Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.4 LAccepted-AOC | ₹8.4 L | L1 | Accepted-AOC L1 |
| 2 | Rejected-Technical | - | - | Rejected-Technical L2 |
| Sl No | Description | Qty | Unit | Hariharan R Rudra Infra Tech L2 | CHANDRA MOULI L1 |
|---|---|---|---|---|---|
| 1.00 | Supply ,Erection , Testing and Commissioning of liquid bassed Chlorine Dosing System for Water Supply under following specifications.
A.) PREPATION TANK & STORAGE TANK
TYPE: 500 LITRES, Fiber Reinforced Plastics
SIZE:(ID X HEIGHT X THK)mm STD
LIFTING HOOK "SUITABLE LIFTING
DEVICE SHALL BE PROVIDED ON SKID."
USABLE CAPACITY:PREPARATION & STORAGE 525 LTR
LIQUID / SOLUTION TO BE HANDLED: CHLORINE
MATERIAL OF CONSTRUCTION: PP/LLDPE
DESIGN PRESSURE ATM+FULL OF LIQUID
TESTING: LEAKAGE TEST: WATER FILL UP
QUANTITY: 01 NOS.
B.) DOSING PUMP/TRANSFER PUMP
MAKE : ROTOMACK/ACL/ROTOPUMP
MODEL: MMDP-1
TYPE: MEACHANICAL DIAPHRAGM TYPE
OFFERED CAPACITY 0-75 LPH
SPM/RATIO 100/15:1
DIAPHRAGM PTFE
FLOW CONTROL MANUALLY
TURN DOWN RATIO 10:1
PUMP STANDARD MFG STD
EFFICIENCY/ACCURACY 97% / +_3%
SUCTION FLANGED TYPE
DISCHARGE PRESSURE 4.0 KG/CM2
PRV SET PRESSURE 5.0 KG/CM2
CONNECTION SUCTION 15 NB
CONNECTION DISCHARGE 15 NB
MATERIAL OF WETTED PARTS PP
QTY. 02 NOS. [ 1W + 1S ] | 1 | No | 8,45,000 ₹8,45,000 | 8,38,000 ₹8,38,000 Lowest |
| 2.00"C.) " PUMP DRIVE MOTOR MAKE: CGL/BBL TYPE: "SQUIRREL CAGE INDUCTION MOTOR IEC zone- IE 2" SUPPLY SYSTEM: 3 PH. INDUCTION, AC, 415V ± 10%, 50 HZ+_5% MOUNTING/DEG PROTECTION: B 3 (FOOT MOUNTED) / IP 55 NO OF POLES/ RPM: 4 POLES /1440 RPM INSULATION CLASS / TEMP RISE: CLASS F / LIMITED TO CLASS B METHOED OF COOLING: TEFC APPLICABLE STANDARDS: IS 325 RATING: 0.5 HP MOTOR FRAME TYPE: AS PER DIN / IEC 34-7 DUTY CLASS: S1: 100% CONTINUOUS OPERATION NOISE LEVEL(LESS THAN): 85 DB (A) AT A DISTANCE OF 1 MTR. QTY: 02 NOS. D.) MOTOR -PUMP SHAFT COUPLING MAKE: RATHI COUPLINGS/EQUIVALENT TYPE: LOVE JOY/SUITABLE FLEXIBLE COUPLING QTY: 01 NOS. E) FITTING AS PER ANSI 16.11 B MAKE : REPUTED & APPOVED ISO-9000 CERTIFIED SUPPLIER TYPE: 15 NB (SW) MATERIAL OF CONSTRUCTION : PP | |||||
| 3.00F) FLANGES AS PER ANSI 16.5 B SIZE: 15 NB SWRF # 150 MATERIAL OF CONSTRUCTION: PP/UPVC INLET TERMINAL FLANGES/TANK FLANGES 15 NB SWRF # 150 OUTLET TERMINAL FLANGES/COMPANION FLANGES 15 NB SWRF # 150 QTY AT ACTUAL G) PULSATION DAMPNER TYPE VOLUME BOTTLE TYPE CAPACITY 1.5 LIT MOC PP/UPVC QTY 01 NOS H.) PRESSURE GAUGE WITH ISOLATION VALVE MAKE WAREE / WIKA/STD TYPE BOURDON SENSING TYPE MOUNTING DIRECT BOTTOM DIAL SIZE 100 MM MOC SS ACCURACY 0.02 RANGE 0 –14 KG/CM2 QTY 01 NO I.) NRV TYPE LIFT CHECK TYPE END CONNECTION 15 NB SW MOC PP/UPVC QTY 01 NOS | |||||
| 4.00J.) PRV TYPE SPRING LOADED CONNECTION 15NB 300# PRV SET PRESSURE 5.0 KG/CM2 MOC PP/UPVC QTY 01 NOS K.) STRAINER FLITRATION RATING 40 MESH SIZE 15 NB MOC PP/UPVC QTY 01 NO L.) LEVEL GUAGE 0.00 TYPE TRANSPARENT TUBULAR TYPE MOC PP END CONNECTION 15 NB 150# FLANGED QTY 1 NOS M.) BALL VALVE MAKE: ASTRAL/FINOLEX/STD TYPE: BALL VALVE FOR SUCTION & DISCHARGE MATERIAL OF CONSTRUCTION: PP/UPVC END CONNECTION: SW SIZE 15 NB SW # 150 QTY AT ACTUAL | |||||
| 5.00N.) PIPING WITHIN THE SKID 0.00 SIZE / RATING OF PIPE: 15 NB SEAMLESS SCH40/80 SUCTION MOC: PP/UPVC DISCHARGE MOC: PP/UPVC O.) GASKETS MATERIAL OF CONSTRUCTION: SPIRAL WOUND GASKET CS OUTER INNER SS QTY AT ACTUAL P.) FASTNERS 0.00 MAKE STANDARD MATERIAL OF CONSTRUCTION: MS GALVANISED QTY AT ACTUAL Q.) SKID/BASE FRAME BASE FRAME A COMMON BASE FRAME FOR TANK, PUMP ANDLIFTING LUGS, SUPPORTS SHALL BE PROVIDED 0.00 TO AND ABOVE SCOPE OF SUPPLY STOOL FOR PUMP PUMP SHALL REST NOT LESS THEN 300MM FOUNDATION BOLT M-12 X 150 MM MATERIAL OF CONSTRUCTION CS ( IS : 2062 ) PRIMER/ZINC RICH EPOXY FINISH/HIGHBUILT EPOXY FRAME SHALL BE PAINTED WITH 2 COATS OF EPOXY PRIMER AND 2 COATS OF EPOXY PAINT, AGITATOR WITH CONTRAL PANEL SET 0.5 Hp - 01 No Characteristics On-Off MaxTorque(NM) 50NM TravelTime(sec)for90° 19seconds MotorPower(watt) 6watt RatedCurrent(amp.) 0.15amp. Lock(amp.) 0.22amp. PositiononPowerFailure StayPut/FailLast Featuresandfunctions 0.00 ActuatorManufacturingStd. IEC/EN15714-2 | |||||
| 6.00Motor ReversibleInductionmotorAccordingtoIEC60034-1 Duty S2-30min MethodofStarting DirectonLineStarting MainVoltage&Frequency 220VAC,50/60Hz Tolerance–Appliesforrated performance, duty cycle & speed is not guaranteed VoltageTolerance+/-10%FrequencyTolerance+/-5% InsulationClass ClassFwithtemperatureriserestrictedtoclassB Motorprotection Built-inthermalprotection Manualoperation Manualdriveforsetting&emergencyoperation,WrenchType Self-locking • "ProvidedbyHeavy-dutymetalgearsdrive, noadditionalbrake required." Electricalconnection Terminalconnection Threads for cable entries / Threads2*PG13.5\ cable gland Gland 1*PG13.5 Mechanicalswitchcompartment 0.00 Limitswitching Open/Close,(2)Operational&(2)Auxiliary Switchrating SPDT,16A1/2HP125/250VAC,0.6A125VDC,0.3A 250VDC; Switchmaterials Silver(AG) (Optional) Positionfeedbacksignal,analogue feedback Potentiometer(ohm)or4–20mA(electronicpositiontransmitter)2 wire system Mechanicalpositionindication Continuouspositionindicator,adjustableindicatordiscwitharrow. SpaceHeater Anti-condensation5-10W(Standard)30- 45 W (Low-Temp optional on request) | |||||
| 7.00T. Features&serviceconditions 0.00 ValveAttachmentmounting AccordingtoENISO5210 BodyMaterial AluminumAlloy Enclosureprotection Weather proof Ambient temperature -10ºCto+55ºC ColourCode WhiteAluminumRAL-9006 Coating Doublelayerpowdercoating/DryPowderCoated Lifetime DesignlifeaccordingtoEN15714-2 U. ApplicableDirectives 0.00 ECMachinery- Accordingto2006/42/EC LowVoltage- Accordingto2006/95/EC EMC- Accordingto2004/105/EEC | |||||
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
7 Mar 2025, 3:00 pmClosed
Executive officer
Annur Town Panchayat
Design , supply ,Erection , Testing and Commissioning of liquid bassed Chlorine Dosing System for Water Supply at Annur Town Panchayat.
2025_DTP_529888_1
89/2025/A2
Open Tender
Civil Works - Water Works
Works
120 days
Annur Town Panchayat
as per norms
1 document required · 1 mandatory
₹0
₹20,000
19 Jun 2026
5 Mar 2025
7 Mar 2025
5 Mar 2025
7 Mar 2025
5 Mar 2025
5 Mar 2025 - 7 Mar 2025
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .