Spl repair/replacement of water supply pipeline to MES IB and SASF under AGE(E/M) at Faridkot Mil Stn

Amount

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation/pipe lines etc and getting out in soft/loose soil complete all as specified and directed .

Returning, filling in including spreading, leveling, watering & and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed .

Removing excavated material to a distance n.exc 50 m & depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed .

Taking up or down GI water tubing of bore 15mm including all fittings complete all as specified and directed .

Taking up or down GI water tubing of bore 20mm including all fittings complete all as specified and directed .

Taking up or down GI water tubing of bore 25mm including all fittings complete all as specified and directed .

Taking up or down GI water tubing of bore 40mm including all fittings complete all as specified and directed .

Taking up or down GI water tubing of bore 50mm including all fittings complete all as specified and directed .

M&L for Steel water tubing of 15 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .

M&L for Steel water tubing of 20 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed.

M&L for Steel water tubing of 25 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .

M&L for Steel water tubing of 40 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed.

M& L for Steel water tubing of 50 mm bore, medium grade, galvanised, with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .

Dismantling existing lead joint of 80 mm bore pipe and providing new run lead joint complete all as specified and directed .

Dismantling existing lead joint of 100 mm bore pipe and providing new run lead joint complete all as specified and directed .

Dismantling existing lead joint of 150 mm bore pipe and providing new run lead joint complete all as specified and directed .

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed for 15 mm dia of pipe complete all as specified and directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed for 20 mm dia of pipe complete all as specified and directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed for 25 mm dia of pipe complete all as specified and directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed for 40 mm dia of pipe complete all as specified and directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed for 50 mm dia of pipe complete all as specified and directed.

S&F in repair 80 mm bore, cast iron, air release valve, flanged type with two air out lets including jointing with nuts, bolts, washers and rubber sheet etc complete all as specified and directed

S&F in repair 100 mm bore, cast iron, air release valve, flanged type with two air out lets including jointing with nuts, bolts, washers and rubber sheet etc complete all as specified and directed

S&F in repair 200 mm bore, cast iron, air release valve, flanged type with two air out lets including jointing with nuts, bolts, washers and rubber sheet etc complete all as specified and directed

Supply and laying cast iron pipes of 80mm bore with spigot and socket ends, centrifugally cast, class LA ,laid in trenches including taking out the existing one of any size with fittings complete all as specified and directed.

Supply, laying, jointing, commissioning and testing ductile iron pressure pipes (conforming to IS-8329-2000) of 80mm bore with spigot and socket ends , suitable for 'Push-on-joints' in standard working lengths supplied with a rubber gasket (tyton joint) class K-7 with socket & cement mortar lining inside and metallic zinc coating with finishing layer of bituminous paint on outside the pipe, laid in trenches including taking out the existing one with fittings complete all as specified and directed.

Supply, laying, jointing, commissioning and testing ductile iron pressure pipes (conforming to IS-8329-2000) of 100mm bore with spigot and socket ends , suitable for 'Push-on-joints' in standard working lengths supplied with a rubber gasket (tyton joint) class K-7 with socket & cement mortar lining inside and metallic zinc coating with finishing layer of bituminous paint on outside the pipe, laid in trenches including taking out the existing one with fittings complete all as specified and directed.

Supply, laying, jointing, commissioning and testing ductile iron pressure pipes (conforming to IS-8329-2000) of 150mm bore with spigot and socket ends , suitable for 'Push-on-joints' in standard working lengths supplied with a rubber gasket (tyton joint) class K-7 with socket & cement mortar lining inside and metallic zinc coating with finishing layer of bituminous paint on outside the pipe, laid in trenches including taking out the existing one with fittings complete all as specified and directed.

S&F in replacement of cast iron sluice valve of size 200mm,class PN-1.6 ( ISI marked) with gun metal spindle, flanged both end,cast iron gate with brass ring and iron wheel handle including jointing with Neoprene rubber gasket, nuts, bolts and washers etc complete suitable for CI/DI pipes all as specified & directed .

S&F in replacement of cast iron sluice valve of size 150mm,class PN-1.6 ( ISI marked) with gun metal spindle, flanged both end,cast iron gate with brass ring and iron wheel handle including jointing with Neoprene rubber gasket, nuts, bolts and washers etc complete suitable for CI/DI pipes all as specified & directed .

S&F in replacement of cast iron sluice valve of size 100mm,class PN-1.6 ( ISI marked) with gun metal spindle, flanged both end,cast iron gate with brass ring and iron wheel handle including jointing with Neoprene rubber gasket, nuts, bolts and washers etc complete suitable for CI/DI pipes all as specified & directed .

S&F in replacement of cast iron sluice valve of size 80mm,class PN-1.6 ( ISI marked) with gun metal spindle, flanged both end,cast iron gate with brass ring and iron wheel handle including jointing with Neoprene rubber gasket, nuts, bolts and washers etc complete suitable for CI/DI pipes all as specified & directed .

M&L for cutting existing pipes of bore of 300 mm for making connection to 200mm dia DI pipe including provision of CI Tee (02Nos), collars (02 Nos) ,Joints (02Nos) etc complete all as specified and directed .

M&L for cutting existing pipes of bore up[to 300 mm for making connection to 100mm dia DI pipe including provision of CI Tee (02Nos), collars (02 Nos) ,Joints (02Nos) etc complete all as specified and directed .

M&L for CI fittings for spigot & socketed pipes of bore upto 500 mm i.e bends, tapers, tee pieces ,caps & plugs etc complete all as specified and directed .

M&L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in coping ,bed plates,kerbs and likes including weathering, slightly rounded or chamfered angle and throating, necessary form work and fair finishing all exposed faces of concrete without using extra cement complete all as specified and directed

Dismantling existing mild steel sheet cover of any thickness from existing valve pit and providing new cover of 3.15mm thick mild steel sheet with locking arrangement, butt hinges, handles and other connected items including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supplying and fixing mild steel framed work for water tanks/valve pits, made out of angle iron of size 40x40x5mm, fabricated from structural steel sections including nuts, bolts, washers, welding, binding cold or hot, drilling holes for bolts, in any shape or size as indicated or directed including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M & L for construction of Valve pit of size 1050mmX1050mmX1050mm (internal dimensions) (Type-B) with brick masonry construction including necessary excavation and earth work in soft/loose soil, brick work in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4, three coats of white wash, PCC coping in 1:2:4 Type B-1, MS frame made out of angle iron of size 40mmx40mmx6 mm, MS sheet cover of 1.6 mm thick fixed to angle iron frame by means of hinges, welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock , complete all as specified and directed.

M & L for construction of Valve pit of size 900mmX900mmX900mm (internal dimensions) (Type-B) with brick masonry construction including necessary excavation and earth work in soft/loose soil, brick work in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4, three coats of white wash, PCC coping in 1:2:4 Type B-1, MS frame made out of angle iron of size 40mmx40mmx6 mm, MS sheet cover of 1.6 mm thick fixed to angle iron frame by means of hinges, welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock , complete all as specified and directed.

M & L for construction of Valve pit of size 450mmX450mmX450mm (internal dimensions) (Type-B) with brick masonry construction including necessary excavation and earth work in soft/loose soil, brick work in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4, three coats of white wash, PCC coping in 1:2:4 Type B-1, MS frame made out of angle iron of size 40mmx40mmx6 mm, MS sheet cover of 1.6 mm thick fixed to angle iron frame by means of hinges, welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock , complete all as specified and directed.

Supply, installation, testing and commissioning Electromagentic Type Flow Meter (Rubber Lining, Remote Display) size 300mm complete all as specified & directed with following parameters:- (i) Transmitter : Die Cast Aluminium IP66. (ii) Power Supply : 90-265 VAC. (iii) Outputs : RS 485 MODBUS. (iv) Sensor Terminal Housing : SS 304 C.S Fabricated IP65. (v) Display : Graphic Display. (vi) Flange : ASA # 150 C.S. (vii) Electrode : SS316L. (viii) Grounding Electrode : SS316L. (ix) Flow Tube : SS304. (x) Coil Housing : C.S (xi) Protection Class : IP-66 (xii) 1 Year Warranty with Calibration Certificate

Supply, installation, testing and commissioning Electromagentic Type Flow Meter (Rubber Lining, Remote Display) size 500 mm complete all as specified & directed with following parameters:- (i) Transmitter : Die Cast Aluminium IP66. (ii) Power Supply : 90-265 VAC. (iii) Outputs : RS 485 MODBUS. (iv) Sensor Terminal Housing : SS 304 C.S Fabricated IP65. (v) Display : Graphic Display. (vi) Flange : ASA # 150 C.S. (vii) Electrode : SS316L. (viii) Grounding Electrode : SS316L. (ix) Flow Tube : SS304. (x) Coil Housing : C.S (xi) Protection Class : IP-66 (xii) 1 Year Warranty with Calibration Certificatee

Cutting existing DI line of size 500 mm bore and inserting Electromagnetic flow meter with all fitting i.e Tee,Coller, Tail piece, run lead joint and flange work, including necessary earth work and bailing out water complete all as specified and directed. Note :- Electromagnetic flow meter/DI fitting shall be measured & paid under respective tiems.

Cutting existing DI line of size 300 mm bore and inserting Electromagnetic flow meter with all fitting i.e Tee,Coller, Tail piece, run lead joint and flange work, including necessary earth work and bailing out water complete all as specified and directed. Note :- Electromagnetic flow meter/DI fitting shall be measured & paid under respective tiems. Note :- A Sum of Rs. 1,80,950.00 will be deducted on account of credit for dismantling/demolished/taking down material. Please refer detail on srl page No 19 (Schedule of credit) of Tender Documents.

NAV DURGA CONSTRUCTION CO

DEEPAK ENTERPRISES