REPAIRS TO CERTAIN WOODEN / STEEL FURNITURE AT NASIRABAD

Amount

Chair CB Steel with Arms :- Removing of old unserviceable following parts from chair CB steel and supply and fix new following parts (seat, back and hand rest of 2nd class hard wood (teak) reweaving duly caned with 2/2.5mm wide half round cream / white colour as per Godrej pattern E-in-C's Branch Drg No FD-204 sheet 1/1 holes shall be covered with 4mm thick half round plastic cane of same colour duly fixed with suitable size nut bolt with 2 washers of size 75 x 3mm or screw 04 Nos, complete all as shown on drg and as directed :-

Seat frame required as per drg Drg No :- FD-75 (M)

Back frame required as per drg Drg No :- FD-75 (M)

Hand rest required as per drg Drg No :- FD-75 (M)

M & L for preparation of wooden and steel surfaces and wooden surface to be black polished and steel surfaces to be painted with one coat of synthetic enamel paint of OG colour all as shown on drgs and as directed. Drg No :- FD-75 (M)

Chair CB Steel without Arms :- All as per item No 1.00 here-in-before but seat and back frame of chair CB steel without arms complete all as shown on drg and as directed :-

Seat frame required as per drg Drg No :- FD-75 (M)

Back frame required as per drg Drg No :- FD-75 (M)

M & L for preparation of steel surfaces and painted with one coat of synthetic enamel paint of OG colour all as shown on drgs and as directed. Drg No :- FD-75 (M)

Removing of old unserviceable blind broken mirror from table dressing gents S & F new mirror of size 760 x 390 x 5/5.50 mm thick of superior quality fixed in wooden frame duly polished as shown on drawing and complete all as specified and directed. Drg No :- FD-31 (M), FD-230, FD-379.

Removing of old unserviceable back ply from table dressing gents and S & F new back ply of 6 mm thick both side commercial ISI marked duly approved by GE including 02 Nos knob and polishing of wooden surfaces as shown on drawing and complete all as specified and directed. Drg No :- FD-31 (M), FD-230, FD-379.

Removing of old unserviceable blind broken mirror from table dressing ladies S & F new mirror copper electroplated 5/5.5 mm thick of size 1120 x 365mm as shown on drawing and complete all as specified and directed. Drg No :- FD-32, FD-251, FD-378.

Removing of old unserviceable back ply from table dressing ladies and S & F new back ply of 6 mm thick both side commercial ISI marked duly approved, as shown on drawing and complete all as specified and directed. Drg No :- FD-32, FD-251, FD-378.

Replacement of aluminium anodised knob for table dressing ladies as shown on drawing and complete all as specified and directed. Drg No :- FD-32, FD-251, FD-378.

Removing of broken glass shutter from table dressing ladies & S & F new glass shutter of 5/5.5mm thick of required size as shown on drawing and complete all as specified and directed. Drg No :- FD-32, FD-251, FD-378.

Replacement of aluminium channel for shutter of table dressing ladies as shown on drawing and complete all as specified and directed. Drg No :- FD-32, FD-251, FD-378.

Replacement of legs from table dressing ladies of Ist class hard wood (teak wood) leg to match with existing, made cut in shape as shown on drawing and complete all as specified and directed. Drg No :- FD-32, FD-251, FD-378.

M & L for preparation of wooden surfaces of table dressing ladies duly finished and polished complete all as specified and directed. Drg No :- FD-32, FD-251, FD-378.

Bed Ply Top :-

Removing of old unserviceable plywood from bed, tightening of bed of frame and S & F new ply of 12mm thick both side commercial BWR, ISI mark duly approved by GE of size as per drg and fixed with new screw of suitable size, as shown on drawing and complete all as specified and directed. Drg No :- FD-246, FD-247, FD-213.

Removing of unserviceable plywood from both side head rest of bed and S & F new ply one side teak face other side commercial BWR ISI mark duly approved by GE of size 780 x 340mm and fixed with suitable size nails/ screw including 4mm thick, 40mm wide beading around the top of head rest including 15mm wide half round beading fixed with nail in front of head rest as shown on drawing and complete all as specified and directed. Drg No :- FD-246, FD-247, FD-213.

All as per item No 12.02 here-in-before but of size 780 x 180mm foot rest of bed plywood for both side as shown on drawing and complete all as specified and directed. Drg No :- FD-246, FD-247, FD-213.

Removing of unserviceable long rail from bed ply top and S & F new long rail of 2nd class hard wood (sal wood) of size as shown on drawing and complete all as specified and directed. Drg No :- FD-246, FD-247, FD-213.

Removing of old unserviceable bottom support of ply and S & F new bottom support of 2nd class hard wood (teak) size as per drg and provide Hard PVC shoe bottom as shown on drawing and complete all as specified and directed. Drg No :- FD-246, FD-247, FD-213.

M & L for preparation of wooden surfaces duly finished and polished complete all as specified and directed. Drg No :- FD-246, FD-247, FD-213.

Chair Dining :- Removing of old unserviceable following parts from chair dining and supply and fix new following parts of first class hard wood (teak wood) duly finished with existing shape and fixed with bamboo pin and fevicol including tightening of other joints and provided PVC hard rubber shoes as shown on drawing and complete all as specified and directed :-

Front legs (L&R) as ordered of size as per drg Drg No :- FD-1105, FD-16(M), FD-203, FD-228

Rear legs (L&R) as ordered of size as per drg Drg No :- FD-1105, FD-16(M), FD-203, FD-228

Side rail with holes (L&R) side for canning of size as per drg Drg No :- FD-1105, FD-16(M), FD-203, FD-228

Front and back rails with holes for canning of size as per drg Drg No :- FD-1105, FD-16(M), FD-203, FD-228

Stiffener bottom of size as per drg Drg No :- FD-1105, FD-16(M), FD-203, FD-228

Back rest of size as per drg Drg No :- FD-1105, FD-16(M), FD-203, FD-228

M & L for preparation of wooden surfaces duly finished and polished complete all as specified and directed. Drg No :- FD-1105, FD-16(M), FD-203, FD-228

Chair Writing :- All as per item No 13.00 here-in-before but chair writing complete all as specified and directed :-

Front legs (L&R) of size as per drg Drg No :- FD-250, FD-280.

Rear legs (L&R) of size as per drg Drg No :- FD-250, FD-280.

Side rail with holes (L&R) side canning of size as per drg Drg No :- FD-250, FD-280.

Front and back side with holes for canning of size as per drg Drg No :- FD-250, FD-280.

Stiffener bottom of size as per drg Drg No :- FD-250, FD-280.

Back rest of size as per drg Drg No :- FD-250, FD-280.

Hand rest of size as per drg Drg No :- FD-250, FD-280.

M & L for preparation of wooden surfaces duly finished and polished complete all as specified and directed. Drg No :- FD-250, FD-280.

Chair Easy :- All as per item No 13.00 here-in-before but chair easy complete all as specified and directed :-

Front legs (L&R) required of size as per drg Drg No :- FD-17 (M), FD-201, FD-229.

Rear legs (L&R) required of size as per drg Drg No :- FD-17 (M), FD-201, FD-229.

Side rail with holes (L&R) side for canning of size as per drg Drg No :- FD-17 (M), FD-201, FD-229.

Front and back rails with holes for canning of size as per drg Drg No :- FD-17 (M), FD-201, FD-229.

Back rail top and bottom rail of back frame with holes for canning of size as per drg. Drg No :- FD-17 (M), FD-201, FD-229.

Back rail (L&R) back frame with holes for canning of size as per drg. Drg No :- FD-17 (M), FD-201, FD-229.

Stiffener botto of size as per drg Drg No :- FD-17 (M), FD-201, FD-229, .

Hand rest of size as per drg Drg No :- FD-17 (M), FD-201, FD-229.

M & L for preparation of wooden surfaces duly finished and polished complete all as specified and directed. Drg No :- FD-17 (M), FD-201, FD-229.

Table centre :- Removing of old unserviceable following parts from table centre and supply and fix new following parts of first class hard wood (teak wood) duly finished in shape and tightening of toher joints all as shown on drg and complete all as specified and directed :-

Long rails of table of size as per drg. Drg No :- FD-29 (M), FD-274, FD-235

Side rails (left / right) of size as per drg Drg No :- FD-29 (M), FD-274, FD-235

Legs for table centre of size as per drg. Drg No :- FD-29 (M), FD-274, FD-235

Stiffener bottom of size as per drg Drg No :- FD-29 (M), FD-274, FD-235

Removing of unserviceable/ broken top from table centre and supply and fix new top of table centre of prelaminated particle board of 18 / 19mm thick, exterior grade, ISI mark of size 900 x 45mm and providing 4mm thick first class hard wood teak wood beading around the top all as shown on drg and as directed. Drg No :- FD-29 (M), FD-274, FD-235

M & L for preparation of wooden surfaces duly finished and polished complete all as specified and directed. Drg No :- FD-29 (M), FD-274, FD-235

Teapoy :- Removing of old unserviceable following parts from teapoy supply and fix new following parts of first class hard wood (teak wood) duly finished in shape in existing position of size, all as shown on drg and complete all as specified and directed :-

Long rails of teapoy of size as per drg Drg No :- FD-278, FD-34 (M), FD-232, FD-382.

Short rails ( left / right) of size as per drg Drg No :- FD-278, FD-34 (M), FD-232, FD-382.

Legs of size as per drg Drg No :- FD-278, FD-34 (M), FD-232, FD-382.

Stiffener of size as per drg Drg No :- FD-278, FD-34 (M), FD-232, FD-382.

Removing of unserviceable/ broken top from teapoy fabrication and fixing top of prelaminated particle board of 18/19mm thick exterior grade ISI mark including supply and fixing of 4mm thick first class hard wood (teak wood) beading around the top all as shown on drg and complete all as specified and directed. Drg No :- FD-278, FD-34 (M), FD-232, FD-382.

M & L for preparation of wooden surfaces duly finished and polished complete all as specified and directed. Drg No :- FD-278, FD-34 (M), FD-232, FD-382.

Table Peg :- Removing of old unserviceable following parts from table peg and supply and fix new following parts of first class hard wood (teak wood) duly finished in shape and tightening of other joints all as shown on drg and complete all as specified and directed :-

Front and back rails of table of size as per drg Drg No :- FD-236, FD-25 (M), & FD-384.

Side rails (Left & Right) of size as per drg Drg No :- FD-236, FD-25 (M), & FD-384.

Legs of size as per drg Drg No :- FD-236, FD-25 (M), & FD-384.

Stiffener of size as per drg Drg No :- FD-236, FD-25 (M), & FD-384.

Removing of unserviceable/ broken top from table peg fabricating and supply and fixing of top of prelaminated particle board of 18/19mm thick exterior grade ISI mark including supply and fixing of 4mm thick first class hard wood (teak wood) beading around the top all as shown on drg and as directed. Drg No :- FD-236, FD-25 (M), & FD-384.

M & L for preparation of wooden surfaces duly finished and polished complete all as specified and directed. Drg No :- FD-236, FD-25 (M), & FD-384.

Table 3' x 2' with or without drawer :- Removing of old unserviceable following parts from table 3' x 2' with or without drawer and supply and fix new following parts of first class hard wood (teak wood) duly finished in shape and tightening of other joints all as shown on drg and complete all as specified and directed :-

Front and back rails of table of size as per drg Drg No :- FD-42 (M), 283.

Side rails (left and right) of size as per drg Drg No :- FD-42 (M), 283.

Legs of size as per drg Drg No :- FD-42 (M), 283.

Stiffener of size as per drg Drg No :- FD-42 (M), 283.

Repair of drawer as per drg including replacement of unserviceable parts. Drg No :- FD-42 (M), 283.

Removing of unserviceable/ broken top from table 3' x 2' with or without drawer and supply and fixing of top of prelaminated particle board of 18/19mm thick exterior grade ISI mark including supply and fixing of 4mm thick first class hard wood (teak wood) beading around the top all as shown on drg and as directed. Drg No :- FD-42 (M), 283.

M & L for preparation of wooden surfaces duly finished and polished complete all as specified and directed. Drg No :- FD-42 (M), 283.

Side board :-

Removing of old unserviceable broken shutter from side board and supply and fix new shutter of 18/19 mm thick prelaminated particle board of exterior grade, one side teak shade other side white in colour, including 4mm thick first class hard wood (teak wood) beading around the top and fixing in position with piano hinges all as shown on drg and complete all as specified and directed. Drg No :- FD-26 (M), 241, FD-371.

Removing of old unserviceable particle board from sides board and supply and fix new sides (L & R) prelaminated particle board 18/19 mm thick of approved shade and fixing in position all as shown on drg and complete all as specified and directed. Drg No :- FD-26 (M), 241, FD-371.

Removing old unserviceable back ply from side board and S & F back ply of 6mm thick both side commercial, ISI mark and fixing in position all as shown on drg and complete all as specified and directed. Drg No :- FD-26 (M), 241, FD-371.

Removing old unserviceable legs from side board and S & F new legs of 1st class Hardwood (teak wood) and fixing in position with screw / nails all as shown on drg and complete all as specified and directed. Drg No :- FD-26 (M), 241, FD-371.

Removing old unserviceable / broken knob from side board and S & F new knob of 38 to 40mm dia plastic coated and fixed with mechanical screw all as shown on drg and complete all as specified and directed. Drg No :- FD-26 (M), 241, FD-371.

Removing old unserviceable front plank of drawer from side board and S & F new front plank of 18/19mm thick prelaminated particle board with side one teak shad and other side white in colour and fixing in position all as shown on drg and complete all as specified and directed. Drg No :- FD-26 (M), 241, FD-371.

Replacement of side plank (L & R) side old drawer and S & F new plank of 12mm thick both side commercial ISI mark and fixing in position with suitable nails all as shown on drg and complete all as specified and directed. Drg No :- FD-26 (M), 241, FD-371.

Replacement of bottom of drawer plank and S & F new plank of 6mm thick both side commercial ply wood ISI mark and fixing in position all as shown on drg and complete all as specified and directed. Drg No :- FD-26 (M), 241, FD-371.

Removing old unserviceable / broken top from side board and S & F new top of 18/19mm thick prelaminated particle board of exterior grade of approved shade, ISI mark and fixing in position including 4mm thick 1st class H.W (teak wood) beading around the top all as shown on drg and complete all as specified and directed. Drg No :- FD-26 (M), 241, FD-371.

M & L for preparation of wooden surfaces duly finished and polished complete all as specified and directed. Drg No :- FD-26 (M), 241, FD-371.

Book Case :-

Removing old unserviceable / broken back ply from book case and S & F new back ply of 6mm thick both side commercial ISI mark, duly approved and fixing in position all as shown on drg and complete all as specified and directed. Drg No :- FD-237.

Removing old unserviceable shutter from book case and S & F new shutter of 18/19mm thick prelaminated particle board, one side teak shade other side white in colour, including 4mm thick 1st class HW (teak wood) beading around the shutter and fixing in position with piano type hinges, all as shown on drg and complete all as specified and directed. Drg No :- FD-237.

Removing old unserviceable legs from book case and S & F new legs of 1st class HW (teak wood) duly finished and fixing in position all as shown on drg and complete all as specified and directed. Drg No :- FD-237.

Removing old unserviceable top from book case and S & F new top of 18/19mm thick prelaminated particle board, one side teak shade other side white in colour, exterior grade duly approved, all as shown on drg and complete all as specified and directed. Drg No :- FD-237.

Removing old unserviceable and broken knob from book case and S & F new plastic coated aluminium anodized 38 to 40mm of best quality knob and fixed with machine screw with washer on shutter, all as shown on drg and complete all as specified and directed. Drg No :- FD-237.

M & L for preparation of wooden surfaces duly finished and polished complete all as specified and directed. Drg No :- FD-237.

Table writing :- Removing of old unserviceable the following parts from table writing and supply and fix new following parts and fixing in position all as shown on drg and complete all as specified and directed :-

Legs (left side) of size as per drg Drg No :- FD-33 (M), FD-249 & FD-275.

Legs (right side) of size as per drg Drg No :- FD-33 (M), FD-249 & FD-275.

Right side ply 6mm thick commercial for box of the table writing of size as per drg Drg No :- FD-33 (M), FD-249 & FD-275.

Light side ply 6mm thick commercial for box of the table writing of size as per drg Drg No :- FD-33 (M), FD-249 & FD-275.

6mm thick commercial for box of the table writing of front side of size as per drg Drg No :- FD-33 (M), FD-249 & FD-275.

Stiffener bottom of size as per drg. Drg No :- FD-33 (M), FD-249 & FD-275.

Drawer of table writing of size as per drg Drg No :- FD-33 (M), FD-249 & FD-275.

Shutter of 18/19mm thick prelaminated particle board, exterior grade with knob of 38 to 40mm dia of size as per drg Drg No :- FD-33 (M), FD-249 & FD-275.

Removing of unserviceable top from table writing and supply and fix new top of 18/19mm thick prelaminated particle board exterior grade, one side teak shade other side white in colour, including 4mm thick of first class hard wood (teak wood) beading around the top duly fixing in position all as shown on drg and complete all as specified and directed. Drg No :- FD-33 (M), FD-249 & FD-275.

M & L for preparation of wooden surfaces duly finished and polished complete all as specified and directed. Drg No :- FD-33 (M), FD-249 & FD-275.

Table office clerk (Wooden) :- Removing of old unserviceable following parts from table office clerk (wooden) and supply and fix new following parts of first class hard wood (teak wood) duly finished in shape and fixing in position with bamboo pins and fevicol all as shown on drg and complete all as specified and directed :-

Front and back rails of table of size as per drg Drg No :- DB-4122

Side rails (Left and Right) of size as per drg Drg No :- DB-4122

Legs for table office clerk (wooden) of size as per drg Drg No :- DB-4122

Stiffener bottom of size as per drg Drg No :- DB-4122

Drawer for table of size as per drg (complete drawer). Drg No :- DB-4122

Removing of unserviceable top from table office clerk (wooden) and supply and fix new top of 18/19mm thick prelaminated particle board exterior grade, one side teak shade other side white in colour, including 4mm thick of first class hard wood (teak wood) beading around the top duly fixing in position including polishing after repair work all as shown on drg and complete all as specified and directed. Drg No :- DB-4122.

Table office Officers (Wooden) :- Removing of old unserviceable following parts from table office officer (wooden) and supply and fix new following parts of first class hard wood (teak wood) and fixing in position with bamboo pins and fevicol all as shown on drg and complete all as specified and directed :-

Front and back rails of table of size as per drg Drg No :- DB-4110, 4119 & 4122.

Side rails (left and right) of size as per drg Drg No :- DB-4110, 4119 & 4122.

Legs for table office officer (wooden) of size as per drg Drg No :- DB-4110, 4119 & 4122.

Stiffener bottom of size as per drg Drg No :- DB-4110, 4119 & 4122.

Drawer for table of size as per drg (complete drawer). Drg No :- DB-4110, 4119 & 4122.

Removing of unserviceable top from table office officer (wooden) and supply and fix new top of 18/19 mm thick prelaminated particle board exterior grade, one side teak shade other side white in colour, including 4mm thick first class hard wood (teak wood) beading around the top duly fixing in position including polishing after repair wok all as shown on drg and as directed. Drg No :- DB-4110, 4119 & 4122.

Table dining 4 persons :- Removing of old unserviceable following parts from table dining 04 pers and supply and fix new following parts of first class hard wood (teak wood) duly finished in shape and fixing in position with new bamboo pins and fevicol all as shown on drg and complete all as specified and directed :-

Front and back rails of size as per drg Drg No :- FD/MAP-II/03.

Side rails (Left and Right) of size as per drg Drg No :- FD/MAP-II/03.

Legs for table dining 06 pers of size as per drg Drg No :- FD/MAP-II/03.

Stiffener bottom of size as per drg Drg No :- FD/MAP-II/03.

Bottom support of top of table of size as per drg Drg No :- FD/MAP-II/03.

Removing of unserviceable top from table dining 04 persons and supply and fix new top of 18/19 mm thick prelaminated particle board exterior grade, one side teak shade other side white in colour, including 4mm thick first class hard wood (teak wood) beading around the top including polishing after repair work all as shown on drg and complete all as specified and directed. Drg No :- FD/MAP-II/03.

Table dining 6 persons :- Removing of old unserviceable following parts from table dining 06 pers and supply and fix new following parts of first class hard wood (teak wood) duly finished in shape and fixing in position with new bamboo pins and fevicol all as shown on drg and complete all as specified and directed :-

Front and back rails of size as per drg Drg No :- FD-273 & 30 (M).

Side rails (Left and Right) of size as per drg Drg No :- FD-273 & 30 (M).

Legs for table dining 06 pers of size as per drg Drg No :- FD-273 & 30 (M).

Stiffener bottom of size as per drg Drg No :- FD-273 & 30 (M).

Bottom support of top of table of size as per drg Drg No :- FD-273 & 30 (M).

Removing of unserviceable top from table dining 06 persons and supply and fix new top of 18/19 mm thick prelaminated particle board exterior grade, one side teak shade other side white in colour, including 4mm thick first class hard wood (teak wood) beading around the top including polishing after repair work all as shown on drg and complete all as specified and directed. Drg No :- FD-273 & 30 (M).

Table dining 8 persons :- Removing of old unserviceable following parts from table dining 08 pers and supply and fix new following parts of first class hard wood (teak wood) duly finished in shape and fixing in position with new bamboo pins and fevicol all as shown on drg and complete all as specified and directed :-

Front and back rails of size as per drg Drg No :- FD-30 (M).

Side rails (left and right) of size as per drg Drg No :- FD-30 (M).

Legs for table dining 08 pers of size as per drg Drg No :- FD-30 (M).

Stiffener bottom of size as per drg Drg No :- FD-30 (M).

Support for table bottom of the top of size as per drg Drg No :- FD-30 (M).

Removing of unserviceable top from table dining 08 persons and supply and fix new top of 18/19mm thick prelaminated particle board exterior grade, one side teak shade other side white in colour, including first class hard wood (teak wood) beading around the top duly polished after complete of repair work, all as shown on drg and complete all as specified and directed. Drg No :- FD-30 (M).

Almirah large / med steel and Locker Bed Side steel with shelves :-

Removing of unserviceable lock from almirah large/ medium steel with shelves and supply and fix new lock of metallic 06 liver brass, vertical type 65mm with duplicate key and fix with machine screw all as shown on drg and complete all as specified and directed. Make :- Godrej or equivalent in approved make. Drg No :- FD-1031 & 1032.

Removing of unserviceable handle from almirah steel large / med and supply and fix new handle chromium plated 150mm long flat with nut and provide brass bush for handle as required, all as shown on drg and complete all as specified and directed. Drg No :- FD-1031 & 1032.

Removing of old locking devices from almirah steel large / medium and supply and fix new locking device including 10mm dia MS round bars duly painted with two coats of synthetic enamel paint olive green over a coat of primer all as shown on drg and complete all as specified and directed. Drg No :- FD-1031 & 1032.

Removing of unserviceable door from almirah large with shelves and supply and fix new door, fix with machine screw duly painted with two coats of synthetic enamel paint olive green over a coat of primer all as shown on drg and complete all as specified and directed. Drg No :- FD-1031 & 1032.

Removing of unserviceable leg from almirah large / medium steel with shelves and supply and fix new leg with welding all as shown on drg and complete all as specified and directed. Drg No :- FD-1031 & 1032.

Removing of unserviceable haps and staple 1.5" x 8" long from locker bed steel and supply and fix haps and staple 1.5" x 8" long with welding and machine screw, duly painted with two coats of synthetic enamel paint olive green over a coat of primer all as shown on drg and complete all as specified and directed. Drg No :- FD-275.

Removing of unserviceable door from locker bed side steel / almirah medium steel with shelves and supply and fix new door fixed with hinges all as shown on drg and complete all as specified and directed. Drg No :- FD-275.

Removing of unserviceable leg from locker bed side steel / almirah medium steel with shelves and supply and fix new leg fixed with welding, duly painted with two coats of synthetic enamel paint olive green over a coat of primer all as shown on drg and complete all as specified and directed. Drg No :- FD-275.

Table Bed Side :-

Removing of unserviceable/ broken top from table bed side and supply and fixing in top prelaminated particle board of 18/19mm thick, exterior grade, ISI mark, all as shown on drg and complete all as specified and directed. Drg No :- FD-236, 25(M) & 384.

Removing of unserviceable/ broken left & right side part from table bed side and supply and fixing in side of table bed side prelaminated particle board of 18/19mm thick, exterior grade, ISI mark all as shown on drg and complete all as specified and directed. Drg No :- FD-236, 25(M) & 384.

Removing of unserviceable/ broken inner partition from table bed side and supply and fixing inner partition of prelaminated particle board of 18 / 19mm thick exterior grade ISI mark complete with battening and polishing all as shown on drg and complete all as specified and directed. Drg No :- FD-236, 25(M) & 384.

TV Trolley :-

Removing of old unserviceable/broken glass from TV trolley and supply and fixing new glass 5/5.5mm thick of suitable size as directed by Engg-in-Charge complete all as specified and directed. Drg No :- TP.

Removing of old unserviceable/broken castoer from TV trolley and supply and fixing new castoer of suitable size as directed by Engg-in-Charge complete all as specified and directed. Drg No :- TP.

Chair Executive Revolving :-

Removing of old unserviceable/broken base from chair executive revolving / chair computer and supply and fixing new base of suitable size as directed by Engg-in-Charge complete all as specified and directed. Drg No :- TP.

Removing of old unserviceable/broken Hydraulic from Chair executive revolving/Chair computer supply and fixing new Hydraulic of suitable size as directed by Engg-in-Charge complete all as specified and directed. Drg No :- TP.

Removing of old unserviceable/broken tapestry cloth from chair executive and finishing of new Tapestry cloth of superior quality as per size directed by Engr-in-Charge and shown on drg Drg No :- TP.

Charpoy GI pipe with MDF board :-

Removing old broken GI long rail 32mm bore from charpoy and S & F new long rail in position made out of GI pipe 32mm bore medium grade with BSP screw thread of size as per drg complete all as specified and as directed. Note :- (a) Above quoted rate shell be inclusive of tightening of loose GI elbow, if required at site. No extra shall be admissible on this account. (b) Make of GI Pipe shall be Tata, Jindal ,Swastik, Prakash, Zenith, BST and Surya. Drg No :- FD-220

Removing old broken GI Pipe short rail and fixing short rail of old GI pipe 32 mm bore medium grade made from the broken long rail as retrieved from Srl item No 26.00 here in before including BSP screw thread of size as per drawing complete all as specified and directed. Drg No :- FD-220

Removing old broken GI Pipe legs & fixing leg of old GI Pipe 32 mm bore medium grade made from the broken short rail retrieved vide Srl item No 9.00 here in before by cutting and threading required including clamp made from 25 X 3 mm thick flat iron for MNF set and 2mm thick MS plate of 40 mm dia welded to the bottom of legs complete all as specified and directed. Drg No :- FD-220

Removing broken / unserviceable GI check nut from charpoy GI Pipe and providing new GI check nut of 32mm dia for charpoy GI pipe complete all as specified and as directed. Drg No :- FD-220

Taking out old unserviceable GI elbow from GI pipe charpoys and supply and fixing new GI elbow 32mm bore 3 ways complete ISI marked complete all as specified and as directed. Drg No :- FD-220

Removing old unserviceable MDF board from charpoy GI pipe and supply and fix of 12mm thick ply wood BWR on charpoy GI pipe as per size of charpoy as specified and as directed by Engr-in-Charge Make :- Green ply / Kit ply / Century /National Drg No :- FD-220

HINDUSTAN ENGINEERING WORKS

ANAM BUILDCON

L.BHIMSEN

AJAY TRADERS

SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD