Civll works for renting out

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

For thickness of tiles 10 mm to 25 mm

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Dismantling I.W.C. Pan in toilet along with flooring concrete/ Brick jelly concrete upto 45cm depth to an area of toilet room size including disposal of dismantled materials within 50 m lead and all lifts all complete as per directions of Engineer-in- Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:

1:4:8 (1 cement : 4 M sand : 8 graded stone aggregate 40 mm nominal size)

Supplying and filling in plinth with " M" sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and fixing unplasticised Rigid PVC pipes conforming to IS 13592 Type B jointed with sealant all complete

75 mm diameter

110 mm diameter

Providing and fixing PVC moulded fittings/ accessories for unplasticised Rigid PVC pipes with solvent cement all complete as directed by the Engineer in Charge.

110 mm bend

Providing and fixing PVC trap of self cleaning design including cost of cutting and making good the walls and floors etc complete as directed by the Engineer-in-charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required :

European Type W.C. pan with white solid plastic seat and lid

Taking out existing sanitary fittings like wash basin (2 no), urinal (2no) , EWC (1 no) and refixing it in new position with necessary screws and fischer Anchor bolts 10x140,32 mm C.P. brass waste of standard pattern for wash basin, With necessary screws and white cement packing for urinals and EWC including connecting the drain line, deep cleaning of the fittings with required chemicals to remove off stains etc., all complete as directed by the Engineer-in-Charge.:

Deep Cleaning of toilets water closet and wash area wall and floor tiles, platform etc. using toilet cleaning acid /chemicals to remove off the stains, dirt etc. to facilitate comfort usage all complete as directed by the Engineer-in-Charge.

Providing and fixing unplasticised PVC connection pipe with brass unions :

30cm length,15 mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe,32 mm dia

Providing and fixing C.P. brass bib cock of approved quality :

15 mm nominal bore.

Providing and fixing PTMT stop cock of approved quality and colour:

15mm nominal bore

Providing and fixing C.P. brass pillar cock of approved quality :

15 mm nominal bore

Providing and fixing C.P. brass health faucet of standard design and of approved make.

15 mm nominal bore

Providing and fixing PVC floor grating of approved design complete.

Cutting and altering the available wooden door frame and shutter to the required size and fixing at new positions using necessary hold fast, hinges, screws to facilitate easy opening and closing all complete as directed by the Engineer-in-charge.

Providing and fixing 1mm thick PVC laminate sheet for bathroom door to protect wooden door from water spillage all complete as directed by the E-in-Charge

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete :-

Twin rubber stopper

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of ISt quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :

Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

Two or more coats on new work.

Demoishing brick work for raising the toilet door for a size of 0.9*0.23*0.45 and plastering the edges with cement mortar plaster as directed by the Engineer in Charge.

Providing ANG Partition with available materials (Al,Novappan &Glass )and door frame with shutter at new locations including cutting /altering to required to size using new screws ,available brackets and hinges etc. all complete as directed by the Engineer-in-charge.

Making door opening in brick masonry to required size and plastering the jambs, sills and soffit i/c disposal of mulba/rubbish to within 50m lead all complete as per directions of Engineer-In-Charge.

For door/ window/ clerestory window.

Dismantling wooden door frame and shutter including refixing at new psotion with new holdfast and necessary hinges etc. completeas directed by the Engineer in charge.

Half brick masonry with common burnt clay bricks of class designation 50 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

12 mm cement plaster of mix :

1:6 (1 cement: 6 coarse sand)

15 mm cement plaster of mix :

1:6 (1 cement: 6 coarse sand)

Supplying and Filling in plinth with debrish under floors, including watering, ramming, consolidating and dressing all complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level.

1:4:8 (1 cement : 4 M sand : 8 graded stone aggregate 40 mm nominal size)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.

40 mm thick with 20 mm nominal size stone aggregate

Transportation of ANG partition materials from St. Thomas mount TE buildig to Chromepet TE building including sorting, loading and unloading and stacking at site complete as directed by the Engineer in Charge.

Providing ANG Partition with available materials (Al,Novappan &Glass )and door frame with shutter at new locations including cutting /altering to required to size using new screws ,available brackets and hinges etc. all complete as directed by the Engineer-in-charge.

Supplying and fixing of moisture resistant/ fire resitant cement board as per standard sizes fixed with self drilling / tapping screws. Screws shall be of counter sunk head of 1.6mm to 4mm thick or 8 to 10 gauge of length varying from 25 to 45mm including fixing PVC beading at Joints.

Cement bonded particl board 8mm thick (Termite, fire and moisture resistant )

Deep cleaning of Mosaic flooring to remove off dirt, dust,stains etc by manually or required machines using necessary floor cleaning liquid and with required safety measures to protect exsiting ANG partitions all complete as directed by the Engineer-in-charge.

Carpet area

Demolishing cement concrete work by mechanical means and disposal of the unserviceable materials within 50 lead.

Dismantling the cable runway and posts and stacking the same within the campus as directed by the Engineer in charge. Cable post height 6m and runway length approx 7m

Please Enable Macros to View BoQ information