Estimate for 05 no. 100 KVA additional dtr at various location under Sheopur U d/c of South dn Sheopur.

Laying and Jointing PVC Pipe. Heading

Additional Erection Charge

11 KV Top clamp 65X65X6 mm. angle type

11 KV Composite Polymer AB Switch Horizontal Movement type

Three phase Electronic meter 10-40 Amps. with data downloading facility & box

WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long

Transformer mounting Channel (100X50x6 mm.)

11 KV Strain hardware (T&C type) fittings

D.C. Cross-arms 8 ft centre to center (100x50x6mm) Channel

11 KV D.O. Fuse Unit Polymer type

9 KV Gapless type(5 KA) polymer lightening arrestor

140 Kg.,8.0 Mtrs. long PCC pole

11 KV(45KN) Composite Polymer Disc Insulators

D.O.Mounting Channel 75x40x6mm

AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.)

BIS certified Energy Efficiency Level-III (Old)/Level-II (New) Convential 11/0.433KV, 100 KVA Distribution Transformer

11 KV Pin Insulator Polymer Composit (5 KN)

11 KV Single pole cut point fitting 100x50x6 mm channel

11 KV V cross arm 65X65X6 mm. angle type

1100 Volts Grade Arial Bunch XLPE Cable 3X120 + 1X16 + 1X95 Sq mm. Bare Masanger

LT A B cable Suspension clamps (Galvanized)

Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay

M.S.Nuts with Bolts

Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels

STAY WIRE 7/3.15 MM.(7/10 SWG)

Aluminium paint

Danger Boards Enamelled 11 KV

STAY GI WIRE 7/4.00 MM.(7/8 SWG)

Concreting of structures & foundation (1:3:6)

Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg)

Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG)

Red oxide paint

Stay set complete without Stay wire 16 mm. (Painted)

Bi-metallic clamps Distribution Transformers Bushing

G.I. STRIP 25X3 MM1

Galvanized nut & bolt with washer

Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC

Bentonite compound powder

Stone Block/Pre cast block for base pedding(450X450X75MM)

Complete jumpering of DTR

LT distribution box with 1.2 mm thick MS powder coated sheet, 200 A MCB on incoming & 6 no. 125 A HRC fuse base including 100 A HRC fuse , For 100 KVA Transformer

Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg)

G.I.Pipe 40 mm Dia C grade type

Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire

Jointing Sleeves suitable for Raccoon (80Sq.mm.Al. Eq.) AAAC conductor

Aluminium Binding wire and tape

Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay

Stay set 20 mm. complete without Stay wire (Painted)

Three Phase Service connection box(Deep Drwan Metal Service Connection Boxes ) with one incoming up to 35 mm2 and 4 no outgoing up to 16 mm2 with insulated multiple outgoing connector-

Single Phase Service connection box (Deep Drwan Metal Service Connection Boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector-

Clamps for neutral for AB Cable

LT A.B Cable tension clamps (Galvanized)

Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm)

Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm)

Stay Insulators 90X65mm

Lumpsum Value

Total value all section

Bifurcation of Erection Value

The Total value of Schedule2

Contractor %

Labour & Transport Amount Shifted Form Company side to Contractor Side

Final amount of Labour & Transport charges (Company side and Contractor Side)

Total Amount Without GST

GST on Transportation@5%

GST on (Material + Labour) @18%

Total Amount With GST

Total Amount For NIT

Please Enable Macros to View BoQ information