Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
1 Dec 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
GE 866 EWS
GE 866 EWS CARNICOBAR PIN-913866 C/O 99APO
SPECIAL REPAIRS/ REPLACEMENT OF JUNCTION BOX, LT PANEL AND UNSERVICEABLE SOCKETS AT INS KARDIP, KAMORTA
2026_MES_798140_1
8871/E8
Open Tender
Civil Works
Item Rate
270 days
GE 866 EWS
As per tender documents
9 documents required · 9 mandatory
₹500
GE 866 EWS
₹48,000
Yes
10 Nov 2026
10 Nov 2026
8 Dec 2026
10 Nov 2026
1 Dec 2026
24 Nov 2026
10 Nov 2026 - 17 Nov 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking out old unserviceable panel board from existing position and making good of disturbed portion of floor and wall including disconnecting all cables and joints complete all as specified and as directed. | 9 | EACH JOB | - | - |
| 2 | Supply, install, test and commission of LT Control panel board, Outdoor type, double door, cubical type, padestal mounted, of suitable size, CPRI approved having, IP 65, independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of of 3.15 mm thick CRCA Sheet & MS angle iron section of 50X50X6 mm frame, front operated with locking arrangements suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with Horizontal aluminium bus bar of 200.Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / change over swicth / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories all as approved and comprising as under : The LT Panel comprising of the following:- | 1 | Each Job | - | - |
| 2.1 | (a) MCCB 100 A,415 Volts, 4Pole, 16 KA- 01 Nos- 01 Nos (Incomer)
(b) MCCB 63 A,415 Volts, 4Pole, 16 KA- 04 Nos (out Going)
(c) R Y B phase indicating lamp LED type -01 Sets of 03 Nos
(d) 3Phase Digital Volt Meters - 01 Nos
(e) 3Phase Digital Ammeter -01 Nos
(f) CT 100/5A -01 Sets of 03 Nos
(g) phaseSelector switch - 02 Nos
(h) Digital timer switch 40 amps- 01 No
(i) Aluminium Busbar 200 A with support duly Heat shrinkable PVC Sleeved- 04 nos
(j) Blank space for MountingMCCB- 01 No | - | - | - | - |
| 3 | Supply, install, test and commission of LT Control panel board, Outdoor type, double door, cubical type, padestal mounted, of suitable size, CPRI approved having, IP 65, independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of of 3.15 mm thick CRCA Sheet & MS angle iron section of 50X50X6 mm frame, front operated with locking arrangements suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with Horizontal aluminium bus bar of 400.Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / change over swicth / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories all as approved and comprising as under : The LT Panel comprising of the following:- | 1 | Each Job | - | - |
| 3.1 | (a) MCCB 3 Phase, 4 Pole 200 Amps,36kA rupturing cap,ICs = 100%Icu with adjustble thermal and fixed magnetic setting 415 volts 50 HZ AC supply - 01 Nos (Incomer)
(b) MCCB 100 A,415 Volts, 4Pole, 16 KA- 02 Nos- 02 Nos (out Going)
(c) MCCB 63 A,415 Volts, 4Pole, 16 KA- 02 Nos (out Going)
(d) R Y B phase indicating lamp LED type -01 Sets of 03 Nos
(e) 3Phase Digital Volt Meters - 01 Nos
(f) 3Phase Digital Ammeter -01 Nos
(g) CT 100/5A -01 Sets of 03 Nos
(h) phaseSelector switch - 02 Nos
(i) Digital timer switch 40 amps- 01 No
(j) Aluminium Busbar 400 A with support duly Heat shrinkable PVC Sleeved- 04 nos
(k) Blank space for MountingMCCB- 01 No | - | - | - | - |
| 4 | Supply, install, test and commission of LT Control panel board, Outdoor type, double door, cubical type, padestal mounted, of suitable size, CPRI approved having, IP 65, independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of of 3.15 mm thick CRCA Sheet & MS angle iron section of 50X50X6 mm frame, front operated with locking arrangements suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with Horizontal aluminium bus bar of 200.Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / change over swicth / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories all as approved and comprising as under : The LT Panel comprising of the following:- | 2 | Each Job | - | - |
| 4.1 | (a) MCCB 3 Phase, 4 Pole 100 Amps, 16kA rupturing cap,ICs = 100%Icu with adjustble thermal and fixed magnetic setting 415 volts 50 HZ AC supply - 01 Nos (Incomer)
(b) MCCB 63 A,415 Volts, 4Pole, 16 KA- 03 Nos
(c) MCCB 40 A,415 Volts, 4Pole, 10 KA- 08 Nos
(d) R Y B phase indicating lamp LED type -01 Sets of 03 Nos
(e) 3Phase Digital Volt Meters - 01 Nos
(f) 3Phase Digital Ammeter -01 Nos
(g) CT 100/5A -01 Sets of 03 Nos
(h) phaseSelector switch - 02 Nos
(i) Digital timer switch 40 amps- 01 No
(j) Aluminium Busbar 200 A with support duly Heat shrinkable PVC Sleeved- 04 nos
(k) Blank space for MountingMCCB- 01 No | - | - | - | - |
| 5 | Supply, install, test and commission of LT Control panel board, Outdoor type, double door, cubical type, padestal mounted, of suitable size, CPRI approved having, IP 65, independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of of 3.15 mm thick CRCA Sheet & MS angle iron section of 50X50X6 mm frame, front operated with locking arrangements suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with Horizontal aluminium bus bar of 200.Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / change over swicth / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories all as approved and comprising as under : The LT Panel comprising of the following:- | 1 | Each Job | - | - |
| 5.1 | (a) MCCB 3 Phase, 4 Pole 100 Amps, 16kA rupturing cap,ICs = 100%Icu with adjustble thermal and fixed magnetic setting 415 volts 50 HZ AC supply - 01 Nos (Incomer)
(b) MCCB 63 A,415 Volts, 4Pole, 16 KA- 06 Nos
(c) MCB 40 A,415 Volts, SPN, 10 KA- 06 Nos
(d) R Y B phase indicating lamp LED type -01 Sets of 03 Nos
(e) 3Phase Digital Volt Meters - 01 Nos
(f) 3Phase Digital Ammeter -01 Nos
(g) CT 100/5A -01 Sets of 03 Nos
(h) phaseSelector switch - 02 Nos
(i) Digital timer switch 40 amps- 01 No
(j) Aluminium Busbar 200 A with support duly Heat shrinkable PVC Sleeved- 04 nos
(k) Blank space for MountingMCCB- 01 No | - | - | - | - |
| 6 | Supply, install, test and commission of LT Control panel board, Outdoor type, double door, cubical type, padestal mounted, of suitable size, CPRI approved having, IP 65, independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of of 3.15 mm thick CRCA Sheet & MS angle iron section of 50X50X6 mm frame, front operated with locking arrangements suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with Horizontal aluminium bus bar of 400.Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / change over swicth / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories all as approved and comprising as under : The LT Panel comprising of the following:- | 1 | Each Job | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
8871TenderDocu.pdf
Tender Documents • 1.06 MB
BOQ_895357.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .