RHEP-TCN No.-09-2026-27

Dismantling and removing 2.5 cm thick artificaial stone flooring including stacking the useful materials for reuse and removing the debris away from work site with all leads and lifts as per direction of Engineer-in-charge.

Removing of cement plaster from walls including racking out joint to 12 mm deep and removing the debris away from work site with all leads and lifts as per direction of Engineer-in-charge.

Dismantling brick or stone masonry in lime or cement mortar under 3 mtr height including stacking the useful materials for reuse and removing the debris within 50mtr lead as per the direction of the Engineer-in-charge.

Earth work excavation for plinth & foundation in hard soil or gravelly soil within 50 mtrs. initial lead and 1.5 mtrs.initial lift including rough dressing and breaking clods to maximum 5cm to 7cm laying in layers not exceeding 0.30 mtrs in depth as per direction of Engineer-in-charge.

Supply & filling in foundation and plinth with sand watered and rammed including the cost, conveyance, royalty and labour charges etc. complete.

Cement concrete (1:3:6) with 4cm size hard granite metal including the cost, conveyance, royalty and labour charges etc.Complete.

Cement concrete (1:2:4) with 12mm size hard granite chips including the cost, conveyance, royalty and labour charges etc.Complete.

Fly Ash brick masonry in cement mortar (1:4) using fly ash brick having crushing strength not less than 75 Kg/Cm2 with dimensional tolerance of +/- 8% after immersing the bricks in water for six hours before using foundation and plinth including hoisting, placing in position, watering, curing to required time etc. including cost, converyance, royalties and cost of all labour with T & P required for the work etc. complete as per direction of Engineer-in-charge.

R.C.C. work of ( 1:1.5:3) with 12 mm & down grade black hard granite chips( crusher broken) including hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surface smooth, providing grooves or beds where necessary including cost of all materials (excluding cost of tor steel) and cost of all labour with T & P required as per direction of Engineer-in-charge.

Supplying, cutting, bending, binding and laying the grill of approved dia and placing in position of tor steel (Fe-500) for R.C.C. works and using binding wire 18 to 20 gauge including cost, conveyance and labour complete as per direction of Engineer-in-charge.