Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.5 LAccepted-AOC FLAT NO 203 SEC 14 PLOT NO 142 SHIVSRUTI PARK APARTMENT E WING 1ST FLOOR MOSHI PRADHIKARAN TAL HAVELI DIST PUNE 412 105 | PUNE | MAHARASHTRA | 412105 | L1 | Accepted-AOC Being overall reasonable | |
| 2 | L2₹29.1 L+₹3.1 L (11.7%)Rejected-Finance 02 PADRI SHIV NAGAR SHIV NAGAR MAHARAJGANJ UTTAR PRADESH 273303 | MAHARAJGANJ | UTTAR PRADESH | 273303 | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹35.4 L+₹9.3 L (35.7%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹43.5 L+₹17.4 L (66.9%)Rejected-Finance 24 25 MANGAL ARCADE TELCO ROAD OPP HOTEL DOUBLE TREE MOHAN NAGAR CHINCHWAD PUNE 411019 | PUNE | MAHARASHTRA | 411019 | L4 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
21 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KIRKEE
GE CENTRAL KIRKEE RANGE HILLS ROAD KIRKEE PUNE-411003
REPAIRS AND MAINTENANCE TO WATER SUPPLY DISTRIBUTION SYSTEM AND ALLIED WORKS AT CENTRAL AREA UNDER AGE EM I AT GE CENTRAL KIRKEE
2022_MES_565257_1
8712/E8 OF 2022-2023
Open Tender
Pipes and Pipe related activities
Item Rate
180 days
CENTRAL area
Class D Category a(ii)
7 documents required · 7 mandatory
₹500
Yes
GE CENTRAL KIRKEE
₹80,000
Yes
6 Jan 2023
25 Nov 2022
23 Dec 2022
25 Nov 2022
21 Dec 2022
9 Dec 2022
25 Nov 2022 - 8 Dec 2022
Amount
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for laying of pipes etc and getting out in soft / loose soil complete all as specified and directed.
Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for laying of pipes etc and getting out in road cuttings/hard dense soil complete all as specified and as directed.
Removing surplus soil to a distance n.exc. 50 mtr and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified and as directed.
Returning, filling in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and as directed.
Taking up CI/DI Pipe line (including all fittings) 80mm bore dia of pipe with spigot and socket ends from trenches complete all as psecified and as directed.
All as per Sl Item No.5 above but size of pipe 100 mm bore
All as per Sl Item No.5 above but size of pipe 150 mm bore
All as per Sl Item No.5 above but size of pipe 200 mm bore
All as per Sl Item No.5 above but size of pipe 250 mm bore
All as per Sl Item No.5 above but size of pipe 300 mm bore
Cutting cast iron pipes in position for insertion of fittings, mechanical joints, replacement of pipes etc for bore of pipe 80mm complete all as specified and as directed.
All as per Sl Item No.11 above but 100 bore pipe.
All as per Sl Item No.11 above but 150 bore pipe.
All as per Sl Item No.11 above but 200 bore pipe.
All as per Sl Item No.11 above but 250 bore pipe.
All as per Sl Item No.11 above but 300 bore pipe.
Material and labour for Ductile iron fittings such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc.), Tee piece, single branch 'Y' junction, double branch, collar etc., caps and plugs etc. as per IS: 9523-2000 of class K-7, with internal cement mortor lining, and external zinc and black bitumen coated of dia upto 150 mm bore complete all as specified and as directed
Material and labour for Ductile iron fittings such as bends (any type, radius and angle), tapers any type (straight, bend, incresing, decreasing or double socket etc.), Tee piece, single branch 'Y'junction double branch, collar etc., caps and plugs etc. as per IS: 9523-2000 of class K-7, with internal cement mortor lining, and external zinc and black bitumen coated of dia upto 200 to 300mm bore complete all as specified and directed
Supply, laying, jointing and testing Ductile iron pipes, K7 class with spigot and socket, suitable for push on rubber joints, with internal cement mortor lining, and external zinc and black bitumen coated pipes in any lengths conforming to IS:8329-2000 including rubber gasket & joints as per IS:9523-2000 laid in trenches/ road/ ducts/ foot path/ on wall/ on floor locations for 100 mm bore dia pipe complete all as specified and directed. MAKE :- Electro steel/Jindal Saw /
All as per Sl Item No.19 above but 150 mm bore pipes.
All as per Sl Item No.19 above but 200 mm bore pipes.
All as per Sl Item No.19 above but 250 mm bore pipes.
All as per Sl Item No.19 above but 300 mm bore pipes.
Material and labour for taking up worn out GI steel tubing including all fitings from trenches of 15 mm bore complete all as specified and as directed.
All as per Sl Item No.24 above but 20 mm bore pipes.
All as per Sl Item No.24 above but 25 mm bore pipes.
All as per Sl Item No.24 above but 40 mm to 50 mm bore pipes.
All as per Sl Item No.24 above but 80 mm bore pipes.
All as per Sl Item No.24 above but 100 mm bore pipes.
All as per Sl Item No.24 above but 150 mm bore pipes.
Material and labour galvanised steel water tubing 15 mm bore, medium grade, laid in trenches / fixed to wall with and including all medium grade fittings complete all as specified and as directed. MAKE :- Tata/Jindal/ Zenith
All as per Sl Item No.31 above but 20 mm bore pipes.
All as per Sl Item No.31 above but 25 mm bore pipes.
All as per Sl Item No.31 above but 40 mm bore pipes.
All as per Sl Item No.31 above but 50 mm bore pipes.
All as per Sl Item No.31 above but 80 mm bore pipes.
All as per Sl Item No.31 above but 100 mm bore pipes.
All as per Sl Item No.31 above but 150 mm bore pipes.
Supply and fix in repairs CI Sluice valve with resilient sealed sluice valve cast iron wheel, of size 80 mm bore, class PN-1.6 with SS spindle with SS nut, both ends flanged confirming to IS-1538 with standard bolts hole, fixing with nuts, bolts, washers, rubber gasket etc complete in position of pipe line all as specified and directed. MAKE :-: CAIR or its equivalent
All as per Sl Item No.39 above but 100 mm bore
All as per Sl Item No.39 above but 150 mm bore
All as per Sl Item No.39 above but 200 mm bore
All as per Sl Item No.39 above but 250 mm bore
All as per Sl Item No.39 above but 300 mm bore
Supply and fix in repairs cast iron twin globe air release valve with resilient sealed of size 100 mm dia flanged, confirming to IS-1538 including fittings as required at site, making necessary modification/ arrangements on CI/MS/DI pipeline of any bore complete all as specified and directed. MAKE :- CAIR or its equivalent
Supply and fix in repairs gun metal gate valve with iron wheel head, screwed both ends for iron pipes 15mm bore complete all as specified and as directed. MAKE :- Zoloto or its equivalent.
All as per Sl Item No.46 above but 20 mm bore
All as per Sl Item No.46 above but 25 mm bore
All as per Sl Item No.46 above but 40 mm bore
All as per Sl Item No.46 above but 50 mm bore
All as per Sl Item No.46 above but 80 mm bore
Supply and fix in repairs Cast iron swing check non return valve with resilient seated confirming to IS : 1538, both ends flanged with rubber gasket, nuts, bolts & washers of sizes 100 to150 mm bore complete all as specified and as directed. MAKE :- CAIR or its equivalent
All as per Sl Item No.52 above but 80 mm bore.
Supply and fix in repairs cast Iron foot valve confirming to IS : 4038 flanged end with rubber gasket, nuts, bolts & washers of size 80mm bore complete all as specified and as directed. MAKE :- Normex/Kirloskar
All as per Sl Item No.54 above but 65 mm bore
All as per Sl Item No.54 above but 50 mm bore
Supply and fix MS mechanical joint with rubber washer, mild steel screw bolts (machine made) with screwed both ends of dia as per flange hole and required length each screwed end to be fitted with washers and one hexagonal nut suitable for bore of pipe 80mm complete all as specified and as directed.
All as per Sl Item No.57 above but 100 mm bore.
All as per Sl Item No.57 above but 150 mm bore.
All as per Sl Item No.57 above but 200 mm bore.
All as per Sl Item No.57 above but 250 mm bore.
All as per Sl Item No.57 above but 300 mm bore.
Material and labour for plain cement concrete, (1:2:4) type B1 block masonry over 10 cm in width built in cement mortar (1:6) complete all as specified and as directed including demolition of un serviceable precast concrete block walling built in cement mortor all as specified and as directed.
Material and labour for cement plaster 10mm thick in CM(1:4) on fair faces of brick work or concrete surfaces finished even and fair including taking down plaster any description, racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
Material and labour for plain cement concrete (1:3:6), type C2, using 40mm graded stone aggregate as in foundation, filling and mass concrete including necessary form work werever required and including demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.
Material and labour for mild steel framed work with ends of bars shouldered, welded or riveted or forced into spikes, framed guard bars, ladders, framed balusters, walk ways, railings, gates, frame work of water tank, valve pit and similar work confirming to Fe.290.Gde-E-165 including painting with one coat of red oxide primer and two coats of anticorrosive black bituminous paint including dismantling mild steel work of any description not otherwise specially provided for complete all as specified and as directed.
Material and labour for one coat of synthetic enamel paint to old steel surfaces of any description, including preparation of surfaces, for area over 10cm in width or girth,not otherwise described as per specified colour code complete all as specified and as directed.
Material and labour for preparation of plastered or unplastered surfaces of wall and applying one coat of cement based paint of approved tint complete all as specified and as directed.
Material and labour for preparation of plastered or unplastered surfaces of wall and applying two coats of cement based paint of approved tint over a coat of primer complete all as specified and as directed.
Material and labour for plain cement concrete type B2,(1:2:4), using 40 mm graded stone aggregate as in sub base 75 mm thick complete all as specified and as directed.
Supply and fix 80 mm thick machine pressed precast concrete rubber moulded coloured interlocking paver blocks with coloured cement and pigment any shape and size confirming to IS-15658-2006 M-40 grade laid over 50 mm thick sand cushionining complete all as specified and as directed.
Supply and fix hot dipped galvanized chain link fencing with zinc coating, nominal height-2400mm, Pitch-50mm and wire dia 3.15 mm. (approx weight-2.55 Kg /Sqm) complete all as specified and as directed.
Material and labour for mild steel work of angle fixed independently for fencing post and others confirming to Gde Fe 410-A including cutting to dead end length where required, notching, drilling, fitting and/or welding or connecting with bolts and nuts including dismantling / taking down un serviceable one complete all as specified and as directed.
Material and labour for TMT steel bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends or as in horizontal bar for fixing in fencing and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securingwith clips complete for support of chain link fencing including dismantling / taking down un serviceable one complete all as specified and as directed.
Dismantling taking out complete pump of any type, capacity 5 HP to 15 HP of different models from foundation including dismantling suction and delivery pipe connection from pump, carrying to work shop & back and repair/overhauling complete and reassemble and fixing to original position after repair/overhauling with nuts, bolts, washers, pipe connection complete including testing, commissioning all as specified and as directed. NOTE :- (i) Spares required for the repairs will be measured and paid under respective items. (ii) Small items such as gaskets, nuts,bolts and washers,screws, consumable like grease etc will be deemed to included in quoted rates.
Supply only ball bearing of size 6309 (DE) complete all as specified and as directed.
Supply only ball bearing of size 6309 (NDE) complete all as specified and as directed.
Supply only CI impeller of existing size for pump complete all as specified and as directed.
Supply only pump shaft of existing size for pump complete all as specified and as directed.
Supply only Lantern Ring of existing size for pump complete all as specified and as directed.
Supply only Mechanical seal of existing size for pump complete all as specified and as directed.
Supply only water deflector of existing size for pump complete all as specified and as directed.
Supply only pump Sleeves of existing size complete all as specified and as directed.
Supply only key for pump impeller of existing size complete all as specified and as directed.
Supply only gland packing suitable for existing pump set complete all as specified and as directed.
Dismantling taking out induction motor 05 HP to15 HP from foundation by removing electric connections, coupling carefully and carrying to work shop & back for repairs /rewinding complete, reassemble and fixing to original position after repairs/over hauling with nuts, bolts, washers, pipe connection and cable connection complete including testing, commissioning, proper alignment complete all as specified and as directed.
Material and labour for complete rewinding of motor any type after cutting, taking out old damaged winding from stator core, cleaning of slots, providing proper insulating materials/lock strip in the slots, rewinding with existing size of super enamelled coper wire, required binding, bonding, insulation, varnishing and drying and proper testing after rewinding for the sizes of motor capacity 05 HP to 7.5 HP complete all as specified and as directed.
Material and labour for complete rewinding of motor any type after cutting, taking out old damaged winding from stator core, cleaning of slots, providing proper insulating materials/lock strip in the slots, rewinding with existing size of super enamelled coper wire, required binding, bonding, insulation, varnishing and drying and proper testing after rewinding for the sizes of motor capacity 10 HP to 15 HP complete all as specified and as directed.
Repairs / maintenance / overhauling in situ of pump starter panel by dismantling taking out old damaged panel wiring, replacement of contactor, relays, timer, push buttion, single phase preventor, voltmeter, ammeter, LED indicator and other miscellenious items as required and testing complete after completion of work. NOTE :- Spares required for the repairs will be measured and paid under respective items of the schedile.
Supply only AC contactor, 3 pole, 3 ph, 415V, AC, 50Hz, type- ML-2 to ML-5 complete all as specified and as directed. MAKE :- L&T/ABB/C&S
Supply only AC side mounting add on aux contact block for contactor complete all as specified and as directed. MAKE :- L&T, or equivalent of Schneider/ABB/C&S
Supply only AC front add on aux contact block complete all as specified and as directed. MAKE :- L&T, or equivalent of Schneider/ABB/C&S
Supply only thermal overload relays, relay range 9 Amps to 15 Amps as applicable complete all as specified and as directed. MAKE :- L&T or equivelent of Schneider / ABB / Crompton / C&S
Supply only electronic timer, 3 - 30 Sec 415V complete all as specified and as directed. MAKE :- L&T, or equivalent of Schneider/C&S/Minilac
Supply only Motor protection relay, O/L range 1.2 Amps, complete all as specified and as directed. MAKE :- L&T or equivalent of Schneider / ABB / Crompton / C&S
Supply only Single phase preventor relay, complete all as specified and as directed. MAKE :- L&T or equivalent of Schneider/ABB/C&S /Minilac
Supply only LED indicator R-Y-B complete all as specified and as directed.
Supply only Starter Push button Red/green complete all as specified and as directed.
Supply only voltmeter 440 volt complete all as specified and as directed.
Supply only ammeter 440 volt complete all as specified and as directed.
Supply and fix in repairs star delta starter suitable for pump set of capacity upto 10 HP complete all as specified and as directed. MAKE :- L&T/BCH
Supply and fix in repairs star delta starter suitable for pump set of capacity upto 20 HP complete all as specified and as directed. MAKE :- L&T/BCH
Material and labour for submerisible flat copper conductor cable of size 3 core 10 sq.mm 1100 volts grade complete all as sppecified and directed by Engineer in charge. MAKE :- Finolex/Anchor
Repairs/ maintenance of unserviceble submersible pump set of 15 HP capacity by lifting from UG sump, dismantling and strip opening of 3 phase 415 volts, AC submersible pump set, transporting the pumping set to workshop for repairs including replacement of unserviceable parts of pump such as GM impeller, neck ring, bowl assembly, bushes, coupling, lock, sand cap, CI intermediate bowl, S/S pump shaft etc including testing at site on full load complete all as sepecified and as directed by Engr in charge. NOTE :- (i) The defective parts such as pump shaft, impeller, neck ring, coupling, lock, gun metal bushes, sand cap etc will be measured and paid separately under respective items. ii) Quoted rates for repairs, servicing, complete checking, machine work what ever cutting, grinding, polishing and transportation from site to workshop and back are deemed to be included in the quoted rates. iii) Delivery pipe of pump is GI pipe and Quoted Rates shall be inclusive of removing and refixing of GI pipe.
Supply and fix pump shaft stainless steel sleeve suitable size 15HP submersible pump complete all as specified and as directed.
Supply and fix Impeller bronze/gun metal of suitable for 15HP submersible pumps.
Supply and fix neck ring gun metal of suitable size for 15HP complete all as specified and as directed.
Supply and fix Gun metal bowl bushes suitable for submersible pump of 15 HP complete all as specified and as directed.
Supply and fix cast iron suction /discharge case bowl of suitable size for 15HP complete all as specified and as directed.
Supply and fix sand capy of suitable size for 15HP submersible pump set complete all as specified and as directed.
Supply and fix Cast Iron intermediate bowl of suitable size for 15HP submersible pump set complete all as specified and as directed.
Repair/servicing of unserviceble submersible motor of 15HP, 3 phase 415volts by lifting from UG sump,transporting to workshop,dismantling and strip opening re-winding with PVC insulated supperior quality water proof copper winding wire of suitable size/gauge and nos of turns including replacement of insulating materials incl new submersible cable of suitable size for connection from motor to outside upto a length of 1.5 mtrs and reassembling including testing at site on full load complete all as sepecified and directed by Engr in charge. NOTE :- I. The defective parts such as Thrust plate/bearing/sleev/pad/bush end etc will be measured and paid separately under relevant items as. II. Rates for repair,servicing,complete checking, machine work what ever is reqd cutting,grinding etc complete and transportation from site to workshop and backs are deemed to be included in the quoted rate.
Supply and replacement of thrust plate suitable for submersible motor 15 HP complete all as specified and as directed.
Supply and replacement of thrust pad suitable for submersible motor 15 HP complete all as specified and as directed.
Supply and replacement of bearing suitable for submersible motor 15 HP complete all as specified and as directed.
Supply and replacement of bush suitable for submersible motor 15 HP
Material and labour for cleaning of MES water supply installations / campus at MG Road other than the scope considered in outsourcing by surface dressing or trimming of natural ground to remove small unequalities n.exc. 15 cm deep including removing vegetation / shrubs / brush wood / under-growth, cleaning of drains & carrying away the rubbish to a distance of n.exc 50 mtr away complete all as directed by Engineer in Charge.
All as per Sl Item No 117 above but at SFQ Pump House
All as per Sl Item No 117 above but at CAFVD Pump House
All as per Sl Item No 117 above but at Sarvatra Vihar Pump House
All as per Sl Item No 117 above but at Church Road Pump House
All as per Sl Item No 117 above but at Nirikshan Vihar Pump House
All as per Sl Item No 117 above but at KKD line Pump House
All as per Sl Item No 117 above but at Engine House Road Pump House
All as per Sl Item No 117 above but at EME line Pump House
Supply and fix Glow Sign board of size 12'-3" x 3'-2" x 1'-1" made out of acrylic sheet of 3mm thick with letters as directed at various pump house holding on 3.5 mtr height Stainless steel pipe 32 mm, height 3 mtr, providing lighting / illumination with two tuble light set and wiring upto connection point complete all as specified and as directed.
JP ENTERPRISES
AARYANS GLOBAL INDIA
metro electrical services
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .