138WE/L-147/2025-26

Amount

Dismantling plain or corrugated steel sheeting any gauge or thickness including nainital or similar pattern complete all as specified and/or as directed by Engr-in-Charge.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and/or directed by Engr-in-Charge.

S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and/or directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but including backing), rubbish off the premises complete all as specified and/or as directed by Engr-in-Charge.

M&L for Non - skid coloured Ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and/or as directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surfaces of size 450x350x7mm/ 350x250x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortar (1:4) as in backing coat complete all as specified and/or as directed by Engr-in-Charge.

Taking down chowkhat or frame with shutters (without taking of shutters from the frame) exc 1.5 sqm each but not exc 4 sqm each any type of door (wooden, aluminium & steel etc) complete all as specified and/or as directed by Engr-in-Charge.

Taking down chowkhat or frame with shutters (without taking of shutters from the frame) not exc 1.5 sqm each any type of door (wooden, aluminium & steel etc) complete all as specified and/or as directed by Engr-in-Charge.

S&F Flush shutters 30mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and/or as directed by Engr-in-Charge.

M&L of second class hardwood plain solid straight chowkats and frames rebated and put together with glue pinned joints supplied and fixed complete all as specified and/or as directed by Engr-in-Charge.

S&F steel windows with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars complete all as specified and/or as directed by Engr-in-Charge.

S&F steel windows with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars complete all as specified and/or as directed by Engr-in-Charge.

S&F MS flat iron as in hold fast etc and similar work complete all as specified and/or as directed by Engr-in-Charge.

M&L PCC 1:3:6, type C1, (20mm graded stone crushed aggregate) as in anchoring hold fast etc. bed plate etc. complete all as specified and/or as directed by Engr-in-Charge.

S&F Stainless Steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or aluminium wire staples, complete all as specified and/or as directed by Engr-in-Charge.

M&L for plain sheet glass 3.00 mm thick ordinary quality and glazing with oil putty or wooden beads in square or fixed with aluminium section including rubber beads not exc 0.50 sqm in each pane complete all as specified and/ or as directed by Engr-in-Charge.

Preparing of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and/or as directed by Engr-in-Charge.

Preparation of new surfaces of steel of any description over 10cm grith or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of rex oxide primer complete all as specified and/or as directed by Engr-in-Charge.

M&L Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and/or as directed by Engr-in-Charge.

S&F 250mm Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed complete all as specified and/or as directed by Engr-in-Charge.

S&F Aluminium, anodised barrel tower bolts of extruded section and fixed for 200 mm length complete all as specified and directed by Engr-in-Charge

S&F Aluminium handles, 150mm fabricated type anodised complete all as specified and directed by Engr-in-Charge

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engr-in-Charge

S&F in repair aluminium door closer (aluminium extruded section) hydraulically regulated designation No 3, universe type, suitable for door shutter of 851 mm to 1000 in width and of weight 61 to 80 kg, complete all as specified and/or as directed by Engr-in-Charge.

S&F PVC coated mild steel conduit pipe 25 mm bore (drapery rod) with a pair of PVC coated MS clamps to hold drapery rod and decorated attachement at one or both ends of drapery rod, fixed to opening of door / windows contained with pair of clamps and a pair of side ornamental attachments complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for 15 mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 6 complete all as specified and directed by Engr-in-Charge

M&L for preparation of new plastered surface and apply two coats of cement base paint over a coat of primer complete all as specified and directed by Engr-in-Charge

M&L for preparation of old plastered wall surface of any description and applying two coats of cement based paint complete all as specified and directed by Engr-in-Charge

Demolition of brick work / block masonry or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and/or directed by Engr-in-Charge.

M&L precast solid blocks in cement concrete 1:3:6 type C-1 (20mm graded crushed stone aggregate) as in block masonry, exc.10cm in width and set in cement mortar 1:6, complete all as specified and/or as directed by Engr-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below and above ground level) and removing the unserviceable materials to a distance not exceeding 100m all as specified and as directed.

M&L for 75 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in plinth protection finished even and smooth with out using extra cement, complete all as specified and/or as directed by the Engr-in-Charge.

M&L for 100mm thick PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregate) as in sub sub base complete all as specified and directed.

S&F gypsum ceiling board 8 to 9 mm thick in 600 x 600 mm panel designer ceiling tiles laminated with white colour PVC film on the face side and a metalized polyester film on the back side, conforming to IS-14862 type B category three including suspended false ceiling using E-grid suspended ceiling grid system of grid size 600x600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross Tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24mm to be placed in the grid suspended by 4mm GI wire hanger to be fixed as per site requirement including taking down of old false ceiling complete all as specified and directed by Engr-in-Charge.

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding including dismantling of old complete all as specified and directed by Engr-in-Charge.

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and not exc 25 sqcm in section including dismantling framed wk complete all as specified and directed by Engr-in-Charge.

M&L for 2nd class soft wood clean sawn as in beading for edges of ceiling, lining, or wooden flooring work fixed with nails exc 6 sqcm and not exc 13 sqcm in section complete all as specified and/or as directed by Engr-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) including complete fittings such as switches, ceiling rose, regulators, socket etc. and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface all as spfd and directed by Engr-in-Charge.

Point wiring complete with 1.5 Sqmm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead all as specified and directed for the following:-

One light/exhaust fan point controlled by one way switch.

One 3 pin socket outlet 5 Amp on independent board.

One 3 pin socket outlet 5 Amp on the same board with other switches.

All as item No 41 above, but using cables 2.5 Sqmm size for 15 Amps socket point on independent board.

S&F lamp holder insulated body with back plate.

S&F switch piano flush button single pole 6 Amps 230 volts one way complete all as directed.

S&F switch Socket combination 5 pin 5 & 15 Amps flush type.230 volts complete all as directed.

S&F switch Socket combination flush type 3/5 pin 5/6 Amps 230 volts complete all as directed.

S&F ceiling rose, surface Bakelite three terminals complete all as directed.

S&F in replacement of sheet metal enclosure for DBs double door when MCB's to be used triple pole & neutral 415 Volts 4 Ways all as specified and directed by Engr-in-Charge.

S&F in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 215 Volts 8 Ways all as specified and directed by Engr-in-Charge.

S&F MCB TPN 100 Amp 415 Volts AC ISI marked all as specified and directed by Engr-in-Charge.

S&F MCB SPN 40 Amp 220 Volts AC ISI marked all as specified and directed by Engr-in-Charge.

S&F socket outlet 2 in 1, 5 pin 6 Amps complete all as specified and directed.

S&F MCB SP 6-32 Amps, 240 Volts 50 HZ complete all as specified and directed.

S&F in replacement of LED light fitting 1x20 watt, 220 volt AC, decorative box type with driver, holder incl LED tube light suitable for roof ceiling including connecting up with, three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

S&F in replacement LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

S&F in replacement Air circulator made of sturdy Engineering plastic complete with louvers, shutter, voltage 230 volt, 50 Htz RPM 1200, copper winding of sweep 250 mm complete all as specified and directed by Engr-in-Charge. Note- Old exhaust fan has to be deposited to MES store yard .

S&F in replacement of Old U/S Lamp LED 7/9 Watt, 230 volts 50 Hz AC complete all as specified.

M&L for replacement of sub main wiring with 2 runs of FRLS PVC insulated multistrand, copper conductor cable of size 6 Sqmm along with one run of 6 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing & caping complete all as specified and/or as directed by Engr-in-Charge.

S&F in replacement of LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed .

Taking out U/S LT UG cable for relaying/ replacement any size cable all as directed by Engr-In-Charge. Note:- Excavation and earth work shall be measured paid separately under respective item.

Supply, laying and testing of XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of size 70 sqmm 3.5 core in trenches or passing through pipe or fixed on surface complete all as specified and/or as directed by Engr-in-Charge.

Supply, laying and testing of XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade of size 25 sqmm 4 core in trenches or passing through pipe or fixed on surface complete all as specified and/or as directed by Engr-in-Charge.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth, for foundation etc. or for shafts, wells cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc 1.5m in depth in soft/loose soil and getting out, complete all as specified and as directed.

Returning, filling in (soil), including spreading, levelling, watering and well ramming in layers not exc. 25cm, complete all as specified and directed by Engr in Charge.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed by Engr in Charge.

M&L for sand cushioning to under ground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, 2009. Note : Punned thickness only will be measured and paid.

Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-1 flat size 250 mm x 150 mm x 40mm, complete all as specified and directed.

M&L in replacement of 40 mm GI Pipe light grade for cable protection in road crossing including cutting to required depth and making good surface road surfaces by filling with PCC 1:2:4 type B2 using 40mm graded stone aggregate complete all as specified and directed by Engr in Charge.

M&L for earthing complete with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel . Earth lead protected by 40mm dia (medium grade) GI tubing, funnel, wire mesh, 20mm bore GI tubing (light grade) watering pipe, including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350 x 350 x 50mm reinforced with 8mm dia TMT bars @ 15cm c/c in both ways and 10 mm dia MS handle (01 No) of suitable size for lifting of cover slab, filling with suitable including necessary excavation and earth work in any type of soil all as shown in Electrical plate No 3 of SSR Part-I and testing on completion, complete all as specified and/or as directed by Engr-in-Charge.

M&L for earthing complete with galvanised steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised strip 25x 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel . Earth lead protected by 40mm dia (medium grade) GI tubing, funnel, wire mesh, 20mm bore GI tubing (light grade) watering pipe, including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350 x 350 x 50mm reinforced with 8mm dia TMT bars @ 15cm c/c in both ways and 10 mm dia MS handle (01 No) of suitable size for lifting of cover slab, filling with suitable including necessary excavation and earth work in any type of soil all as shown in Electrical plate No 3 of SSR Part-I and testing on completion, complete all as specified and/or as directed by Engr-in-Charge.

M&L for installing, testing and commissioning of factory made bus bar chamber comprising of 4 Nos aluminium bus bar of 200 Amp rating supported on insulator and enclosed with sheet steel enclosure out door type made out of 3.15 mm thick CRCA sheet, with top edge tapered, dust and vermin proof, having locking arrangement at front and opening arrangement from front & rear both including fixing arrangement on pole /grouting in floor, with colour coded FRP with compression cable glands for entry & exit of cables, powder coated complete all as specified and directed by Engr-in-change.

RANA ENTERPRISES (BID ID -3394714)

SHUBHAM ENGINEERS & BUILDERS (BID ID -3389138)

R B TRADERS (BID ID -3389504)

Mehar Enterprises (BID ID -3398129)