CERTAIN REPAIR TO JCOs ORs MD ACCN UNDER AGE B R I AT AMRITSAR CANTT

Amount

Dismantling Brick tiles or terracing tiles, single layer on roofs, removal etc complete all as specified and as directed.

Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof), removal etc complete all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided, removal etc complete all as specified and as directed.

Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in padding concrete fair finish, roof kerbs or mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating; Complete all as specified and as directed.

Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including bitumen primer, cleaning surfaces etc ; Complete all as specified and as directed.

Supply and Fixing (minimum) 3mm thick APP film based polymeric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms as per manufacturers instructions, complete all as specified and as directed.

Material and Labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:4 and joints grouted and pointed flush in cement mortar 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and as directed.

All as per Srl Item 7.00 here-in-before but except brick tiles. Note:-Old serviceable tiles obtained from dismantling shall be reused. ; Complete all as specified and as directed.

Raking out joints/ pointing to brick work or brick tiles, laid flat, in floors, surface channels, roofs, etc built in cement mortar. ; Complete all as specified and as directed.

Material and Labour for flush pointing to bricks laid flat or brick tiles in pavings in Cement mortar 1:3 with waterproofing compound. Note:- WPC shall be measured and paid separately ; Complete all as specified and as directed.

Supply only liquid waterproofing compound. ; Complete all as specified and as directed.

Material and labour for factory made Box type steel window, ERW hollow P-Section size 60 mm x 25 mm, double rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one No openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars etc as given below all as shown on drg No CEJZ/TD-1020/08 SH 1/3 to 3/3 dated 01 may 2008 as per existing size including a shop coat of red oxide primer, complete all as specified and directed as follows:- (a) Hold fast 150mm long of MS flat 12mm x 3mm - 4 Nos per Window (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf (c) MS tower bolt 150mm long - 02 Nos per leaf (d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf (e) Cleat 55mm long of hollow square 15mm, 0.63mm thick- 01 Nos per leaf (f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf (g) MS guard bar 10mm square bars @ 10cm c/c fixed horizontly (h) 3mm thick clear glass sheet 3 Nos per leaf glazing with oil putty (i) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in each leaf Note :- Including taking down old steel / wooden window including hold fast PCC 1:2:4 type B0 (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finish complete all as specified and directed by Engineer-in-charge. Painting shall be measured and paid separately.

Material and labour for factory made Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD-1019/08 dt 01.05.08 as per existing size including a shop coat of red oxide primerincuding cutting holes complete all as specified and directed as follows. (a) 3mm thick pin headed type glass sheet glazing with oil putty and Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesof appropriate size. Note:- Including taking down old steel / wooden window including hold fast PCC 1:2:4 type B0 (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finish complete all as specified and directed by Engineer-in-charge. Painting shall be measured and paid separately.

Demolition of Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles. ; Complete all as specified and as directed.

Material and Labour for brick with sub class B brick built in cement mortar 1:6 ; Complete all as specified and as directed.

All as per Srl Item 15.00 here-in-before but except brick . Note:-Old serviceable Bricks obtained from demolition shall be reused ; Complete all as specified and as directed.

Taking down cement or cement lime plaster on brick walls etc include complete backing coat of plaster of any thickness. joints, hacking for key, scrubbing down with water complete all as specified and directed ; Complete all as specified and as directed.

Material and Labour for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface and finished even and smooth without using extra cement and applying two coats of oil bound distemper over and incl one coat of alkali resistant primer including wall care putty ; Complete all as specified and as directed.

Material and Labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface and finished fair and even without using extra cement and applying two coats of cement base paint on newly plastered surfaces of wall ; Complete all as specified and as directed.

Material and Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3. finishing even and smooth without using extra cement and apply three coats of white wash on ceiling including preparation of new plaster surfaces ; Complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (incl backing) coat of plaster of any thickness, removing serviceable tiles to store and rubbish off the premises ; Complete all as specified and as directed.

Material and Labour glazed ceramic coloured wall tiles 450x300x 6 to 7mm thick on vertical surfaces such as skirting and dados etc shade as approved by Engr-in-Charge set and jointed in neat cement slurry and pointed in coloured cement to match over & including 10mm thick rendering in Cement mortar 1:4 ; Complete all as specified and as directed.

Material and Labour for Non skid ceramic coloured tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc shade as approved by Engr-in-Charge set and jounted in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in Cement mortar 1:6. ; Complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar ; Complete all as specified and as directed.

Material and Labour for Granite (of any type) work (table rubbed and polished) 20mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4. ; Complete all as specified and as directed.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; Complete all as specified and as directed.

Material and Labour for 50mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in flooring Finishing fair and even without using extra cement. ; Complete all as specified and as directed.

Taking down chowkhat with shuttering (without taking off shutters from frame including grill & guard bars) size of shutter not exceeding 1.5 sqm each ; Complete all as specified and as directed.

Taking down chowkhat with shutters without taking off shutters from frame size of shutters exc. 1.5 but not exceed 4 Sqm each ; Complete all as specified and as directed.

Taking down shutters of any description size of shutter not exc 1 sqm each ; Complete all as specified and as directed.

Taking down shutters of any description size of shutter exc 1 sqm but n.exc 2 sqm. ; Complete all as specified and as directed.

Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening all as specified and directed after easing and adjustment. ; Complete all as specified and as directed.

Material and Labour fixed in repairs 18/19mm thick Prelaminated HDHMR board, interior grade, with decorative choice lamination both side, fixed with screws as in shelves/Shutters ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing Continuous (piano) hinges, Width of flaps (when open) in 40 mm mild steel, bright finish or electro galvanised ; Complete all as specified and as directed.

Supply and Fixing factory made 35mm thick IInd class hardwood Glazed and skeleton door shutters , open rebated and prepared to receive glass, gauze, etc. divided in to quares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkhats including a shop coat of pink primer ; Complete all as specified and as directed.

Supply and Fixing pressed steel factory made frame for doors with one or two rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate including a PCC filing type B-0 and a coat of red oxide primer ; Complete all as specified and as directed.

Supply and Fixing factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels incluidng a coat of pink primer ; Complete all as specified and as directed.

Supply and Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M S square tube, suppling & fixing in opening as per specification & drawing ; Complete all as specified and as directed.

Supply and Fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Supply and Fixing Aluminium handles 150mm long, cast type anodised ; Complete all as specified and as directed.

Supply and FixingAluminium anodised barrel tower bolt 150mm long ; Complete all as specified and as directed.

Supply and Fixing 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast or extruded sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed ; Complete all as specified and as directed.

Supply and Fixing butt hinges medium weight cold rolled stainless steel complete size 100mm ; Complete all as specified and as directed.

Supply and Fixing MS 300mm long ordinary Helical mild steel stove enameled black door springs including rollers and roller plate ; Complete all as specified and as directed.

Supply and Fixing 100mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws ; Complete all as specified and as directed.

Supply and Fixing stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples ; Complete all as specified and as directed.

Hacking out old brocken glass ( any thickness , size , quality or description ) from wooden/metal frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads ; Complete all as specified and as directed.

Supply and Fixing 3mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beading in square n exc 0.5 sq.m. in each pane ; Complete all as specified and as directed.

Supply and Fixing 3mm thick figured glass pin head type, ordinary quality and glazing with oil putty/wooden beading in square n exc 0.5 sq.m. in each pane ; Complete all as specified and as directed.

Material and Labour for preparation of undecorated wooden surfaces of any description , not otherwise described , over 10 cm width or girth and applying two coats of synthetic enamel paint ; Complete all as specified and as directed.

Material and Labour two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of previously untreated surfaces ; Complete all as specified and as directed.

Supply and Fixing 75 to 80 mm long brass handle complete all as specified and as directed.

Dismantling water tanks and Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore. ; Complete all as specified and as directed.

Dismantling water tanks and Supply & Fixing rotational moulded polythene water storage tanks of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore. ; Complete all as specified and as directed.

Disconnecting existing tanks 1000ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, including all fitting ; Complete all as specified and as directed.

Disconnecting existing tanks 500ltr capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, including all fitting ; Complete all as specified and as directed.

Taking up or down 15mm bore steel tubing and connections , including cleaning for re-fixing or removal of store including necessary cuttings chases and making good cement mortar 1:3 ; Complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections , including cleaning for re-fixing or removal of store ncluding necessary cuttings chases and making good cement mortar 1:3 ; Complete all as specified and as directed.

Supply and Fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors ; Complete all as specified and as directed.

Supply and Fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors ; Complete all as specified and as directed.

Refixing 15mm old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.). Note:- old serviceable GI tubing obtained from taking down will be reused after necessary cleaning and with all new fittings ; Complete all as specified and as directed.

Refixing 20mm old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.). Note:- old serviceable GI tubing obtained from taking down will be reused after necessary cleaning and with all new fittings. ; Complete all as specified and as directed.

Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories ; Complete all as specified and as directed.

Supply and Fixing 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings ; Complete all as specified and as directed.

Supply and Fixing 75mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings ; Complete all as specified and as directed.

Supply and Fixing 110mm bore PVC (SWR) bends any radius . ; Complete all as specified and as directed.

Supply and Fixing 110mm PVC (SWR) junction single, (Single T) equal or unequal ; Complete all as specified and as directed.

Supply and Fixing 75mm bore PVC (SWR) bends any radius ; Complete all as specified and as directed.

Supply and Fixing in repairs vitreous china squatting pan of Orissa pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including making good the dismantled portion to match with existing surface of floor ; Complete all as specified and as directed.

Supply and Fixing in repairs 10 ltrs capacity PVC valveless syphonic action flushing cistern low level with inlet ball valve, flush pipe of polythelene of low or high density or PVC 32mm dia ; Complete all as specified and as directed.

Supply and Fixing in repairs vitreous china wash hand basin white with flat back type size 550x400mm excluding taps chain and plug and porcelain stopper but including brackets CP waste coupling 32mm and PVC waste pipe 32mm dia including cutting for and pinning ends of brackerts ; Complete all as specified and as directed.

Supply and Fixing in repairs Brass Chromium plated Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges ; Complete all as specified and as directed.

Supply and Fixing in repairs pillar taps 15mm dia cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes. ; Complete all as specified and as directed.

Supply and Fixing in repairs PVC waste pipe32mm dia suitable for WHB/Sink ; Complete all as specified and as directed.

Supply and Fixing in repair brass chromium plated soap dish fixed with screws to walls ; Complete all as specified and as directed.

Supply and Fixing in repairs CP shower rose fancy type with CP arm complete all as specified and directed. Make: CERA/Jaquar/Somany/Parryware

Supply and Fixing in repairs stop valves brass chromium plated 15mm dia with long shank and cup concealed type. ; Complete all as specified and as directed.

Supply and Fixing in repairs centre hole wall/ wash basin/ sink mixture cast copper alloy chromium plated with capston head srewed down high pressure with lettered hot or cold with long screwed shanks fly nut screwed for iron pipe 15mm dia ; Complete all as specified and as directed.

Supply and Fixing in repairs chromium plated stop valve /Angle valve15mm bore fancy type screwed down for high pressure ; Complete all as specified and as directed.

Supply and Fixing in repairs PVC connection pipe 15mm dia 600mm long with brass check nut at both ends ; Complete all as specified and as directed.

Supply and Fixing in repairs CP bib tap 15mm dia long body screw high pressure for iron pipe ; Complete all as specified and as directed.

Supply and Fixing in repairs CP bib tap 15mm dia fancy type with crutch or butterfly handles,screwed down, screwed for iron pipe or for brass ferrule high pressure ; Complete all as specified and as directed.

Supply and Fixing in repair 100mm dia CP grating with or without hinge type or hole type ; Complete all as specified and as directed.

Supply and Fixing in repairs 25mm dia stainless steel Curtain rods/ rails with Brass brackets, stops, rollers, finials, 1 pair of Brass decorative knobs for each curtain rod etc. ; Complete all as specified and as directed.

Supply and Fixing in repair wall mounted PVC bathrrom Mirror Cabinet,Size 21x13 inch ; Complete all as specified and as directed.

Material and Labour for repairng of chajja / roof projection by taking down old plaster applying 10 mm thick rendering in cement mortar 1:3 including providing chicken mesh wire netting 25, gauge, 20 mm mesh, finishing the surface even & smooth with out using extra cement ; Complete all as specified and as directed.

Removal of plants / vegetation growth etc of height exc 30 cm but not exc 45 cm from roof or parapet of building including removing of root and making good disturbed surface with cement mortar 1:3 including supply & mixing of liquid water proofing compound as per manufacturer instruction ; Complete all as specified and as directed.

Supply and fixing repair vitreous China wash down water closet pan pedestal pattern white including fixing bolts incl white seat cover with flat bottom and cover and mild steel chromium plates hinging device (excluding flushing cistern and flush pipe).

Supply and fixing in reapirs 10 Ltrs capacity PVC valve less symphonic action flsuhing cistern low level with inlet ball valve, flush pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified and directed. Make : CERA/Jaguar, Somany/Parryware

Supply and fixing in reapirs plastic water closet seat cover white with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and direted

E/M PORTION Taking down copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (creit for above items shall be made as per condtitions separately) and making good disturbed surface of walls, floors, etc ; Complete all as specified and directed.

Material and Labour for point wiring in existing concealed conduit for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using cement mortar (1:3) ; Complete all as specified and directed. For one light /fan/ buzzer point controlled by one 5 Amp switch one way Note : 1. Switch/socket/regulator/ceiling rose/lamp holder/bell shall be measured and paid separately

Material and Labour for point wiring in existing concealed conduit for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using cement mortar (1:3) ; Complete all as specified and directed. For one three pin socket outlet 5 Amps independent board complete Note : 1. Switch/socket/regulator/ceiling rose/lamp holder/bell shall be measured and paid separately

Material and Labour for point wiring in existing concealed conduit for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using CM (1:3) including fixing of switch/socket/regulator/ etc ; Complete all as specified and directed. For one three pin 5 Amps socket outlet on the same board with other switches Note : 1. Switch/socket/regulator/ceiling rose/lamp holder/bell shall be measured and paid separately

Material and Labour for point wiring in existing concealed conduit for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn through and existing PVC concealed/conduit with all fittings and accessories including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using cement mortar (1:3) ; Complete all as specified and directed. For one Light point controlled by two way switch Note : 1. Switch/socket/regulator/ceiling rose/lamp holder/bell shall be measured and paid separately

All a per item No 90 here-in-above but with 2.5 Sq mm size cable multi stranded FRLS copper wire unsheathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper multi stranded conductor connecting to common earth dolly ; Complete all as specified and directed.

Material and Labour for surface point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using cement mortar (1:3) ; Complete all as specified and directed. a) For one light /fan/ buzzer point controlled by one 5 Amp switch one way Note : 1. Switch/socket/regulator/ceiling rose/lamp holder/bell shall be measured and paid separately

Material and Labour for surface point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using cement mortar (1:3) ; Complete all as specified and directed. a) For one three pin socket outlet 5 Amps independent board complete Note : 1. Switch/socket/regulator/ceiling rose/lamp holder/bell shall be measured and paid separately

Material and Labour for surface point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using cement mortar (1:3) ; Complete all as specified and directed. a) For one three pin 5 Amps socket outlet on the same board with other switches Note : 1. Switch/socket/regulator/ceiling rose/lamp holder/bell shall be measured and paid separately

Material and Labour for surface point wiring for one light point/fan point/bell point controlled by one switch ( using red,black,green colour wires as colour codings) complete with 1.5 sqmm ( nominal cross section area ) single core FRLS PVC insulated unsheathed and multi stranded copper conductor cable 1100 volt ( ISI marked ) drawn and including surface PVC conduit with all fittings and accessories i.e. pipe bend,pipe hook, elbow,juction boxes etc including pressed steel powder coated sunken terminal box suitable for Modular switch socket ( min 50mm deep and 1.6 mm thick sheet ,suitable size ) concealed in wall , including inner and outer plates ( cover plate ) suitable for fixing the modular switches/sockets/regulator etc including provn of 1.5 sqmm single core FRLS PVC insulated multi stranded copper conductor wire continues as earth wire connected to earth dolly etc including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floorsetc by using cement mortar (1:3) ; Complete all as specified and directed. a) For one light point controlled by two way switch Note : 1. Switch/socket/regulator/ceiling rose/lamp holder/bell shall be measured and paid separately

All a per item No 95 eathed for one 3 pin socket outlet 15 Amps on independent board including continuous earth wire of PVC insulated 2.5 Sq mm copper solid conductor connecting to common earth dolly ; Complete all as specified and directed.

Supply and Fixing Modular switch flush type one way 6 Amp, 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and Fixing Modular switch flush type two way 6 Amp, 230 volts complete all as specified and directed by Engr-in-Charge.

Supply and Fixing Modular socket 6 Amp 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

Supply and Fixing Modular switch flush type one way 16 Amp, 230 volts complete all as specified and directed by Engr-in-Charge

Supply and Fixing Modular socket 6 /16 Amp 2/3 pin combined 2 module complete all as specified and directed by Engr-in-Charge.

Supply and Fixing Modular switch bell push swiwch 6 Amp 1 module complete all as specified and directed by Engr-in-Charge.

Supply and fixing ceiling rose 65X50 mm three terminals ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing Lamp holder bakellite type with black plate suitable for batten fitting complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repairs of Ding Dong bell AC 230 Volts ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing Modular stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd heavy duty 230 volts ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs for vertical sheet steel metal enclouser distribution boards, double door factory made 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper wire of suitable size from the MCCB to the out going circuits one incoming MCCB and suitable outgoing MCBs circuits comprising of 3 phase 4 wire of suitable rating complete all as spcd and directed with the following accessories. (a) MCCB 100 amps, 25 KA, TP, 415 volts, 50 Hz = 01 No. ; Complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 8 ways including necess ; Complete all as specified and directed by Engineer-in-charge.complete all as specified.

Supply and fixing in repairs sheet metal enlosure DBs double door factory made flush fixed complete with 200 amps rated bus-bar 240 volts single phase 12 ways including necessary brick work and plaster to match with the existing surface ; Complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs MCB single pole 6 to 32 Amps ; Complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs MCB DP 40 Amps 240V, 10 KA, ; Complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs 40 to 63 Amps MCB TPN, 415 Volt ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs of Sheet metal single pole and neutral enclosure, 240 volts with a two pin and earth plug and socket complete with one single pole MCB capacity 20 amps ; Complete all as specified and directed by Engineer-in-charge. (for AC and geyser).

Supply and Fixing in repairs ,Fresh Air fan of size 250mm, Plastic body 1200RPM, electrically driven, 230volts, 50Hz, single phase, AC supply,copper winding dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to fan ; Complete all as specified and directed by Engineer-in-charge. Note: Making suitable opening for fixing air fan as required shall be deemed included in the quoted rate of item. old material retrieved from this item shall be deposited in store yard of AGE E/M

Supply and Fixing in repairs Exhaust fan of size 300mm, Heavy duty 1200RPM, electrically driven, 240volts, 50Hz, single phase, AC supply,copper winding dynamically balanced impeller for smooth and vibration free operation, complete with louvers,nuts for fixing exhaust fan and 3' long bolts, nuts for fixing louvers with civil work,wall hole, and provision of PVC insulated, flexible copper conductor cord of size 23/0.0076, three core from ceiling rose to exhaust fan for giving connection ; Complete all as specified and directed by Engineer-in-charge.. Note: Making suitable opening for fixing air fan as required shall be deemed included in the quoted rate of item. old material retrieved from this item shall be deposited in store yard of AGE E/M

Supply and Fixing in repairs LED tube light 20 watt, (4' long), 6500K, wall mounted, E-lite LED curve with high lumen batten with efficacy not less than of 100 lumens, with integrated electronic driver complete with all accessories ; Complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs LED street light fitting powder coated pressure die cast alminium compact High power LED street light with heat resistant toughened glass for 25 watt with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device bracket made out of GI Pipe 40mm medium grade 1.2 mtr long made to shape with fixing clamps of MS Flat 40x6mm nuts bolts Complete all as specified and directed.

Supply and Fixing in repairs 1100 volts grade heavy duty PVC cable insulated aluminium conductor served with inner sheating of PVC tape and over all PVCsheathed in service connection stranded conductor flatr 6 sqmm 2 core cable ; Complete all as specified and directed by Engineer-in-charge.

Supply and Fixing in repairs, Sub main wiring with two single pole 6 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , ; Complete all as specified and directed by Engineer-in-charge. Note:- 1 Two runs of 6 sqmm main cable one run of 6 sqmm for earth cable shall be measured as one unit/ one running meter.

Supply and Fixing in repairs, Sub main wiring with two single pole 6 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , on surface including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 6 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , ; Complete all as specified and directed by Engineer-in-charge. Note:- 1 Two runs of 6 sqmm main cable one run of 6 sqmm for earth cable & conduit shall be measured as one unit/ one running meter.

Supply and Fixing in repairs, Sub main wiring with two single pole 4 sqmm (nominal area) stranded copper conductor on surface FRLS PVC insulated and unsheathed cable drawn in existing non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , ; Complete all as specified and directed by Engineer-in-charge. Note:- 1 Two runs of 4 sqmm main cable one run of 4 sqmm for earth cable shall be measured as one unit/ one running meter.

Supply and Fixing in repairs, Sub main wiring with two single pole 4 sqmm (nominal area) stranded copper conductor FRLS PVC insulated and unsheathed cable drawn in and including non metalic PVC rigid conduit medium grade of suitable size with all standared fitting , on surface , including one run of continuous PVC insulated standed copper conductor PVC insulated stranded copper conductor FRLS cable 4 sqmm (nominal area) for earth continuty , including taking out and removal of old sub main wiring , ; Complete all as specified and directed by Engineer-in-charge. Note:- 1 Two runs of 4 sqmm main cable one run of 4 sqmm for earth cable & conduit shall be measured as one unit/ one running meter.

Material and Labour in repair for Earthing complete with galvanized steel earth plate electrods of size 60cmx60cmx6mm thick burried directly in ground vertically(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iron or steel earth wire 4 mm dia by means of bolts nuts check nuts and GI washers of Galvanised iron protected by steel pipe 15mm (light grade) all as shown in elecrrical plate No.3 of SSR Part-I and connecting to earthing test point (earth test point to be provided at 5 mtr distance from earth pit) and testing on completion including necessary excavation and earth work. The rate also include charcoal dust and salt in alternate layers 25 mm dia light grade GI pipe, funnel, wire mesh. Concrete 1:3:6 type C-1 for pit and RCC pit cover. The extra cost of the water- ing pipe,bends,elbows shall be included in the unit rate. Note : RCC pit cover shall be precast of RCC 1:2:4type B-1 80mm thick reinforced with XPM weighing not less than 4 Kg/Sqm.

Bharat Builder (BID ID -3367523)

M/s. M Company (BID ID -3365685)

RAJ KAMAL BUILDERS (BID ID -3375234)

m/s inder construction co (BID ID -3375750)