Repairs to joinery, plastering, flooring, plumbing, sanitary fittings, tilling and misc repairs in Santan Singh enclave and md accn of certain unit and roof, chajja, facia, parapet, shafts and sunken floor in OTM and Md accn at Tibri Mil Stn, GE GSR

Amount

Dismantling brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

Demolition of Mud in roofs, any thickness,including plastering and leeping (whether full thickness removed or only a part thereof) and removing mud/rubbish to a distance 100 m complete all as specified & directed.

M&L PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate) as in levelling course with water proofing compound @ as per manufacturer instructions by weight of cement finished even and smooth without using extra cement complete all as specified & directed.

M&L 15mm thick rendering on fair faces of concrete surfaces in CM 1:4 with water proofing compound @ as per manufacturer instructions by weight of cement and including taking down cement plaster built in cement mortar all as specified & directed.

M&L PCC 1:2:4 type B-0 (using 12.50 mm stone aggregate ) as in roof kerbs ,bed blocks for holdfasts coping ,benching etc. including weathering slightly rounded or chamfered angles and throating ,incl demo of old concrete complete all as specified & directed.

S&F 3 mm thick APP film based polymeric membrane minimum 3Kg/Sqm reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application over entire roof area with over lapping 100 mm to either sides and sealed in after cleaning down the surface acomplete all as specified & directed.

M & L for 40 mm thick brick tiles laid over 15 mm thick plaster in cement mortar 1:6 and jointed , grouted flush in cement mortar 1 :3 mixed 5% of crude of by weight of cement on roof paddind flush in CM 1:3 complete all as specified & directed.

All as per Srl item No 9 above but except tiles.

Demolition of plain cement concrete in sunken floors exc. 15 cm thick (above ground level) and disposing off the rubbish to a distance exceeding exceeding 50 m but not exceeding 100 mtr away to low lying areas complete all as specified & directed.

Supply & applying bitumen primer at the rate of 1.2kg /sqm for use in waterproofing and damp-proofing treatments all as specified & directed.

M & L for cement concrete 1:7:12 type F-2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified & directed.

M&L 25 mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in sub base for receiving the floor finishes complete all as specified & directed.

M& L Non skid dark coloured ceramic tiles 7 to 8 mm thick joint free (square/rectangular) area of each tile exceeding 0.06 sqm to 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match including 15 mm thick screed bed in cm 1:6 complete all as specified & directed.

S&F rotational moulded polyethylene 3-layer water storage tank of 500 ltr capacity (cylindr vertical with closed top) hoisted and fixed in position including dismantling of old unserviceable complete all as specified & directed.

S&F 20 mm float ball brass valve high pressure with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (make Prayag/ polytuff)

Disconnecting existing tanks setting aside (or lowering if required) for repair cleaning and removing all scale and dirt ,etc. from tanks and form mouths of circulating pipes ,etc. and hoisting if required reconnecting and refixing in position capacity exc. 250 n exc. 500 ltrs complete all as specified & directed.

Taking up and down GI pipe15mm bore including fittings, connection, including cleaning for reuse or removal to store complete all as specified & directed.

All as per Srl item No 18 above but 20mm bore of pipe

S&F GI tubing 15mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked complete all as specified & directed.

All as per Srl item No 20 above but fixing only (old serviceable pipe re-used)

S&F GI tubing 20mm bore medium grade, fixed to wall/ceiling or floor etc with all fittings ISI marked all as spd

All as per Srl item No 22 above but fixing only (old serviceable pipe re-used)

S & F in repair 15 mm Gun metal ,globe or gate valves with iron wheel head ,screwed both ends for iron pipe and fixed complete all as specified and directed.

All as per Srl item No 24 above here-in-before but 20mm bore

Dismantling of cast iron ,PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches , if required.

S&F 110mm bore PVC (SWR) ISI marks pipes single socketed in any length with rubber ring joints fixed to wall with dash true nut and bolt at every 2mtr length all as specified & directed.

All as per item No 27 above but laid in trechesfloor as in 110mm bore all as specified & directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls or floor complete all as specified.

All as per item No 29 but in renches as in 75mm bore PVC (SWR) pipes complete all as specified.

S&F PVC (SWR ) bends 110 mm bore any radius.

S&F PVC (SWR ) bends 110 mm bore any radius with access door.

S&F PVC (SWR ) bends 75 mm bore any radius.

S&F PVC (SWR ) bends 75 mm bore any radius with access door.

S&F PVC (SWR )single junction ( single T ) 110/75 mm bore equal or unequal.

S&F PVC (SWR )single junction ( single T ) 110 mm bore equal or unequal with access door.

S&F PVC (SWR )single junction ( single T ) 75 mm bore equal or unequal with access door.

S&F PVC (SWR ) vent cowl 110 mm bore.

All as per Srl item No 38 above but 75 mm bore.

M&L PVC (SWR ) floor trap 100/75 mm plain with grating incl. jointing with solvent cement

S & F stack clamps (100 mm pipe) out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified & directed.

All as per Srl item No 41 above but 75 mm bore.

S&F in repair vitreous china squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap, integral foot rest including water connection to trap and flushing pipe, flushing cistern etc complete and bedding in PCC 1:7:12 type F-2 complete all as specified & directed. Note:- Flush pipe and flushing cistern to be measured and paid separately.

S&F in repair PVC low level flushing cistern 10 ltr capacity with syphonic action PVC flot valve ,brackets and 32 mm bore PVC flush pipe etc. all as sfd and fixed in repair.

S&F in repair for Vitreous China wash down water closet pan ( pedestal pattern) white ( excluding flushing cistern and flush pipe) including plastic water closet seat white with jet, closed pattern with flat botton and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed.

S&F in repairs plastic water closet seat black closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device complete all as specified & directed.

S&F CP brass Health faucet (hand shower) including flexible pipe of required length fixing to 15m dia pipe with brass check nut complete all as specifed and directed.

Taking down cement plaster /deteriorated concrete from bottom of RCC chajjas /RCC facia/RCC beam /RCC slab/brick work with necessary form work , including raking out joints ,hacking for key , scrubbing down with water (at a building height upto 12.00 mtr ) and removing rubbish to a distance exceeding 50 mtr but not exceeding 100 mtr away and M & L for 15 mm thick plaster in CM 1:3 finished even and smooth without using extra cement on bottom of RCC chajjas & RCC facia complete all as specified & directed.

M & L cutting or uprooting grass on mud phuska roofs,vertical chajjas, RCC etc. removing rubbish off the premises ,cleaning surface and preoaring to receive new cement pointing.

M & L for racking out joints /pointing including pointing in cement motar in CM (1:3) to brick tiles 30 cm by 15 cm laid flat , in floors , roofs ceilings, chajjas etc. complete all as specified & directed.

M & L flush pointing in cement mortar 1:3 to bricks laid flat or brick tiles in pavings complete all as specified and directed.

Taking down shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each and refixing in the same opening after rectify the defect complete all as specified and directed.

Taking down chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) complete all as specified and directed

Taking down shutters of any description exc 1.00 sqm and n. exc 2 sqm each complete all as specified and directed.

S&F Factory made solid PVC door frame size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing shown in section 8 of SSR Part-II complete all as specified and directed.

S&F in repair stainless steel/ wire incl taking down existing cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and directed.

Hacking out old broken glass panes of any thickness description from wooden frame or aluminium frame or steel frame or brick surrounds, glazed with putty or fixed with beads, aluminium clip and prepared to receive new glass panes complete all as specified and directed.

S&F Sheet glass, 4mm thick ordinary quality and glazing with aluminium glazing clips, rubber packing/ oil putting in squares not exc 0.50 sqm in each complete all as specified and directed

S&F Sheet glass, 3mm thick ordinary quality in squares not exc 0.50 sqm in each including wooden beading fixed with nail complete all as specified and directed

M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed in repairs with screws, built in cup board/partitions and kitchen CB shutter etc complete all as specified and directed.

External teak wood lipping, 6mm thick to 19/20 mm thick block board or veneered partical board fixed with nails including french polish etc complete all as specified and directed.

MS peg set of six powder coated fixed in repairs complete all as specified and directed.

S&F in repair 40 mm dia, cup board knobs fixed with nut, screw and washer of mild steel , bright finish complete all as specified and directed.

S&F in repair 300mm mild steel ordinary rat tail rod pattern spring including roller plate and fixing with necessary welding complete all as specified and directed.

S&F in repair crystal coner shlef 3 pieces size 7" , 9", 11" assembly set with aluminum alloy bracket and guard rail complete all as specified and directed.

Petty repair to existing in built wooden cup board, locks, hinges inclduing necessary welding and making the lock/ wooden cup boards complete serviceable all as per existing pattern as directed by Engineer-in-Charge including provision of duplicate keys as required.

Petty repair to existing steel door by welding hinges or removing the steel door shutters from the frame and refixing after making serviceable including painting on repair surface complete all as specified and directed.

S&F Aluminium alloy handles, 125mm size fabricated complete all as specified and directed

S&F in repair Aluminium alloy handles, 125mm size fabricated complete all as specified and directed

S&F 100mm long butt hinges, medium wieght cold rolled mild steel fixed complete all as specified and directed.

S&F in repair 300mm long aluminum alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sec and fixing bolts and sliding bolts of cst aluminum alloy and fixed complete all as specified and directed.

S&F 150mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed

S&F in repairs 150mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repair 150mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring complete all as specified and directed.

S&F in repairs CP grating 100mm to 140mm dia complete all as specified and directed.

S&F in repair MS pipe 20/25 mm bore, powder coated chromium plated with fixing brackets stops rollers including fancy type knops two Nos to each curtain rod complete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1mm plugs, washers and waste pipe including fixing cantilever brackets and connecting union to pipe over all size size 915mmx460mm with bowl size 410mm x 330 mm x 160mm complete all as specified and directed.

S&F in repair stainless steel plate rack size 75cm x 75cm and fixed to wall complete all as specified and directed.

Dismantling of water tanks and removing to store of capacity exc 250 ltrs but n. exc 500 ltrs complete all as specified and directed.

Dismantling of water tanks of capacity exc 250 ltrs but n. exc 500 ltrs and S&F rotational moulded polythene triple layers 500 Ltrs storage tanks cylindrical,vertical with closed top hoisted and fixed in position including S & F 20MM bore PTMT ball valve epoxy coated minimum weight 210 gms with aluminium rod complete complete all as specified and directed.

S&F rotational moulded polythene triple layers 500 Ltrs storage tanks cylindrical,vertical with closed top hoisted and fixed in position complete all as specified and directed.

PVC cover with fitting of PVC water tganks of capacity exc 250 ltrs but not exc 1000 ltr fixed in repairs complete all as specified and directed.

Cleaning and removing all scale and dirt etc from over head water tanks and mouth of circulating pipe etc of capacity exc 250 ltr but not exceeding 1000 ltr using bleaching and refixing in the same position.

S&F in repairs kitchen sink couping 75 mm to 100mm dia, including PVC waste pipe complete all as specified and directed.

S&F in repairs Sink waste pipe fixed complete all as specified & directed

S& F in repair CP waste coupling 32/40mm dia for WHB complete all as specified & directed

S & F in repair brass chromium plates bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

S&F in repair new brass spindle with nylon washer and removing leakage of water of any bib tap/stop valve suitable for 15 to 25mm bore pipe complete all as specified.

S&F in repair new brass leg with nylon washer and removing leakage of water of any wall mixture suitable length for 15 to 25mm bore pipe complete all as specified.

Taking up or down 15mm dia steel tubing and connections incl cleaning for refixing or removal to store all as specified and directed.

Refixing 15mm dia steel tubing and connection in new or old position (in wall ceiling floors etc)all as specified and directed.

S&F 15mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.

Taking up or down 20mm dia steel tubing and connections incl cleaning for refixing or removal to store all as specified and directed.

Refixing 20mm dia steel tubing and connection in new or old position (in wall ceiling floors etc)all as specified and directed.

S&F 20mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.

Taking up or down 25mm dia steel tubing and connections incl cleaning for refixing or removal to store all as specified and directed.

Refixing 25 mm dia steel tubing and connection in new or old position (in wall ceiling floors etc) all as specified and directed.

S&F 25mm dia GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floors all as specified and directed.

S&F in repair bib taps 15mm dia chromium plated fancy type long body with capstan head screwed down screwed for iron pipe or for brass ferrule and fixed in repairs all as specified and directed.

S&F in repairs angel stop valve 15mm dia cast copper along chromium plated with capastan head screwed both ends for iron pipe or for union all as specified and directed.

S&F in repair 20 mm ball brass valve high pressure with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (make Prayag/ polytuf)

S&F in repairs vitreous china wash down water closet (pedestal pattern) white complete, incl connection to drain pipe and to flushing pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) anglo indian type white complete, incl connection to drain pipe and to flushing pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed.

S&F plastic water closet seat white closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device all as specified and directed.

S&F in repairs vitreous china wash basin white flat back 580mmx 450mm excluding tap, waste, chine and plug and incl braches but exclusive of fixing of waste pipe all as specified and directed.

S&F PVC connections 15mm dia and 600mm long with brass nuts all as specified and directed.

S&F PVC connections 15mm dia and 450mm long with PTMT nuts all as specified and directed.

S&F in repair PVC 10 lts capacity syphonic action type flushing cistern low level, white with inlet, ball valve float and handle incl brackets all as specified and directed.

S&F in repairs brass chroumium plated shower rose 125mm size all as specified and directed.

S&F tubular, towel rail brass chromium plated 20mm dia D type 60cm long between flanges all as specified and directed.

S & F in repair CP steel flushing jet including pipe for Europlan type closet of suitabe length with brass check nut complete.

S&F in repair CP Wall Mixer for mixing hot and cold with crutch complete all as specified & directed.

S & F in repair centre hole basin mixture without pop up waste system all as specified and directed.

S&F in repair PVC kit complete for low level PVC cistern all as specified and directed.

Dismantling of floor,hearth or wall tiling incl cement morter bedding area n exc 1.50 Sqm complete all as specified and directed.

S&F non skid ceramic dark/ light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.

M&L for dark/ light coloured (non skid) ceramic tiles of size 300x300x7mm thick over and incl 15mm thick cement screed in CM (1:6) set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the colour of tiles complete all as specified and directed.

M&L for ceramic glazed dark/ light coloured tiles of size 300x200 x 6mm thick on and incl 10mm thick rendering in cm(1:4) set and jointed in neat cement slurry and pointed in colored cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/dado complete all as specified and directed.

Taking down cement plaster from wall's incl raking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for preparation of new plastered walls surfaces and applying two coats of oil bound distemper over one coat of primer on walls over incl 1mm thick wall care putty complete all as specified.

M&L for prepartion of old surfaces and applying one coats oil bound distemper paint on walls complete all as specified.

M&L for complete removal of existing treatment applying two coats of oil bound distemper over one coat of primer on walls over incl 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of old plastered or unplastered/old decorated surface of walls and applying one coats of white wash complete all spd and directed.

M&L for preparation of old decorated surfaces plastered or un plastered of ceilng and applying one coat of white wash on ceiling incl complete removal of existing treatment complete all as specified and directed.

M & L for painting one coat of synthetic enamel paint to previously treated wooden surfaces of any description not otherwise described over 10cm width or girth with including preparation of old decorated surface complete all as specified and directed by Engr-In- Charge

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement complete all as specified and didrected.

All as per Srl item No 128 above but in CM 1:6.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and didrected.

Dismantling of brick work, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:4 complete all as specified and directed

All as per Srl item No 132 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 131 shall be reused after necessary cleaning of mortar)

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement morter 1:4 complete all as specified and directed.

M&L for preparation of newly plastered/ un plastered surfaces of walls and applying two coats of cement base paint of shade as approved over a coat of cement primer complete all as specified and directed.

M&L for preparation of new surface and applying two coats of oil bound distemper on walls complete all as specified and directed.

M&L for preparation of old decorated surface and applying two coats of oil bound distemper on walls and complete removal of existing tratment complete all as specified and directed.

M&L for prepration of newly plastered surfae and applying three coat of white wash on ceiling complete all as specified and directed.

M&L for preparation/ complete removal existing treatment of old decorated surfaces plastered/ unplastered of walls and applying two coats of cement base paint including cornices etc complete all as specified and directed.

M&L for preparation of old decorated surfaces plastered or un plastered of ceiling and applying two coats of white wash on ceiling incl complete removal of existing treatment complete all as specified and directed.

S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed.

S&F pressed steel frames 1.25mm thick for door size of frame 125 X 60mm with single ordouble rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges complete all as specified and directed.

S&F steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mmx25mm double rebated comprises of glazed & gauged skelton shutter of (required no of gauged shutters and glazed shutters with or without AC opening) ERW section 50mmx20mm & 1mm thick with one or two openable leaf consisting of two number sash bars of T-Section 20mmx3mm complete welded to frame with one vertical mullion of ERW box type T-Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 (four Nos for each window) including following fittings welded to the frame shutter :- Ref Drg No CE JZ/TD-06/07:- (i) Hold fast,150mm long mild steel flat iron 12X3mm made to shape -04 Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iii) MS Tower bolt 150mm long-02 Nos per leaf (iv) Z sec 20mmX25mm,100mm long stopper -01 Nos per leaf (v) Cleat 55mm long of hollow square 15mmX12mm-02Nos per leaf (vi) Fabrication & fixing arrangements as Drg No CEJZ/TD-06-07 (vii) M S guard bar 12mm square bars @120mm C/C fixed horizontly.

S&F MS box type window/ventilator fixed type with glazing bar without wire work and glass as per Drg No CE JZ-70/06-07 dated 07.06.07 with guard bar including priming coat complete all as specified and directed

S&F factory made, 35 mm thick flush shutter, soild core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F IInd class hard wood glazed and skeleton shutters 35mm thick divided into square open rebated and prepared to receive glass, gauge etc (without sash bars) edges for framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of member of shutters as specified in SSR Part-I, Section 8 clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.

S&F MS framed work as in door or gates of angle or other section with gusset plates, rail, braces etc and similar work incl primer conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples including beads complete all as specified and directed

S&F in repairs GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples including beads complete all as specified and directed

S&F figured glass, 3mm thick, pin headed type and glazing with oil putty, in squares, not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F 300mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm aluminium alloy handles, fabricated type anodised complete all as specified and directed

S&F 100mm extruded aluminium alloy handles, fabricated bype, anodised complete all as specified and directed.

S & F in repair for block boards,18/19 mm thick , grade 1 quality, exterior grade commercial type, fixed with screws to timber frame work incl dismantling of old wooden work complete all as specified and directed.

S&F 100mm long hasp and staple safety type brass with mild steel hinge pin including bolt to hinge plate and fixed with screw all as specified and directed.

M&L two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described above priming coat of red oxide including prepration of surfaces complete all as specified and directed.

M&L two coats of synthetic enamel painting on old steel surfaces of any description over 10 cm in width or girth not otherwise described above including prepration of old painted surfaces complete all as specified and directed.

M&L two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm width or girth not otherwise described above pink primer including prepration of surfaces complete all as specified and directed.

M&L for two coats of synthetic enamel painti over old wooden surfaces exceeding 10cm width or girth including prepration of old painted surfaces complete all as specified and directed.

S&F glazed ceramic coloured tiles thick etc on vertical surfaces such as skirting, dados and risers to steps etc 350x250x7mm/ 450x350x 7mm thick set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete and all as specified and directed.

S&F 15mm angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm- 90 gms) complete all as specified and directed.

S&F in stop valves 15mm of PTMT (concealed type) any colour high pressure screwed for iron pipe and fixed (minimum weight 15mm - 90mm gms/ 20mm -92 gms) complete all as specified and directed.

S&F 15mm bib taps standard of PTMT any colour screwed for iron pipe and fixed (minium wieght 15mm -90gms/ 20mm - 25 gms) complete all as specified and directed.

S&F in repairs 15mm dia pillar tap of PTMT fancy type (minimum wt 120 gms) any colour screwed for iron pipe complete all as specified and directed.

S&F in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed.

M&L for 0.75mtr wide 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in plinth protection finishing even and fair complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for black Zebra bhainsalana marble/ green marble work 118 to 20mm thick (table rubbed and polished) in steps, jambs, pillars window cills , cooking platforms and like in cement mortar ( 1:4) 15mm thick incl pointing in white cement ( 1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in shelves including demolition complete all as specified and directed.

M&L mild steel TMT bars 6 to 8 mm dia, cut to length, bent to shape required including crancking spirally for hooping for columns, hookig ends and binding with and including MS wire annealed not less than 0.9mm dia Or securing with clips complete all as specified and directed.

Use and waste of form work to Chullah hoods, chajjas, weather shades, corbels, water troughs and similar items including edges rough finished surfaces of concrete complete all as specified and directed.

Cutting down plants/ shrubs of girth n. exc 15cm from roof tops/ sides of external walls of building, chajjas, wall , junction etc including taking out penetrated roots in to the wall, slab surfaces, shafts and applying "STUFALO" solution (harbal medicine) as per manufacture's instructions in and around the surfaces and making good the location with PCC (1:2:4) and CM (1:2) including necessary scaffolding as per site requirement complete all as specified and directed.

KAILASH CONSTRUCTION CO

M/S DARSHAN & CO

Harbhajan electric co

M/s. Nirmal Singh

s.v and co

kaushal builders

AVTAR SINGH RAJU

P S BUILDERS