GE/ALP (8209B) KOLKATA OF 2023-24

Amount

Dismantiling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering with CM (1:4) (upto 12 storey height) of bldg complete all as specified and directed.

Material and labour for coloured glazed ceramic tiles in vertical surface 300x 200x7mm thick over and including 10mm thick rendering in cement mortar (1:3). Set and jointed in neat cement slurry and pointed in whire or coloured cement to match, complete all as specified and directed (upto 12 storey bldg).

M&L for glazed ceramic tiles in vertical surface 300mm X 600mm X 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering with CM (1:4) (upto 12 storey height) of bldg complete all as specified and directed.

M&L for coloured non skid ceramic floor tiles area of each tile exc 0.06 but n exc 0.11 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed with CM (1:6) (upto 12 storey ht) of bldg complete all as specified and directed.

M&L for coloured non skid ceramic floor tiles area of each tile exc 0.11 but n exc 0.18 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed with CM (1:6) (upto 12 storey height) of bldg complete all as specified and directed.

M&L for granite(of any type) tiles 20mm thick for slab machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15 mm thick screed bed in cement mortar ( 1:6 ) including grinding & polishing complete all as specified and directed. (upto 12 storey High of building)

M&L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over and including 15mm thick cement mortar bedding (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. (Note:- Screed bed shall be measured and paid Seperately under respective items of BOQ') (upto 04 storey High of building) Note : Size of Granite shall be as decided by the GE

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S&F in repair CI Nahani trap of 100mm dia, with grating including jointing to waste pipe fixed in cement concrete, type B-1 (1:2:4) complete all as specified and directed.

S & F in repair Vitreous China Squatting pan, Orissa pattern, size 580 x 440 mm white with `P' or `S' trap, front or back inlet and integral foot rests including connection to trap, to flushing pipe etc. including making good to floor complete all as specified and directed.

S& F in repair vitreous china white wash hand basin flat back size of 550x400mm including brackets including cutting, pinning in ends of brackets or erecting stand.

S&F in repair sinks with drainage board made of stainless steel 1mm thick, kitchen with plugs, washer and wastes; Including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm and bowl size 410mm x 330mm x160mm. complete all as specified and directed.

All as per item No 13 above but, without drainage board overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm. complete all as specified and directed.

S&F for kitchen plate rack made out of 1mm thick stainless steel of size 750mm x 600x 200mm complete all as specified and directed.

S & F in repair 10 ltrs capacity PVC valveless, syphonic action type,flushing cistern,low level,white,with inlet ,ball valve, float and handle including 600mm PVC connector pipe and flush pipe (long bend) for low level cistern complete all as specified and directed.

S & F in repair 32mm dia PVC flexible waste pipe for drain of water from Sink and WHB complete all as specified and directed.

S&F in repair 32mm dia waste coupling of PTMT (half or full threaded) complete all as specified and directed.

S&F in repair 40mm dia waste coupling of PTMT (half or full threaded) complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 750 mm

S&F in repair syphone washer /ball cock washer for low level cistern complete all as specified and directed.

S&F in repair fancy type 15 mm bore Pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without letterer 'Hot' or 'Cold' with long screwed shank and flynuts, screwed for iron pipe and fixed.

S&F in repair fancy type 15 mm bore bib taps, cast copper alloy with capstan heads, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S&F in repair fancy type 15mm bore Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair fancy type 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair fancy type 15 mm angle cock cast copper alloy with fancy type chromium plated with high pressure, with crutch butterfly handle, screwed both ends for iron pipe or for unions and fixed.

All as per item No 26 above but 2-in-1 angle cock.

S&F in repair CP Health faucet with all necessary fittings complete all as specified and as directed.

S&F in repair soap dish stainless steel and fixed with screw including wooden/plastic cleats complete all as specified and directed.

S&F for towel rail 600mm long of PTMT fixed with and including chromium plated brass screws & wooden/plastic cleats(Minimum weight 190 gms)

S&F in repair of stainless steel brackets of size 100mmx30mmx1mm thick for 15mm/20mm external dia curtain rail complete all as specified and directed.

S&F in repair 20mm dia chromium plated curtain rails fixing with brackets of size 100mm x 30mm x 1mm, stops, rollers etc incl taking down u/s one complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S & F in repair PTMT shelf fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 300 gms)

S&F for PVC cabinet size 450x600mm with looking mirror in white colour complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed.

Supply and fixing as in replacement 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with GI hook including complete all as specified and directed.

All as per Item No. 38 above but 75 mm dia pipe

S & F for 110mm bore PVC (SWR), junction single, (Single T) equal or unequal provided with access door at any height complete all as specfied and directed.

Supply and fixing for 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls, ceiling, floor, etc. and suitable working platform upto 12 storey of bldg complete all as specified and directed.

S&F for CPVC 20mm bore Brass elbow complete all as specified and as directed

S&F for CPVC 20mm bore Brass Tee complete all as specified and as directed

S&F for CPVC 20mm bore MTA/ MBTA complete all as specified and as directed

S&F for CPVC 20mm bore FTA/ FBTA complete all as specified and as directed

Supply and fixing for 20mm bore Gun metal gate valve with iron wheel head and gun metal spindle screwed both ends after and including taking down old unserviceable valve complete all as specified and as directed by the Engr-in-Charge.

Supply, hoisting and fixing in proper position 500 ltr capacity ISI marked multi-layer rotational moulded polyethylene water storage tank (cylindrical vertical with closed top), with connecting to solar water heating system after and including dismantling of existing unserviceable water storage tanks (upto 12 storey of bldg) complete all as specified and directed.

All as per item No 48 here-in-before but 1000 ltr capacity

Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc including necessary scaffoldings complete all as specified and directed.

M&L for rendering 10mm thick with cement mortar (1:3) on fair faces of ceiling and finish smooth without using extra cement including necessary scaffoldings complete all as specfied and directed.

M&L for rendering 15mm thick with CM (1:6) on of brick work or concrete surfaces finished the surface even and smooth without using extra cement including necessary scaffoldings complete all as specified and as directed.

All as per item No. 52 but in CM (1:4) complete all as specified and as directed.

M&L for two coats of cement base paint over a coat of primer on newly plastered surface including preparation of surface and including necessary arrangement for working platform complete all as specified and directed (upto 12 storey bldg).

Material & Labour for two coats of acrylic distemper over one coat of primer on new or previously untreated plastered surfaces incl preparation of surface and incl necessary arrangement for working platform complete all as specified and directed (upto 12 storey bldg).

M&L for preparation of new or previously untreated surfaces of wall and applying three coats of white wash including necessary arrangement for working platform complete all as specified and directed (upto 12 storey bldg).

All as per item No 56 above but on ceiling

M&L for one coat of acrylic distemper on old decorated surface of internal walls including preparation and necessary arrangement for working platform complete all as specified and directed (upto 12 storey bldg).

M&L for one coat of synthetic enamelled paint on old decorated wooden/steel surface exc 10cm width or girth including preparation and necessary arrangement for working platform complete all as specified and directed (upto 12 storey bldg).

Taking down chokhat with shutter( without taking down shutters from the frame) n.exc 1.5 sqm all as specified and directed.

S&F for factory made solid panel PVC door frame of size 50mmx47mm out of 5mm plain colour PVC sheet reinforced with M.S. square tube, all as per specification and drawing.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for top rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site as per specification and drawing.

S&F for stainless steel butt hinges 100mm size

S&F for 150mm long extruded aluminium alloy handles, fabricated type, anodised.

S&F for 150mm long aluminium anodised barrel tower bolts of extruded section.

S&F for 200mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy and fixed.

Supply and fixing for 3mm thick sheet glass , ordinary quality and glazing with oil putty in square n.exe 0.50 Sqm in each pane after and including hacking out broken glass from wooden/metal frame complete all as specified and directed.

Supply and fixing for 3mm thick figured glass, pin headed type and glazing with oil putty in square n.exe 0.50 Sqm in each pane after and including hacking out broken glass from wooden/metal frame complete all as specified and directed.

Supply and fix in replacement stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete all as specified and directed.

M & L for 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

Supply and fixing in repair magnetic catcher for shutter complete all as specified and directed.

Supply and fixing in repair 25mm dia knob for shutter complete all as specified and directed.

Supply and fixing in repair 30mm size continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

Supply and fixing in repair aluminium channel for sliding glass door complete all as specified and directed.

Taking down, strip opening, cleaning all parts and packing of ceiling fan/ exhaust fan of any make and size and greasing ball bearing with specified quality grease and re-assembling the ceiling fan as a one unit, complete all as specified. Note : Replacement of spare parts, rewinding, painting, cable for connection etc to be measured and paid separately under relevant items of BOQ.

Material & Labour for hanging/fixing ceiling fan/exhaust fan in position and re-commissioning the same including making electric connection complete all as specified and directed.

Repairing / testing ceiling fan 1200/1400 mm sweep including rewinding, bush, bearing and fan blade suitable for 240V, ISI marked, 50HZ with regulator complete with all accessories and connection as per manufacturer instruction complete as directed . Note (a)- All fans shall be 1.5 Sq mm copper cunductor multicore twin twisted wire of 01 Mtr length (Note (b): Spare parts shall be measured and paid separately . )

Supply only capacitor of capacity 2.5/4 mfd complete all as specified and directed.

Supply only gun metal bush suitable for any type of fan complete all as specified and directed.

Supply only ball bearing of No. 6200/ 6201/ 6202/ 6203 complete all as specified and directed.

Repairing / testing exhaust fan upto 600 mm sweep including rewinding, bush, bearing and fan blade suitable for 240V, ISI marked, 50HZ with all accessories and connection as per manufacturer instruction complete as directed . Note-(a)) All fans shall be 1.5 Sq mm copper cunductor multicore twin twisted wire of 01 Mtr length (Note: (b)) Spare parts shall be measured and paid separately . )

Supply and fix ceiling fan complete with with down rod and all accessories 230 V 50 Hz single phase AC supply 1200 mm sweep ,white color with provision of 3 core 1.0 Sq mm cable from ceiling rose to fan including depositing old fan to MES store yard of AGE(/M)-1 marking complete all as specified and as directed. Make: Havells Model No. ES 50/or equivalent of Crompton/Usha/Bajaj

S&F for exhaust fan fan 230 Volt 50 Hz single phase AC supply ,300 mm sweep with louver complete with metal body powder coated with protective steel bird gaurd on wall of building having height up to G + 11 including provision of 3 core 1.0 Sq mm cable from ceiling rose to exhaust fan including depositing old fan to MES store yard of AGE(/M)-1 complete all as specified and directed. Make: Havells model : ventilair DS /or equivalent in crompton/usha/Bajaj

S & F for energy efficient 5 star rated 200 mm PVC air ventilating fan, complete with louvers and making hole to the existing wall, making good to the disturbed surface as per existing and connecting wire up to nearest ceiling rose complete all as specified and directed.

SUDHA ENTERPRISES

AUTO ELECTRICALS

M/S AVIJEET INTERNATIONAL

KWALITY CONSTRUCTION

BENGAL TRADERS

KT CONSTRUCTIONS

THE PLANTERS ENGINEERING CORPORATION