Construction of parking including approach road to Circuit House Willy Park from cart road near RTO office Kms 0/00 to 0/130 under Smart city Project.

Amount

Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth including carriage of materials within all leads and lifts as per Technical Specification Clause 1603.1.

Excavation in hilly area in ordinary rock not requiring blasting by mechanical means including cutting and trimming of slopes and disposal of cut material within all leads and lifts including carriage of materialsas per Clause 1603.2.

Excavation in soil in Hilly Area by manual means including cutting and trimming of side slopes and disposing of excavated earth including carriage of materials within all leads and lifts as per drawing and Technical Specification Clause 1603.1.

Earthwork in excavation for foundation of structures upto 3m depth as per drawing and technical specification Clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved materials including carriage of materials within all leads and lifts.

Excavation in drains and channels etc. in all kinds of earth work including spade work, pick work, jumper work, blasting work and chiselling/ wedging out of rock etc. including dressing of sides and bed and disposing of excavated earth upto all leads and lifts and disposed earth to be levelled and neatly dressed as directed by Engineer-in-charge within all leads and lifts including clearing of jungle.

Providing form work with steel plates of 3.15mm thick welded with angle iron in frames of 30mm X 30mm X 5mm, so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/ depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work:- Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like including carriage of materials in all leads and lifts.

Providing and Laying concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 (1 cement:6 sand :12 graded stone aggregate 40mm nominal size) including carriage of materials within all leads and lifts.

Providing and Laying concrete for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 (1 cement:4 sand :8 graded stone aggregate 40mm nominal size) including carriage of materials within all leads and lifts.

Providing and Laying Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 R.C.C grade M 20 (1:2:4) nominal mix including carriage of materials within all leads and lifts.

Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 including carriage of materials within all leads and lifts.

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803,1202 & 1203 including carriage of materials in all leads and lifts:- PCC grade M-10 (Nominal mix 1:3:6).

Stone soling properly hand-packed filling interstices with Kharanja stone including spreading watering of binding materials moorum or earth etc. complete as per HP.PWD specification 150mm spread thickness (finished work including materials and labour) including carriage of materials within all leads and lifts.

Backfilling behind abutment, wing wall and return wall complete as per drawings and technical specification Clause 1204.3.8 in Granular materials including carriage of materials within all leads and lifts.

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 110mm dia PVC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7 including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Providing and Laying of Interlocking Concrete Blcok Pavements having thickness 60mm as per drawing and Technical Specification Clause 1504 including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Providing fitting and fixing mild steel railing complete as per drawing and technical specifications Clause 1208.2 including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamal paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of materials within all leads and lifts in With enamal paint other then white.

Providing and fixing pipes in trenches PVC (Finolex) type "A" pipes including filling the joints with approved adhesive and inclunding require No. of coller and clamps etc complete including carriage of materials within all leads and lifts :- (i) 150mm nominal size.

Providing and fixing PVC Finolex plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts (i) 150mm nominal size.

Providing and fixing PVC Finolex collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts (i) 150mm nominal size.

Providing and fixing PVC offset 45degree ISI marked including fixing with approved adhesive etc. complete 150mm dia complete including carriage of materials within all leads and lifts.

Constructing manhole with R.C.C top slab in 1:2:4 mix in 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete1:4:8 (1cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) :- (i) inside size 800mm X 800mm and 560mm deep including 600mm dia precast cemocrete manhole cover with frame (Heavy duty) with 20mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 sand) including carriage of materials within all leads and lifts.

Inside size 800mm x 800mm and 1000mm deep including 600mm dia precast R.C.C. covers of NTC make or equivalent manhole cover with frame (medium duty) with 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 sand) including carriage of materials within all leads and lifts.

Providing and fixing precast R.C.C. covers of semocrate cover including framesize 600mm X 600mm including carriage of materials within all leads and lifts as per direction of Engineer-in-charge.

Disposal of excavated earth, Dismantling materials & sluge by mechanical means upto 10kms on approved dumping site of M.C. Shimla or on arranged by the contractor i.e. through all mode of transportation including head load animal load or mechanical means alongwith transportation of the unuseful material for disposing including payment of prescribed charges of dumping to the owener of dumping site through all modes of transporation including head load animal load or mechanical means alongwith its levelling, fine dressing and to complete the work by mechanized means and labour (if any required) All useful materials such as stones, aggregate and slates shall be sorted out and stacked along roads side any loss of the public/ private property during the courses of execution shall be the absolute responsibility of the contractor which shall have to be dully compensated by him in all respect as per direction of Engineer-in-Charge.

ABHINEET SHARMA