza/MESCAB/Polycab/Havells.

Item No 22: Supplying, fabrication, installation and testing of LT panel out door type factory made CPRI approved water and vermin proof, protection of size 1200 mm x 1200 mm x 400 mm (over all dimension) made out of 3.00 mm thick CRCA sheet duly supported with mild steel angle iron of size 40X40X5mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizonatal sides of the frame with front and back side openable, single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation of suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories all complete as specified and as directed. NOTE : Rate of earthwork and PCC work are deemed to be inclusive in this item.

OUTGOING (a) MCCB, adjustable thermal magnetic release type, 4 pole, 415 volts, ICs = 100% Icu, 25 KA breaking capacity, rating 100 Amps including all fixing accessories with both ends spreader links - 03 Nos (b) MCCB, adjustable thermal magnetic release type, 4 pole, 415 volts, ICs = 100% Icu, 25 KA breaking capacity, rating 63 Amps including all fixing accessories with both ends spreader links - 02 Nos (Lift) (c) MCB TPN 32 Amps 10 KA, 'C' series including connection complete- 02 Nos. (d) Multifunctional Digial type timer Switch 240 volts AC Single Phase - 01 No. (e) Power contactor 32 amps 3 pole 415 Volts AC - 01 No (f) Enamelled iron danger notice plate of 1.60 mm thick mild steel sheet of size 200 mm X 150 mm, white with letters, flgures and conventional skull and bones in signal red and fixed with nuts and bolts on door/ shutter of JB for LT -01 No.

Item No 23: Supplying, fabrication, installation and testing of semi-concealed type LT panel in door type factory made CPRI approved water and vermin proof, protection of size 1000 mm x 1000 mm x 300 mm (over all dimension) made out of 2.00 mm thick CRCA sheet duly supported with mild steel angle iron of size 25X25X5mm frame front openable, single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces after necessary preparation of steel surfaces and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment accessories all complete as specified and as directed.

Item No 24 : M&L for Earthing with Galvanised iron earth plate electrode 600 mm x 600 mm & 6 mm thick burried directly in ground (earth pit not less than 2.25 metre deep below normal GL) with top of earth plate not less than 1.5 metre below GL connected to Galvanised steel strip 32x6 mm by means of GI nuts, bolts & washers protected by 40 mm bore GI pipe light grade all as shown in electrial plate No 3 MES Schedule Part I, with & including; PCC 1:3:6 type C1 pit with cover of RCC 1:1.5:3 A1, 40mm thick reinforced with 3Nos 6mm dia bars both way, watering arangements with 20 mm GI medium grade pipe ISI marked , GI funnel with GI mesh, filling with common salt & charcoal in alternate layers, necesary excavation and earth works in any type of soil, including test point, testing & commissioning, complete.(Note;-Earth protection pipe & earth strip up to and including 7.5 m length is deemed to included in unit rate quoted by the contractor).

COOLING APPLIANCES

Item No 25 : Supply and fixing self contained drinking water cooler fully stainless steel electric driven 230 Volts 50 cycles AC supply single phase having approx storage capacity of 80 litre and normal cooling capacity of 40 litre per hour complete all as specified and directed. (Make: Voltas/Usha/Blue Star)

Item No 26: Supply, installation & testing Refrigerators electric driven (single Phase), 240 volts, 50 Hz, single door, capacity 195 litres BEE 5 Star rated , frost free, auto defrost to stop ice buildup, invertor compressor, energy efficient, less noise and more durable toughened glass inner self with all accessories complete all as specified and directed. (Make: Samsung/LG/Whirlpool)

Item No 27: Supply and fix Voltage stablizer for automatic operation single phase naturally air cooled indoor type and disigned for input variation between 120 Volts to 280 Volts with output voltage stabilised at 230 Volts with accuracy of + 2.5% and capacity 1 KVA complete all as specified and directed. (Make: V- Guard/Volina/AE)

Item No 28: Supply and fix Voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 120 Volts to 280 Volts with output voltage stabilised at 230 Volts with accurcy of + 2.5% and capacity 2 KVA complete all as specified and directed. (Make: V- Guard/Volina/AE)

AIR CONDITIONING

Item No 29: Supply, installation and testing high wall split units indoor and outdoor complete unit with cordless remote control unit and with in-built air ioniser and Plasma filter for better indoor air quality with with 2.5 filter, BEE 5 star rating and EER 3.2 of capacity 1.5 TR (Ton of refrigeration) including metal wall hanger of suitable size for fixing outdoor unit at wall complete all as specified and directed.

Item No 30: Supply, installation and testing high wall split units indoor and outdoor complete unit with cordless remote control unit and with in-built air ioniser and Plasma filter for better indoor air quality with with 2.5 filter, BEE 5 star rating and EER 3.2 of capacity 2.0 TR (Ton of refrigeration) including metal wall hanger of suitable size for fixing outdoor unit at wall complete all as specified and directed.

Item No 31: Supply and fix Voltage stablizer for automatic operation, single phase naturally air cooled indoor type and designed for input variation between 120 Volts to 280 Volts with output voltage stabilised at 230 Volts with accurcy of + 2.5% and capacity 5 KVA with digital volt meter complete all as specified and directed. (Make: V- Guard/Volina/AE)

Road Path and Culvert

Item No 32: M & L for Single RCC hume pipe culvert of 450mm dia 6 mtr long class NP3 including necessary excavation and earth work in any type of soil complete all as specified and shown on drawing.

Item No 33: Design, supply, installation, testing & commissoning passengers lift, speed 1.0 metre/sec, lift with single speed motor 415 volts, 3 phase, AC 50 Hz supply conforming to IS-14665, suitable to carry 15 passengers (1020 Kgs) and serve upto G+3 upper floors Hospital stretcher having SS car enclosure of size 1000 X 2400 mm with AC variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening doors with door drive (electric motor dirven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door) complete all as specified and directed with following specifications:-

(a) Capacity- 1020 Kg (b) Speed- 1.0 m/s (c) Rise- 16 m (d) Stops-4 stops with all opening on same side (e) Controller type-ACD3-MR (f) Drive-VF Regenerative (Closed loop) (g) Power supply- 400/415 Volts 3 Phase AC 50 Hz (h) Operation- Full collective operation (i) Car group- One car (Simplex) (j) Machine- PM Gearless (Located above shaft) (k) Traction media- Flat coated steel belt (l) Car finish Rear mid panel = Stainless steel # 4 (Hairline) Rear corner Panels = Stainless steel # 4 (Hairline) Side Panels= Stainless steel # 4 (Hairline) Front panels = Stainless Steel # 4 (Hairline) (m) False ceiling type-CD-41 (n) False ceiling finish- Stainless steel#4 (Hairline) (o) Ventilation-Cross flow fan (p) Hand rails-Stainless steel mirror finish handrails on rear car panels

(q) Flooring- Vinyl tiles (r) Car door finish-Stainless steel#4 (Hairline) (s) Landing door finish-Stainless steel # 4(Hairline) (t) Fire rated doors-Fire rating-120 mins (u) Pit Depth-1350 (v) Overhead- 5000 (w) Hoistway dimensions (WXD in mm)- 1800 mm X 3000 mm (x) Car dimension (WXDXH in mm)-1000 mm X 2400mm X2200 mm (y) Car & Hoistway door type-Central opening (CO) doors (z) Door opening (WXH) in mm -900mmX2000 mm

(aa) Door operator- DC Door operator (ab) COP-COp for stops<= 12 (950 mm) in stainless steel # 4 (Hairline) (ac) Car position indicator- Monochrome LCD-Blue Background & White font. (ad) Hall fixtures - O2000 (ae) Hall fixture face plate- Stainless steel# 4(Hairline) (af) Hall button arrangement- Hall button with HPl (ag) Standard features- Anti nuisance car call protection, Independent service (for duplex only), Overload device, Nudging, emergency firemen's service, Emergency car light unit, Infrared curtain door protection, Door time protection, emergency alarm button, Extra door time of lobby & parking, Door open/close button, Manual rescue operation, Belt inspection drive, Auto fan cut off (ah) Options Included: Automatic rescue operation, Voice synthesizer

Item No 34: Design, supply, installation, testing & commissoning passengers lift, speed 1.0 metre/sec, lift with single speed motor 415 volts, 3 phase, AC 50 Hz supply conforming to IS-14665, suitable to carry 13 passengers (884 Kgs) and serve upto 6 floor (G+3 upper floors) having SS car enclosure with AC variable Voltage & Variable Frequency drive (VVVF drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendant, centre opening doors with door drive (electric motor dirven mechanism), sliding stainless steel doors, automatic rescue device (ARD) system, 3D infra red sensor in full height of door & built in announcing system without hand set (04 Nos, one each in car, Machine room & near Ground floor landing door) complete all as specified and directed with following specifications:- (a) Capacity- 884 Kg (b) Speed- 1.0 m/s (c) Rise- 16 m (d) Stops-4 stops with all opening on same side (e) Controller type-ACD3-MR (f) Drive-VF Regenerative (Closed loop) (g) Power supply- 400/415 Volts 3 Phase AC 50 Hz

(h) Operation- Full collective operation (i) Car group- One car (Simplex) (j) Machine- PM Gearless (Located above shaft) (k) Traction media- Flat coated steel belt (l) Car finish Rear mid panel = Stainless steel # 4 (Hairline) Rear corner Panels = Stainless steel # 4 (Hairline) Side Panels= Stainless steel # 4 (Hairline) Front panels = Stainless Steel # 4 (Hairline) (m) False ceiling type-CD-41 (n) False ceiling finish- Stainless steel#4 (Hairline) (o) Ventilation-Cross flow fan (p) Hand rails-Stainless steel mirror finish handrails on rear car panels

(q) Flooring- Vinyl tiles (r) Car door finish-Stainless steel#4 (Hairline) (s) Landing door finish-Stainless steel # 4 (Hairline) (t) Fire rated doors-Fire rating-120 mins (u) Pit Depth-1350 (v) Overhead- 5000 (w) Hoistway dimensions (WXD in mm)-1800 mm X 2400 mm (x) Car dimension (WXDXH in mm)-1100 mmX2000mmX2200 mm (y) Car & Hoistway door type-Central opening (CO) doors (z) Door opening (WXH) in mm -800mmX2000 mm

(aa) Door operator- DC Door operator (ab) COP-COp for stops<= 12 (950 mm) in stainless steel # 4 (Hairline) (ac) Car position indicator- Monochrome LCD-Blue Background & White font. (ad) Hall fixtures - O2000 (ae) Hall fixture face plate- Stainless steel#4(Hairline) (af) Hall button arrangement- Hall button with HPl (ag) Standard features- Anti nuisance car call protection, Independent service (for duplex only), Overload device, Nudging, emergency firemen's service, Emergency car light unit, Infrared curtain door protection, Door time protection, emergency alarm button, Extra door time of lobby & parking, Door open/close button, Manual rescue operation, Belt inspection drive, Auto fan cut off (ah) Options Included: Automatic rescue operation, Voice synthesizer

Fire Fighting and Fire Detector System

Item No 35: M & L for Hydrant valve single headed of size 63 mm dia complete all as specified and as directed.

Item No 36: M & L for Hosebox for hose reel 20 mm dia size of 30 Mtr length complete with coupling branch pipe and nozzle MS sheet 2 mm thick complete all as specified and as directed.

Item No 37: M & L for Hosebox for keeping 2 Nos hose pipe of length 15 meters each, branch pipe, nozzle, coupling etc MS sheet 2 mm thick complete all as specified and as directed.

Item No 38: M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Four runs of 6 sqmm cable, two runs of 6 sqmm cable and one run of PVC conduit will be measured as one unit

Item No 39: Supply and fixing DOL starter in sheet metal enclosure 3 phase AC 415 Volts, 50 Hz, 5 HP 3.75 KW including necessary elactrical connections complete all specified and directed

Item No 40: M & L for Point wiring for smoke detector using PVC insulated PVC unsheathed electric FRLS cable 1100V grade single core having multi stranded copper conductor of size 1.5 Sqmm nominal cross sectional area in & including MS conduit ISI marked medium grade not less than 20 mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good disturbed surface of wall and 1.5 sqmm green PVC insulated unsheathed copper conductor as a earth wire connected to earth dolly by providing lugs excluding MS boxes junction box complete all as specified and as directed.

Item No 41: M&L sub main wiring with 2 run of 4.00 sqmm (nominal cross-sectional area) PVC insulated (FRLS) unsheathed single core cable of working voltage 1100 volts grade with stranded copper conductor including one run of 2.50 sqmm (nominal cross sectional area) PVC insulated (FRLS) unsheathed cable with stranded copper conductor as continuous earth wire connected in common earth dolly drawn in PVC rigid non- metallic conduit complete all as specified and as directed. (NOTE : (i) MS conduit shall be measured & paid separately. (ii) Two run of submain wiring cable alongwith one run of earth wire shall be measured as one length).

Item No 42: Supply & Fixing Exist sign board or information board duly fabricated with flexo sheet or high grade quality and writing/ printing of information/picture/drawing/layout pln over flexo sheet duly structure framed with square iron bar of suitable size and fixed with suitable screws complete all as specified and as directed.

Item No 43: Supply only BIS approved, ISI marked CO2 type store pressure fire Extinguisher capacity of 9 Ltr conforming to IS-6234/940 complete all as specified and as directed.

Item No 44: Supply only BIS approved, ISI marked ABC type dry powder fire Extinguisher capacity of 5 Kg conforming to IS-13849 complete all as specified and as directed.

Item No 45: Supply only BIS approved, ISI marked CO2 type fire Extinguisher capacity of 5 Kg for 'B' & 'C' class of approved by explosive depatment, Govt of India Nagpur and conforming to IS-2878 complete all as specified and as directed.

Item No 46: Supply only BIS approved, ISI marked CO2 type fire Extinguisher capacity of 3 Kg for 'B' & 'C' class of approved by explosive depatment, Govt of India Nagpur and conforming to IS-2878 complete all as specified and as directed.

Item No 47: M&L for 100 Watt amplifier complete all as specified and directed.

Item No 48: M&L for control console complete all as specified and directed.

Hot Water Supply

Item No 49: Supply, installation and testing of electric water heater storage vertical type,BEE 5 star rated, 25 ltr capacity comprising of high wattage heating element for instant heating, extra Mild steel with Glass lined coated inner tank, rust & shock proof ABS outer body, non-ferrous pressure plate with & including provn of 04 Nos grouting bolts suitably flushed to wall or any other surface including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable/ flexible chord and one no 15 amps 3 pin plug top complete all as specified and as directed. Make: Havell's/Bajaj/CG/Racold.

HI TECH COLONISERS PRIVATE LIMITED

Jupiter International Sales