Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 CrAccepted-AOC | ₹2.9 Cr | L1 | Accepted-AOC Fin.Doc.Scrtiy Note fwd. By W.D. to T. Comite thrgh. Comisioner Appr.Note Dt., Fwd. to St.Comite. to Qlfy biders L1 Rate and ST. Comite Pased Res.No, Dt..W.O.DMC/WD/413/Dt.10/03/2026 |
| 2 | L2₹3.0 CrRejected-AOC | ₹3.0 Cr | L2 | Rejected-AOC Fin.Doc.Scrtiy Note fwd. By W.D. to T. Comite thrgh. Comisioner Appr.Note Dt., Fwd. to St.Comite. to Qlfy biders L1 Rate and ST. Comite Pased Res.No, Dt..W.O.DMC/WD/413/Dt.10/03/2026 |
Tender Value
₹2.9 Cr
EMD Value
₹2.9 L
Closing Date
17 Feb 2026, 11:00 amClosed
The Commissioner
Dhule Municipal corporation, Dhule New Administrative Building Sakri road, in front of Chhatrapati Shivaji High School, Dhule 424001
Construction of Sheltar House For Stray Dog at Awdhan Survey No.62/1, Dhule.
2026_DMCD_1276206_1
DHULE/DMC/WD/DMC Fund/128/2025-26
Open Tender
Civil Works
180 days
at Awdhan Survey No.62/1
Please refer Tender documents.
11 documents required · 11 mandatory
₹17,700
₹2.9 L
23 Apr 2026
9 Feb 2026
18 Feb 2026
9 Feb 2026
17 Feb 2026
9 Feb 2026
Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.)
Providing and laying in situ / ready mix cement concrete of M10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer)) with SCADA with Natural / VSI standard Artificial Sand)
Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete.
Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete
Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)
Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
Providing and fixing corrugated galvanised iron sheets of 0.63mm thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.(Weight of 5.5 kg/sq.m.).
Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete.
Supply,fixing and installation of 4mm thick Aluminium Composite Panel(ACP) of approved colour for external cladding in combination of solid and metallic colours,including all necessary Framework,support and complete weather sealing as per architectural drawing.The Aluminium Composite Panel(ACP) should be made out of thermoplastic core of low-density polyethylene LDPE(100%virginmix),sandwiched between two aluminium sheets of ALLOY GRADE-5000 series,each not less than 0.50 mm thick,total thickness of aluminium composite panels not to be less than 4mm,the exposed surface there of shall have Stovel acquered finishing coat not less than(26+-2) micron (containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design.The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-offf oil on the exterior face (peeloff film will in no case leave any adhesive mark over the composite panel surface after it is peeled off).The supporting frame work shall be made out of 50 mm X 25 mm X 3 mm thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900mm X 1200 mm and fixed to the building structure as per design through 50mmX50mmX5mm MS angle clamps prefixed to masonry or slab,columns with Hilti make anchor fastener screws.The fixing of panel to be done with the help of VHB tape sand screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge.(Prior permission of S.E.is necessary before inclusion of this item in estimate)
Providing and fixing white european type wall-hung pan, of size 350 mmx355 mmx 570mm concealed flush tank with floor-mounting frame installing kit and drain pipe connection set for wall hung WC, with approved make square control plates including soil pipe,vent pipe upto the out side face of wall,100 mm dia C.I.plug bend inlet pipe all fittings,cutting & making good walls, floors etc. complete.
Providing and fixing Orissa type white glazed earthen ware water closet pan of size 260 mm x 440 mm x 580 mm with approved make Slim wall hung cistern with installation kit including S or P trap with cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.
Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall
White glazed wash basin 45*30cm
Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kg/Smt.
Providing and fixing M.S. grill door 24 kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc.
Add For Royalty Charges
Add 1.00 % insurance On A
Add For GST charges 18% On A
Material testing Charges
Add 0.50 % For Plumbing
Add 0.50 % For Electrification
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.95 MB
TNo128_SheltarHouse_BOQ.pdf
Other Document • 0.22 MB
BOQ_2196186.xls
BOQ • 0.33 MB
TNo128_SheltarHouse_TForm.pdf
Tender Documents • 2.49 MB
Download all tender documents and submit your bid