Reinvited for Renovation of LT1 near A block in University of Health Sciences Rohtak

Amount

( c) Moulded case circuit breakers (HSR 31.12)

Supply and erection of moulded case circuit breaker on wall or on existing pedstal including bounding to earth and necessary connections:-

(ii) 100 amp. To 220 amp. 415 V 10K.A. 3 phase.(Category-C)

(iii) 250 amp. 415V 35 K.A. 3 phase.(Category-C)

Supply and erection of miniature circuit breaker/isolator 240/415 V in the existing distribution board including making necessary connections :- (HSR 31.17)

(a) Miniature circuit breakers of 9 K.A. breaking capacity

(ii) 6 amp. to 32 amp. (Single pole)

(iii) 40 amp. to 63 amp.(Single pole with Neutral)

(iv) 40 amp. to 63 amp. (Triple pole with Neutral)

Earthing (HSR 31.22)

(iii) Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories and providing masonry closures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.

(v) Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode

(xix) Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size.

Supply and erection of under ground cable, loose is existing pipe or trenches complete with necessary connections(HSR 31.26)

(xxxi) 150 Sq. mm 3.5 Core Cable .(Armoured)

Wiring in existing Conduit pipe (Recessed) for Electrical points. (HSR 31.38)

Wiring only in 1.5 sqmm PVC insulated copper conductor cable in existing conduit pipe and MS boxes covered with 5mm thick backlite sheet including cost of switch, wall socket, ceiling rose etc.

(i) Fan Point

(c) Long Point

(ii) Light Point

(b) Medium Point

(c) Long Point

(viii) 3 pin15 amp. plug point with 4 sq mm PVC insulated Copper conductor cable- including earthing the 3rd. pin etc.

(c) Long Point

Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe (HSR 31.40)

(i) Size 1.5 sqmm ( 3/0.81mm )

(iii) Size 4 sqmm ( 7/0.85 mm)

(iv) Size 6 sqmm ( 7/1.05 )

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBs and ELCBs etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto to the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.41)

(III) 12-way , SP&N ( Horizontal)

(v) 4-way , TP&N ( Horizontal (8+12)

(i) Load Bank 4 way 250 Amp

Som Nath Contractor