PAINTING TO RUNWAY/DISPERSAL/TERMAC PTT AND ALLIED WORKS AND REPAIR/REPLACEMENT OF UNSERVICEABLE ELECTRICAL LIGHTS AND WIRING,DBS INCL SUB MAIN WIRING, LED FLOOD LIGHT AND OTHER CONNECTED WORK (DISPERSAL, HANGARS AND BLAST PEN) IN TECHNICAL AREA

Amount

Material and labour for preparation of old painted surface of concrete/flexible pavement like Runway, taxi track, link etc, by removing the greasy materials, dirt, dust etc and applying one coat of water based road marking paint grade-2 conforming to IS 164-1981, of tint white/yellow/golden yellow as approved, as in lines, dashes, arrows, letters etc over 10cm in width or girth complete all as specified and as directed by the Engineer-in-Charge. (Note :- Paint shall be applied on prepared surfaces of concrete in a manner, so that thick paint shall stand boldly and solidly on the surfaces without showing brush mark on surfaces applied for. Surfaces shall be finished by application of paint till desired result obtained.)

Material and labour for painting lines, dashes, arrows, letters etc on roads, pavements and the like not exceeding 10cm width or girth with one coat of water based road marking paint Grade-2, conforming to IS-164-1981 (tint white/yellow/golden yellow as approved), complete all as specified and as directed.

Material and labour for preparation of old painted concrete, asbestos cement or plastered surfaces and applying one coat of synthetic enamel paint (of approved tint) on surfaces of any description over 10cm width or girth, complete all as specified and as directed.

M & L for preparation of old painted Steel / Iron surfaces of any description, not other wise described, over 10 cm width or grith and applying one coat of synthetic enamel paint, complete all as specified and directed.

Material and labour for preparation of old treated bituminous /asphaltic surfaces (over-run both ends of Runway) by removing all vegetation, sweeping with brooms and finally clean by fanning with gunny bags to remove all loose dust, dirt and applying one thick coat of white wash by spreading on prepared surfaces thoroughly to stand out boldly, solidly without showing signs of bruss mark on painted surfaces, complete all as specified and as directed.

Material and labour for applying one coat of acrylic emulsion distemper to old decorated plastered surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots), complete all as specified and directed.

Taking down carefully point wiring of any type, size and description from hard/ teak wood batten/through pipes/casing capping (light, fan, sockets and socket outlets etc) including removal of battens, pipes, plug sockets, socket outlets, switches, shades, ceiling roses, light fittings etc. complete and making good the disturbed surface to match with existing, complete all as specified and directed.

Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls, complete all as specified and directed.

Taking down carefully sub main wiring of any nos of wire and size with earth wire from wooden batten/surface conduit/casing caping complete with its all accessories, complete all as specified and directed.

M & L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade (ISI marked) including all conduit accessories on surface wiring including concealed pressed steel terminal box of required size factory made with top cover of ISI Marked plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FR type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface etc. for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.

All as per item No 10 here-in-above but One 3 pin 5 Amps socket point on the same board, complete all as specified and directed.

All as per item No 10 here-in-above but One 3 pin 5 Amps socket point on independent board, complete all as specified and directed.

All as per item No 10 here-in-above but point wiring with 4.0 sqmm cable and 4.0 sqmm earth continuity conductor for 3 pin / 5 pin 15 Amps socket and all as specified and directed.

M&L for point wiring with multistranded copper conductor cable, PVC insulated and unsheathed (FRLS) size 1.5 sqmm drawn in and incl PVC casing and caping with fixing accessories, to be fixed on wooden gutties or plastic rawal plug, for one light /fan point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet / modular plate incl continous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.

All as per item No 14 here-in-above but One 3 pin 5 Amps socket point on the same board, complete all as specified and directed.

All as per item No 14 here-in-above but One 3 pin 5 Amps socket point on independent board, complete all as specified and directed.

All as per item No 14 here-in-above but One 3 pin 5 Amps socket outlet independent but below the switch board of light points in the same vertical plate with cables 1.5 sqmm size, complete all as specified and directed.

All as per item No 14 here-in-above but point wiring with 4.0 sqmm cable and 4.0 sqmm earth continuity conductor for 3 pin / 5 pin 15 Amps socke, complete all as specified and directed.

M & L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in existing PVC conduit / casing/caping with all accessories on surface/concealed wiring including concealed pressed steel terminal box of required size factory made duly painted inside & outside with two coats with top cover of ISI Marked plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FR type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.

All as per item No 19 here-in-above but One 3 pin 5 Amps socket point on the same board, complete all as specified and directed.

All as per item No 19 here-in-above but One 3 pin 5 Amps socket point on independent board, complete all as specified and directed.

S&F corrugated flexible conduit pipe of size 25 mm outer dia with connector, saddle etc including taking out of existing open cable from wall and insert into flexible conduit, complete all as specified and directed.

M&L for switch piano flush button single pole one way 6 amps 240 volts, complete all as specified and directed

M & L ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, complete all as specified and directed

M & L for socket outlet 2 in 1, 3 pin 6 Amp flush type, complete all as specified and directed

M & L for switch and socket combination 5 in 1, 6A/16A flush type, complete all as specified and directed

S&F stepped type electronic fan regulator flush type AC, 230 volt suitable for any type of ceiling fan, complete all as specified and directed

M & L for Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Supply and draw sub main wiring in repairs of two run 4.0 sqmm single core PVC insulated, unsheathed multistranded FRLS copper conductor cable 1100 Volt grade, drawn through and including PVC conduit medium duty and accessories of not less than 25 mm size (ISI marked) including all conduit accessories for concealed to the surfaces of the wall/ceiling including one run of 4.0 sqmm single core PVC insulated unsheathed FRLS copper earth continuity conductor all as specified and as directed. (Note : Two runs of single core cable with one run of earth continuity conductor including PVC conduit accessories shall be measured and paid as one length.) including making good disturbed surface, complete all as specified and directed

All as per item No 29 here-in-above but in PVC Casing&Caping, complete all as specified and directed.

All as per item No 29 here-in-above but in existing surface / recessed steel conduit/ PVC Conduit / PVC Casing&Caping, complete all as specified and directed.

Supply and draw sub main wiring in repairs of two run 6.0 sqmm single core PVC insulated, unsheathed multistranded FRLS copper conductor cable 1100 Volt grade, drawn through and including PVC conduit medium duty and accessories of not less than 25 mm size (ISI marked) including all conduit accessories for concealed to the surfaces of the wall/ceiling including one run of 6.0sqmm single core PVC insulated unsheathed FRLS copper earth continuity conductor all as specified and as directed. (Note : Two runs of single core cable with one run of earth continuity conductor including PVC conduit accessories shall be measured and paid as one length.) including making good disturbed surface, complete all as specified and directed.

All as per item No 32 here-in-above but in PVC Casing / Caping, complete all as specified and directed.

All as per item No 32 here-in-above but in existing surface / recessed steel conduit/ PVC Conduit / PVC Casing &Caping , complete all as specified and directed.

Supply and fixing sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 4 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

Supply and fixing sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 8 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

Supply and fixing sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 12 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

Supply and fixing sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Triple Pole & Neutral (TPN), suitable for 4way, 415 volts, IP 43 & IK 09 with metal door fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

Supply & fixing MCB Triple Pole and Neutral (TPN) of capacity 65 to 70 Amps, 415 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

Supply & fixing MCB Single Pole and Neutral (SPN) of capacity 40 to 63 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

Supply & fixing MCB Single Pole SP of capacity 6 to 32 Amps, 240 Volts, breaking capacity 1 0 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

Cutting chases, pinning in, making good to facings in stone concrete wall / blocks / slab where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting exc 10 cm but n.exc 20 cm girth, complete all as specified and directed.

M&L for earthing & testing complete with GI earth plate electrode 60cmX60cmX6mm thick buried directly in ground vertically to a depth not less than 2.25mtr below normal ground level with top edge of earth plate at a depth not less than 1.5 mtr below normal ground level connected to and including earth lead wire 4 mm dia by means of bolts, nuts and check nuts and washers etc. made of GI & connected to earthing test point and earth dolly all as shown in elect plate No 3 of SSR Pt I including all necessary earth work, excavation, PCC chamber, (1:2:4) B1 & RCC (1:2:4) B1 chamber cover with suitable reinforcement with handle including 15mm bore GI light grade protection pipe upto 7.5m length & 20mm bore GI medium grade watering pipe and wire mesh, funnel, char coal dust, common salt, wire mesh etc., complete all as specified and directed.

S & F wall mounted LED light fitting 1 x 20 Watt, 4 feet long, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. Make : Havells Cat Part No. LHEXACP7UN1W020 or equivelant make of Crompton/Havells/Surya/Philips.

S & F LED luminaire 600 mm x 600 mm 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling icnluding connecting upt with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed. Make : Havells Cat Part No. STA ATO 2x2 PLR 36W LED 840 MOD or equivelant make of CG/UIPRO/Surya/Philips.

S & F energy efficient 'LED' Flood light 120W luminaries with aluminum die cast housing, toughened glass cover with IP 66 protection, CCT 5700 K including fixing arrangement on wall/ Pole/ surface and connecting cable up to nearest ceiling rose into flexible PVC conduit, complete all as specified and directed. Make : Cromton Cat Part No. LFLN-120-CDL/60-M or equivelant make of Crompton/Havells/Surya/Philips. Note: An amount of Rs.19795.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S I P GROUP

M/S. VINITA CONSTRUCTION

M/S MANODEEP CONSTRUCTION

M/S. JOGINDER KUMAR GOYAL

M/S. NARENDRA KUMAR GARG

M/S SARKAR ELECTRIC

M/S SANMILAN NANDI