GE/S(U)-73/2021-22 REPAIR TO ROOF JOINERY FLOORING CEILING PLASTERING SANITARY FITTINGS AND ALLIED SERVICES TO CHIBBER ENCLAVE KALIMATA ENCLAVE AND CERTAIN OTHER MD ACCN UNDER AGE B/R-I GE (SOUTH) UDHAMPUR

Amount

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level complete all as specified and directed.

Demolition of cement concrete (reinforced) as in roof, floors (other than ground floor), beams, staircase, landing, chajjas and similar suspended work,complete all as specified and as directed.

Dismantling asbestos corrugated or semi corrugated sheets as in roof covering including ridge etc complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members complete all as specified and directed.

Demolition of brick or stone masonary including all necessary arches, pillars, quions etc built in cement mortar complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise specified complete all as specified and directed.

Demolition of and breaking up of AC rain water pipes any dia fixed in any position complete all as specified and directed.

Taking up or down steel tubing 15mm bore including cleaning for refixing or removal to store complete all as specified and directed.

All as per item No 09 above but 20mm Bore complete all as specified and directed.

Dismantling water tank of capacity exc. 250 ltrs but n.exc. 500 ltrs complete all as specified and directed.

All as per item No 11 above but exc. 500 ltrs but n.exc. 1000 ltrs complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 bricks complete all as specified and as directed.

All as per item No 13 above but except bricks complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and as directed.

M&L for random rubble masonery built in cement mortar 1:6, uncoursed, well bonded, bedded and solidly hearted complete all as specified and as directed.

All as per Srl item No 16 above but except stones complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in surface channel and drain beds including all necessary form work complete all as specified and as directed.

Extra for forming fair finished drain or channels 30cm inner girth in cement concrete using extra cement including forms, mould, mitred/stopped ends etc complete all as specified and as directed.

M&L for Rendering 15mm thick in two layer (10+5 mm) on brick work or concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified. (Water proofing compound to be measured and paid for separately) complete all as specified and as directed.

M&L for 10mm thick rendering on fair faces of brick works in cement mortar 1:6 finished even and smooth without using extra cement in cement mortar complete all as specified and as directed.

M&L for 05 mm thick rendering on fair faces of concrete such as chajjas /ceiling finished even and smooth without using extra cement in cement mortar 1:3. (Note : Rate quoted by contractor deemed to be included for plastering chajjas to up to height of 10 mtrs ) complete all as specified and as directed.

M&L for PCC 75 mm thick type C-1, 1:3:6 using 20mm graded crushed stone aggregate as in plinth protection laid in alternate pannels finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 75 thick PCC 1:4:8 type D-2 (40 mm graded stone agg ) as in sub base complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B-0 using 20mm graded crushed stone aggregate as in sub base for laying floor finishes complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and as directed.

M&L for 20mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M&L for 10mm thick rendering on fair faces of brick works in cement mortar 1:4 finished rough for receiving tiles as in dado complete all as specified and as directed.

M&L for 7 mm to 8 mm thick non skid coloured glazed ceramic tiles (area of each tile exc 0.11 Sqm and nexc 0.18 sqm) etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments complete all as specified and as directed.

All as per item No 29 above but in vertical surfaces complete all as specified and as directed.

M&L for dark shade double charged Vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of existing surfaces complete all as specified and as directed.(Note:The contractor shall have no claim on difference what so ever on shade /colour of tile)

All as per item No 31 above but in vertical surfaces complete all as specified and as directed.

M&L for dark shade double charged Vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of existing surfaces complete all as specified and as directed.(Note:The contractor shall have no claim on difference what so ever on shade /colour of tile)

M&L for Durastone heavy duty vitrified tiles 10 mm thick Sq/rectangular tiles area of each tile not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in clooured cement to match the surface complete all as specified and as directed.(Note:The contractor shall have no claim on difference what so ever on shade /colour of tile)

All as per item No 33 above but in vertical surfaces complete all as specified and as directed.

M&L for cement concrete rich coloured chequerred tiles machine pressed with imported pigment finish (mirror/rough cast) of size (300mmx300mm or any size as app 20 to 25 mm ) thick set and jointed with neat cement slurry complete all as specified and as directed.

M&L15mm to 18mm thick granite stone slab as in shelves / vertical surfaces /platforms set and jointed in neat cement slurry, pointed in colored cement to match the shade incl rubbing of moulding etc complete all as specified and as directed.

M&L for (300 mm x 600 mm x 7 mm /450 mm x 300 mm x 7mm thick ) coloured ceramic tiles set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments in vertical surfaces complete all as specified and as directed. (Note :Contractor shall have no claim on colour or shade what so ever on this account)

M&L for Sand cushioning under floors including watering and consolidation all as specified and directed.

M&L for coloured machine pressed / vibro mechanically floated interlocking paver block glossy finish any shape and size conforming to IS - 15658-2006 of 60 mm thickness , M-35 grade ,with topping of cement mixed with imported pigment. colour and shape shall be approved by Engr-in-chatge. (Make: ULTRA/MODERN/RUCHI/ISI Marked)

Machine pressed (factory made) precast plain cement concrete 1:2:4 type B-0 (20mm graded crushed stone aggregate), kerb stone of any size , laid in trenches on edges of roads, including excavation in any type of soil, PCC bed, returning filling and removal of surplus soil to a distance n exc. 50m from the starting point , size and shape complete all as specified and directed.

M&L for rolled section /tubular section as in main and cross beams , purlins , rafters ,posts where connected to common rafter and running rails etc conforming to Fe- 410w complete all as specified and as directed.

S&F AC designer composite ceiling board 4 to 6mm thick in 600mmx600mm panel confirming to IS-14682 type-B category-3 including GI frame, holdfast & suspenders complete all as specified and directed by Engineer-in-charge. Make - Everest or equivalent.

M&L for pre painted galvalume aluminium zinc coating GI based corrugated sheets 0.60 mm thick of any colour having tensile strength of 550/MPA as in roof covering, cladding to wall fixed with self taping screws complete all as specified and as directed.

All as per Srl item No 43 above but plain sheets as in ridges complete all as specified and as directed.

S&F 6 mm thick asbestos cement corrugated sheets as in roof covering fixed with L or J hooks complete all as specified and as directed.

All as per item No 46 above but fixing only complete all as specified and as directed.

S&F 6mm thick 2 piece serrated ridge for corrugated or semi corrugated sheets fixed with L or J hooks complete all as specified and as directed.

Roughing surfaces of old concrete surfaces by picking up , sweeping,cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @3kg/Sqm mixed with water proofing compound including 20mm thick screeding in CM (1:4) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separatley) .(Note : No extra cost shall be paid to contractor in r/o any removal of existing roof treatment.) complete all as specified and as directed.

M&L for priming surfaces with bituminous primer conforming to IS-3384 @ 0.40kg/sqm, after drying of primer applying a coat of hot blown bitumen conforming to IS-702 @ 1.20 kg/sqm and laying polymeric water proofing membrane, five layered with centre core of 90 micron high molecular density polythelene film (min weight 3.5 kg per sqm) with end over laps not less than 150mm and side lap 75 mm all as directed for sunken floor treatment or painting with solar reflective paint for roof surfaces complete all as specified and as directed.

M&L Providing cement concrete in steps, seismic and other similar bands,pad parapets concrete, ets and railings up to 60 cm in hieght, coping, kneedlers apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles all as directed, 1:2:4 mix type B-0 complete all as specified and as directed.

Supply only (LW+) water proofing liquid solution of Dr fix it / sikka or equivalent make complete all as specified and as directed.

S&F MS drapery rod powder coated including brackets and necessary fitting "as in repair " directed by Engr-in-charge

S&F 110 mm bore PVC (SWR) pipe single socketed , in any length with rubber joints fixed to walls complete all as specified and as directed.

S&F 110mm bore PVC (SWR) bend any radius complete all as specified and as directed.

M&L for 15mm bore medium grade galvanished iron water tubing with all fittings and fixed complete to walls or laid in trenches complete all as specified and as directed.

All as per item No 56 above but 20mm bore complete all as specified and as directed.

S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks cylndrical with closed top hoisted and fixed in position complete all as specified and as directed.

All as per item No 58 above but 1000 ltrs capacity complete all as specified and as directed.

S&F Vitrious china wash down water closet pan (pedestal pattern ), white (excluding flushing cistern , flush pipe."as in repair " complete all as specified and as directed.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 mm x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including cast iron P trap, bore of pipe 100 mm. and provision of concrete bedding "as in repair " complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan pedestal pattern, white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seal, seat cover ,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe complete all as specified. Make Cera or equivalent.

S&F in repair Single piece EWC of size 360 x 680 x 750mm Make : Jaquar or equivalent including flushing cistern with Softclose seat cover, incl trap and necessary fittings complete all as specifed and as directed.

S&F Single Lever Basin Mixer without Popup waste and 450 mm Long Braided Hoses,Make : Jaquar or equivalent including necessary fittings complete all as specified and as directed.

S&F in repair bib Tap, fancy type, cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm complete all as specified and directed.

Supply and fixing "as in repair" stop valves/angle valve of 15 mm bore, but fancy type, chromium plated screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site complete all as specified and directed by Engr-in-Charge.

S&F Health faucet (ABS Body) with 8mm dia, 1.2 meter long flexible tube & wall hook with all accessories all as approved and fixed as in repairs complete all as specified and directed. Make : Jaguar ALD-CHR-593N

S&F Glass shelf with chromium plated guard rails Make Jaquar Cat No AQN -7771 "as in repair " complete all as specified and as directed.

S&F soap dish Make Jaquar Cat No AQN-7731"as in repair " complete all as specified and as directed.

S&F Towel ring square with round flange ..(Make Jaquar CAT PART NO :ACN-1121N) "as in repair " complete all as specified and as directed.

S&F Toilet paper holder (Make Jaquar CAT PART NO : CAN- 1151N) "as in repair " complete all as specified and as directed.

S&F corner glass shelf with chromium plated rails including brackets .(Make Jaquar Cat PART NO: ACN 1173 ) "as in repair " complete all as specified and as directed.

S&F PVC waste pipe 32mm bore with cup and washers complete. "as in repair " complete all as specified and as directed.

S&F Chromium plated 32 mm bore size full threaded with 80 mm height incl all necessry washers "as in repair " complete all as specified and as directed.

S&F 15 mm bore bib taps cast copper alloy with capstan head chromium plated screwed down screwed for iron pipe or brass ferrule. "as in repair " complete all as specified and as directed.

S&F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms / 20mm-125gms). complete all as specified and as directed. Make :- Prayag or equivalent.

S&F 15mm bore pillar tap cast copper alloy with capstan head chromium plated screwed down under high pressure with or without lettered hot or cold with long shank and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F in repairs concealed stop valve cast copper alloy fancy type chromium plated long shunk and cup screwed down high pressure with crutch or butterly handle screwed both ends for iron pipe or for unions "as in repair " complete all as specified and as directed.

S&F 15 mm bore angle valve, cast copper alloy chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs Brass CP shower rose 125mm size complete all as specified. "as in repair " complete all as specified and as directed.

S&F 20mm bore brass float valve high pressure with polythene float and fly nuts complete screwed for iron pipe or brass ferrule. "as in repair " complete all as specified and as directed.

S&F 75mm bore cast iron floor trap with grating including jointing to waster pipe fixed in cement concrete type B-1 1:2:4 "as in repair " complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches "as in repair " complete all as specified and as directed.

S&F sand cast iron 'P' or S trap 100mm bore for Ind type w/c complete all as specified and as directed.

M&L pressed steel frame of size 105 mm x 60 mm for doors with one or more rebates including necessary fittings, hungs, hinges, lock strike plate etc complete all as specified and as directed.

S&F PVC flushing cistern 10 ltrs capacity with complete in let ball valve.(Make Perryware/CERA) "as in repair " complete all as specified and as directed.

S&F viterous china wash hand basin flat back size 580 mm x 450 mm excluding traps, waste , chain , plug and porcelain stopper incl brackets "as in repair " complete all as specified and as directed.

Complete removal of existing treatment and apply 1mm thick wall care putty on wall complete all as specified and directed.

M&L for two coats of oil bound distamper on new surfaces over a coat of primer complete all as specified and as directed.

M&L for two coats cement base paint on newly plastered surfaces including preparation of surfaces complete all as specified and as directed.

M&L for three coats of white wash on newly plastered ceiling surfaces including preparation of surfaces complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on new steel surfaces including preparation over a coat of red oxide Zinc chrome primer complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on new wooden surfaces including preparation over a coat of pink primer complete all as specified and as directed.

Reinforced cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete complete all as specified and as directed.

Mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and incl mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking of shutter off shutters from frame) 1.5 sqm and n exc 4 sqm each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed by GE.

All as per item No 98 above but n.exc 1.5 sqm complete all as specified and as directed.

Taking down shutters of any description exceeding 1 square metre & not exceeding 2 square metre each complete all as specified and directed.

All as per item No 100 above but n exc 1 sqm each complete all as specified and as directed.

S&F factory made PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suitable for opening as per site condition complete all as specified and directed and as shown in SSR.

M&L for Powder coated Anodised Aluminium frames for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc complete all as specified and directed.

M & L for Powder coated aluminium anodised window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips, rubber packing, anodised aluminium snap beading screws etc. complete all as specified and directed.

S & F of Powder coated aluminium grill / guard bars to aluminium window complete all as specified and directed.

S&F 35mm thick plain framed II nd class hard wood panelled factory made shutters (two or more panel) with lock rail and panel of 12mm thick BWP commercial ply with size of rail and stiles as per IS 1003 (part-1) kiln seasoned and chemically pressure treated all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling, of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified in drawing shown in SSR and as directed.

S&F 35mm thick plain factory made second class hard wood skeleton shutters, open rebated and prepared to receive glass, guage etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered bead for securing glass etc with size of member of shutters all as specified in clause 8.24 (a) of SSR Part-I kin seasoned and chemically pressure treated all as specified and all as specified and directed and directed.

S&F mild steel, 150 mm, ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified.

M&L for Steel framed work such as grills, grating etc with ends fo bars shouldered and / or riveted or forged into spikes, framed guard bar, barred iron doors, ladder, framed balusters, railing, frame work, including locking arrangement for water tanks and similar work conforming to Fe-290 Gd E-165 complete all as specified and directed.

S&F Hard drawn steel wirefabric cut to length bent to shape required and tying, welding to the angle iron frame etc complete all as specified and directed.

S & F 35 mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

M & L for Powder coated aluminium anodised door shutter shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips, rubber packing, anodised aluminium snap beading screws etc. complete all as specified and directed. (Thickness or powder coating not less than 50 micron) complete all as specified and as directed.

S & F Aluminium body heavy duty double action floor spring suitable for glass shutter at both side rotateable complete all as specified.

S & F Aluminium door closer hydraulically regulated universal type, suitable for door shutters complete all as specified and as directed.

S&F 18/19 mm thick pre-laminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.

S&F 12 mm thick plywood grade BWR, type BB fixed with screw to timber frame work including dismantling complete all as specified and directed. Make : Green Ply/Kit Ply or quivalent.

0.90 mm thick decorative choice of lamination type 1 of surface finish, colour and pattern as approved, fixed with aproved adhesive as per manufactur's insturctions complete all as specified and directed

1.50 mm thick decorative choice of lamination type 1 of surface finish, colour and pattern as approved, fixed with aproved adhesive as per manufactur's insturctions complete all as specified and directed

S&F prelaminated particle board 18/19 mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as in kitchen cabinets/shutters fixed with screws to timber framework as in repairs all as specified and directed.

All as per item No 120 above but 12 mm thick Ply complete all as specified and as directed.

S&F continuous (Paino) hinges, stainless steel bright finish or electro-galvanized width of flap 30 mm (when open) all as specified and directed.

S & F 40 mm dia, cupboard knob fixed with nut, screw and washer of powder coated aluminium bright finished fixed in repairs all as specified and directed.

S & F hasp and staple size 100mm powder coated with hinge pin including bolt to hinge plate and fixed with screws all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames exc 1.5 sqm, glazed with putty or fixed with beads all as directed. Note: Glass will be measured and paid for separately.

M&L 3mm thick sheet glass, ordinary quality and glazing with wooden beading not exc 0.5 Sqm in each pane all as specified and directed.

M&L 3mm thick figured glass, pin head type and glazing with wooden beading, not exc 0.5 Sqm in each pane all as specified and directed.

S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and directed.

S&F as in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and directed.

S&F butt hinges 75mm sizes, extruded aluminium alloy with galvanised mild steel hinge pin anodised, type C-21 complete all as specified and directed.

All as per item No 130 above but 100mm size, type B-21 complete all as specified and as directed.

All as per item No 130 above but 125mm size complete all as specified and as directed.

S&F Aluminum alloy powder coated sliding door bolt 300 mm long and not less than 12mm dia with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section 200mm long all as specifed and directed.

All as per item No 134 herein before but 150 mm long complete all as specified and as directed.

All as per item No 134 herein before but 75 mm long complete all as specified and as directed.

S&F extruded aluminum alloy handles, fabricated type and powder coated, 100mm size complete all as specified and as directed.

All as per item No 134 herein before but 75mm complete all as specified and as directed.

S&F aluminium alloy, anodised, 150/200mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruted sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F Floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring and vulcanised rubber piece fixed in floor , over all length of cover plate 140mm complete all as specified and as directed.

S&F in repairs Mortice locks Brass vertical type size 100mm 4 levers brass chromium plated with keys in duplicate all as specified and directed.

M&L for pressed steel frame of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified supplied and fixed all as specified and directed.

S&Fmild steel articles such as bands, straps, supports or stays for rain water,holdfasts etc conforming to Fe 290 Gde- E-165 complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based material new of any description and girth not otherwise described and treated with tar or coal tar black paint complete all as specified and as directed.

M&L Extra over rates of block board or veneered particle board for external teak wood lipping 6mm thick fixed with nails in 19 mm thick board complete all as specified and as directed.

All as per item No 145 above but 12 mm thick ply complete all as specified and as directed.

M&L for two coat of synthetic enamel paint on old wooden surfaces of any description over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

M&L for One coat of synthetic enamel paint on old steel surfaces of any description over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

S&F steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and as directed. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1302/2009 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

Description all as per item No 149 here in above but without glazing bar complete all as specified. Note : (i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 (ii) MS fillets, glazing, wire gauge shall be measured and paid separately

M&L for Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and as directed.

M&L at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

S&F in repairs plain, Aluminium sheeting 0.56 mm thick , Alloy 31000 H-4 in ridges, hips, valley gutter, drip ,construction joints and straight flashing (length and girth as fixed) complete all as specified and as directed.

SODHI TRADING CORPORATION

s l sharma and sons

RAMAN CONSTRUCTION CO

SINGH CONST CO

MandeepConstructionCo