ADDITION/ALTERATION TO BUILDING NO P-129 FOR WORKSPACE OF CIVILIAN BUDGET MAIL SECTION AT INS VAJRAKOSH AND PROVISION OF GALVALUME SHED FOR ROOF AND STEEL STAIRCASE AT ADMIN BUILDING AT INS VAJRAKOSH AND PROVISION OF GALVALUME SHED/SEMICIRCULAR ARCH

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed.

M & L for non skid ceramic coloured tiles (Ist quality) 7 to 8 mm thick (Square/ rectangular), area of each tile exc 0.11 Sqm but n.exc 0.18 sqm as in floors etc laid over and including 15mm thick screed bed in CM 1:4 and set and jointed in neat grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for non skid ceramic coloured tiles (Ist quality) 7 to 8 mm thick (Square/ rectangular), area of each tile exc 0.11 Sqm but n.exc 0.18 sqm as in skirting set and jointed in neat cement slurry and pointed in colour cement over 10 mm thick rendering in cement mortar 1:4 etc complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 300x200mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 etc complete all as specified and directed

S&F Rotational moulded PVC, double layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, complete all as specified.

S & F 20 mm dia Ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, ISI marked (Minimum weight 210 gms), screwed & suitable for iron pipe 20 mm bore, complete all as specified.

S&F 20 mm dia gun- metal globe or gate valves, with iron wheel head screwed both ends for iron pipe & fixed in repair, complete all as specified and as directed.

Supplying and laying of CPVC pipes of 16 mm dia SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of CPVC pipes of dia 20 mm SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of CPVC pipes of dia 25 mm SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed.

S&F Pillar taps cast copper alloy fancy type chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore all as specified and directed.

S&F for grating doom 125mm dia with waste hole of PTMT (minium weight 40gms) for Nahani trap complete all as specified and directed.

S&F wash basins vitreous china , flat back size 550x400 mm white excluding taps,waste chain and plug and porcelain stopper but including barackets all as directed.

S&F for Aluminium anodised tubular towel rail 20mm dia complete all as specified and directed.

S&F brackets for towel rail / curtain rod with screws and wooden plugs complete all as specified and directed.

Taking down cement plaster on brick walls/ concrete surface, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for 10 mm thick cement plaster in CM (1:6) on fair faces of brick work incl finished even and smooth without using extra cement complete all as specified and directed.

M&L for two coats of oil bound distemper on newly plastered surfaces of wall including preparation of surfaces, complete all as spfd and directed.

M & L for preparation of old decorated surfaces of walls of any description and applying one coat of acrylic washable distemper complete all as specified and directed.

M & L for applying one coat of white wash on old decorated surfaces of ceiling including preparation of surfaces all as specified and directed.

M & L preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed

S&F for powder coated Aluminium frames for doors, windows, ventilators and sections etc with one or more rebates including jointing cleats,glazing clips, rubber neoprene packing for fixing etc complete all as specified and directed.

S&F for powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium snap beading screws etc. complete all as specified and directed.

M&L for prelaminated particle board 12 mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws in aluminium frame work all as specified & directed

M & L for Sheet glass 4.8 mm thick, ordinary quality and glazing with glazing clips, rubber neoprene packing in square not exc 0.5 sq.m in each pane complete all as specified and directed.

S&F Aluminium (extruded section) body, door closer, hydraulically regulated designation No.3,universal type,suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and directed.

S&F in Mortice locks Brass vertical type size 100mm 4 levers brass chromium plated with keys in duplicate all as specified and directed

S&F for 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed

S&F for 100mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed

S&F for Parliament hinges, mild steel cold rolled Width of recess between flanges (when open) in 100mm complete all as specified and directed

S&F for Aluminium handles(150mm long), cast type, anodised complete all as specified and directed

M & L for providing precast cement concrete block masonary with solid blocks exc 10cm width, type C-1, using 20mm graded stone aggregate and set in cement mortar (1:6) completeall as specified and directed.

M&L rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or conrete surfaces finished even & smooth without using extra cement all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS:1161-1998 grade St-240 complete all as specified and directed by Engr-in-Charge.

S&F for stairs (framed) including stringers, treades, landing, balusters, hand rails etc and incl cleats, brakets, steel, sheeting or other covering, running rails and guiders hanging also fastening and fixing complete. (Fe 410W Gde-E-250) quality-A complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L for plain cement concrete 1:4:8 type-D2 using 40mm graded stone aggregate as in foundation & filling in Mass concrete complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of new steel surfaces of any description exc 10cm in width or girth complete all as specified.

S&F Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia 100mm size complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls as rain water pipes all as specified and directed.

S&F 110mm dia PVC (SWR) bends complete all as specified and directed.

M&L for Mild steel sheet eaves gutters 1mm thick of dia 150mm, galvanised class 3 half round with rounded edges complete all as specified and directed.

Excavating in post holes (or similar holes) in Hard/dense soil each not exceeding 0.5 cum, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in foundation & filling in Mass concrete complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50m and making good surface at a level not exceeding. 1.5m above the starting point complete all as specified and directed.

M&L for surface point wiring 1100 Volts grade 1.5 Sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC casing caping/existing medium grade of suitable size with all accessories in wall/ceiling /floor/roof etc, sunk pressed steel or cast iron terminal boxes with 3mm thick plastic laminated sheet top cover including 1.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multistranded copper conductor conforming to IS:694:1990 with ISI marking as continuous earth wire connected to common earth dolly for One light/fan point controlled by one switch complete all as specified and directed.

All as per item No 49 mentioned here-in-before but for One 3 pin 5 amp socket outlet on independent board complete all as specified.

All as per item No 49 mentioned here-in-before but for one three pin socket outlet 5amps on the same board complete all as specified.

M&L for point wiring complete for one socket outlet 15 amps on an independent board with FRLS, PVC insulated and unsheathed cable 4 Sqmm (nominal area) multi stranded copper conductor single core conforming to IS: 694 including PVC casing caping pressed steel terminal boxes not less than 2 mm thick of required size (factory made) including painting terminal boxes inside and outside with two coats of synthetic enamel paint over a coat of red oxide primer and with top cover 3mm thick of plastic laminated sheets of required colour, complete with all accessories and all as specified including FRLS PVC insulated and sheathed cable 4 Sqmm (nominal area) multi stranded copper conductor single core conforming to IS: 694 of green colour as earth wire to common earth and connected to earth dolly complete all as specified and directed.

M&L for surface point wiring 1100 Volts grade 1.5 Sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC conduit medium grade of suitable size with all accessories in wall/ceiling /floor/roof etc, sunk pressed steel or cast iron terminal boxes with 3mm thick plastic laminated sheet top cover including 1.5 Sqmm PVC insulated FRLS unsheathed 1100 Volts multistranded copper conductor conforming to IS:694:1990 with ISI marking as continuous earth wire connected to common earth dolly for One light/fan point controlled by one switch complete all as specified and directed.

All as per item No 53 mentioned here-in-before but for one three pin socket outlet 5amps on the same board with other switches complete all as specified.

M&L for surface point wiring 1100 Volts grade 4 Sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and PVC conduit medium grade with all accessories on surface of wall/ceiling /floor/roof etc, sunk pressed steel or PVC terminal boxes with 3mm thick plastic laminated sheet top cover including 4 Sqmm PVC insulated FRLS unsheathed 1100 Volts multistranded copper conductor conforming to IS:694:1990 with ISI marking as continuous earth wire connected to common earth dolly for 3 pin socket outlet 15 Amps on independent board including connecting up and testing, all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Note: The rate quoted also includes the provision of suitable downrods and other components for the proper fixing of the fans and also making good disturbed surfaces by carrying out required plaster/PCC works.

Supply & Fixing in replacement for submain wiring with 4 run of 10 sqmm single core copper conductor PVC insulated cable and 1 run of 10 sqmm single core copper conductor insulated cable as earthing lead drawn through existing PVC conduit all as directed. Note:4 run of 10 sqmm cable and 1 run of 10 sqmm cable together will be measured as one unit length.

M & L in replacement for switch Piano 6 Amps one way flush type, make, ISI marked, all as specified and directed.

Supply and fix in replacement socket 6 Amp , ISI marked complete all as specified and directed.

Supply & Fix in replacement for switch socket combination outlet 5 in 1, 6A/16 Amps flush type multipurpose, make ISI marked, complete all as specified and directed.

M & L in replacement for Ceiling rose of PVC/ polycarbonate material with isolated body complete as directed by Engr-in Charge.Note: The rate also includes making good disturbed surfaces at the place of fixing ceiling rose.

Supply and fixing in replacement LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified.

Supply & Fixing in replacement of sheet metal enclosure MCB DB SPN 16 WAY double door with 200 amps rated bus bar as specified and directed. Note: The rate quoted includes the fixing of the SPN DB onto the walls/any surface directed by Engr-in-charge and making good disturbed surface by carrying out required PCC/plaster work complete.

Supply & fixing in replacement of sheet metal enclosure vertical type MCB DB TPN 4 ways double door type including busbar of rating 200 Amps as specified and directed. Note: The rate quoted includes the fixing of the VTPN onto the walls/any surface directed by Engr-in-charge and making good disturbed surface by carrying out required PCC/plaster work complete.

Supply and fixing in replacement 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN and current carrying capacity of 40 to 100 Amps in the DB complete with connection testing and commissioning all as specified and directed.

Supply and fixing in replacement amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

Supply and fixing in replacement amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

Supply and fix switch piano flush button single pole one way 5 amps complete all as specified and directed.

Supply and fix switch socket combination outlet 2 in 1, 3 pin, flush piano type universal 15 amps controlled by one switch on independent board complete all as specified and directed..

Supply and fix ceiling rose on PVC square Blocks surface bakelite 2 terminal complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed

Supply and fixing LED flood lights with cast Alu Housing, toughened glass cover 70 watt , 230 Volts, completed with all connected accessories including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200Amps rated busbar with neutral link, 4 ways, SPN QVE Serics , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed by Engr-in-Charge.

Supply and fix MCB SP 240V, 10 KA, C Series of 05 to 32 amps complete with all as specified and directed.

Supply and fix MCB SPN 240V, 10 KA, C Series of 32 amps complete with all as specified and directed..

M&L for submain wiring with PVC insulated unsheathed copper conductor FRLS multi stranded, single core 1100V grade 2 x 4.0 sqmm complete drawn in and includindg medium grade rigid PVC conduit and its accessories along with 1x 2.5 sqmm PVC insulated unsheathed copper conductor multi stranded single core copper cable for continuous earth wire and duly connected to common earth complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 600×600×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.

M&L for earthing complete with galvanized steel earth plate 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron strip 25×4mm as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanized iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade suitable/32 mm bore for protection of GI wire from earth electrode to and including the earth test point of galvanized Iron/steel of size 75 x 75 x 25 mm, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B-1 chamber and MS angle iron frame 40 x 40 x 3 mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia, GI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate No. 3 of SSR Part I of 2009 and connected to earth test point including testing complete all as specified & directed.

royal infra builders and consultants