Development of Pedestrian Spine and Revitalization of Patto Area - Open Spaces at Central Library, EDC, Island, Area along Government Quarters and Foot Bridges (Civil and Electrical works)

Amount

SITE CLEARING

Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area

Felling trees of girth(measured at a height of 1. m. Above ground level) inluding cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads : (a) Beyond 30 cm and upto 60 cm girth

Clearing jungle including up rooting of rank vegetation grass bush wood trees and sapling of girth upto 30 cm. measured at a height of 1 m above ground level & removal of rubbish upto a distance of 50 mt. outside the periphery of the area cleared. (if however, only grass is met with the area will be measured and paid for under item 4001).

FOUNDATION PILES

Boring holes vertically true to line and form for R.C.C. bored piles of required diameter in all strata except hard rock including removing slush, all kinds of soil and rock, percolating water etc. complete from the above to keep ready for concrete after placing reinforcement but excluding the cost of providing and laying concrete and reinforcement. 600mm dia bore : (i) upto 12m from ground level

(ii) Above 12m but upto 15m depth add 5%

(iii) Above 15m and upto 18 m depth add 5%

(iv) Above 18m but upto 21m depth add 5%

(v) Above 21m but upto 24m depth add 5%

Providing and laying reinforced cement concrete of grade M35 (mix design) with coarse sand and graded granitic or basaltic aggregate 20mm nominal size as per mix design requirements in bored piles of specified diameter at the required workability and compaction as per the direction of the Engineer-in-charge including all operation for placing the concrete, lifting the casing in stages etc. but excluding the cost of reinforcement. 600mm dia pile : (i) upto 12m from ground level

(ii) Above 12m but upto 15m depth add 5%

(iii) Above 15m and upto 18 m depth add 5%

(iv) Above 18m but upto 21m depth add 5%

(v) Above 21m but upto 24m depth add 5%

Conducting low strain pile integrity test on RC bored pile foundations using pile integrity tester equipment manufactured by pile dynamics inc. of USA or TNO of Netherlands, conforming to ASTMD-5882.

Providing Steel Liner 6mm thick for Piles including Fabricating and Setting out as per Detailed Drawing

Providing corrosion resistant steel CRS-50 bars of (SAIL, TATA. VIZAG only)(Confirming to IS 1786 if 1985) for RCC work including bending, binding & placing in position in all the floors along with factory made precaste concrete cover blocks of specified sizes whose compressive strengthis not less than that of surrounding concrete in the structural member.

EARTHWORK

Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.) Marshy soil upto 3 m depth Mechanical means

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete. (i) sand

(ii) moorum

CONCRETE PLAIN AND REINFORCED

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : (a) All works upto plinth level

Providing and laying plum concrete in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded With laterite stone plum ) with plums not exceeding 15% of the volume of the finished concrete of size ranging from 150 to 300 mm (but the maximum dimension not exceeding 1/3rd (one third) the least dimension of member under consideration excluding the cost of centering and shuttering in foundation and plinth.

Providing and laying in position ready mixed concrete (RMC) with usage of Ground Granulated Blast Furnace Slag (GGBS) as per IS 12089 and IS456-2000 manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 20 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level. (i) M-15 grade of concrete

(ii) M-30 grade of concrete

Providing and laying in position machine batched concrete (BMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. M30 grade of reinforced cement conrete by using 410kg of cement per cu.m. of concrete. All works upto floor V level.

Skate park Finishes: Laying skate park concrete which should be finished in three stages by using wooden floats, magnisium floats and finally steel trowels to get high quality surface finish complete as per the instruction of Engineer in charge.

REINFORCING STEEL

Providing corrosion resistant steel CRS-50 bars of (SAIL, TATA, VIZAG,JSW Steel Ltd.) (Confirming to IS 1786 if 1985) for RCC work including bending, binding & placing in position in all the floors along with factory made precaste concrete cover blocks of specified s izes whose compressive strengthis not less than that of surrounding concrete in the structural member.

FORMWORK

Centering & shuttering including Strutting,Propping &removal of forms for : (i) Foundations, Footings, Bases for columns

(ii) Vertical surfaces such as retaing walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like

(iii) Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth

(iv) Suspended floors, roofs landings, shelves & their supports

Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates. (a) Columns, Pillars, Posts & struts (circular or curved in plan)

Providing and laying in place Decking sheet, minimum yield stress 500 MPa ,1.2 mm thick, over steel floor beams at all levels, with stitching the side laps with seal and tapping screws 15mm long@ 660mm center to center. The decking sheet shall be hot diped galvanised with zinc coating of 275 GSM on both sides of the deck etc complete as directed by Engineer in charge.

Providing and laying in place Decking sheet Edge Trim of 0.7mm thick galvanised at 275 GSM with a total girth of 450-500 mm with restrain strap at 600 mm centres approximately as directed by Engineer in charge, etc. complete.

MASONRY

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.

Exposed decorative laterite masonry using Patradevi stone of size as specified and laid as directed by architect in cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and laying Autoclave Aerated cement blocks masonry (Light Weight Foam Concrete Blocks) with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in proprietary synthetic cement mortar. The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.

PLASTERING & POINTING

12mm cement plaster 1:3 (1 cement : 3 fine sand)

Providing and doing 20mm cement plaster 1: 3 (1 cement : 3 fine sand) by adding water proofing material proportion recommended by the manufacturers.

6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand)

PAINTING

Providing and applying Wall painting (two or more coats) with plastic emulsion paint over white cement based putty of average thickness 1.00mm and applying one coat of cement primer of approved brand and manufacture on new work to give an even shade.

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.

STRUCTURAL STEEL

Providing, Fabricating and erecting in position at all heights and depths above and below finished ground level, alignment, levelling, welding/bolting of structural steelwork as specified but not limited to all members of building structures such as all types of columns, bracings, roof legs, platforms, roof trusses, purlins, lacings, inserts, stiffeners, side and gable runners, beams, floor & platform supports, staircases, sag rods and tie rods including, all gusset plate, cleat angles,cladding runners ,threading, nuts, washers etc., and all other miscellaneous structural steelwork as specified and as shown on drawings and/or as directed by the Engineer In Charge with all contractor's materials, labours, tools, cranes, plant, machineries, consumables etc. including supplying and fixing connection/erection bolts as specified, nuts, washers, fittings, fixtures etc. complete in all respect and to the satisfaction of Engineer In Charge. E 7018 welding electrodes of approved make as specified should be used. Blast cleaning to SA 2 1/2 standard and cleaning with dry cloth.Protective coating shall be ZINC ALUMINIUM METALLISATION.This shall comprise of application of Zinc (85%),Aluminium (15%) spray applied alloy with sealer coat (150 microns zinc aluminium coating + 5-10 microns sealer coat)followed by 2 coats of PU paint finish. Metallisation shall be as per specifications and PU paint shall be as per manufacturers specifications .All fabrication works shall be carried out in fabrication shops to be approved by engineer in charge.etc. complete. On ground - RHS/SHS YST-310 (TATA STRUCTURA))

On ground - RHS/SHS YST-250 (TATA STRUCTURA))

On ground - Rolled Section E 250

On water - RHS/SHS YST-310 (TATA STRUCTURA))

SHEETING & ACCESSORIES

Supply & Installation Zinc Standing Seam Insulated Roofing System with with following specification. Top panel of 0.7mm thickness , Stainless Steel 304 Sliding & Fixed Clips, 100mm wide plain GI Strips, Synthetic Mesh - Anti-abrasive breathable membrane, Bare Galvalume Low Rib corrugated sheet having 0.47mm TCT, 1.5mm thick Galvanised Steel Z girt section , 100mm thick 64kg/m3 density Rockwool Insulation Layer with VCL, Hi-rib colour coated Galvalume sheet having 0.5mm TCT with 550MPA tensile strength and AZ 150gm/sqm coating complete as per direction of Engineer in charge. etc. complete.

Supply & Installation charges for the Zinc flashings with following girth complete as per direction of Engineer in charge. (i) Girth up to 166mm.

(ii) Girth up to 333mm.

(iii) Girth up to 500mm.

Providing and fixing automatic Turbo air ventilator of Aluminium material of 600 mm diameter and 450 mm hight to be fixed on roof complete as per the directions of Engineer in charge. Etc.

DOORS & WINDOWS

Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wooden styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) and printed matt having wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade Block Board. The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory. Accessories: i) S. S. Hinges 4” - 3 Nos ii) S. S. Latch - 1 No iii) Tower Bolt 5” - 2 Nos iv) Handle 5” - 2 Nos (b) 35 mm

Providing and fixing in position collapsible steel shutters with vertical channels 20 mm x 10 mm x 2 mm and braced with flat iron diagonals 20mm x 5mm size with top and bottom rails of T-iron, 40 x 40 x 6 mm with 38 mm dia. Steel pullys completely bolts locking arrangement, stopper, handles including applying a priming coat of red lead paint.

Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S. top cover of 1.25mm thick for folling shutter stop cover and spring.

Providing and fixing of Aluminium windows with three tracks and three shutters sliding windows with tubular frame sections powder coated with pure polyster powder of thickness 15-80 microns with approved standard acessories such as ball bearing rollers concealed lock, 6mm plain clear glass with EPDM beading etc.

Providing and fixing of top hung openable ventilator with aluminium sections outer frame sections made of size 45mm x 47mm, shutter section made of size 52 x 67mm, glazed with round clip of size 27mm x 25mm duly color anodized to 20mm microns thickness, 5mm thick frosted glass with friction stay hinges, single point handle and silicon sealant etc. complete.

FLOORING

Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)

Kotah stone slab flooring over 25 mm thick in risers of steps, skirtings, dado & pillars laid on 12mm (average) thick cement mortor 1:3 (1 cement : 3 coarse sand) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.

Providing and fixing Kota stone tread tiles 35mm thick in single piece with rounded of nosing antiskid groove laid on and including 20mm (average ) thk bed of cement slurry including pointing with pigmented cement slurry to match the shade of the slab, cleaning etc. complete.

Providing and fixing vitrified matt finished (600x600) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.

Providing and fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps and dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade complete. (b) 600 x 600 mm - light Shades

Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.

Providing and fixing Second class Indian teak wood plank in flooring and backing for including fixing with SS316 grade screws complete.

Combination of Cuddappah and Kotah stone slab 25mm thk. machine cut flooring over 20mm (average) thickness of cement mortar 1:4 (1 cement : 4 coarse sand laid over and jointed with grey cement slurry to form the paving pattern as per architectural drg.

Providing 20mm thick Jet black granite slab to urinal partitions with cement complete

Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with aspeed of 3200 rpm. (a) 80 mm thick in grey colour (M40 grade)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of Jet Black colour and shade, area of slab over 0.50 sqm

Providing and fixing Jet black Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing and fixing 10mm Hand Painted vitrified tiles in floors on 25 mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.

Providing and laying 25 mm shahabad stone flooring on ground complete.

Painting 2 coats with oil type wood preservative of approved brand & manufacture on new work.

Paint+B83:B98+B93:B98ing 1 coat with oil type wood preservative of approved brand & manufacture on old work once in a year for 4 years after completion during defect liability period. (payment will be made yearly after completion.)

DISMANTLING DEMOLISHING & REPAIRS WORK

Demolishing R.C.C. work including stacking of steel bars & disposal of unserviceable within 50 mts. lead.

Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.

Dismantling steelwork in built up sections in angles, tees, flats and channels including all gusset plates bolts, nuts, cutting dismembering and staking within 50 mts. lead

Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm.

Dismantling G.I. sheets roofing including ridges, hips valleys and gutters etc. and stacking the material within 50 meters lead.

MISCELLANEOUS

Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality, shape & size complete with CP brass screws and washers, Cleats, CP studs etc Complete.

Providing Pre-construction anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building.

Providing and fixing stainless steel (Grade 316)Matt finished railing / Fencing/benches/double pole hanging swinging type tilted cover dust bins made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.) as per drawing and technical specifications.

Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.

Providing and fixing in position MS grills for windows, ventillators made from MS sections like square bars, tubes, flats as per design and specifications with 1 coat of Zinc Chromate primer & 2 coats of synthetic enamel of required shade etc. complete.

Providing & Fixing Signage of SS 316 grade 3mm thick. Laser cutting, bending and provision for tubelight fitting and engraving with raised lettering using UV printing process. Installation using SS studs as directed by engineer incharge. etc. complete.

Painting (one or more coats) for Electrical works, Play euipments, Open air gym Equipments & Benches with synthetic enamel paint of approved brand and manufacture in all shades on old work to give an even shade once in a year for 5 years after completion during defect liability period.

Supplying 2 Labourers per day and maintaining the site and toilets work for 5 yrs after completion during defect liability period (payment will be made yearly after completion.)

PLAY AREA EQUIPMENTS

Supply and installtion of Stand Alone Spring Rider of different shapes made of G.I. pipe and G.I. spring ,fibre glass reinforced plastic of top polyester resin and virgin quality standard glass, rational moulded plastic made up of non ageing food grade and non toxic material with uv stabilizer and complete as per the instructions of Engineer incharge.

Supply and installation of Slides made of GI pipe and FRP galavanised steel pipes for center support,ladder and handrails, FRP sheet for slide and side arm made up of fiber reinforced plastic with reinforced platform height as per the and complete as per the instructions of Engineer incharge. (i) 5' height

(ii) 8' height wave slide

(iii) 12' height

Supply and installation of Double Post swing made of Galvanized steel pipes and rubber, dip molded swing chain of dia. 6mm, 1450mm long, rubber seat made by natural rubber with sufficient reinforcement and complete as per the instructions of Engineer incharge.

Supply and installation SEE SAW, lever made from 80nb gi pipe of 2950mm long with strong load carrying capacity, stand with special nylon-6 bush enclosed in a seamless pipe hinged to 50nb support pipe. seat is made from rotational moulded material seat with grip and complete as per the instructions of Engineer incharge. (i) single

(ii) double

Supply and installation Bar Climber of size 12'x2'x10', made of GI PIPE and complete as per the instructions of Engineer incharge.

Supply and installation of Rope Climber of size 6 x 4 x 6ft made of GALAVANISED STEEL PIPES AND Nylon rope complete as per the instructions of Engineer incharge.

Supply and fixing Benches of size 1.5 x 0.4 x 0.75m ht made of Cast Iron with T.W. Wooden strips and complete as per the instructions of Engineer incharge.

Supply and installtion of Double bar/Parallel bar of size1.8M x0.45mx1.37 ht made of 50mm C class G.I. pipe, PU painted and complete as per the instructions of Engineer incharge.

Supply and installtion of Roman Rings of size 1.06m length, 4.42m made of 50mm C class G.I. pipe painted,SS304 grade chain, with heavy duty bearing and complete as per the instructions of Engineer incharge.

Supply and installtion of Sky Walker single personof size1.06m0.38mx1.52m ht made of G.I. pipe painted, FRP foot rest with heavy duty bearing and complete as per the instructions of Engineer incharge.

Supply and installtion of Leg PressDouble Seater (squat pushing) of size1.8mx0.45mx1.8m ht made of G.I. pipe painted, FRP seat and foot rest,with heavy duty bearing and complete as per the instructions of Engineer incharge.

Supply and installtion of Single shoulder Wheel double person of size 0.91x0.3mx1.52m made of G.I. pipe painted, FRP seat and foot rest with heavy duty bearing and complete as per the instructions of Engineer incharge.

Supply and installtion of Seated chest Press Double person of size1.67mx0.68x2.13m made of G.I. pipe painted, FRP seat and foot rest with heavy duty bearing and complete as per the instructions of Engineer incharge.

Supply and installtion of Push Up bar of size0.91mx0.45m made of G.I. pipe and complete as per the instructions of Engineer incharge.

Supply and installtion of Exercise Bike of size0.76mx0.30mx1.20m made of G.I. pipe painted, FRP seat with heavy duty bearing and complete as per the instructions of Engineer incharge.

Rebate for taking all types of steel items including carting away, loading, unloading etc. Complete

Providing and fixing vitreous china Under Counter wash basin with RS or C.I. brackets painted white, 15 mm C.P. Jaquar make pillar tap, C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap, 32mm jaquar make Bottle trap and union complete, including cutting and making good the walls where required.

Proving and fixing white vitreous china water closet squating (European type w.c. pan) with white plastic seat and lid , C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) with fittings, rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls and floors where required.

Providing and fixing white vitreous china flat back Large lipped front urinal basin of 590x375x390mm size with Urinal Valve Auto closing system with built in control cock & wall flange with fittings, spreader, R.S. or C.I. brackets, standard size C.P. Brassl flush pipe and spreaders with C. P. brass unions & C. P. Brass clamps with waste fitting as per IS 2556, PVC trap with outlet grating and other couplings in CP Brass complete, including painting, fittings, cutting and making good the walls and floors where required. - Range of one urinal basin

Providing and fixing NICKEL chrome plated copper alloy Fancy 20mm nominal bore angular stop cock with sheet flance 20mm Jaquar make or equivalent. Confirming to IS 8931;1993

Supplying and fixing in position CP coat hooks (double horn hook) etc. complete as directed & to the satisfaction of Engineer-in-charge of work.

Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws (b) Plastic container

Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws

Providing and fixing two way long body bib cock with Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.

Making connection of G. I. Distribution branch with G. I. Main 50 mm to 80 mm nominal bore by providing and fixing tee including treading the pipe etc. complete

Supply and Fixing of Class B-Multi Jet Water meter 25mm Dia inferential, dry dial & stop cock in Pipe line including cutting & threading the pipe etc, suitable for horizontal installation, duly, sealed against tampering with couplings at both ends having pulse output facility compatable for automatic reading system ,conforming to IS:779-1974 and ISO 4064-2005 standards and bearing EEC/MID/OIML mark, (with latest Amendments)along with test certificate from FCRI/NABL as desired by the department complete.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. I - SCH-80(blue)/(white) (i) 20mm outer dia.

(ii) 25mm outer dia.

(iii) 40mm outer dia.

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer. External work. I - SCH-80(blue)/(white) (i) 20mm outer dia.

(ii) 25mm outer dia.

(iii) 40mm outer dia.

(iv) 50mm outer dia.

Providing & fixing 50 mm nominal dia G.I. pipes complete with G.I. fittings including trenching & re-filling etc. (external work).

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. (i) 15 mm dia nominal outer dia pipes.

(ii) 20 mm dia nominal outer dia pipes.

(iii) 25 mm dia nominal outer dia pipes.

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : (i) 20 mm nominal bore

(ii) 25 mm nominal bore .

(iii) 40 mm nominal bore

Providing and fixing non-return valve of approved quality : (a) 50 mm nominal bore

Providing and installing a set of 2 Hydro Pneumatic centrifugal pumps (1 working +1 stand by) with 2900 RPM Floor mounted minimum head shoud be 38m icluding suction and discharge manifold, anti vibration pad, NRV, Isolating valve, Pressure switch, dry run protection, control valve, auto change over, low level indicator, indivisual pump on off/ trip indicator, aoyo/ manual operation with pressure tank 100 ltr 10 bar complete as per the instruction of Engineer incharge.

Providing and placing Underground water storage tank rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996.

PLUMBING

Supplying & fixing 110 mm dia heavy duty, approved quality, P.V.C Nahani Trap with 75 mm dia outlet, fixing the trap in P.C.C (1:3:6), cutting floors or concrete surfaces, restoring the same to original condition including supplying & fixing 125 mm C.P grating of approved make etc. complete as directed & to the satisfaction of Engineer-in-charge of work.

Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed: i. 110 mm dia

ii. 75 mm dia

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including jointing of pipes & fittings with one step UPVC solvent cement, including chasing the walls and making good & testing of joints complete as per direction of Engineer. Internal work. I - SCH-80(blue)/(white) (a) 40mm outer dia.

Supplying, of HDPE pipes at store or site of work including loading unloading, stacking, transit insurance etc. complete bearing ISI mark & conforming to IS: 4984-1995 & made from PE 100 resin Class IV (10 kg/cm2) , Conveying carefully from stack at site, 250m from both sides rolling and lowering in trenches, laying true to line and level and perfect linking for joints for P.V.C / H.D.P.E, including fabricating /moulding HDPE pipe fittings/specials as per required Pressure class of HDPE Pipes,conforming to IS:8360 (Part I & III) and IS:8008(Part I to IX).The HDPE pipe fittings/specials shall be manufactured from virgin resin PE100, Jointing of HDPE pipes by heating the two ends of the pipe with electrically heated mirror, to the required temperature, including the hire charges of heating mirror and the generator set for the electricity for the heating mirror, Hydraulic testing of pipeline as per CLAUSE NO 6.4.4 of CPHEEO MANUAL on water supply and treatment, a to the required test pressusre by providing all work force,materials, reciprocating pump, pressure gauge, including the cost of water required, maintaining the test pressure for a period of 24 hours from the time the pipe line has attained the test pressure for successful testing, as per the standards, and maintaining the records of hydraulic test as required as per the direction of the engineer in -charge For HDPE pipeline etc complete as per the direction of the engineer in- charge. Outer dia. in mm Dia in mm (h) 160

Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with c.i. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design. Including excavation complete. 150 x 100 mm size –P or S type.

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement :5 fine sand) R.C.C. top slab with 1: 1 1/2:3 mix (1 cement: 1 1/2 coarse sand ;3 graded stone aggregate 20mm nominal size foundation concrete 1:1 1/2:3 mix (1 cemet ;1 1/2 coarse sand :8 graded stone agrregate 20mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design. (i) Inside size 90 x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg.)

(ii) Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg).

Extra for depth for manholes : a) size 90 x 80 cm

Making connection of drain or sewer line with existing manholes including braking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete: For pipe 100 to 150 mm dia.

Cutting the bituminous road for laying the pipeline in trenches for a width of 0.6m including labour , tools etc, and disposing the excavated excess material from the trench to a distance of 1000 metres, including making level the trench surface by utilising the serviciable material to the level of the top surface of road, by compacting, watering ramming with rolling with road roller after completion of laying of pipe and refilling the trenches etc. complete as per the direction of engineer incharge. By Manual Means : (a) District Road, State highways, National highway and roads of similar standards

Repairs and reinstatement to the road for trenches made by laying water supply pipeline, by removing the refilled material in the trench for the total depth of 0.42m and making good the road surface by providing laying rollling by road roller compacting for laterite soling 30cm thick, two layer of full grout of 50mm thick each, tack coat and open graded premix carpet of 20mm thickness as per specifications mentioned in item nos 14086, 14093, 14051 & 14068 of road GSR respectively, complete as per the direction of the engineer incharge. (a) District Road, State highway, National highway and roads of similar standards

PLUMBING

Providing and fixing chrome plated Nozel adapter complete with all accessories.

Supplying, of HDPE pipes at store or site of work including loading unloading, stacking, transit insurance etc. complete bearing ISI mark & conforming to IS: 4984-1995 & made from PE 100 resin Class IV (10 kg/cm2) , Conveying carefully from stack at site, 250m from both sides rolling and lowering in trenches, laying true to line and level and perfect linking for joints for P.V.C / H.D.P.E, including fabricating /moulding HDPE pipe fittings/specials as per required Pressure class of HDPE Pipes,conforming to IS:8360 (Part I & III) and IS:8008(Part I to IX).The HDPE pipe fittings/specials shall be manufactured from virgin resin PE100, Jointing of HDPE pipes by heating the two ends of the pipe with electrically heated mirror, to the required temperature, including the hire charges of heating mirror and the generator set for the electricity for the heating mirror, Hydraulic testing of pipeline as per CLAUSE NO 6.4.4 of CPHEEO MANUAL on water supply and treatment, a to the required test pressusre by providing all work force,materials, reciprocating pump, pressure gauge, including the cost of water required, maintaining the test pressure for a period of 24 hours from the time the pipe line has attained the test pressure for successful testing, as per the standards, and maintaining the records of hydraulic test as required as per the direction of the engineer in -charge For HDPE pipeline etc complete as per the direction of the engineer in- charge. Outer dia. in mm Dia in mm i. 50

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. I - SCH-80(blue)/(white) i. 20mm outer dia.

Providing and installing a set of 2 Monoblock water transfer pumps (1 working +1 stand by) 7.5 HP 3 Phase Floor mounted minimum head shoud be 42-53 m. Casing, impeller and motor body should be of cast iron icluding suction and discharge manifold, anti vibration pad, NRV, Isolating valve, Pressure switch, with automatic control panel , 2 nos float switch for dry run protection, control valve, auto change over, low level indicator, indivisual pump on off/ trip indicator, auto/ manual operation, overload protection pressure switch and timer operated, pressure gauge, bushes complete as per the instruction of Engineer incharge.

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality : i. 20 mm nominal bore

ii. 50 mm nominal bore .

iii. 65 mm nominal bore .

Providing and fixing non-return valve of approved quality : (i) 65mm nominal bore

LT Cables & Terminations

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 4 Core 16 sq.mm

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. 3 Core 4 sq.mm

Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (5) 4 x 16 Sq. mm.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (2) 3 x 4 Sq. mm.

Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (i) 3 Core 4 sq.mm

Supply of 3 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (a) 3 Core 4 sq.mm

Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. (i) 3 1/2 Core 95 sq.mm

(ii) 3 1/2 Core 50 sq.mm

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (i) (5) 3 1/2 x 95 Sq. mm.

(ii) (3) 3 1/2 x 50 Sq. mm.

Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm in the existing masonry open duct, etc. complete as required

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface, etc. complete as required

Laying of one number PVC insulated and PVCsheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick ,protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. (a) In soily strata

Supplying & laying (including excavation) 15 cm dia RCC Hume pipe with coupling collar of standard thickness at required depth up to 90 cm below road / ground surface, for enclosing provided cable & necessary back filling with light ramming to make the road/ground surface as it was (Except bitumen carpet).

FEEDER PANELS

Feeder Panel MFP Supply,installation,testing and commissioning of outdoor type feeder Panel as specified and complete with : a) Tinned copper busbars b) 7 tank pre-treatment c) Oven baked epoxy paint finish - RAL 7032 INCOMMER 125A TP MCCB OUTGOING 63A TP MCB-2 NOS 40A TP MCB-5 NOS 20A TP MCB-10 NOS

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/lifting arrangement and watering pipe etc. (but without charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. c)Watering GI pipe, 20 mm Class B, with funnel as per specs. d) Charcoal/salt as per specs ( paid seperately). e) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. g)watering arrangement(plumbing will be paid seperately). (a) In soily strata

Extra for using salt and charcoal for GI or copper plate earth electrode as required( 96 Kgs of Charcoal and 5 Kgs of Salt)

Providing and fixing 25 mm x 5 mm copper strip on surface r in recess for coneections etc. as required

Supplying and laying 25 mm x 6 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required

Supplying & erecting FRP box of size 150 x 125 x 100 mm, 2.7 mm thick complete on pole/wall as per specification no. CB-SB

Supplying and erecting highbay LED fitting IP 65 with lamp 70W-80W, PF >0.95 duly connected complete with accessories as per specification no. FG-ODF/LED

Supplying and erecting bulkhead fitting suitable for upto LED upto 12W fixed on wall. As per specification no. FG-IDF/BHF

Supplying and fixing brass batten/ angle holder including connections etc as required.

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.luminaire by disconnecting starter & ballast if necessary.

Supply and erecting of 9 inch (225 mm sweep) exhaust fan with double ball bearing, 1400 rpm, complete with all accessories. (a) Cat A

Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/ wooden block including connections etc as required.

Supply and erecting of 48 inch ( 1200mm sweep) ceiling fan, double ball bearing type, , complete with all accessories. (b) Cat B

Supplying and erecting LED street light fitting suitable for 60W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete as per specification No FG-ODF/FLS-2.

Providing & erecting 4 m high galvanised conical pole with foundation bolts having bottom dia. from 115 to 130 mm, top dia. from 65 to 75 mm on provided foundation as per specification no. OH-PL/CPL

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Providing & erecting 3 m high galvanised conical pole with foundation bolts having bottom dia. from 105 to 115 mm, top dia. from 65 to 75 mm on provided foundation as per specification no. OH-PL/CPL

Providing & erecting 6 m high galvanised conical pole with foundation bolts having bottom dia. from 135 to 160 mm, top dia. from 65 to 75 mm on provided foundation as per specification no. OH-PL/CPL.

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole).

Supply, Installation, Testing & Commissioning of 30W-40W LED Decorative Post Top luminaire, 40W LED Decorative Post Top luminaire with a classic form providing an indirect lightingwhich emits a pleasant, low glare light for either symmetric or asymmetric light distribution.Confirming to IEC Safety Standard (IEC60598, IEC61347) • Luminaire body of cast aluminium, canopies of corrosion-resistant aluminium painted white and a diffuser of highly impact-resistant clear PMMA (IK06) fixed on to the body, • IP66 ROHS • Providing an indirect lighting, it emits a pleasant, low glare light, making it the perfect luminaire for visual comfort in outdoor environments. • Chip on Board (COB) LED along with reflector present in Luminaire to generate,uniform light distribution. • Operating temperature range -10°C to 50°C • Operating Voltage Range: 180-240 Vac , Power Factor ≥ 0.95 Surge Protection Device: Standard 10kV and optional 20kV SPD • Electrical class l • Options of reflector available to generate symmetric or asymmetric light intensity distribution. • Suitable for a Vertical mounting of 48mm diameter. • Ingress Protection: IP66 • Impact resistance: IK06 • Overall system efficiency of 70lm/W at correlated colour temperature (CCT) of 4000K • colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. • BIS certified potted driver having internal surge protection of 4/4 kV inclusive of all connectors accessories complete with mountings

Supplying and Installing following size perforated type 16 SWG, M.S.cable tray of GI pregalvanised/hot dip galvanised/ powder coated finish, in convenient sections, joined with connectors, suspended from the ceiling with suitable MS suspenders including bolts and nuts, painting suspenders etc, complete as required. (c) 200mm width x 50mm depth (16 SWG)

Supplying and erecting UPVC reinforced flexible conduit 50mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C -- with Cat B Modular Accessories

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (b) Cat B

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required. (b) Cat B

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc as required. (b) Cat B

Supply and erecting fan hook box ( 100 mm diameter or equivalent square size, 75mm deep) fabricated out of 16 SWG sheet steel with 10 m round bar hook bounded to RCC steel upto 50 mm length protruding on each side of the box, including painting with 2 coats of red oxide, complete as required

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(medium) of appropriate size as required. (a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit)

(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit)

(c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit)

(d) 2 x 6 sq.mm + 1 x 6 sq.mm earthwire (25mm Conduit)

(k) 4 x 6 sq.mm + 2 x 6 sq.mm earthwire (32mm Conduit)

DBs, MCBs, RCCBs etc.

Supply and erecting meter box suitable for three phase energy meter and incoming SP/DP MCB, fabricated out of 16 SWG sheet steel, powder coated, complete as required and conforming to the requirements of Goa Electricity Deaprtment.

Supply and erecting meter box suitable for single phase energy meter and incoming SP/DP MCB, fabricated out of 16 SWG sheet steel, powder coated, complete as required and conforming to the requirements of Goa Electricity Deaprtment.

Supply, installation, testing and commissioning of electronic type single phase energy meter (KWh), ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only. (b) 10 to 40 A

Supply, installation, testing and commissioning of electronic type three phase energy meter (KWh), 4 wire, ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only. (b) 10 to 40 A

Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (a) 8 way double door Cat B

(b) 16 way double door Cat B

Supplying and fixing following way TPN sheet steel, double door, Horizontal type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (d) 8 way (8+24), double door, Horizontal type Cat A

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (i) SP, Cat B

(ii) DP, Cat B

Supplying and fixing 40 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (i) TP, Cat B

Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required (i) 25 A, Cat B

(ii) 40 A, Cat B

Supplying and fixing SP blanking plate in the existing MCB DB complete as required

BAGKIYA CONSTRUCTIONS PVT LTD