Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.9 LAccepted-AOC | L1 | Accepted-AOC Quoted rates of lowest bidder found reasonable hence accepted | |
| 2 | L2₹10.1 L+₹21,617.58 (2.19%)Rejected-AOC | L2 | Rejected-AOC Quoted rates are high hence rejected | |
| 3 | L3₹10.4 L+₹55,715.09 (5.65%)Rejected-AOC | L3 | Rejected-AOC Quoted rates are high hence rejected | |
| 4 | L4₹10.7 L+₹79,665.18 (8.08%)Rejected-AOC | L4 | Rejected-AOC Quoted rates are high hence rejected | |
| 5 | L5₹10.9 L+₹99,923.72 (10.1%)Rejected-AOC | L5 | Rejected-AOC Quoted rates are high hence rejected |
Tender Value
₹9.7 L
EMD Value
₹19,360
Closing Date
25 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Mr GURUDAS GOLDAR, AE (CIV)
AGE (I) TAWANG Pin- 900198 C/o 99 APO
PROVN OF TEA ROOM FOR OFFICE OF CORPS INT DET AND PROVN OF 01 X FOL STORE AT PAIKHAR UNDER AGE (I) TAWANG
2023_MES_612072_1
8577/AGE(I)/TWG OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
Tawang
REFER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
AGE (I) TAWANG
₹19,360
12 Oct 2023
4 Aug 2023
1 Sept 2023
4 Aug 2023
25 Aug 2023
18 Aug 2023
4 Aug 2023 - 11 Aug 2023
Amount
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out soft/loose soil.
Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.
Returning filling in with approved excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.
Excavation in trenches, n exc 1.5m wide and n. exc 1.5m in depth, for foundation, etc or for shafts, wells, cess-pits, menholes, pier holes, poles, laying of cable, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out for soft and loose soil all as specified and directed
Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed.
Materials and Labour for Plain cement concrete (1:4:8) type D-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified.
Materials and Labour for formwork to sides of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.
Materials and Labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished square, rectangular or polygonal surfaces of concrete complete all as specified and directed
Materials and Labour for formwork to faces of sides and soffits of floor or roof beams, cantilevers, shelves including supports, overhangs, etc for rough finished flat surfaces of concrete complete all as specified and directed
Materials and Labour for reinforced cement concrete (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc; basement slabs under reamed pillars and mass concrete complete all as specified and directed. (Note: Steel reinforcement shall be measured & paid separately)
Materials and Labour for reinforced cement concrete (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggregate as in column, pillars, piers, post and struts complete all as specified and directed. (Note: Steel reinforcement shall be measured & paid separately)
Materials and Labour for reinforced cement concrete (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels complete all as specified and directed. (Note: Steel reinforcement shall be measured & paid separately)
Materials and Labour for TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.
Materials and Labour for TMT bars 8 to 10 mm dia in stirrups, spacers and binders, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed.
Materials and labour for concrete block masonry with solid precast block of plain cement concrete (1:3:6) type C1 using 20 mm graded stone aggt , exceeding 10 cm in width and setting in mortar(1:6) as in wall complete all as specified and directed.
Materials and Labour for broken stone or boulder hardcore of gauge n exe 63mm deposited, spread and levelled in layers n exe 15cm thick, watered and rammed to a true surface.
Materials and Labour for Walling of random rubble uncoursed, well bonded bedded and solidly hearted built in CM 1:6 (below ground level) complete all as specified as directed.
Materials and labour for 75 mm plain Cement Concrete (1:3:6), type C2 ( using 40 mm graded stone aggregate) finished even and smooth without using etra cement, as plinth protection/paving/footpath complete all as specified and directed.
Materials and labour for 40mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggt as in floor finished, complete all as specified and directed.
S&F glass dividing strips, 3 mm thick and 38 mm width, complete all as specified and directed.
Materials and Labour for roof trusses (framed), trussed, purlins, crane gantries, rails and fastening (Beam, tee, angle, channel or flat sections) icluding distance pieces, cleats etc, complete all as specified & directed.
Materials and Labour for Screw bolt Mild steel bolts not exc 12 mm dia of neck, purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. complete all as specified & directed.
Supply and fixing second class hard wood plain solid straight chowkhats and frame wrought framed rebated on the soild, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed.
Supply and fixing 30mm thick second class class hard wood glazed and skelton shutter, open rebated and prepared to receive glass gauze etc, divided into squares (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass exc., size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a), supplied and fitted to chowkats, complete all as specified and directed.
Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exceeding 0.50sqm in each pane , complete all as specified and directed.
Supply and fixing 30 mm thick second class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed.
Supply and fixing Mild steel butt hinges, medium weight, cold rolled 100 mm size , complete all as specified and directed.
Supply and fixing Aluminium anodized barrel tower bolts of extruded section, 125 mm long, complete all as specified and directed.
Supply and fixing Aluminium handles, cast type, anodized, 100 mm size , complete all as specified and directed.
Supply and fixing for 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
Supply and fixing MS butt hinges medium weight 75mm long, complete all as specified and directed.
Materials and labour for rendering 10mm thick in cement morter (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
Materials and labour for rendering 15mm thick in cement morter (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws , complete all as specified and directed.
Materials and labour for preparation of new plastered surfaces and applying two coats of cement based paint over a coat of cement primer on wall complete all specified and directed.
Materials and labour for two coats white washing on new plaster wall surface including preparation of plastered surfaces complete all as specified and directed.
Materials and labour for 75 mm thick plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate as in sub-base of floors complete all as specified and directed.
Materials and labour for 25 mm thick PCC (1:2:4) type B1 using 20 mm graded stone aggt as in sub bases of floor finished even and rough, complete all as specified and directed.
Materials and labour for screed bed or bedding layer of cement mortar 1:4, 15 mm thick for laying floor finishes/tiles , complete all as specified and directed.
Materials and Labour for non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.
Materials and labour for Coloured Glazed ceramic tiles in vertical surface 300x200x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified and directed.
Materials and labour for applying three coats of white wash on new wall surface including preparation of plasetered surfaces, complete all as specified and directed.
Materials and labour for two coat of cement base paint on one coat priming plastered and other surfaces with alkali resistant priming paints on new surfaces, complete all as specified and directed.
Supply and fixing 4mm thick Plywood, grade BWR, type BB, fixed with screws to timber framework deduct if fixed and nail and add if fixed in ceiling, flat of slooping complete all as specified and directed.
Materials and Labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 for roof trusses (framed), trussed, purlins, all as specifed and directed
Supply and fixing 35 mm thick second class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats, complete all as specified and directed.
Materials and labour for two coat of synthetic enamel paint alongwith red oxide zinc chrom over newly treated iron surfaces of any description, over 10cm in width or girth, complete all as specified and directed
Supply and fixing Aluminium anodized barrel tower bolts of extruded section, 100 mm long, complete all as specified and directed.
Supply and fixing Aluminium handles, cast type, anodized, 125 mm size , complete all as specified and directed.
Supply and fixing for 200mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
Materials and labour for preparing of new wooden surfaces of any description , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
Supply and fixing for Waste coupling of 32mm dia PTMT (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms), complete all as specified and directed.
Supply and fixing Stop valves 15 mm bore, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.
Supply and fixing 15mm cromium plated, Bib taps, fancy type, ISI marked with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed (weight of one bib tap shall not less than 400gm each), complete all as specified and directed.
Supply and fixing for 450mm long PVC connections 15mm size with PTMT nuts, complete all as specified and directed.
Supply and fixing for Grating round 140 mm size of PTMT. (Minimum weight 50gms), complete all as specified and directed.
Supply and fixing 20 mm outer dia 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 (PN 16), UV stablised and antimicrobial fution welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.
Supply and fixing 25 mm outer dia 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 (PN 16), UV stablised and antimicrobial fution welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.
Supply and fixing PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.
Materials and labour for concrete block masonry with solid precast block of plain cement concrete (1:3:6) type C1 using 20 mm graded stone aggt , exceeding 10 cm in width and setting in mortar(1:6) as in wall complete all as specified and directed.
Material and labour for stainless steel sink 1 mm thick for kitchen or laboratory with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union to waste pipe etc including bedding in cement mortor on to dwarf wall overall size 495x420mm with bowl size 410mm x 330mm x160mm with 40 dia mm CP waste coupling complete all as specified and directed.
Materials and labour for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC casing caping of suitable size not less than 20mm on surface of wall including provn of MS box of suitable size for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all as specified and directed.One light/fan/call bell point controlled by one switch one way 5 Amps
All as per Item No. 63 above but for One 2/3 pin socket outlet 5Amps on independent board
All as per Item No. 63 above but one switch socket combination 15 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm
Supply and fixing Switch piano, flush type, single pole, one way switch 5 Amps.
Supply and fixing Switch socket combination 2 in 1, 5 Amps flush type.
Supply and fixing Switch socket combination 2 in 1, 3 pin, 5 and 15 Amps flush type universal.
Supply and fixing Ceiling rose surface bakelite 3 terminals 65x50mm all as directed.
Supply & fixing LED light fitting 1X20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete
Supply & fixing LED street light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including complete with IP 65/66 protection complete. Make -Havells LHEXAYP7PN6K030 or equivelant of CG/Havells
Supply and fixing exhaust fan, steel body AC single phase. 230V of size 300mm sweep with blades, frame and louvers
Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.complete all as specified and directed by Engr-in-Charge.
Supply and fixing, XLPE insulated, armoured heavy duty electric cable aluminium, 1100 volts grade conductor of cross sectional area 10 Sqm 2 Core complete all as specified and directed.
S&F High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches of size 50 mm bore complete all as specified and directed.
Supply and fixing MCB distrubution board SPN 4way double door, sheet steel,phosphatised,powder coated with 200 amps bus-bar,neutral link,earth bar and din rail 240 V ,complete all as specified and directed. by engineer-in-charge.
Supply and fixing MCB Single pole & neutral 240volts 32 Amps, 10KA rupturing capacity, C series
Supply and fixing MCB Single pole, 240 volts 5 to 32 Amps 10 KA rupturing capacity, C series
Materials and labour for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC casing caping with PVC surface boxes for light/fan/socket controlled by one switch with 1.5 sqmm PVC insulated unseathed multistandard copper conductor 1100 V grade green colour for earth continuity complete all as specified and directed.
Supply and fixing house service bracket (hook type) for service cable connection complete with 3 m long GI pipe, 40 mm bore, medium grade, with two nos 90° bends, MS hook and stay or guy complete all as specified and as directed.
Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner shethering of PVC tape armoured with galvanised steel wire or tape and overall PVC shetered 10 Sqm 2 Core nominal cross section in sevice connection including taking down old unserviceable service wire complete all as specified.
Supply and fixing Single pointed air termination rod 12mm dia, 300mm long
Supply and fixing Galvanised iron 32x6mm buried in ground
Supply and fixing test terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 08mm dia 25mm long hex head screw
Supply and fixing Aluminium strip 25x3.15mm with saddles, porcelain insulator and fixing screws etc for roof conductor, steel reinforced
Materials and labour for earthing complete with galvanised steel earth plate electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, connected to galvanised earth lead strip 32x6mm by means of volts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 of SSR Part-I connected to earthing test point all as specified or indicated including excavation and connected earth work in hard/dense soil, PCC 1:3:6 type C1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15 mm bore GI medium grade earth lead protection pipe, 50mm thick RCC1:2:4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer, charcoal and testing on completion all as specified and directed
Materials and labour for earthing complete with GI earth electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground surrounded from all sides by 15cm thick and packed layer of charcoal dust and conmmon salt filling in alternate layers connected to and including GI earth wire 4.0 mm dia upto 7.5 mtr by means of bolts, nuts, check nuts and washers, and protected by light grade 20 mm dia and connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel wire mesh, RCC pit cover 50mm thick with 10mm dia reinforcement 100mm c/c and PCC chamber pit with P C C 1:2:4 Type C2 (including excavation and earth work, disposal of surplus soil to a distance not exceeding 50 metre and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009
M/S P R CONSTRUCTION
M/S D L ENTERPRISES
DEOGRATIES SEMPER AMA ASSOCIATE
M/S RINCHIN DORJEE CONSTRUCTION
MS TD CONSTRUCTION
TENZIN CONSTRUCTION
M/S KESANG CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .