Interior and Fit-out works of GS1 India office, BG 01 and BG-02, Ground Floor at World Trade Centre, Tower-B, Nauroji Nagar, New Delhi-110029

ABSTRACT OF COST

S No DESCRIPTION Amount DSR Amount Non DSR

A CIVIL/ INTERIOR WORKS 2,436,417.81 33,698,652.12

C LIGHTING 6,223,861.07

E FIRE ALARM & PA SYSTEM 2,389,237.07

F FIREFIGHTING 810,244.00 192,190.00

H FURNITURE 25,276,455.00

I ACCESSORIES 4,610,693.80

J LANDSCAPE 2,326,290.00

K LOGO & SIGNAGE 429,525.00

L AV SYSTEM 17,379,239.00

M STUDIO WORKS 5,813,607.00

N ACCESS CONTROL 1,742,258.00

O IT WORKS 9,926,415.00

R WHITE GOODS 1,106,010.52

S BUILDING MANAGEMENT SYSTEM 3,990,099.97

T LIGHTING CONTROL AUTOMATION 6,748,798.83

U RODENT REPELLENT SYSTEM 208,711.31

V WATER LEAK DETECTION SYSTEM 61,990.00

W CENTRAL VACUUM SYSTEM 3,314,570.00

TOTAL (DSR+NON DSR) 150,974,506.38

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

1 DEMOLITION & DISMANTLING WORKS

Demolition of brickwork manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material

within 50 metres lead as per the direction of the engineer in charge

Dismantling door, windows and clerestory widows (steel or wood) shutter including chowkats, architrave, holdfasts etc complete and

stacking within 50 metres lead

TOTAL DEMOLITION WORKS 48357.74 0.00

2 CONCRETE WORKS

Providing and laying of autoclaved aerated concrete (AAC) blocks masonry 200mm thick with grade-1 AAC blocks of density 551 to 650

kg/cum conforming to IS:2185 (part3) in super structure above plinth upto level floor V level in cement mortar 1: 4 (1 cement: 4 coarse

sand). The rate includes providign and placing in position 2 nos 6 mm dia MS bars at every third course of masonary work.

Providing and fixing of continous concrete lintel of 200mmx100mm at 8' level wherever necessary. Rate to include shifting of material and all

lead, lift and scaffolding.

2.03 13.4 12 mm cement plaster of mix : 191.786 sq m 307.25 58926.25

13.4.1 1:4 (1 cement: 4 coarse sand)

TOTAL CONCRETE WORKS 269462.29 25343.60

3 WATERPROOFING WORKS

Providing and laying of water proofing treatment in sunken portion of WC's bathrooms, etc by applying cement slurry mixed with water

proofing cement compound consisting of applying:

(a) First layer of surry of cement @ 0.488kg/ sq m mixed with water proofing cement compound @ 0.253 kg/ sq m. This layer will be allowed

to air cure for 4 hours.

3.01 22.5 (b) Second layer of slurry of cement@ 0.242 kg/ sq m mixed with water proofing cement compound @ 0.126kg/ sq m. This layer will be 135.78 sq m 617.05 83783.05

allowed to aircure for 4 hours followed by water curing for 48 hours.

The rate includes preparation of surface treatment and sealing of all joints, corners, junctions of pipes and masonary with polymer mixed

TOTAL WATERPROOFING WORKS 83783.05 0.00

4 FLOORING WORKS

ALUMINIUM SKIRTING: Supply & fixing of 75mm Aluminium Skirting with 15 micron anodising In Natural Finish. Thickness 1.30 to

1.50mm. Designed to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

ENGINEERED WOODEN FLOORING: Supplying and Installation of engineered wooden flooring of total thickness 13mm -16mm, Top layer

4.02 MR PEFC controlled Core board PEFC controlled backing layer PEFC controlled sources Wood Veneer 2mm Tongue and groove Length Uniclic 45.25 sq m 7500.00 339375.00

Width Uniclic Multifit Domestic use Conditions as per direction of engineer in charge.

VITRIFIED TILES: Providing and laying vitrified floor tiles, 600x600mm size, with water absorption less than 0.08% and conforming to IS:

15622, of approved brand & manufacturer, in all colours and shades, in skirting, laid with cement based high polymer modified quick set tile

adhesive (water based) conforming IS: 15477 in average 6mm thickness, including grouting the joints. (Payment for grouting of joints to be

made separately)

VITRIFIED TILES: Providing and laying vitrified floor tiles, compact surface 600x600mm size, with water absorption less than 0.08% and

conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),

jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments, colour body product

etc., complete.

VITRIFIED TILES: Providing and laying vitrified floor tiles, 1200x1200mm size, 9mm thick suitable for floor and wall application) with water

absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar

1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching

pigments, colour body product etc., complete.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

VITRIFIED TILES: Providing and laying vitrified floor tiles, 1800x1200mm size, 9mm thick with water absorption less than 0.08% and

conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),

jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments, colour body product

etc., complete.

VITRIFIED TILES: Providing and laying vitrified floor and wall tiles, compact surface 2400x1200mm size, 9mm thick suitable for floor and

wall application) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on

20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with

white cement and matching pigments, colour body product etc., complete.

Providing of laticrete or weber epoxy grouting of approved color in tile joints wherever necessary. Epoxy grouting to be filled to entire

thickness of tile but 1mm less than the finished tile surface.

Supply and fixing of subway tiles as per selection on the serving counter wall. Tiles shall be set with adhesive of thickness required to

achieve plumb and 90 degrees on all surfaces.

Supply and fixing of subway tiles as per selection on the breakout space counter wall. Tiles shall be set with adhesive of thickness

required to achieve plumb and 90 degrees on all surfaces.

CARPET TILES: Providing and laying carpet tile flooring. Carpets shall be of Type 6 nylon loop pile carpet tiles/Plank. The carpet shall have

sufficient gauge (1/10 ~ 1/12) with sufficient stitches (10~13) per inch. The carpet shall be solution dyed fibre content or with injection

4.11 MR printing technology. The carpet shall have the pile height ranging from (2.0 ~ 3.0) mm with average density higher than 4500 Oz/ cubic yard. 230.37 sq m 4435.55 1021816.78

The total thickness of the carpet tile shall also range from (5.5 ~ 6.0) mm.

TOTAL FLOORING WORKS 938929.86 3179813.77

5 FALSE CEILING WORKS

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter

channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of

rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and

perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of

tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers

covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also

including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all

complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with

. 12.45.1 12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 436.96 sq m 1355.80 592430.37

STRETCHED FABRIC CEILING: Supply & installation of fabric false ceiling/ wall formed out with TRANSLUCENT Printed fabric coverings

made out of polyester knitted fabric coated with Polyurethane (PU). The TRANSLUCENT Printed fabric width of 2m, 3m, 4.1m &5.1m with

weight of 200gm/m2, thickness of 0, 3 mm. The appearance of fabric is matt, smooth and uniform with blanq color and light transmission of

50%. The tear strength of fabric should be accordance to CH: 4,5daN; TR: 6,5 daN. The fire rating should be accordance to B-S1, d0. The

fabric should be humidity resistant and free of carcinogenic substances(CMR) or volatile organic Compounds (VOC’s). At labeling in

accordance with the French decree no. 2011- 321, Oeko-Tex standard100 certified. Fabric should be installed with approved manufacturer

5.02 MR guidelines. It comes with 10- year manufacturer guarantee. The installation of TRANSLUCENT Printed fabric should be dry installation & 60.92 sq m 6500.00 395980.00

done at room temperature using CLIPSO PVC, ABS Grippers. Clipso ceiling base to be made of MS or Wooden frame finishing to a flush

finish of tapered and square edges in desired design as per architect specification.Supply of LED Lights behind the Fabric Wall/ False ceiling

in modules/ PCB with recommended wattage as per manufacturer's standards to give an effect of ambient lighting. LED make MLS/

Bridgelux / Osram- SMD 2835, LED spacing / Pitch should be atleast 73 -80mm with beam angle of 170 degree, Colour temperature shoud

be as per design intent 3000K/4000K/6000K. Wattage of 8-10W/mtr. LED modules/ PCB should be positioned properly to provide an even

light flow, casting noshadows or dark spots. LED Driver Cost included.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

GYPSUM TILE FOR WET AREAS (TOILETS & PANTRY): Providing & fixing of DANOTILE, high humidity resistant, made of special high

grade, glass fibre reinforced gypsum, 600x600x9.5mm thick, 30 min fire rated* (third party certificate ), A2,s1-d0, mounted on T-24 exposed

Grid suspended ceiling system which includes Main Tee at every 600mm c/c and Cross Tee, 600mm. Wall angle is then fixed along the

perimeter of wall with screws (as per manufacturers specification). The suspension is done with all accessories like Soffit cleat, leveling

clips & wire rods as per design, drawings and architects instruction.The tiles are machine laminated with non-toxic PVC free foil on the face

side & red poleyethelene foil backing on the reverse side. Charachteristics : The Tiles shall be:

5.03 MR • Manufactured from high grade non-combustible glass fibre reinforced gypsum board produced according to EN 520. 77.66 sq m 2193.00 170308.38

• Tested to meet the safety requirements of EN 14190.

• Tested in accordance with EN 13501-1 to achieve minimum fire classification A2-s1,d0.

• Resistant to 90% RH and short term exposure for higher humidity.

• Non hazardous and fully recyclable.

The entire work shall be done as per design, drawings and direction of engineer in charge.

ACOUSTIC CLOUD CEILING: Supply and installation of 18 mm PET Panels with a density of 1850 gsm, material -100% polyester fibre,

100% recyclable and highly durable with GI U channel and clutch wire for hanging.

METAL CEILING: Providing & Fixing horizontal level metal grid ceiling comprising of Aluminium Lay-in Micro Perforated 600x600mm

(Nominal Size) tiles made of AA-3003-H14 (Tempered) grade Aluminium suitable for architectural finishes in 0.7mm thickness in color as per

selection with Square edge. Tile shall have perforation of hole diameter as 1.5mm and open area as 18%. The tile shall be electrostatically

polyester powder coated using RoHS compliant powder having coating. Back side of the tile shall have Soundtex fleece hot pressed

mechanically for uniform bonding to achieve NRC up to 0.7. The tile shall be laid on 15 mm wide T - section flanges colour as per selection

(matching to tile colour) having double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a

5.05 MR web height of 38mm (all sections). To comprise main runner spaced at 1200mm securely fixed to the structural soffit using suspension 25.08 sq m 2600.00 65208.00

system at 1200mm maximum. The First/Last suspension system at the end of each main runner shall not be greater than 450mm from the

adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall. Perimeter trim to be wall angles of size

3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum. Installation shall be carried out as per recommended

procedure. NOTE: RCP shoull be designed in a way so as to exclude any cut tile along the whole span.

Supply and fixing of Iceil - Translucent Ceiling - Supply of European Standard Premium PVC Membrane installed with Aluminium Profile.

PVC harpoon welded with high frequency on the perimeter of the membrane according to shape and size -Thickness of Membrane -

5.06 MR 0.18mm -Weight - 250 - 300 gsm +/- 2% -% of light transmission - 75.00% -Fire Rating - BS1D0 in accordance with EN 13501- 1. -Warranty - 53.87 sq m 6854.00 369224.98

10 years -No Heavy Metals - ROHS Certified -Manufactured in ISO 9001:2015 in India Size: ISPLAR 358. Price inclusive of Freight charges

Providing and fixing of metal vertical member framework of size 100mmx100mm for the double glass sliding door for the office entrances

5.07 MR finished in black as per design. The metal frame to be supported on the floor with floor plates of required size and the frame to terminate at 1.00 sq m 77467.00 77467.00

the true ceiling level. inclusive of material,fixing and labour.

Providing and fixing of metal frame work of size 50 x 12mm above display unit in the board room with 18mm ply shelf as per design with

necessary supports wherever required.inclusive of material,fixing and labour. ( size 3000mm H x 5300 W x 300mm depth )

Providing and fixing of metal frame work of size 25x25mm for planter box in the financial calling as per design with necessary suports

wherever required.inclusive of material,fixing and labour.

TOTAL FALSE CEILING WORKS 592430.37 1645898.86

6 FINISHING WORKS

Supply and fixing of ply packing of size 775mm H x75mm W from true slab above double glazing partition and storage units made out of

18mm plywood with necessary aluminium framework. The rate shall include all necessary cut for AC & duct for other services as mentioned

in detail drawings or as directed by the architect. Note: The above ceiling partitions shall be for all types of partitions provided with necessary

additional frames - plywood supports to ensure that the glass partitions and storage unit sections shall be properly held/supported to the

Aluminium sections of the above ceiling partitions for stability. Note: the partition shall be measured from false ceiling level to the true slab for

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

Supply and fixing of ply packing of required height from true slab (approx 775mm) above false ceiling made out of 18mm plywood with

necessary aluminium framework. Note: The above ply boxing shall be for all types of stretch ceilings provided with necessary additional

6.02 MR frames - plywood supports to ensure that the stretch ceilings shall be properly held-supported to the Aluminium sections of the above stretch 61.35 sq m 9564.00 586751.40

ceilings for stability. Note: the partition shall be measured from false ceiling level to the true slab for payment. Rate to include all necessary

Supply and fixing of ply packing of size 775mm H x75mm W from true slab above false ceiling cut outs for exposed ceiling and baffle

ceilings made out of 18mm plywood with necessary aluminium framework. The rate shall include all necessary cut for AC & duct for other

services as mentioned in detail drawings or as directed by the architect. Note: The above ceiling partitions shall be for all types of partitions

provided with necessary additional frames - plywood supports to ensure that the cut outs and baffled ceilings shall be properly

held/supported to the Aluminium sections of the above ceiling partitions for stability. Note: the partition shall be measured from false ceiling

level to the true slab for payment.

Supply and fixing of 100mm thick full height partition with necessary aluminium frame work made at intervals of 600mm center to center in

both horizontal and vertical directions. Frame work to be clad with 19mm plywood and finished with approved 4mm oak veneer and

melamine polish. Veneer to be clad with necessary 4mm grooves at joints finished with black polish and rock wool insulation to be provided.

Rate inclusive of all necessary hardware.

Supply and fixing of 100mm thick partitions with necessary aluminium frame work made at intervals of 600mm center to center in both

6.05 MR horizontal and vertical directions. Frame work to be clad with 19mm ply + 4mm MDF finished with texture paint as per selection and rock 207.65 sq m 8289.00 1721210.85

wool insulation to be provided. Rate to include all necessary hardwares. (Cost of texture paint not included)

Supply and fixing of half height partition in marketing calling area with necessary aluminium frame work made at intervals of 600mm center

to center in both horizontal and vertical directions. Frame work to be clad with 18mm Plywood finished with approved 4mm veneer and

melamine polish. Veneer to be clad with necessary 4mm grooves at joints finished with black polish and rock wool insulation to be provided.

Rate to include all necessary hardwares.

Supply and fixing of paneling (in cafe) with 12mm MDF and finished in laminate as per selection. Panel to be fixed on the wall in layers as

Supply and fixing of white oak beading of size 25mm x 25mm. Beading profile to be cut as per detail and polished to match oak finish

veneer. Beading to be fixed onto panel as per design detail.

Supply and fixing of solid wood beading of size 25mm x 18mm finished in black. Beading profile to be cut as per detail and polished to

match oak finish veneer. Beading to be fixed onto panel as per design detail.

Supply and fixing of solid wood beading of size 75mm x 18mm above half height partition finished in black. Beading profile to be cut as

per detail and polished to match oak finish veneer. Beading to be fixed onto panel as per design detail.

Supply and fixing of full height storage units (upto 450mm depth) made out of 18mm plywood finished with approved 0.8mm laminate on

6.11 MR the inside and 1mm laminate on the outside. Rate to include all hardwares including shelf pins, tower bolts, hinges, lock, handles etc. 36.77 sq m 27000.00 992790.00

Supply and fixing of full height storage units (upto 450mm depth) in the secretary cabin made out of 18mm plywood finished with

6.12 MR approved .8mm laminate on the inside and veneer on the outside. Veneer to be finished with melamine polish. Rate to include all hardwares 36.77 sq m 27000.00 992790.00

including shelf pins, tower bolts, hinges, lock, handles etc.

Supply and fixing of full height storage units (upto 600mm depth) made out of 18mm plywood finished with approved 0.8mm laminate on

6.13 MR the inside and 1mm laminate on the outside. Rate to include all hardwares including shelf pins, tower bolts, hinges, lock, handles etc. 11.12 sq m 30600.00 340272.00

Supply and fixing of storage units in the security area (upto 400mm depth) made out of 18mm plywood finished with approved 0.8mm

6.14 MR laminate on the inside and veneer on the outside. Veneer to be finished with melamine polish. Rate to include all hardwares including shelf 5.25 sq m 24000.00 126000.00

pins, tower bolts, hinges, lock , handles etc

Supply and fixing of overhead storage units (upto 300mm depth) made out of 18mm plywood finished with approved 0.8mm laminate on

6.15 MR the inside and veneer on the outside. Veneer to be finished with melamine polish. Rate to include all hardwares including shelf pins, tower 37.41 sq m 21000.00 785610.00

bolts, hinges, lock , handles etc

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

Supply and fixing of half height storage units (upto 400mm depth) in workstation made out of 18mm plywood finished with approved

6.16 MR .8mm laminate on the inside and veneer on the outside. Veneer to be finished with melamine polish. Rate to include all hardwares including 6.80 sq m 21000.00 142800.00

shelf pins, tower bolts, hinges, lock , handles etc

Supply and fixing of half height open storage unit in the studio room (upto 350mm depth) made out of 18mm plywood finished with

6.17 MR approved veneer. Veneer to be finished with melamine polish. Rate to include all hardwares including shelf pins, tower bolts, hinges, lock , 1.85 sq m 22500.00 41625.00

Supply and fixing of MD cabin loft unit of 450mm depth made out of 18mm plywood finished with approved 0.8mm laminate on the inside

6.18 MR and finished with with approved 4mm oak veneer and melamine polish. Veneer to be clad with necessary 4mm grooves at joints finished with 3.09 sq m 20250.00 62572.50

black polish. Rate to include all hardwares including shelf pins, tower bolts, hinges, lock, drawer channels, handles etc.

Supply and fixing of MD cabin tall unit of 700mmW x 1750H x 450mmD made out of 18mm plywood finished with approved 0.8mm

laminate on the inside and finished with with approved 4mm oak veneer and melamine polish. Veneer to be clad with necessary 4mm

grooves at joints finished with black polish. Rate to include all hardwares including shelf pins, tower bolts, hinges, lock, drawer channels,

Supply and fixing of MD cabin open shelf 450mm depth made out of 18mm plywood finished with approved 4mm oak veneer and

6.20 MR melamine polish. Veneer to be clad with necessary 4mm grooves at joints finished with black polish. Rate to include all hardwares including 2.06 sq m 25500.00 52530.00

shelf pins, tower bolts, hinges, lock, drawer channels, handles etc.

Supply and fixing of MD cabin undercounter unit of 450mm depth made out of 18mm plywood finished with approved 0.8mm laminate on

the inside and finished with with approved 4mm oak veneer and melamine polish. Veneer to be clad with necessary 4mm grooves at joints

finished with black polish. Rate to include all hardwares including shelf pins, tower bolts, hinges, lock, drawer channels, handles etc.

Supply and fixing of MD cabin coat rack unit of 450mm depth made out of 18mm plywood finished with approved 0.8mm laminate on the

inside and finished with approved 4mm oak veneer and melamine polish. Veneer to be clad with necessary 4mm grooves at joints finished

with black polish. The back board of the coat rack to contain hangers to hang coat. Rate to include all hardwares including shelf pins, tower

bolts, hinges, lock, drawer channels, handles etc.

Supply and fixing of MD cabin book rack unit of size: 1650mm H x 500mm W x 500mm D made out of 18mm plywood finished with 4mm

MDF finished in black. Rate to include all hardwares including shelf pins, tower bolts, hinges, lock, drawer channels, handles etc.

Supply and fixing of board room display unit (size 3000mm H x 5300 W x 300mm depth) made out of 18mm plywood finished with approved

6.24 MR 4mm oak veneer and melamine polish + Metal supports for open shelves finished in 1mm thick laminate to match the oak veneer. 4.64 sq m 25500.00 118320.00

Supply and fixing of general pantry under counter storage box of 600mm depth made out of 18mm plywood finished with approved

0.8mm laminate on the inside and finished with approved 4mm oak veneer and melamine polish. Veneer to be clad with necessary 4mm

grooves at joints finished with black polish. Rate to include all hardwares including shelf pins, tower bolts, hinges, lock, drawer channels,

handles etc. Rate to also include fixing of kitchen accessories like pull out dustbin and cutlery organiser.

Supply and fixing of General pantry overhead storage boxes of 300mm depth made out of 18mm plywood finished with approved 0.8mm

6.26 MR laminate on the inside and finished with approved 4mm oak veneer and melamine polish. ate to include all hardwares including shelf pins, 7.83 sq m 19500.00 152685.00

tower bolts, hinges, lock, drawer channels, handles etc.

Supply and fixing of Breakout space pantry under counter storage box of 600mm depth made out of 18mm plywood finished with

approved 0.8mm laminate on the inside and finished with approved 4mm oak veneer and melamine polish. Veneer to be clad with necessary

4mm grooves at joints finished with black polish. Rate to include all hardwares including shelf pins, tower bolts, hinges, lock, drawer

channels, handles etc. Rate to also include fixing of kitchen accessories like pull out dustbin and cutlery organiser.

Supply and fixing of Breakout space pantry overhead storage boxes of 300mm depth made out of 18mm plywood finished with

6.28 MR approved 0.8mm laminate on the inside and finished with approved 4mm oak veneer and melamine polish. ate to include all hardwares 2.06 sq m 19500.00 40170.00

including shelf pins, tower bolts, hinges, lock, drawer channels, handles etc.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

Supply and fixing of cafe pantry under counter storage box of 600mm depth made out of 18mm plywood finished with approved 0.8mm

laminate on the inside and finished with approved 4mm oak veneer and melamine polish. Veneer to be clad with necessary 4mm grooves at

joints finished with black polish. Rate to include all hardwares including shelf pins, tower bolts, hinges, lock, drawer channels, handles etc.

Rate to also include fixing of kitchen accessories like pull out dustbin and cutlery organiser.

Supply and fixing of 50mm thick concealed door in the board room. Door to be made out 36mm thick flush door clad with 8mm plywood

and finished with approved 4mm oak veneer and melamine polish on the inside and finished with approved 4mm thick MDF + texture paint

on the outside. Door thickness to be finished in solid wood beading polished to match the veneer.(size-1050widthx2400 height). Rate to

include all hardwares including handles, hinges, locks and concealed door closers etc

Supply and fixing of 50mm thick concealed door in the MD cabin. Door to be made out 36mm thick flush door clad with 8mm plywood and

finished with approved 4mm oak veneer and melamine polish on the outside and finished with approved 0.8mm thick laminate on the inside.

Door thickness to be finished in solid wood beading polished to match the veneer.(size-900widthx2400 height). Rate to include all hardwares

including handles, hinges, locks and concealed door closers etc

Supply and fixing of 1050 width x 2400 height x 36mm solid white oak door finished with selected oak finish laminate. Rate to include all

hardwares including handles, hinges, locks and door closers etc

Supply and fixing of 900 width x 2400 height x 36mm solid white oak door finished with selected oak finish laminate. Rate to include all

hardwares including handles, hinges, locks and door closers etc

Supply and fixing of 750 width x 2400 height x 36mm solid white oak door finished with selected oak finish laminate. Rate to include all

hardwares including handles, hinges, locks and door closers etc

Supply and fixing of 1200 width x 2400 height x 36mm solid white oak door finished with selected oak finish laminate. Rate to include all

hardwares including handles, hinges, locks and door closers etc

Supply and fixing of 1500 width x 2400 height x 36mm solid white oak double door finished with selected oak finish laminate. Rate to

include all hardwares including handles, hinges, locks and door closers etc

Supply and fixing of 2000 width x 2400 height x 36mm solid white oak double door finished with selected oak finish laminate. Rate to

include all hardwares including handles, hinges, locks and door closers etc

Providing and fixing of sliding banner screens for studio room of size 1200mmx2900mm. Banner to be fixed on 45mm thick flush door

finished in black

Supply and fixing of vanity box for the MD toilet area of 550mm height made out of BWR plywood finished with .8mm laminate on the

inside and 1mm laminate on the outside as per design.inclusive of material and labour.

6.40 MR Phonebooth cubicle interior fixed with foam and fabric panel as per design 22.00 sq m 1618.00 35596.00

Phonebooth cubicle 50mm thick table ledge made of 18mm ply with necessary MS framework finished with laminate and beading as per

design detail fixed to partition.

Supply and fixing of standing table for the break out space of height 1050mm made out of BWR plywood finished with approved 4mm thick

MDF + lacquer as per selection. Aluminium framework made at intervals of 600mm center to center in both horizontal and vertical directions.

6.42 MR Frame work to be clad with 18mm Plywood finished with 4mm MDF + paint as per selection. Leg made out of 18mm Plywood with required 1.00 LS 178770.00 178770.00

framework and finshed with 4mm MDF + paint to be provided on one side of the standing table and other side to be supported on the wall.

Price inclusive of material and labour.

Supply and fixing of seating of height 450mm for the break out space made out of BWR plywood finished with 4mm MDF + lacquer as per

selection.inclusive of material and labour.

Supply and fixing of seating of height 750mm for the break out space made out of BWR plywood finished with 4mm MDF + lacquer as per

selection.inclusive of material and labour.

Supply and fixing of storage unit of height 450mm for the break out space made out of BWR plywood finished with 4mm MDF+lacquer as

per selection.inclusive of material and labour.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

Supply and fixing of platform of height 75mm for the break out space made out of BWR plywood finished with 4mm MDF + lacquer as per

selection. inclusive of material and labour.

Supply and fixing of wall panelling for shaft opening made out of 18mm plywood finished with oak veneer and melamine polish as per

selection. Rate to include all necessary hardwares.

Supply and fixing of wall panelling for board room made out of 18mm plywood finished with oak veneer and melamine polish as per

6.48 MR selection. Panelling to have base framework made out of 12mmx25mm aluminium at intervals of 600mm center to center in both vertical and 55.37 sq m 12115.00 670807.55

horizontal directions. Rate to include all necessary hardwares.

Supply and fixing of wall panelling for columns made out of 12mm mdf + paint as per selection. Panelling to have base framework made out

6.49 MR of 12mmx25mm aluminium at intervals of 600mm center to center in both vertical and horizontal directions. Rate to include all necessary 22.25 sq m 12115.00 269558.75

Supply and fixing of wall panelling for MD cabin toilet wall made out of 18mm Plywood cladded with approved veneer finished with

6.50 MR melamine polish. Panelling to have base framework made out of 12mmx25mm aluminium at intervals of 600mm center to center in both 5.80 sq m 12115.00 70267.00

vertical and horizontal directions. Rate to include all necessary hardwares.

6.51 MR Providing and fixing of vinyl backed wall paper with brick cladding pattern as per design. 16.84 sq m 1275.00 21471.00

GLASS PARTITION (FIXED DOUBLE GLAZED GLASS PARTITION): Supply & Installation of Aluminum profile with top & bottom profiles

of size 82mm x 38mm in Natural Anodized / Black finish. Partition sides to be fixed with mullion and it's covers should be easily accesible

while removal of glass, if & when required. Glass to be fixed with suitable EPDM gaskets for insertion of combination of 10mm thick clear

toughened glass + 58 to 62 mm Air Gap + 12 mm thick clear Toughened Glass. Glass should not placed directly on profiles for giving more

strength. It should be placed on aluminium spacer profiles and spacers should be covered with cover profiles. Partition Glass joineries

6.52 MR consists of two-way Polycarbonate I-profiles, 90 Degree Polycarbonate L-Junction and Polycarbonate T-Junction profiles. Polycarbonate 180.78 sq m 15966.65 2886450.46

profile joineries to be fixed with double sided adhesive tape & profiles to be inserted in the joint instead of sealing it with sealants.

Polycarbonate profiles to be used to give continuity glass effect. Hardware for fixing profiles to be used as per manufacturer standard. Profile

& hardware should be from same brand to give end to end solution. Costs should be inclusive of necessary Hardware for fixing of profiles &

installation charges.

GLASS PARTITION (FIXED SINGLE GLAZED FULL HEIGHT GLASS PARTITION): Supply & Installation of Aluminum profile with top &

bottom profiles of size 82mm x 38mm in Natural Anodized / Black finish. Partition sides to be fixed with mullion and it's covers should be

easily accesible while removal of glass, if & when required. Glass to be fixed with suitable EPDM gaskets for insertion of 12thick clear

toughened glass. Glass should not placed directly on profiles for giving more strength. It should be placed on aluminium spacer profiles and

6.53 MR spacers should be covered with cover profiles. Partition Glass joineries consists of two-way Polycarbonate I-profiles, 90 Degree 280.86 sq m 13300.00 3735438.00

Polycarbonate L-Junction and Polycarbonate T-Junction profiles. Polycarbonate profile joineries to be fixed with double sided adhesive tape

& profiles to be inserted in the joint instead of sealing it with sealants. Polycarbonate profiles to be used to give continuity glass effect.

Hardware for fixing profiles to be used as per manufacturer standard. Profile & hardware should be from same brand to give end to end

solution. Costs should be inclusive of necessary Hardware for fixing of profiles & installation charges.

GLASS PARTITION (FIXED SINGLE GLAZED HALF HEIGHT GLASS PARTITION): Supply & Installation of Aluminum profile with top &

bottom profiles of size 82mm x 38mm in Natural Anodized / Black finish. Partition sides to be fixed with mullion and it's covers should be

easily accesible while removal of glass, if & when required. Glass to be fixed with suitable EPDM gaskets for insertion of 12thick clear

toughened glass. Glass should not placed directly on profiles for giving more strength. It should be placed on aluminium spacer profiles and

6.54 MR spacers should be covered with cover profiles. Partition Glass joineries consists of two-way Polycarbonate I-profiles, 90 Degree 24.66 sq m 14630.00 360775.80

Polycarbonate L-Junction and Polycarbonate T-Junction profiles. Polycarbonate profile joineries to be fixed with double sided adhesive tape

& profiles to be inserted in the joint instead of sealing it with sealants. Polycarbonate profiles to be used to give continuity glass effect.

Hardware for fixing profiles to be used as per manufacturer standard. Profile & hardware should be from same brand to give end to end

solution. Costs should be inclusive of necessary Hardware for fixing of profiles & installation charges.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

FRAMED HINGED GLASS DOOR: Supply & Installation of aluminium Door frame of 82X55mm and double glazed stile door frame of size

82x40 mm with necessary seals in natural anodized / black finish with specially designed Aluminium Hinges (5 Nos.) ) & Lever Handle in

Oval shape SS304 with SS 35mm Backset of 22mm Square Forend with Strike plate. Door should have Lock, oval escutcheons, strike

plate, EPC One Side Key other side knob-70mm and Geze Concealed Door closer with 12x20mm Sleek Track Channel with 320mm Small

Arm length. Door should have glass combination of 8mm toughened glass+Airgap + 8mm toughened glass and necessary seals to be

provided all around the door frames along with drop down seal. Profiles & Hardware should be from same brand to give end to end product.

Profile & hardware should be from same brand to give end to end solution. Cost should be inclusive of installation charges for Doors.

FRAMED HINGED GLASS DOOR:Supply & Installation of aluminium Door frame of 82X55mm and double glazed stile door frame of size

82x40 mm with necessary seals in natural anodized / black finish with specially designed Aluminium Hinges (5 Nos.) ) & Lever Handle in

Oval shape SS304 with SS 35mm Backset of 22mm Square Forend with Strike plate. Door should have Lock, oval escutcheons, strike

plate, EPC One Side Key other side knob-70mm and Geze Concealed Door closer with 12x20mm Sleek Track Channel with 320mm Small

6.56 MR Arm length. Door should have glass combination of 8mm toughened glass+Airgap + 8mm toughened glass and necessary seals to be 1.00 Nos 206150.00 206150.00

provided all around the door frames along with drop down seal. Profiles & Hardware should be from same brand to give end to end product.

Profile & hardware should be from same brand to give end to end solution. Cost should be inclusive of installation charges for Doors.

Supply and installation of Automatic Double Sliding door (1800x3000mm) operator ES 250 Pro Easy 4150mm opearator with double Sliding

compliant with European standards and produced according to the guidelines for power-operated windows, doors and gates, BGR 232, the

UVV and the VDE regulations. TÜV design tested for 1 Million Cycle of opeartion in accordance with low voltage guidelines of IEC /EN

60335-2-103 and fulfils EN 16005 and DIN 18650-1 / DIN 18650-2 standards. The Profile Finish should be Silver Anodized E6/C0, with

operator dimensions (H x D) not exceeding 150 x 180 mm and of length as required to suit the opening size given below. dormakaba ES250

Pro Easy Operators are with very sturdy design , Self balancing Panel suspension system and with Anti-Jump fitting. The track profile should

be separate from the main profile for enabling reduction in vibration insulation, With Optional backplate for easy Installation. 16 bit intelligent

Microprocessor-controller unit should be handled without any external handheld unit , Self-learning, with adjustable parameters for opening

and closing speed with an incremental value of 10cm/sec , Max. 30 Sec. hold-open time and opening and closing force, reversing when

6.57 MR obstruction is encountered, with SMPS, Class of protection IP 20. The Max. opening and close force by the opeartor should not exceed 3.00 Nos 300000.00 900000.00

150N and Max. Power consumption doesnot exceed 180W during opeartion mode. The operator is used with EM failsafe lock The optional

activators are via Nemo Combi sensor sensor with 2x Microwave for activation and double rows of 24 spots failsafe Safety infra curtains

without the need of Photocell. Program Switch with Knob, ES 250 Pro Easy, Max Panel Weight Carrying Capacity of 2 X 125 Kgs. The

system shall have constant power supply 230V+ 5%, 50Hz, AC. The Opeartor is combined with dormakba ST-Flex Profile System suitable

to hold 12mm Toughned Glass with correct size of rubber gaskets. The profile size not exceeding 30x47 mm and ST Flex has Valid

Environmental Product Declartaion Certification as per ISO 14025 and 15804. The Operator assembly / production units must fulfill valid

quality management systems of ISO 9001: 2015 and also have Environmental Management System of ISO 14001: 2015 Certifications for

product approval.Automatic door operator includes Key Programme switch , cable, Both side sensor, EM Lock.

ITALIAN MARBLE: Providing and laying machine cut, mirror polished, Italian Marble brass brass inlay stone flooring laid in required pattern

in linear portion of the building all complete as per architectural drawings, with 18mm thick stone slab laid over 20mm (average) thick base of

6.58 11.51 cement mortar 1: 4 (1 cement: 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement

slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed

by the Engineer-in-Charge.

11.51.1 18 mm thick Italian Marble stone slab in all colour and shade 50.00 sq m 6603.35 330167.50

6.59 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 390.33 sq m 262.70 102539.69

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali

& fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives

New work (Two or more coats applied @ 1.43 litre/10 sqm) over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-CIVIL

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

Providing and fixing of 6mm thick annealed SGG Planilaque Evolution (premium GRIHA rated lacquered glass from Saint-Gobain) of

approved color by Architect/ Client / Customer, fixed with SGG ULTRAFIX (compatible neutral core silicon/ double sided tape) on a

perfectly leveled 12mm thick water proof marine plywood / MDF / Mineral fibre board which is mounted on the RCC wall/any other structure.

Lacquered glass must be made industrially (via curtain coating process); opaque (if viewed against a support wall), coated with PU lacquer

6.61 MR (50 micron thick); color consistency (measured by Minolta spectrophotometer CM5081); highly durable (passes PERSOZ hardness test for 33 sq m 5112.00 168696.00

minimum 220 oscillatios); humid resistant (conforms to BS EN 1036 1999); environmentally friendly (no lead, no arsenic, no copper,

noformaldehyde); appropriate recycled content (12% post industrial/ 6% post consumer); compressive strenght (1000 MPa) & tensile

strength (40 MPa), same as float glass;

Providing and fixing Toilet Cubicles with the following specifications

Thickness of Compact Laminate : 12 mm

Color of HPL Boards: As approved by Engineer-in-charge

Size of Cubicle : As per Drawing

Door Size : 1935mm (H) x 600mm (W)

Divider Size : 1550x1935mm

Overall Height Of Cubicle : 2100mm (Including bottom Gap of 150mm)

Accessories: Stainless Steel - 304 Grade accessories)

a) SS "U" & Door Stopper Channel

6.62 MR b) SS “F” channel (Only Corner Unit) 30 Nos 29720.00 891600.00

c) SS Coat Hook

d) SS Privacy Thumb turn c/w Occupancy Indicato

e) SS Door Knob

f) SS Spring Loaded Butt Hinges with Cover

g) SS Shoe Box Leg 18mm - 316 Grade

h) Rubber Lining for Groove

i) S.S.Screws 304 G & P .V.C Wall Plugs

j) SS Door Stopper Channel

SPECIAL NOTE - Warpage Criteria is 3.0 mm/1000mm for MRS panels as per EN standard- 438

ECORESIN PANEL: Providing of Ecoresin panel of size 1220mm x 2440mm with variety of inlay between panels of specified Gauge. The

panels are made from ecoresin sheet with engineered polyester resin with a thickness of 6 / 9.5 mm (+/- 5%)with a top/bottom finish as

sandstone finish. The product conforms to Class A impact rating in accordance with ANSI Z97.1-2004 at 1/8” thickness, has no detectable

6.63 MR VOC off-gassing as measured under ASTM standards D 5116 and D 6670, is GreenguardTM Indoor Air Quality certified and has a minimum 2 each 450000.00 900,000.00

of 40% post-industrial recycle content certified by a recognized 3rd party certification group, such as Scientific Certification Systems (SCS).

The design of the product is based on Varia produced with ecoresinTM as approved make of Hunter Douglas as per specification & approval

of Engineer-in-charge as per tender drawing.

TOTAL FINISHING WORKS 503454.50 26243044.93

7 SHOP DRAWINGS

7.01 MR Providing of 3D Views, Concept presentation and Renders 1.00 LS 618183.65 618183.65

7.02 MR Providing of all GFC drawings for civil and interior works 1.00 LS 618183.65 618183.65

7.03 MR Providing of all shop drawings and as built drawing for MEP and services. 1.00 LS 1368183.65 1368183.65

TOTAL SHOP DRAWINGS 2604550.95

Digitally signed by RAJ PAL

PROPOSED OFFICE INTERIOR OF GS-1 PROJECT AT NEW DELHI

SCHEDULE OF QUANTITIES: ELECTRICAL

S No DSR No/ MR DESCRIPTION OF ITEM QTY. UNIT RATE DSR AMOUNT NDSR AMOUNT

DISTRIBUTION LT PANELS

The Rates of Main Panel/ Distribution Panels shall include the followings conforming to specifications, BOQ & Drgs. as well.

All Intelligent ACB shall have Micro processor based O/C, S/C & E/F release with MODBUS RTU on RS485 on board two way communication

a) port and shall have Ics=Icu=Icw=65KA for 1Sec

All MCCB shall have ICS = 100% ICU with Positive Isolation feature & shuold have Line Load reversibility.

Descrimination between ACB, MCCB & MCB up to the level of downstream devices's Icu level shall be ensured with the help of descrmination

carts & peak cut off curves. Any change in ratings in order to ensure discrimination will be in scope of bidder only.

All Intelligent ACB'S shall have spare wired contacts for ON,OFF,Trip,rackin,rackout spring charge status for SCADA communication along with

d) LCD display.

The LT Panel manufacturer shall provide necessary Aux. contacts; multiply those contacts in the respective panels to hook up in to PLC system

f) All ACBs should be with ready to close contact

All ACBs of main panel should have Power metering with combined accuracy (CT + Display) of 1% (for current) & should also have protections of

Under/over voltage, Over/under Frequency, Reverse Power, Voltage inbalance & phase reversal unless specified specificly in BOQ

All MCCBs should have provision of release interchangebility for future upgradation purpose.

NOTE: All panel shall be completely modular and compartmentalized with Form 3B Separation. The panel shall be free standing floor mounted

type . The panel shall be PTTA type.

Supplying, Installation, Testing and Commissioning of dust, damp and vermin proof free floor standing factory built sheet steel enclosed modular

construction extendable panel, suitable for operation on 415 + 10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square

tubular section and covered with 2.0mm thick CRCA sheet, hinged doors of 2mm thick CRCA sheet, duly painted complete with aluminium bus

bars, interconnection with solid copper conductor wires / aluminium strips, neutral links, earth bus etc. necessary metering protections &

indications and mounted with the following as per drawing and technical specifications attached etc. complete as required.

1 No. - 320Amp. 35ka FP microprocessor release, MCCB (Ics=lcu) with O/L, S/C & earth fault protection.

Bus Section shall be 400 amps 4P busbar chamber of suitable length with aluminium bus bars. All bus bars and interconnections shall be of

suitable size Aluminium busbar, current density of Aluminium shall not be more than 0.8 Amps/ sq.mm cross sectional area of Bus Bar, Provide

100% capacity for neutral bus bar.

1 Set of Digital multi function meter (Neptune M9/Schneider EM6400/Siemens PAC8000) with 125/5A CTs,CT shorting links R/Y/B LED indicating

lamps and 2A control SP MCBs

ON & 'OFF' indication LED Lamps with controlled MCB. - 1 Set

160 Amps 4P MCCB (35 kA), terminals shall be suitable for cable connection on one side and Bus bar connection on other side. 3 Nos.

100 Amps 4P MCCB (25 kA), terminals shall be suitable for cable connection on one side and Bus bar connection on other side. 3 Nos.

63A FP MCB '10kA' - 12 Nos.

MAIN LT PANEL complete as above 1 Set 185000.00 185000.00

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: ELECTRICAL

S No DSR No/ MR DESCRIPTION OF ITEM QTY. UNIT RATE DSR AMOUNT NDSR AMOUNT

Supplying, Installation, Testing and Commissioning of dust, damp and vermin proof free floor standing factory built sheet steel enclosed modular

construction extendable panel, suitable for operation on 415 + 10% volts, 50 Hz AC 3 phase 4 wire system fabricated out of suitable sized square

tubular section and covered with 2.0mm thick CRCA sheet, hinged doors of 2mm thick CRCA sheet, duly painted complete with aluminium bus

bars, interconnection with solid copper conductor wires / aluminium strips, neutral links, earth bus etc. necessary metering protections &

indications and mounted with the following as per drawing and technical specifications attached etc. complete as required.

2 Nos. - 160Amp. 35ka FP microprocessor release, MCCB (Ics=lcu) with O/L, S/C & earth fault protection.

Bus Section shall be 200 amps 4P busbar chamber of suitable length with aluminium bus bars. All bus bars and interconnections shall be of

suitable size Aluminium busbar, current density of Aluminium shall not be more than 0.8 Amps/ sq.mm cross sectional area of Bus Bar, Provide

100% capacity for neutral bus bar.

2 Sets of Digital multi function meter (Neptune M9/Schneider EM6400/Siemens PAC8000) with 125/5A CTs,CT shorting links R/Y/B LED

indicating lamps and 2A control SP MCBs

ON & 'OFF' indication LED Lamps with controlled MCB. - 2 Sets

63A FP MCB '10kA' - 12 Nos.

UPS PANEL complete as above 1 Set 115000.00 115000.00

AUTOMATIC FIRE DETECTION AND SUPPRESSION SYSTEM WITH Novec1230 Gas

A) FIRETRACE TUBE SYSTEM :

NOVEC 1230 Panel Flooding System

Supply, fixing, testing and commissioning of Automatic Linear Pneumatic Tube Detection based Novec 1230 System for Electrical Panels of

approved make, consisting of the following components: UPS PANELS , Leangth 800 mm, Depth 350, Height 800 mm

2.5 LB capacity Novec 1230 or equivalent approved make, DLP Assembly with automatic valve, push in connector for tube, 2.5 LB Novec 1230

gas, mounting bracket, End of Line adopter and low pressure switch for monitoring system activation.

Linear Pneumatic Heat Detection Tube of approved make with all necessary fittings & supports etc. complete as required.

5 MR Audio Visual Alarm 2 Nos 1500.00 3000.00

SUPPLY OF LT CABLES AND CABLE ACCESSORIES WORKS

Supply of following size of 1.1KV grade multicore aluminium conductor XLPE insulated & PVC sheathed armoured power cable as per IS: 7098

6 (Part-1) 1988 complete as required.

c) MR 4 x 25 sq. mm cable 80 Mtrs. 330.00 26400.00

f) MR 4 x 6 sq. mm cable 325 Mtrs. 212.00 68900.00

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: ELECTRICAL

S No DSR No/ MR DESCRIPTION OF ITEM QTY. UNIT RATE DSR AMOUNT NDSR AMOUNT

Supply, installation, effecting proper connection testing and commissioning of the following size copper wires as required.

50 sq. mm Single core cable in PVC conduit including and termination on both ends.

Supplying & fixing of 2 Nos. RJ-45 modular type Computer sockets outlets alongwith modular duplex plate & modular Hot dip galvanised box in

8 MR recessed/surface steel conduit etc as required. (For Computer Nodes) 136 Nos. 1327.00 180472.00

Supplying & fixing of RJ-45 modular type Computer sockets outlets alongwith modular plate & modular Hot dip galvanised box in

9 MR recessed/surface steel conduit etc as required. (For Computer Nodes) 80 Nos. 875.00 70000.00

Supply and fixing following pairs tag blocks (crone connector type) duly housed in M.S. enclosure etc. as required.

Supplying and drawing following pair, 0.6 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/

11 recessed steel/ PVC conduit as required.

Supplying and drawing co-axial TV cable RG-11 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and

protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Floor Trunking: Design manufacture, supply and fixing in position the Box type Floor Trunking made out of heavy duty extruded aluminium. The

quoted rates shall be inclusive of floor cutting and making the surface good as required or fixing on wall with box fasteners etc as required.

LAYING OF CABLES AND CABLE ACCESSORIES WORKS

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including

14 7.1 excavation, sand cushioning, protective covering and refilling the trench etc as required.

Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size on cable tray as required.

a) 7.8.1 Upto 35 sq. mm (clamped with 1mm thick saddle) 980 Mtrs. 45.00 44100.00

Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS Flat Clamp)

Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS Flat Clamp)

Supplying and making cable end termination with brass compression glands and aluminium lugs including inhibiting compound to be used in

each lug, for the following XLPE aluminium conductor armoured cables of 1.1 KV grade etc, complete as required.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: ELECTRICAL

S No DSR No/ MR DESCRIPTION OF ITEM QTY. UNIT RATE DSR AMOUNT NDSR AMOUNT

Supplying and installing following size of perforated Hot Dipped,Galvanised Iron cable tray (galvanisation thickness not less than 50 microns)

with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling/shaft with G.I. suspenders

including G.I. bolts & nuts, etc. as required & approved by the Engineer Incharge. (Quantity shall be confirmed at site as per final layout/ route/

17 4.6 application etc. & to be executed accordingly.)

a) 4.6.4 300 mm width X 50 mm depth X 1.6 mm thickness 30 Mtrs. 963.00 28890.00

b) 4.6.2 150 mm width X 50 mm depth X 1.6 mm thickness 120 Mtrs. 716.00 85920.00

c) 4.6.1 100 mm width X 50 mm depth X 1.6 mm thickness 30 Mtrs. 669.00 20070.00

Providing and Fixing M.V. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on

18 2.21 both sides, and with inscription in single red colour on front side as required. 2 Nos. 269.00 538.00

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1

cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS

14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, omplete as required.

a) 14.15.1 63 mm dia (OD-63 mm & ID-51 mm nominal) 0 Mtrs. 127.00 0.00

b) 14.15.2 90 mm dia (OD-90 mm & ID-76 mm nominal) 0 Mtrs. 170.00 0.00

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40

mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and

making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating

21 Civil DSR 19.7 coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. Cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and

i) frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :

Civil DSR With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated

22 1.3.3 copper conductor single core cable etc. as required. (Group-C) 300 Point 1,845.00 553500.00

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit

alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: ELECTRICAL

S No DSR No/ MR DESCRIPTION OF ITEM QTY. UNIT RATE DSR AMOUNT NDSR AMOUNT

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed Steel conduit

alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in

25 1.7 surface/ recessed Steel conduit as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A

27 1.31 modular socket outlet and 5/6 A modular switch, connections etc. as required. 10 Each 477.00 4770.00

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 &

15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin

5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular

socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP,

MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and

31 2.18 commissioning etc. as required. 10 Each 1,621.00 16210.00

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve,

TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing

32 2.20 and commissioning etc. as required. 0 Each 4,107.00 0.00

Supplying and fixing of following sizes of Steel conduit along with accessories in surface/recess including painting in case of surface conduit, or

cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Data and TV points

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: ELECTRICAL

S No DSR No/ MR DESCRIPTION OF ITEM QTY. UNIT RATE DSR AMOUNT NDSR AMOUNT

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing

36 1.18 surface/ recessed steel/ PVC conduit as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and

protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular

38 1.24 plate etc. as required.

a) 1.24.7 TV antenna socket outlet 6 Each 148.00 888.00

b) 1.24.6 Telephone socket outlet 0 Each 148.00 0.00

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in

40 1.22 front including painting etc. as rquired.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC

41 1.17 conduit as required.

a) 1.17.2 2 x 1.5 Sq. mm (For Fire Alarm System) 0 Mtrs. 41.00 0.00

DISTRIBUTION BOARDS & MCB

Distribution Board

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned

copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

a) 2.3.1 6 Way, Double Door 0 Each 2,206.00 0.00

b) 2.3.3 12 Way, Double Door 0 Each 2,315.00 0.00

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess,

complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required.

43 2.4 (But without MCB/RCCB/ Isolator)

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected,

duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and

incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: ELECTRICAL

S No DSR No/ MR DESCRIPTION OF ITEM QTY. UNIT RATE DSR AMOUNT NDSR AMOUNT

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the

existing MCB DB complete with connections, testing and commissioning etc. as required.

b) 2.10.4 Triple Pole 4 Each 826.00 3304.00

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning

46 2.12 etc. as required.

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc.

47 2.13 as required.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity

current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240

50 2.23 Volts, on surface/ recess, complete with testing and commissioning etc. as required. 0.00

a) 2.23.2 For 8 way, Double door SPN MCBDB 0 Each 832.00 0.00

b) 2.23.4 For 14 way, Double door SPN MCBDB 0 Each 902.00 0.00

Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415

51 2.24 Volts, on surface/ recess, complete with testing and commissioning etc.as required.

a) 2.24.1 For 4 way, Double door TPN MCBDB 0 Each 1,080.00 0.00

b) 2.24.2 For 6 way, Double door TPN MCBDB 3 Each 1,124.00 3372.00

2.24.3 For 8 way, Double door TPN MCBDB 5 Each 1,340.00 6700.00

Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts,

52 2.25 on surface/ recess, complete with testing and commissioning etc. as required. 5 Each 764.00 3820.00

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing

cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting

DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight (Auto ON, Auto OFF, Auto modes) with manual override

facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required.

a) 15.4.3 3 output (1output per phase) and suitable for three phase supply 0 Each 8831.00 0.00

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: ELECTRICAL

S No DSR No/ MR DESCRIPTION OF ITEM QTY. UNIT RATE DSR AMOUNT NDSR AMOUNT

EARTHING AND EARTH CONDUCTOR

Providing and fixing 6 SWG dia. G.I. wire on surface or in recess for loop Earthing along with the existing surface / recessed conduit / submain

55 5.18 wiring / cable as reqd. 0 Mtrs. 42.00 0.00

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having

locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having

locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection / termination with GI

58 5.7 thimble etc. as required. 0 Mtrs. 51.00 0.00

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring,

59 5.10 washer excavation and re-filling etc. as required. 15 Mtrs. 1551.00 23265.00

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer

60 5.11 excavation and re-filling etc. as required. 0 Mtrs. 706.00 0.00

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm GI strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

UPS & INVERTER SYSTEM

Supply, installation, testing and commissioning of 60 KVA, Three phase input, Three phase out put, ON Line UPS system with 30 mintues SMF

battery back up with each (full load) complete with SMF batteries with powder coated MS cabinet including all accessories etc. as required.

65 MR (MAKE: APC, Eaton, Vertiv, Socomec) 2 Nos. 950000.00 1900000.00

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: LIGHT FIXTURE & FANS

S No DSR/ MR Item Description Qty UOM Rate NDSR Amount

SITC of customized Linear Light as an integrated solution that combines high-performance lighting with bespoke Endcaps with an illuminated GS1 logo on both ends. The body color needs to be Dead Matte

Black. The light should be jointless 8ft long to ensure a seamless design that eliminates aesthetic inconsistencies or light leakages. The suspension system & electrical wire needs to be all-black in color.

CCT - 3000 or 4000 or 5700 Kelvinas per architect recommendations.

Length: 2400 mm

Light body: Made of extruded aluminum, ensuring lightweight and high heat dissipation for the light engine.

End Caps: Should be made of Diecast Aluminium or ABS.

High-Efficiency DALI compatible Light Engine utilizing LEDs with > 140 lumens per watt

Wattage: 70 watts

Prismatic Diffuser mandatory.

SITC of customized Linear Soft Edged Loop Light as an integrated solution that combines high-performance lighting with Body color as per the architects requirement. The suspension system & electrical

wire needs to be all-black in color. The external Driver canopy should be finished in black to match the ceiling. CCT - 3000 or 4000 or 5700 Kelvin as per architect recommendations.

Length: 1000 mm

Wattage: 50 watts

Light body: Made of extruded aluminum, ensuring lightweight and high heat dissipation for the light engine.

High-efficiency non-dimmable Light Engine utilizing LEDs with > 140 lumens per watt and electronic driver with THD < 10%

Suspension system lengths as per site requirements.

Frosted Diffuser

Design, manufacture, supply, installation, and commissioning of a customized plain translucent ceiling-mounted light box. The light box will be installed as per the architectural requirements and must meet the

following technical specifications. The light box will be ceiling-mounted, sized as approved by the architect. The light box should have a uniform depth of 250 mm, with its bottom edge positioned 70-100 mm

lower than the gypsum ceiling level.

Structure: The side walls of the light box will be constructed by the GC as per the recommendations of the lighting vendor. Light box should be made from 18 mm thick moisture and termite-resistant plywood

or HDDMR (High-Density High-Moisture Resistant Board), as approved by the architect. The roof of the light box shall also be made of the same moisture and termite-resistant plywood or HDDMR board.

The outer surface and edges of the light box shall be finished as per the architect's recommendations and will be the responsibility of the General Contractor (GC).

Interior Finish: The inner side of the light box shall be primed and painted in matte white for even light reflection. The light box must be fabricated on-site to fit the exact dimensions and compatibility with the

Thermal Management: Before installing the LED light engine, the interior of the light box must be equipped with Thermal Interface Material for optimal heat dissipation. Thermally conductive metal sheets

should be securely attached to the interior roof of the wooden box to further enhance heat dissipation.

LED Light Engine (10-15 watts/Sq Ft): The light engine must be non-dimmable. The color temperature (CCT) shall be customizable, offering the client four options to choose one from: 3000K, 4000K,

5700K and 6500K. The input voltage for the light engine must be 24V and should have a protection rating of IP20. All LED drivers should be installed outside of the light box, in an easily accessible location

for maintenance purposes.

3 MR Diffuser: A jointless translucent diffuser made from polyester knitted fabric coated with polyurethane (PU) must be installed inside the light box, approximately 20-30 mm up from the bottom edge of the 700 Sq Ft 2593.50 1815450.00

structure. The remaining 20-30 mm exposed surface outside the diffuser should be finished to match the color of the light box’s outer surface and edges. The diffuser fabric should be: Heavy-duty, with a

minimum weight of 200 gm/m² and a minimum thickness of 0.3 mm. Matte, smooth, and uniform in appearance to reduce glare and provide a soft ambient glow even at higher lux levels. It should have a light

transmission efficiency of 50-60%, ensuring low-glare, soothing ambient lighting. The diffuser must meet the following technical specifications: Tear strength: CH: 4.5 daN; TR: 6.5 daN Fire rating: B-S1, d0

Humidity-resistant and free from harmful CMR (Carcinogenic, Mutagenic, Reprotoxic) substances and VOC (Volatile Organic Compounds).

Installation Requirements

Mounting and Integration: The light box will be securely mounted to the ceiling, maintaining the required depth and alignment. All wood work related labor, wood, mounting hardware, fasteners, and

accessories must be arranged by the GC.

SITC of customized Circular Disc Light as an integrated solution that combines high-performance lighting with the Light Body & Suspension Pipe color as per the architect's requirement. The suspension

system needs to be made of a 20 mm Dia pipe through which electrical wire needs to run internally. The external Driver canopy (if needed) should be finished to match the ceiling color. CCT - 3000 or 4000

or 5700 Kelvinas per architect recommendations.

Outer Diameter: 1200 mm

Visible Width of Lip on which Diffuser will rest: >30 & <50 mm or if the lip is slimmer, it should be tapered upwards. The height of the Profile (Thickness of Light) should be <100 mm & >70

Light body: Made of extruded aluminum, ensuring lightweight and high heat dissipation for the light engine.

High-efficiency non-dimmable Light Engine utilizing LEDs with > 140 lumens per watt and electronic driver with THD < 10%

Wattage: 70 watts

Prismatic Diffuser

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: LIGHT FIXTURE & FANS

S No DSR/ MR Item Description Qty UOM Rate NDSR Amount

SITC of customized Linear Curvy Light as an integrated solution that combines high-performance lighting with with built as per as-built drawings. Body color as per the architect's requirement. The flow of the

curve to be decided based on as-built drawings shared by the GC. The suspension system & electrical wire needs to be all-black in color. The suspension points are to be decided according to as-built

drawings. The external Driver canopy (if needed) should be finished to match the ceiling. CCT - 3000 or 4000 or 5700 Kelvin as per architect recommendations.

Length: as per as-built drawing. (qty mentioned here is tentative)

Wattage: 30 watts/Mtr

Light body: Made of metal, ensuring lightweight and high heat dissipation for the light engine.

High-efficiency non-dimmable Light Engine utilizing LEDs with > 140 lumens per watt and electronic driver with THD < 10%

Suspension system lengths as per site requirements.

Frosted Diffuser

SITC of customized Linear Loop Light as an integrated solution that combines high-performance lighting with built as per as-built drawings. Body color as per the architects requirement. The flow of the curve

to be decided based on as-built drawings shared by the GC. The suspension system & electrical wire needs to be all-black in color. The suspension points are to be decided according to as-built drawings.

The external Driver canopy (if needed) should be finished to match the ceiling. CCT - 3000 or 4000 or 5700 Kelvinas per architect recommendations.

Length: as per as-built drawing. (qty mentioned here is tentative)

Wattage: 30 watts/Mtr

Light body: Made of metal, ensuring lightweight and high heat dissipation for the light engine.

High-efficiency non-dimmable Light Engine utilizing LEDs with > 140 lumens per watt and electronic driver with THD < 10%

Suspension system lengths as per site requirements.

Frosted Diffuser

SITC of customized Cylindrical Pendant Light as an integrated solution that combines high-performance lighting with tailored size and finish. The suspension system & electrical wire needs to be all-black in

color. LED Driver to be housed in separate ceiling canopy for longer life protecting the Driver and COB from each other dissipated heat. CRI - 90. CCT - 3000 or 4000 or 5700 Kelvin, as per architect

recommendations. Sketch Lighting make Lavender Blade 12 watts or similar from approved makes.

Cylinder Housing Dimensions:

Dia: 80-90 mm with 36-40 degree beam angle.

Height - 150-160 mm

7 MR Wattage: 15 Watts 26 Nos 2992.00 77792.00

Light body: Made of aluminum, ensuring lightweight and high heat dissipation for the light engine.

Powder coated in Matte Black color

High-efficiency non-dimmable electronic Light Engine utilizing COBs with > 140 lumens per watt and electronic driver with THD < 10%

Suspension system lengths as per site requirements.

Clear Glass HE reflector optics with 36-40 degree beam angle.

SITC of Recessed 12 Watts Downlight with glare-free black deflector and honeycomb mesh. CRI - 90. CCT - 3000 or 4000 or 5700 Kelvinas per architect recommendations. With Narrow <6mm Trim for a

neat look post installation. Sketch Lighting make Lavender Blade 12 watts or similar from approved makes.

Housing Dimensions:

Dia: <90 mm with 36-40 degree beam angle.

Height - <100 mm

Wattage: 12 watts

Light Housing: Made of diecast aluminum, ensuring lightweight and high heat dissipation for the light engine.

Powder coated in Matte White color on the outside and Lip.

High-efficiency non-dimmable electronic Light Engine utilizing COBs with > 140 lumens per watt and electronic driver with THD < 10%

Suspension system lengths as per site requirements.

Clear Glass HE reflector optics with 36-40 degree beam angle.

SITC of customized Linear Light as an integrated solution that combines high-performance lighting with Dead Matte Black End Caps. The body color needs to be Dead Matte Black. The light should be

jointless 8ft long to ensure a seamless design that eliminates aesthetic inconsistencies or light leakages. The suspension system & electrical wire needs to be all-black in color. CCT - 3000 or 4000 or 5700

Kelvinas per architect recommendations.

Length: 2400 mm

Wattage: 70 Watts

Light body: Made of extruded aluminum, ensuring lightweight and high heat dissipation for the light engine.

End Caps: Should be made of Metal or ABS.

High-Efficiency DALI compatible Light Engine utilizing LEDs with > 140 lumens per watt

Suspension system lengths as per site requirements.

Prismatic Diffuser mandatory.

SITC of DALI compatible customized Designer Light developed taking inspiration from the 3D render. The body color needs to be Dead Matte Black. The tentative span of light to be 600-900 mm in Dia. The

suspension system & electrical wire needs to be all-black in color. CCT - 3000 or 4000 or 5700 Kelvin as per architect recommendations. Wattage: 30-40 Watts

Recessed mounting size: 11.7 x 37.4 (mm)

standard length : 2 mtrs (aluminium profile)

12 MR 100W NON DIMMABLE DRIVER 12V 33 Nos 2632.00 86856.00

MAGNETIC TRACK RECESSED TRIMLESS

14 MR TRACK CONNECTOR (RECESSED) 4 Nos 2267.00 9068.00

15 MR CURRENT-CONNECTOR 4 Nos 2413.00 9652.00

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: LIGHT FIXTURE & FANS

S No DSR/ MR Item Description Qty UOM Rate NDSR Amount

LED MAGNETIC LINEARS

16 MR CREE LED | IP 20 | 70 L/W | CRI ≥ 90 | DC - 24V | WARRANTY - 3 YEARS | LIFETIME - 50,000 HOURS | TOTAL LUMEN - 1300 8 Nos 4242.00 33936.00

BEAM ANGLE - 100 ° DEGREE | BODY : DIE CAST ALUMINIUM | BODY COLOR : BLACK | INSTALLATION : CLIP UP SYSTEM

BODY Size : LENGTH - 600, WIDTH - 10, HEIGHT - 18 (MM) | COLOR : NW-4K, WW-3K

LED MAGNETIC LINEAR SPOT

17 MR CREE LED | IP 20 | 70 L/W | CRI ≥ 90 | DC - 24V | WARRANTY - 3 YEARS | LIFETIME - 50,000 HOURS | TOTAL LUMEN - 500 BEAM ANGLE - 30 ° DEGREE | BODY : DIE CAST ALUMINIUM | BODY 4 Nos 3291.00 13164.00

COLOR : BLACK | INSTALLATION : CLIP UP SYSTEM

BODY Size : LENGTH - 100, WIDTH - 10, HEIGHT - 18 (MM) | COLOR : NW-4K, WW-3K

18 MR 100W NON DIMMABLE DRIVER 24V 2 Nos 2518.00 5036.00

Installation, testing and commissioning of following pre-wired, LED fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC

insulated, copper conductor, single core cable and earthing etc. as required.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES- PLUMBING

DSR-2023/ E & Amount (Rs.)

S No Description Unit Qty. Rate (INR)

M DSR-2022/ DSR NDSR

1 MR SOIL WASTE, VENT PIPES AND FITTINGS

Providing, fixing, testing and commissioning of SWR uPVC pipes (Type-B) confirming to IS

13592: 1992 complete with all fittings e.g. plain or door bends, junctions, cowls, offsets, access

pieces etc. jointing with rubber rings and solvent cement including fixing the pipes on wall face

with MS galvanized holder bat clamps or suspended below ceiling with MS galvanized

hangers/supports and fasteners all as approved by the engineer in charge including Cutting holes

1.1 in walls, floors excavation, refilling and disposal of surplus earth wherever required and making

MR good . The rates shall be inclusive of painting of all supports and clamps with a coat of red oxide

primer and two or more coats of synthetic enamel paint of approved colour and Quality to give

an even shade including surface preparation.(Sample of holder bat clamps,hangers / supports to

be approved by the Engineer-in-Charge.)

a) 110 mm diameter Metre 70 1050.00 - 73500.00

Providing, fixing, testing and commissioning uPVC Pipes confirming to IS 4985 : 2000) pressure

1.2 6kg/cm2 including jointing with solvent cement, testing excavation, refilling and disposal of

MR surplus earth wherever required complete in all respect.

(a) 40mm nominal bore Metre 25 450.00 - 11250.00

(b) 50mm nominal bore Metre 15 550.00 - 8250.00

Providing and fixing sand PVC trap (P trap) of self cleaning design as complete including cost of

MR cutting and making good the cutouts in walls and floors etc. complete.

a) 110 mm inlet and 110 mm outlet Each 25 2300.00 - 57500.00

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1: 2: 4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Providing and jointing of 110mm dia UPVC Inlet Fitting for making connection of UPVC waste

pipes 40/50mm (NB) from washbasins. The rates shall include providing 100 mm x 50 mm x

50mm cross tee with floor trap and sealing the joints with gap between cross tee with floor

trap. The rates also include concreating al-around the trap and inlet fittings after fixing of waste

pipes with cement concreate 1:2:4 mixed with water proofing compound.

Making Connections of proposed uPVC pipes with existing pipe in workmanship like manner

1.6 MR including testing of joints complete in respects. All uPVC fittings and solvent cement and drip Job 4 3000.00 - 12000.00

seal joints required for making connections shall be included in the rate.

2 WATER SUPPLY

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot

& cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe

2.1 18.7 with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC

solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on Wall

a) 18.7.2 20 mm nominal outer dia Pipes Metre 60 325.10 19506.00 -

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES- PLUMBING

DSR-2023/ E & Amount (Rs.)

S No Description Unit Qty. Rate (INR)

M DSR-2022/ DSR NDSR

18.7.3 25 mm nominal outer dia Pipes Metre 20 408.55 8171.00 -

c) 18.7.4 32 mm nominal outer dia Pipes Metre RO 500.95 - -

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot

& cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with

2.2 18.8 clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the same including testing of joints

complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

a) 18.8.1 15 mm nominal outer dia Pipes Metre 20 441.15 8823.00 -

b) 18.8.2 20 mm nominal outer dia Pipes Metre 105 513.75 53943.75 -

Providing, fixing, testing & commissioning of lever operated gun metal ball valve with SS ball.

a) 20mm nominal bore Each 4 990.00 - 3960.00

b) 25mm nominal bore Each 6 1225.00 - 7350.00

Providing, fixing, testing & commissioning of class-O Careflex ST insulation 6mm thick to hot

2.4 water pipe and fittings and valves as per manufacturer's recommendations complete to

MR satisfaction of Engineer in charge.

a) 15mm nominal bore (6 mm thick insulation) Metre 5 53.00 - 265.00

b) 20mm nominal bore (6 mm thick insulation) Metre 5 63.00 - 315.00

Making connections of proposed CPVC pipes with existing pipes in workmanship like manner

2.5 MR including testing of joints complete in all respects. All CPVC pipes and fittings required for making Job 3 2000.00 - 6000.00

connection shall be included in this rate.

3 SANITARY FIXTURES

Providing, fixing, testing & commissioning of white colour vitreous china Water Closet Wall-hung

toilet with Quiet-close™ seat and cover in white KOHLER Cat No. Reach™ K-72987IN-S-0 or

equivalent with Plastic outlet connector (K-1046327-S), inwall tank (KOHLER Cat. No. K-26352IN-

3.1 MR M-NA Mechanical tank 3/6L with half frame) and Droplet Flush plate (KOHLER Cat No. K-4177IN- Each 13 34436.00 - 447668.00

M-CP or equivalent) with CP bolts & nuts, solid white plastic seat and lid, CP brass hinges and

rubber buffers, and clamps all complete, including cutting and making good the walls and floors

wherever required.

Providing, fixing, testing & commissioning of white vitreous china Urinal (KOHLER Cat. No. K-

18645IN-SS-0) or (HINDWARE cat no. 60017 WATERLESS URINAL) with Urinal sensor

(KOHLER Cat. No. K-24199IN-C03-CP) including fixing to wall with suitable brackets all as per

manufacturers specification and direction of Engineer-in-charge.

Providing and fixing stainless steel A ISI : 304 (18/8) kitchen sink as per IS : 13983 with CI

3.3 17.1 brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and

making good the walls where required.

17.10.2 Kitchen sink without drain board

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES- PLUMBING

DSR-2023/ E & Amount (Rs.)

S No Description Unit Qty. Rate (INR)

M DSR-2022/ DSR NDSR

MR Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28.2 Flexible pipe

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer

3.5 17.7A of approved quality and make, including painting of fittings and brackets, cutting and making

good the walls wherever required:-

(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the

direction of Engineer-in-charge.(For wash basin & sink)

Providing and fixing CP Brass long body bib cock of approved quality confirming to IS standards

and weighing not less than 690 gms.

Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality

confirming to IS:8931

3.9 17.34 Providing and fixing toilet paper holder.

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality)

3.10 17.31 complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and Each 11 1607.95 17687.45 -

washers complete.

Providing, fixing, testing & commissioning of CP brass Sink Mixer with Swinging Spout (Table

3.11 MR Mounted Model) with 450mm Long Braided Hoses equivalent to (JAQUAR Cat. No. CON- Each 2 4630.00 - 9260.00

Providing, fixing, testing & commissioning of C.P. brass twin robe hooks equivalent to JAQUAR

Providing, fixing, testing & commissioning of Health Faucet equivalent to JAQUAR Cat. No. ALD-

573 make with flexible pipe and wall hook with each European W.C. Pan.

Providing, fixing, testing & commissioning Soap Dispenser equivalent to (JAQUAR Cat No.

Providing, fixing, testing & commissioning of 15mm C.P. brass Connection Pipe Jaquar Cat No.

ALD-805B 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers Without Nipple

3.15 MR (Suitable for WC, Geysers & Basin Mixers) or equivalent make union nuts complete with C.P. Each 65 415.00 - 26975.00

brass flange including cutting and making good the walls wherever required. (with angle valve)

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES- PLUMBING

DSR-2023/ E & Amount (Rs.)

S No Description Unit Qty. Rate (INR)

M DSR-2022/ DSR NDSR

MR Providing, fixing, testing & commissioning of S.S. Hinged Grating, 1.5mm thick with frame (Neer

Cat. No. - NRG 7006 or equivalent make CHILLY-CRG-R-127 (Square Classic)/JAYNA NEW

HEAVY GRATINGS Cat. No. NHG 140 including setting in floor with cement mortar 1:3.

Providing, fixing, testing & commissioning of automatic high pressure electric Water Heaters

HAVELLS-Monza or equivalent make VENUS-Magma-Vertical /RACOLD-Etrno-2 ER2 with glass

lining thermostats with each element and high temperature cut off, necessary insulation, safety

valve, etc. all complete.

Providing, fixing, testing and commissioning of white vitreous china Janitor Sink (Hindware Cat

No. 50001 L Sink) of 53x43x18 with CI brackets, 40mm CP brass waste with CP brass union,

complete including cutting and making good the walls wherever required.

Providing, fixing, testing & commissioning of white glazed vitreous china Division Plates for

3.19 MR urinals (H.S.I. Cat no. 61001 or approved equivalent) of size 680x 300 mm (JAQUAR Cat. No- Each 5 7500.00 - 37500.00

JSE-CHR-810UC450X).

Providing, fixing, testing & commissioning of S.STEEL HAND DRYER (EURONICS Cat No.

XJD3B) or (JAQUAR Cat. No-HDR-WHT-M14A) fixed in position by means of C.P. screws and

rawl plugs embedded in the walls complete including cutting and making good the walls

wherever required.

Providing, fixing, testing & commissioning of ABS Jumbo Roll Tissue Dispenser (EURONICS

Cat. No. EP01) or (JAQUAR Cat. No-PTD-SAP-DT0106CS) fixed in position by means of C.P.

screws and rawl plugs embedded in the walls complete including cutting and making good the

walls wherever required.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - FIRE ALARM

S NO DSR/MR DESCRIPTION OF ITEM UNIT QTY RATE DSR AMOUNT NDSR AMOUNT

SITC of UL268 10th edition compliance and FM approved Intelligent Addressable multi- criteria detector (optical and

thermal sensors) complete with standard base, facility to mount in different comprehensive environment, Tri-

color detector-status LED with 360 ° view, microprocessor circuitry with error check; detector self-

diagnostics and supervision programs,Rate-of-Rise Detection: 15°F / min. (8.3°C / min.) - Fixed: 135°F

(57°C) , Field programmable as rate-of-rise or fixed temperature, Polarity insensitive, Superior EMI and RFI

1 MR immunity, RoHS compliant. Detector shall have in-built isolator for better reliability, circuit integrity and Nos 60.00 3,724.00 223,440.00

advanced fault finding. Manufacturers not having in-built Isolator feature in detector shall consider Isolator

base in place of standard base OR separate Isolator before and after every detector to comply the

same without any extra cost. It shall be includesurface/recessed MS Box complete with all connections etc

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED,

metallic cover complete with all connections etc as required.

SITC of UL Listed and FM approved Intelligent Addressable Rate of Rise and Fixed temperature

detector complete with standard base, Seven (7) field-selectable settings in a temperature range of 135°F –

174°F (57.2°C – 78.9°C) , a low-temperature warning of 40°F (4.4°C), facility to mount in different

comprehensive environment, Tri-color detector-status LED with 360 ° view, microprocessor circuitry with error

check; detector self-diagnostics and supervision programs, Field programmable as rate-of-rise or fixed

3 MR temperature, Polarity insensitive, Superior EMI and RFI immunity, RoHS compliant. Detector shall have in- Nos 2.00 3,059.00 6,118.00

built isolator for better reliability, circuit integrity and advanced fault finding. Manufacturers not having in-built

Isolator feature in detector shall consider Isolator base in place of standard base OR separate Isolator

before and after every detector to comply the same without any extra cost.

4 MR Supplying, installation, testing & commissioning of fault isolator complete with base as required. Nos 50.00 - -

SITC of UL Listed Sounder cum Strobe rated at 75 dBA @ 3m for Audible annunciation and 75cd flashintg

at 1 Hz for visual indication.

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7), Control Module with built

in dual isolator, polarity insensitive, Tri color LED for status (Green for Normal,Yellow for Faulty and RED

for activation), Operating Temp and RH: 0-49 deg C and <=95%. Module shall have in-built isolator for

6 MR better reliability, circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator feature Nos 4.00 5,985.00 23,940.00

shall provide separate Isolator before and after every Module to comply the same without any extra cost. (For AHU

& Staircase Pressurization Fans, Hooters/ Sounders/ Strobes etc.)

Supplying, installation, testing & commissioning of addressable phone control module complete as

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7), Monitor Module with

built in dual isolator, polarity insensitive, Tri color LED for status (Green for Normal,Yellow for Faulty and

RED for activation), Operating Temp and RH: 0-49degC and <=95%. Module shall have in-built isolator for

better reliability, circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator feature

8 MR shall provide separate Isolator before and after every Module to comply the same without any extra cost. (For Flow Nos 4.00 4,522.00 18,088.00

Switch Monitoring/ Gass suppresion Integration etc.)

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - FIRE ALARM

S NO DSR/MR DESCRIPTION OF ITEM UNIT QTY RATE DSR AMOUNT NDSR AMOUNT

SITC of UL268 10th edition compliance and FM approved Intelligent Addressable Duct detector with 10ft

sampling pipe (optical and thermal sensors) complete with standard base, facility to mount in different

comprehensive environment, Tri-color detector-status LED with 360 ° view, microprocessor circuitry with error

check; detector self-diagnostics and supervision programs,Rate-of-Rise Detection: 15°F / min. (8.3°C / min.) -

Fixed: 135°F (57°C) , Field programmable as rate-of-rise or fixed temperature, Polarity insensitive, Superior EMI and

9 MR RFI immunity, RoHS compliant. Detector shall have in-built isolator for better reliability, circuit integrity and Nos 4.00 19,551.00 78,204.00

advanced fault finding. Manufacturers not having in-built Isolator feature in detector shall consider Isolator

base in place of standard base OR separate Isolator before and after every detector to comply the same without

any extra cost.

SITC of UL listed and FM approved Intelligent addressable Class X type (Style 7), Manual Pull Station

Single Action, Shock and Vibration Resistant, with built in dual isolator, polarity insensitive, Tri color LED

for status (Green for Normal,Yellow for Faulty and RED for activation), T-45 Key Reset lockset for easy

10 MR maintenance, Operating Temp and RH: 0-49degC and <=95%. MCP shall have in-built isolator for better reliability, Nos 4.00 6,384.00 25,536.00

circuit integrity and advanced fault finding. Manufacturers not having in-built Isolator feature shall provide

separate Isolator before and after every MCP to comply the same without any extra cost.

Supplying, installation, testing & commissioning of 8 zone, voice alarm controller with USB, MP3 player

(including 8 zone button paging station) with seamless integration facility with main fire alarm panel for voice

11 MR evacuation. 3. The controller shall comply standards of BS EN54-32 & EN608409, Controller shall have AC 230V Nos 1.00 279,832.00 279,832.00

and DC24V battery input. Auto switch into the battery backup when AC fails.

12 MR Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required. Nos 60.00 1,400.94 84,056.00

13 MR Supplying, installation, testing & commissioning of Digital Amplifier Single Channel complete as required. Nos 1.00 135,938.40 135,938.40

Supplying & laying of 2x1.5 sqmm fire alarm FS armoured cable, 600/1000V rated with annealed copper

conductor having XLPE insulation, steel wire armouring & FS outer sheath complete as required

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing

surface / recessed steel conduit of following pairs, cores and size including connections and

15 MR interconnections etc. as required. Mtr 600.00 207.48 124,485.00

Supplying and Laying of 2x1.5sqmm FS unarmourd cable

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like

coupler etc. as required.

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery backup complete

SITC of Remote Paging Microphone should be fully digital connected via CAT6 Cable with Controller. The

Microphone should have capability to make announcement in 96 Zones and have all call facility. The

Microphone shall have ability to control music and should be able to route the music in zones. Microphone should

have maximum zones capacity up to 120 Zones. The Microphone should have LED indication for the different

18 MR faults, the unit shall be able to indicate AC, DC, Fault, Mic and Test status through LED.. The Unit shall have 2 Nos 1.00 160,930.00 160,930.00

RJ45 ports for Microphone so that the other microphone shall be able to link with the unit. The Microphone

shall have ability to Communication limit up to 600 Meters

Supply, Installation, Testing and Commisioning of Interface Card for BMS fire integration compatible with

19 MR exisiting system Nos 1.00 186,200.00 186,200.00

Supply, Installation, Testing and Commisioning of repeater panel having 160 character display with backlit

20 MR control compatible with existing system Nos 3.00 96,645.78 289,937.34

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - FIRE ALARM

S NO DSR/MR DESCRIPTION OF ITEM UNIT QTY RATE DSR AMOUNT NDSR AMOUNT

SITC of UL864 10th Edition UL Listed and FM approved Analog Addressable 4 Loop Fire Alarm control

panel. Panel shall be running on full digital protocol with 32 bit Microprocessor . The Panel shall be complete with

6" color touch screen LCD Display. Fire alarm panel should have minimum capacity of 2500 detectors and

devices in any combination and capable of making upto 50 loops in single panel using additional Loop

cards. Each addressable loop shall be capable of taking 250 addresses per loop configuring either as all

detectors or modules or any mix of both. The panel shall have the Fire Fighter Touch Screen Graphical

Display panel to inform & guide Fire Fighters for carrying out Fire Fighting operations. The display shall

have Hazmat icons indicating the presence of any explosive gas, liquids, poison,fumes etc. If this

21 MR feature is not available in fire alarm panel then additional fire fighter touch panel along with necessary Nos 1.00 444,220.00 444,220.00

hardware and software should be provided by the manufacturers for fire fighters to guide them during

emergency without any extra cost. To expedite system troubleshooting, the system cards shall have ground

fault detection and diagnostic LEDs by card. In the display,simple building floor plan can be loaded in bitmap or

jpeg format, On the map, the user will see an icon indicating the location of the event in the building in

addition to a 'You-Are-Here' symbol to tell the responding person exactly where they are in the building in relation to

the event. The system shall be polarity insensitive. The panel shall support degrade mode operation and shall

have battery backup of 24 hrs in normal condition and 30 minutes in Alarm condition.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - FIRE FIGHTING

DSR-2022/ MR Amount (INR)

S No Description Unit Qty. Rate (INR)

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS

3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc.

and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or

1 18.7 more coats of synthetic enamel paint of required shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68

2 18.21 degree centigrade with required accessories :

a) 18.21.1 Pendent Sprinkler Each 150 522.00 78300.00

b) 18.21.2 Upright Sprinkler Each 20 522.00 10440.00

Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless

steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test

pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head

(Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar

3 18.25 of following sizes complete as required.

Providing, installation, testing & commissioning of adjustable rosette plate for 15mm dia in white

4 18.29 finish UL Listed or FM approved complete as required. Each 150 225.00 33750.00

Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required.

1 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - FIRE FIGHTING

DSR-2022/ MR Amount (INR)

S No Description Unit Qty. Rate (INR)

Providing, fixing, testing & commissioning of lever operated gun metal Ball Valve with SS ball.

a) MR 50 mm nominal bore Each 2 1940.00 3880.00

Providing and fixing in position the industrial type Pressure Gauges with gun metal / brass valves

7 16.8 complete as required Each 2 1196.00 2392.00

Making connections of proposed MS sprinkler pipes with existing MS hydrant downcomer pipe

in workmanship like manner including cutting of pipes where required and testing of joints

complete in respects. All MS pipes and fittings required for making connection shall be included in

9 FIRE EXTINGUISHERS

Providing, installation, testing and commissioning of ABC type fire extinguishers consisting of

welded MS cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge

internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle, suspension

bracket, conforming to ISI finished externally with red enamel paint and fixed to wall with brackets

9.1 complete with internal charge.

a) Capacity 6 kg. I.S.I. Marked. Each 18 3670.00 - 66060.00

CEILING MOUNTED MODULAR TYPE FIRE EXTINGUISHER

Providing and fixing of modular type Clean agent (HFC 236) type fire extinguishers consisting of

welded MS cylindrical body automatic actuated through a sprinkler head mounted on the

extinguisher body finished externally with red enamel paint and fixed to ceiling with brackets

9.2 complete with internal charge.

a) 5 Kg. Capacity Each 2 25904.00 - 51808.00

2 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - FIRE FIGHTING

DSR-2022/ MR Amount (INR)

S No Description Unit Qty. Rate (INR)

WALL MOUNTED/FLOOR MOUNTED FIRE EXTINGUISHER

Providing and fixing Clean Agent (HFC 236) type fire extinguishers consisting of welded MS

cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal

discharge tube, 30 cms long high pressure discharge hose, discharge nozzle, suspension

bracket, conforming to ISI finished externally with red enamel paint and fixed to wall with brackets

5.3 complete with internal charge.

a) 6 Kg. Capacity (Make Minimax/LifeGuard) Each 2 30221.00 - 60442.00

3 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-HVAC

DSR E&M 2022 (INR)

Description Unit Qty. DSR Amount (INR) NDSR Amount (INR)

1 Air Handling Units (Floor Mounted Type)

Supply, Installation, Testing and commissioning of factory built floor mounted chilled water double skin type horizontal /

vertical air handling units made of 50+/-2 mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8 mm

outside layer and 0.8 mm inside layer with polyurethane foam (PUF) insulation having density of 48±2 kg/m3, factory

injected between them by injection moulding machine, complete with backward curved Plug type direct driven fan with

aerofoil design blades with IP - 20 VFD suitable for static pressure as detailed below,. The fan section shall be provided

with limit switch of safety to shut off fan during opening of access door. cooling coil section with aluminium finned copper

tubes (tubes thickness not less than 0.5 mm) cooling coil of 6 row deep, filter section with 50 mm thick metal viscous /

washable synthetic type air prefilters (MERV 8 - 90% down to 10 microns) & fine filters (MERV 13 - 90% down to 3

microns) , motor of efficiency class minimum IE3 suitable for 415 ± 10% V, 50Hz, 3 Phase AC supply suitably designed for

varialbe speed applications, thermal break profile, drain connections, stainless steel (18G) drain pan with PUF insulation,

fire retardent canvas connection and necessary vibration isolation arrangement to avoid any vibration, Sound level at 3 m

distance not exceeding 75 dB, complete as per specification and of following capacities. AHU coils shall be AHRI/Eurovent

▪ Total static pressure shall be worked out by HVAC Contractor.

▪ Maximum face velocity across pre & fine filters & cooling coil shall be 155 MPM (510FPM).

▪ Maximum Fan outlet velocity shall be 610 MPM (2000 FPM).

External Static Pressure : 20 mm wg

Coil Rows Deep : 6

External Static Pressure : 20 mm wg

Coil Rows Deep : 6

2 Variable Refrigerant Volume/Flow System

Supply, Installation, Testing & Commissioning of modular type Variable Refrigerant Flow / Variable Refrigerant Volume air

cooled outdoor units suitable for cooling and heating, having all hermitecally sealed inverter type scroll compressor(s),

microprosessor based controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with

suitable foundation etc. complete as required, The unit shall deliver the rated capacity at AHRI conditions and work even at

500C ambient temperature without tripping. The unit shall be suitable to wok on 400V +/- 10%, 3 Phase, 50Hz AC power

supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI

conditions shall not be less than 3.1 and IEER not less than 6.5.

3 Indoor Unit Ductable Type

Supply, Installation, Testing & Commissioning of following minimum capacity and external static pressure VRF/VRV ceiling

mounted ductable type indoor unit equipped with washable synthetic media pre-filter, fan section with low noise

fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded

remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for operation on single

phase AC supply 230 V + 10%, 50Hz, complete as required. The unit shall have automatic force shut down provision in

case of fire on receiving signal from BMS system or fire panel of the building. The cooling capacity of indoor unit will be at

air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

4 Indoor Unit High Wall Type

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-HVAC

DSR E&M 2022 (INR)

Description Unit Qty. DSR Amount (INR) NDSR Amount (INR)

1 Air Handling Units (Floor Mounted Type)

Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit

equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multi speed

motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, drain pump, cordless remote control,

drain pan, necessary accessories etc., suitable for operation on 230V±10%, 50Hz, single phase AC supply, complete as

required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

Supply Installation, testing & commissioning of Y-joints for various size of Refrigerant pipe including insulation to the same

specifications as the connected refrigerant piping.

6 Exhaust Air (Inline) Fan Circular type

Supply, installation, testing and commissioning of inline fans of G.I. construction complete with centrifugal fan with motor,

canvass connection at inlet and outlet complete with electric panel with MCB and relays, with 5 Rm cabling and earthing

with louvers bird screen at outlet, The motor shall be suitable for 240±10% volt single phase 50 cycles AC supply complete

as per specifications and following capacities.

6.1 MR Air Quantity : 200 CFM Nos. 2 12362.00 24724.00

Static Pressure : 10 mm wg

7 Copper Refrigerant Piping

Supply, Installation, Testing & Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of

soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type

hanger supports, jointing/brazing including accessories, insulated with Class-O closed cell elastometric nitrile rubber

tabular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per

specifications etc. as required:

7.1 DSR 5.2 - 2019 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 30 331.00 9930.00

7.2 DSR 5.4 - 2019 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 30 588.00 17640.00

7.3 DSR 5.5 - 2019 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 245 707.00 173215.00

7.4 DSR 5.6 - 2019 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation Metre 245 865.00 211925.00

8 INSULATED CHILLED WATER PIPING (Nitrile Rubber Insulation)

Supplying, laying / fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building

(with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with

following closed cell elastomeric nitrile rubber of minimum 45 kg/m3 density, thermal conductivity 0.037 W/MK or better at

20 deg mean temperature class 'O' insualtion applied by suitable adhesive complete including repairing of damage to

building etc. as per specifications and as required complete in all respect.

Note : The pipes size 150 mm and below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150 mm shall be

welded black steel pipe heavy class as per IS : 3589 from minimum 6.35 mm thick M.S. sheet for pipes upto 350 mm dia

and for minimum 7 mm thick M.S. sheet for pipes for 400 mm dia and above.

8.1 DSR 16.2.10 65 mm dia (32 mm thick insulation) Metre 20 1794.00 35880.00

8.2 DSR 16.2.11 50 mm dia (32 mm thick insulation) Metre 20 1553.00 31060.00

9 Insulated Valves

Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly

insulated to the same specifications as the connected piping and adequately supported as per specifications.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-HVAC

DSR E&M 2022 (INR)

Description Unit Qty. DSR Amount (INR) NDSR Amount (INR)

1 Air Handling Units (Floor Mounted Type)

Butterfly Valve (Manual) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water

circulation as specified.

Balancing Valve with Built in Measuring Facility with C I body flanged construction with EPDM coated disc with

9.2 longpitch with protected out pipe insulation & PN 16 pressure rating for chilled water circulation as specified.

Y - Strainer of Ductile CI Body flanged ends with stainless steel strainer for chilled water circulation includinginsulation as

10 PICB Valve with PID Control Logic

Supply, installaiton, testing and commissioning of following sizes electronic, self-balancing, pressure independent type

dynamic balancing valve with integrated 2 way modulating control valve in a single body. The actuator shall be capable of

accepting upto 10V DC and upto 20 mA electric signal and shall provide similar transduced feedback output to control

system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and 7 Bar for 65 mm & above.

Valves should have pressure rating of 25 Bar minimum.

11 Drain Piping

Supply, installation and testing of UPVC drain piping, working pressure 10 kg/cm2, complete with fittings, U-trap, supports

valves and insulated with 9 mm thick Nitrile rubber insulation complete as per standards, requirements and drawings.

Supplying,fixing,testing and commissioning of Bypass type VAV Boxes for climate control, made out of 20 gauge thick

galvanised steel sheet acoustically lined from inside; low leak multi blade extruded aluminium motorized face & bypass

volume control damper with thumb-wheel adjustable thermostat. Dynamic factory calibrated and adjustable flow of below

mentioned capacity complete in all respect.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-HVAC

DSR E&M 2022 (INR)

Description Unit Qty. DSR Amount (INR) NDSR Amount (INR)

1 Air Handling Units (Floor Mounted Type)

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular ducting complete with

neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and

specifications of following sheet thickness complete as required.

13.1 G.I. Sheet Metal Ducting (Rectangular)

13.2 DSR 16.12.1.1 Thickness 0.63 mm sheet (750 mm & below) Sqm 505 1080.00 545400.00

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (class "O")

insulation on existing duct after applying suitable adhesive for nitrile rubber . The joints shall sealed with50 mm wide and 3

mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required.

15 Duct Acoustic Lining

Supply and fixing of accoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density

of 32 kg/m3, with 25 mm x 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced

Plastic tissue paper and 0.5 mm thick perforated aluminium sheet fixed to inside surface of ducts with cadmium plated

nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.

15.1 DSR 16.21 25 mm thick, 32 kg/m3 density Sqm 115 708.00 81420.00

16 Grilles/ Diffusers

Supply, installation, testing and commissioning of Aluminium extruted powder coated supply and return air grilles/

16.1 diffusers as per specifications and drawings (Approval of colour shall be taken from Architects/ Consultants).

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per

specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers

complete as required.

Supply and fixing of Fresh / Exhaust air Aluminium extruded with bird screen, damper adjustable louvers as per

specifications and drawings.

18 Volume Control Damper

Supply, installation,testing & commissioning of GI volume control duct damper complete with neoprene rubber gaskets,

nuts, bolts, screws linkages, flanges etc, as per specifications.

19 Acoustic Lining for AHU Room

Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50mm thick, density 32 kg/cu.m resin bonded glass

fiber insulation friction fixed in 610mm x 610 mm frame work made of 25 X 50 X50 X 50 X 25 mm made out of 0.6mm thick

19.1 DSR 16.22 GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium Sqm 255 1229.00 313395.00

sheet etc.complete as required and as per specifications.

20 Control & Transmission Wiring

20.1 Supplying & fixing copper 2c-1.5 sqmm control cum transmission wiring of copper in heavy duty conduits PVC conduits

between indoor and out door unit.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-HVAC

DSR E&M 2022 (INR)

Description Unit Qty. DSR Amount (INR) NDSR Amount (INR)

1 Air Handling Units (Floor Mounted Type)

21 Sequence Controller

Supplying and fixing microprocessor based control panel cum seqence operation controller for wall mounted unit in Server

/ UPS Room including wiring etc. The controller shall perform mainly the following function.

To run only required set of unit.

To set timer for operation of each unit.

21.1 MR To start standby unit incase of breakdown fault or on temerature rise of space. Nos. 2 41085.00 82170.00

22 Electric Panel Board

Starter Panel For AHU

Supply, installation, testing & commissioning of sub panel board cubical compartmentalised, floor mounted made of 2.0

mm thick steel sheet duly painted complete with voltmeter, ammeter, indicating lights for selector switch,

incoming/outgoing feeders NO/NC contactors, potentional free 24V contact (for fire alarm integration) complete as per

specifications and required. (Panel should be BMS and fire alarm compitable )

22.1 MR 1 No. 25 Amps MPCB outgoing along with 1 Nos. star delta starter for AHU motor. (7.5 kw) Set 1 104633.00 104633.00

22.2 MR 1 No. 25 Amps MPCB outgoing along with 1 Nos. DOL starter for AHU motor. (5.5 kw) Set 1 90682.00 90682.00

Supplying & installation of weather proof isolator with suitable rating near each unit the prices should be inclusive of suitable

size of copper cabling from isolators to units and complete as required.

23.1 MR 25 Amps for 6 HP Outdoor Unit Nos. 3 44643.00 133929.00

24 Power Cabling

Supplying, laying, testing of 1.1 KV grade multicore aluminium conductor XLPE insulated & PVC sheathed armoured power

cable as per IS : 7098 (Part-1) 1988 including termination, cable joint & joints with solder lugs, crimping lugs, single

compression brass glands etc. complete as required.

Supplying and installation of following size of perforated painted with powder coating GI. cable trays with perforation not

more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with GI. suspenders including

bolts & nuts, painting suspenders, including supports etc. as required.

25.1 DSR 4.6.2 150 mm width x 50 mm depth x 1.6 mm thickness Meter 100 716.00 71600.00

Total Amount 2826699.50 2393626.80

Total Amount 2826699.50 2393626.80

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Specification Ref. Image QTY Rate DSR Amount NDSR Amount

Supplying and installation of Linear shaped back to back workstations with Table size W1500m X W1350mm x D600mm x H 730mm

The worktop to be 25mm E1 grade low pressure prelamianted particle board with the ABS edge banding of 2mm thickness.

The Laminate is Low pressure laminate also know as melamine in E1 grade LPL board. The LPL is complied with IS 12823:1990 (Wood products - prelaminated

particle boards specification). It covers major LPL performance such as scratch resistance, wear resistance, stain resistance with inclusion of Formaldehyde test

meeting E1 standards. All the open edges of work surface shall be provided with machine pressed 2 mm thick ABS lipping.

Understructure - Steel A leg 30x50mm with leveling composes of leg, base, glide, accent plate and end bracket. Steel A leg with leveling applies epoxy finished.

Leg composes of vertical tubes and cross tube beam. Vertical tube made of roll forming with average thickness 2mm, and cross beam made of steel tube with

thickness 3mm. Base made of plastic injection with Nylon, 30% fiber glass, and in middle of base applies with M8 metal inserter. Glide made of plastic injection

with Nylon 30% fiber glass. Accent plate made of 1.6mm SPCC steel with epoxy finished. End bracket made of 5mm SPCC steel with epoxy finished. Base, glide,

accent plate and end bracket deliver together with Steel A leg.

Intermediate leg for double sided with leveling composes of leg, cable cover, and glide. Leg manufactures based on welding with 2mm thickness Q235 steel tube

with epoxy finishes. Cable tray for double sided composes of hung bracket, cable tray and faceplate.

Cable tray made of 0.7-0.8mm SPCC with epoxy finished and faceplate made of 1.2mm SPCC with epoxy finished. To be provided with metal powder coated

1 Workstations L shaped fliptop boxes of size 400-600mm. 14 160091.00 2241274.00

The workstation shall have 1 nos Desk-Height Nook Open Dual Sided Left or Right Handed of length 1200-1400mm on one side . Includes two steel shrouds and

two shelves. Nooks 48″(1219mm) and greater have a center divider in cubby. Divider finish matches shelf. Shroud is solid or with accessory slot. Accessory slots

start two inches from the top of the shroud. Nominal width 120/140 cm, Depth 30 cm, Height 36 cm. Includes one painted stanchion of height 110mm and

attachment hardware.It should Support desk-height storage nook or desk-height shelf in parallel or perpendicular applications.

On the ther side the workstation shall have trimless tackable screen with sandwiched pet panel in between of total thickness 20mmm, of height 420mm above

table top and length 1100-1200mm.

Warranty - 10 years

Product to be Greenguard and ANSI/BIFMA certified.

Supplying and installation of Linear shaped back to back workstations with Table size W1500m x D600mm x H 730mm

The worktop to be 25mm E1 grade low pressure prelamianted particle board with the ABS edge banding of 2mm thickness.

The Laminate is Low pressure laminate also know as melamine in E1 grade LPL board. The LPL is complied with IS 12823:1990 (Wood products - prelaminated

particle boards specification). It covers major LPL performance such as scratch resistance, wear resistance, stain resistance with inclusion of Formaldehyde test

meeting E1 standards. All the open edges of work surface shall be provided with machine pressed 2 mm thick ABS lipping.

Understructure - Steel A leg 30x50mm with leveling composes of leg, base, glide, accent plate and end bracket. Steel A leg with leveling applies epoxy finished.

Leg composes of vertical tubes and cross tube beam. Vertical tube made of roll forming with average thickness 2mm, and cross beam made of steel tube with

thickness 3mm. Base made of plastic injection with Nylon, 30% fiber glass, and in middle of base applies with M8 metal inserter. Glide made of plastic injection

with Nylon 30% fiber glass. Accent plate made of 1.6mm SPCC steel with epoxy finished. End bracket made of 5mm SPCC steel with epoxy finished. Base, glide,

accent plate and end bracket deliver together with Steel A leg.

Intermediate leg for double sided with leveling composes of leg, cable cover, and glide. Leg manufactures based on welding with 2mm thickness Q235 steel tube

with epoxy finishes. Cable tray for double sided composes of hung bracket, cable tray and faceplate.

Cable tray made of 0.7-0.8mm SPCC with epoxy finished and faceplate made of 1.2mm SPCC with epoxy finished. To be provided with metal powder coated

fliptop boxes of size 400-600mm.

The workstation shall have 1 nos Desk-Height Nook Open Dual Sided Left or Right Handed of length 1200-1400mm. Includes two steel shrouds and two shelves.

2 Workstations Linear 22 124691.00 2743202.00

Nooks 48″(1219mm) and greater have a center divider in cubby. Divider finish matches shelf. Shroud is solid or with accessory slot. Accessory slots start two

inches from the top of the shroud. Nominal width 120/140 cm, Depth 30 cm, Height 36 cm. Includes one painted stanchion of height 110mm and attachment

hardware.It should Support desk-height storage nook or desk-height shelf in parallel or perpendicular applications.

Warranty - 10 years

Product to be Greenguard and ANSI/BIFMA certified.

Supplying of cabin desk unit of size L2000mm x D900mm x H730mm

The Main table top are made of combination of 25-30 mm LPL prelaminated board. The side panels are made of combination of 18 mm LPL prelaminated board.

The modesty panel 400mm high is 18mm thick made of same material as of main table top and side panel. All edges are edge banded with matching PVC / ABS

lipping. Mobile pedestal (3 drawer unit) shall also be made up of 18m thick prelam board with top wood laminate. All the dimensions will be as per the Original

Manufacturer's Specifications. Table to be supplied with cable riser, cable tray and wire management. Cable tray made of 0.8mm SPCC with epoxy finished and

faceplate made of 1.2mm SPCC with epoxy finished. The Laminate is Low pressure laminate also know as melamine in E1 grade LPL board. The LPL is complied

with IS 12823:1990 (Wood products - prelaminated particle boards specification). It covers major LPL performance such as scratch resistance, wear resistance,

3 Desk Marketing / BD / Finance Desk stain resistance with inclusion of Formaldehyde test meeting E1 standards. To be provided with aluminium/plastic fliptop boxes of size 400-600mm. 3 143442.00 430326.00

The product should be complete as per approved sample and as per the direction of Engineer-In-charge.

Supplying of cabin desk unit of size L1500mm x D900mm x H730mm

The Main table top are made of combination of 25-30 mm LPL prelaminated board. The side panels are made of combination of 18 mm LPL prelaminated board.

The modesty panel 400mm high is 18mm thick made of same material as of main table top and side panel. All edges are edge banded with matching PVC / ABS

lipping. Mobile pedestal (3 drawer unit) shall also be made up of 18m thick prelam board with top wood laminate. All the dimensions will be as per the Original

Manufacturer's Specifications. Table to be supplied with cable riser, cable tray and wire management. Cable tray made of 0.8mm SPCC with epoxy finished and

faceplate made of 1.2mm SPCC with epoxy finished. The Laminate is Low pressure laminate also know as melamine in E1 grade LPL board. The LPL is complied

with IS 12823:1990 (Wood products - prelaminated particle boards specification). It covers major LPL performance such as scratch resistance, wear resistance,

4 Tech Head Desk stain resistance with inclusion of Formaldehyde test meeting E1 standards. To be provided with aluminium/plastic fliptop boxes of size 400-600mm. 1 131642.00 131642.00

The product should be complete as per approved sample and as per the direction of Engineer-In-charge.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Specification Ref. Image QTY Rate DSR Amount NDSR Amount

Supplying and installation of Linear shaped non sharing workstations with Table size W2700m x D600mm x H 730mm

The worktop to be 25mm E1 grade low pressure prelamianted particle board with the ABS edge banding of 2mm thickness.

The Laminate is Low pressure laminate also know as melamine in E1 grade LPL board. The LPL is complied with IS 12823:1990 (Wood products - prelaminated

particle boards specification). It covers major LPL performance such as scratch resistance, wear resistance, stain resistance with inclusion of Formaldehyde test

meeting E1 standards. All the open edges of work surface shall be provided with machine pressed 2 mm thick ABS lipping.

Understructure - Steel A leg 30x50mm with leveling composes of leg, base, glide, accent plate and end bracket. Steel A leg with leveling applies epoxy finished.

Leg composes of vertical tubes and cross tube beam. Vertical tube made of roll forming with average thickness 2mm, and cross beam made of steel tube with

thickness 3mm. Base made of plastic injection with Nylon, 30% fiber glass, and in middle of base applies with M8 metal inserter. Glide made of plastic injection

with Nylon 30% fiber glass. Accent plate made of 1.6mm SPCC steel with epoxy finished. End bracket made of 5mm SPCC steel with epoxy finished. Base, glide,

accent plate and end bracket deliver together with Steel A leg.

Intermediate leg for double sided with leveling composes of leg, cable cover, and glide. Leg manufactures based on welding with 2mm thickness Q235 steel tube

with epoxy finishes. Cable tray for double sided composes of hung bracket, cable tray and faceplate.

Cable tray made of 0.7-0.8mm SPCC with epoxy finished and faceplate made of 1.2mm SPCC with epoxy finished. To be provided with metal powder coated

fliptop boxes of size 400-600mm.

The workstation shall have 2 nos trimless tackable fabric screen with sandwiched pet panel of total thickness 20mm, height 420mm & length 1350mm.

Warranty - 10 years

Product to be Greenguard and ANSI/BIFMA certified.

Supplying and installation of Linear shaped workstations with Table size W1050m x D600mm x H 730mm

The worktop to be 25mm E1 grade low pressure prelamianted particle board with the ABS edge banding of 2mm thickness.

The Laminate is Low pressure laminate also know as melamine in E1 grade LPL board. The LPL is complied with IS 12823:1990 (Wood products - prelaminated

particle boards specification). It covers major LPL performance such as scratch resistance, wear resistance, stain resistance with inclusion of Formaldehyde test

meeting E1 standards. All the open edges of work surface shall be provided with machine pressed 2 mm thick ABS lipping.

Understructure - Steel A leg 30x50mm with leveling composes of leg, base, glide, accent plate and end bracket. Steel A leg with leveling applies epoxy finished.

Leg composes of vertical tubes and cross tube beam. Vertical tube made of roll forming with average thickness 2mm, and cross beam made of steel tube with

thickness 3mm. Base made of plastic injection with Nylon, 30% fiber glass, and in middle of base applies with M8 metal inserter. Glide made of plastic injection

with Nylon 30% fiber glass. Accent plate made of 1.6mm SPCC steel with epoxy finished. End bracket made of 5mm SPCC steel with epoxy finished. Base, glide,

accent plate and end bracket deliver together with Steel A leg.

Intermediate leg for double sided with leveling composes of leg, cable cover, and glide. Leg manufactures based on welding with 2mm thickness Q235 steel tube

with epoxy finishes. Cable tray for double sided composes of hung bracket, cable tray and faceplate.

Cable tray made of 0.7-0.8mm SPCC with epoxy finished and faceplate made of 1.2mm SPCC with epoxy finished. To be provided with metal powder coated

6 Marketing & BD Calling Desk 16 82199.00 1315184.00

fliptop boxes of size 400-600mm.

The workstation shall have 1 nos trimless tackable fabric screen with sandwiched pet panel of total thickness 20mm, height 420mm & length 900mm.

Warranty - 10 years

Product to be Greenguard and ANSI/BIFMA certified.

Supplying and installation of Linear shaped non sharing workstations with Table size W1200m x D600mm x H 730mm

The worktop to be 25mm E1 grade low pressure prelamianted particle board with the ABS edge banding of 2mm thickness.

The Laminate is Low pressure laminate also know as melamine in E1 grade LPL board. The LPL is complied with IS 12823:1990 (Wood products - prelaminated

particle boards specification). It covers major LPL performance such as scratch resistance, wear resistance, stain resistance with inclusion of Formaldehyde test

meeting E1 standards. All the open edges of work surface shall be provided with machine pressed 2 mm thick ABS lipping.

Understructure - Steel A leg 30x50mm with leveling composes of leg, base, glide, accent plate and end bracket. Steel A leg with leveling applies epoxy finished.

Leg composes of vertical tubes and cross tube beam. Vertical tube made of roll forming with average thickness 2mm, and cross beam made of steel tube with

thickness 3mm. Base made of plastic injection with Nylon, 30% fiber glass, and in middle of base applies with M8 metal inserter. Glide made of plastic injection

with Nylon 30% fiber glass. Accent plate made of 1.6mm SPCC steel with epoxy finished. End bracket made of 5mm SPCC steel with epoxy finished. Base, glide,

accent plate and end bracket deliver together with Steel A leg.

Intermediate leg for double sided with leveling composes of leg, cable cover, and glide. Leg manufactures based on welding with 2mm thickness Q235 steel tube

with epoxy finishes. Cable tray for double sided composes of hung bracket, cable tray and faceplate.

Cable tray made of 0.7-0.8mm SPCC with epoxy finished and faceplate made of 1.2mm SPCC with epoxy finished. To be provided with metal powder coated

7 Finance & Tech Calling Desk 8 84559.00 676472.00

fliptop boxes of size 400-600mm.

The workstation shall have 1 nos trimless tackable fabric screen with sandwiched pet panel of total thickness 20mm, height 420mm & length 1000mm.

Warranty - 10 years

Product to be Greenguard and ANSI/BIFMA certified.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Specification Ref. Image QTY Rate DSR Amount NDSR Amount

Supplying and installation of Linear shaped non sharing workstations with Table size W1750m x D600mm x H 730mm

The worktop to be 25mm E1 grade low pressure prelamianted particle board with the ABS edge banding of 2mm thickness.

The Laminate is Low pressure laminate also know as melamine in E1 grade LPL board. The LPL is complied with IS 12823:1990 (Wood products - prelaminated

particle boards specification). It covers major LPL performance such as scratch resistance, wear resistance, stain resistance with inclusion of Formaldehyde test

meeting E1 standards. All the open edges of work surface shall be provided with machine pressed 2 mm thick ABS lipping.

Understructure - Steel A leg 30x50mm with leveling composes of leg, base, glide, accent plate and end bracket. Steel A leg with leveling applies epoxy finished.

Leg composes of vertical tubes and cross tube beam. Vertical tube made of roll forming with average thickness 2mm, and cross beam made of steel tube with

thickness 3mm. Base made of plastic injection with Nylon, 30% fiber glass, and in middle of base applies with M8 metal inserter. Glide made of plastic injection

with Nylon 30% fiber glass. Accent plate made of 1.6mm SPCC steel with epoxy finished. End bracket made of 5mm SPCC steel with epoxy finished. Base, glide,

accent plate and end bracket deliver together with Steel A leg.

Intermediate leg for double sided with leveling composes of leg, cable cover, and glide. Leg manufactures based on welding with 2mm thickness Q235 steel tube

with epoxy finishes. Cable tray for double sided composes of hung bracket, cable tray and faceplate.

Cable tray made of 0.7-0.8mm SPCC with epoxy finished and faceplate made of 1.2mm SPCC with epoxy finished. To be provided with metal powder coated

8 Secretary Desk 2 86919.00 173838.00

fliptop boxes of size 400-600mm.

The workstation shall have 1 nos trimless tackable fabric screen with sandwiched pet panel of total thickness 20mm, height 420mm & length 1000mm.

Warranty - 10 years

Product to be Greenguard and ANSI/BIFMA certified.

Supplying and installation of Linear shaped non sharing workstations with Table size W1200m x D600mm x H 730mm

The worktop to be 25mm E1 grade low pressure prelamianted particle board with the ABS edge banding of 2mm thickness.

The Laminate is Low pressure laminate also know as melamine in E1 grade LPL board. The LPL is complied with IS 12823:1990 (Wood products - prelaminated

particle boards specification). It covers major LPL performance such as scratch resistance, wear resistance, stain resistance with inclusion of Formaldehyde test

meeting E1 standards. All the open edges of work surface shall be provided with machine pressed 2 mm thick ABS lipping.

Understructure - Steel A leg 30x50mm with leveling composes of leg, base, glide, accent plate and end bracket. Steel A leg with leveling applies epoxy finished.

Leg composes of vertical tubes and cross tube beam. Vertical tube made of roll forming with average thickness 2mm, and cross beam made of steel tube with

thickness 3mm. Base made of plastic injection with Nylon, 30% fiber glass, and in middle of base applies with M8 metal inserter. Glide made of plastic injection

with Nylon 30% fiber glass. Accent plate made of 1.6mm SPCC steel with epoxy finished. End bracket made of 5mm SPCC steel with epoxy finished. Base, glide,

accent plate and end bracket deliver together with Steel A leg.

Intermediate leg for double sided with leveling composes of leg, cable cover, and glide. Leg manufactures based on welding with 2mm thickness Q235 steel tube

with epoxy finishes. Cable tray for double sided composes of hung bracket, cable tray and faceplate.

Cable tray made of 0.7-0.8mm SPCC with epoxy finished and faceplate made of 1.2mm SPCC with epoxy finished. To be provided with metal powder coated

9 Desk outside tech calling 1 160079.00 160079.00

fliptop boxes of size 400-600mm. Front metal powder coated modesty of height 400mm.

The Back unit of size L1700xD450xH730mm shall be made of 18mm thick prelam board particle board. Storage Unit shall be provided with shutters made out of

18mm thick prelaminated particle board and back in 9mm thick prelaminated particle board.

The top, door and shelf are with 2mm PVC egde Imported banding & other panels are with 0.8mm thick PVC Imported edge banding. The units are assembled by

knock down fittings such as Minifix & Dowels. Indluding all the hardware and Hinges.

The Laminate is Low pressure laminate also know as melamine in E1 grade LPL board. The LPL is complied with IS 12823:1990 (Wood products - prelaminated

particle boards specification). It covers major LPL performance such as scratch resistance, wear resistance, stain resistance with inclusion of Formaldehyde test

meeting E1 standards. All the dimensions will be as per the Original Manufacturer's Specifications.

Warranty - 10 years

Product to be Greenguard and ANSI/BIFMA certified.

Supplying and installation of Linear shaped workstations with Table size W1050m x D600mm x H 730mm

The worktop to be 25mm E1 grade low pressure prelamianted particle board with the ABS edge banding of 2mm thickness.

The Laminate is Low pressure laminate also know as melamine in E1 grade LPL board. The LPL is complied with IS 12823:1990 (Wood products - prelaminated

particle boards specification). It covers major LPL performance such as scratch resistance, wear resistance, stain resistance with inclusion of Formaldehyde test

meeting E1 standards. All the open edges of work surface shall be provided with machine pressed 2 mm thick ABS lipping.

Understructure - Steel A leg 30x50mm with leveling composes of leg, base, glide, accent plate and end bracket. Steel A leg with leveling applies epoxy finished.

Leg composes of vertical tubes and cross tube beam. Vertical tube made of roll forming with average thickness 2mm, and cross beam made of steel tube with

thickness 3mm. Base made of plastic injection with Nylon, 30% fiber glass, and in middle of base applies with M8 metal inserter. Glide made of plastic injection

with Nylon 30% fiber glass. Accent plate made of 1.6mm SPCC steel with epoxy finished. End bracket made of 5mm SPCC steel with epoxy finished. Base, glide,

accent plate and end bracket deliver together with Steel A leg.

Intermediate leg for double sided with leveling composes of leg, cable cover, and glide. Leg manufactures based on welding with 2mm thickness Q235 steel tube

with epoxy finishes. Cable tray for double sided composes of hung bracket, cable tray and faceplate.

Cable tray made of 0.7-0.8mm SPCC with epoxy finished and faceplate made of 1.2mm SPCC with epoxy finished. To be provided with metal powder coated

fliptop boxes of size 400-600mm.

The workstation shall have 1 nos trimless tackable fabric screen with sandwiched pet panel of total thickness 20mm, height 420mm & length 900mm.

Warranty - 10 years

Product to be Greenguard and ANSI/BIFMA certified.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Specification Ref. Image QTY Rate DSR Amount NDSR Amount

Providing and placing of conference table of size : Dia1200mm x H730mm,

The Main table top is made of combination of Made from Veneer MDF panels total thickness: 30-40 mm, density 740kg/m`, covered in real wood veneer 0.4- 0.5 mmwith an engineered composite panel

with a minimum 90% wood fiber content, at least 10% post consumer, and 80% pre-consumer wood fiber-bondedwith resin. Worksurfaces, including Desks ,Common Modular Tops and Modular

Credenza Worksurfaces are (30-40mm) thick and are made of woodcomposite core. Veneer worksurfaces are balanced construction with wood veneer on the top, a balancing backer on the bottom, and

are available with the following wood beweled edges.

With Understructure made out of Steel A leg 30x50mm with round edges composed of leg, base, glide, accent plate and end bracket. Steel A legwith leveling should be epoxy finished. Accent plate made

of 1.6mm SPCC steel with epoxy finished. Cable tray to be provided with 2 various finishes: epoxy / black oxide composed of hung tray and faceplate.Cable tray made of 0.8mm SPCC with epoxy finished

and faceplate made of 1.2mm SPCC with epoxy finished. Cable Riser to be provided for meeting table along with soft close fliptop.

Warranty - 10 years

Product to be Greenguard Gold and ANSI/BIFMA certified.

Providing and placing of conference table of size : Dia1200mm x H730mm,

The Main table top is made of combination of Made from Veneer MDF panels total thickness: 30-40 mm, density 740kg/m`, covered in real wood veneer 0.4- 0.5

mm with an engineered composite panel with a minimum 90% wood fiber content, at least 10% post consumer, and 80% pre-consumer wood fiber-bondedwith

resin. Worksurfaces, including Desks ,Common Modular Tops and Modular Credenza Worksurfaces are (30-40mm) thick and are made of woodcomposite

core. Veneer worksurfaces are balanced construction with wood veneer on the top, a balancing backer on the bottom, and are available with the following wood

With Understructure made out of Steel A leg 30x50mm with round edges composed of leg, base, glide, accent plate and end bracket. Steel A legwith leveling

12 CEO Round Table should be epoxy finished. Accent plate made of 1.6mm SPCC steel with epoxy finished. Cable tray to be provided with 2 various finishes: epoxy / black oxide 1 282267.00 282267.00

composed of hung tray and faceplate.Cable tray made of 0.8mm SPCC with epoxy finished and faceplate made of 1.2mm SPCC with epoxy finished. Cable Riser

to be provided for meeting table along with soft close fliptop.

Warranty - 10 years

Product to be Greenguard Gold and ANSI/BIFMA certified.

Providing and placing in credenza of size 1600x450x750 mmmade of combination of Made from Veneer MDF panels total thickness: 30-40 mm top and structure

made out of 18mm veneer panels, density 740kg/m`, covered in real wood veneer 0.4- 0.5 mmwith an engineered composite panel with a minimum 90% wood fiber

content, at least 10% post consumer, and 80% pre-consumer wood fiber-bondedwith resin. .Worksurfaces, including Desks ,Common Modular Tops and

Modular Credenza Worksurfaces are (50mm) thick and are made of woodcomposite core.

Veneer worksurfaces are balanced construction with wood veneer on the top, a balancing backer on the bottom

and are available with the following wood edges:

• 0.98” (3.0mm) thick Square Wood Edge

• 1” (25.4mm) thick Bevel profiled wood edge

13 CEO Console • 1” (25.4mm) thick Radius profiled wood edge 2 283731.00 567462.00

• 1” (25.4mm) thick Traditional profiled wood edge

The connecting edges of Return Tops, Bridges and Attached Convergent Tops receive a counter profile when the Bevel, Radius and Traditional profiled wood

edges are specified. All additional edges are 0.04” (1mm) wood edgeband. Storage Unit shall be provided with shutters/drawers made out of 18-25mm thick

Veneer MDF panels total thickness, density 740kg/m`, covered in real wood veneer 0.4- 0.5 mm with an engineered composite panel with matching lipping and

finger groove concealed handles. All the dimensions will be as per the Original Manufacturer's Specifications. The product should be complete as per approved

sample and as per the direction of Engineer-In-charge. Warranty 5 Years

Providing and placing of conference table of size : L1650XD900mm x H730mm,

With Main Top made of minimum 25mm thick Prelaminated particle Board, Particle Board. The Laminate is Low pressure laminate also know as melamine in E1

grade LPL board. The LPL is complied with IS 12823:1990 (Wood products - prelaminated particle boards specification). It covers major LPL performance such

as scratch resistance, wear resistance, stain resistance with inclusion of Formaldehyde test meeting E1 standards. All the open edges of work surface shall be

provided with machine pressed 2 mm thick PVC / ABS lipping. Understructure made out of Steel A leg 30x50mm with round edges composed of leg, base, glide,

accent plate and end bracket. Steel A legwith leveling should be epoxy finished. Accent plate made of 1.6mm SPCC steel with epoxy finished. Cable tray to be

provided with 2 various finishes: epoxy / black oxide composed of hung tray and faceplate.Cable tray made of 0.8mm SPCC with epoxy finished and faceplate

14 4 Pax Meeting table made of 1.2mm SPCC with epoxy finished. Cable Riser to be provided for meeting table along with soft close fliptop. 1 132573.00 132573.00

Warranty - 10 years

Product to be Greenguard Gold and ANSI/BIFMA certified.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Specification Ref. Image QTY Rate DSR Amount NDSR Amount

Providing and placing of conference table of size : L2000XD900mm x H730mm,

With Main Top made of minimum 25mm thick Prelaminated particle Board, Particle Board. The Laminate is Low pressure laminate also know as melamine in E1

grade LPL board. The LPL is complied with IS 12823:1990 (Wood products - prelaminated particle boards specification). It covers major LPL performance such

as scratch resistance, wear resistance, stain resistance with inclusion of Formaldehyde test meeting E1 standards. All the open edges of work surface shall be

provided with machine pressed 2 mm thick PVC / ABS lipping. Understructure made out of combination of 18-25 mm LPL board and composite panel with top in

wooden LPL. The modesty panel 730mm high is 18mm thick made of same material as of main table top and side panel..Cable tray made of 0.8mm SPCC with

epoxy finished and faceplate made of 1.2mm SPCC with epoxy finished. Cable Riser to be provided for meeting table along with soft close fliptop.

Warranty - 10 years

15 6 Pax Meeting table 2 490231.00 980462.00

Providing and placing of conference table of size : L5600XD1500mm x H730mm,

With Main Top made of minimum 25mm thick Prelaminated particle Board, Particle Board. The Laminate is Low pressure laminate also know as melamine in E1

grade LPL board. The LPL is complied with IS 12823:1990 (Wood products - prelaminated particle boards specification). It covers major LPL performance such

as scratch resistance, wear resistance, stain resistance with inclusion of Formaldehyde test meeting E1 standards. All the open edges of work surface shall be

provided with machine pressed 2 mm thick PVC / ABS lipping. Understructure made out of combination of 18-25 mm LPL board and composite panel with top in

wooden LPL. The modesty panel 730mm high is 18mm thick made of same material as of main table top and side panel..Cable tray made of 0.8mm SPCC with

epoxy finished and faceplate made of 1.2mm SPCC with epoxy finished. Cable Riser to be provided for meeting table along with soft close fliptop.

Warranty - 10 years

Supplying and placing of Freestanding Sonsole of size L2100xD450xH550mm with openable swing door shutters.

Storage Unit shall be provided with shutters made out of 18mm thick prelaminated particle board and back in 9mm thick prelaminated particle board.

The top, door and shelf are with 2mm PVC egde Imported banding & other panels are with 0.8mm thick PVC Imported edge banding. The units are assembled by

knock down fittings such as Minifix & Dowels. Indluding all the hardware and Hinges.

The Laminate is Low pressure laminate also know as melamine in E1 grade LPL board. The LPL is complied with IS 12823:1990 (Wood products - prelaminated

particle boards specification). It covers major LPL performance such as scratch resistance, wear resistance, stain resistance with inclusion of Formaldehyde test

meeting E1 standards.

Conference room / Warranty - 10 years

Board room console

Supplying of cafe table 1200*750*730mm

Top made of minimum 25mm thick Prelaminated particle Board, Particle Board. The Laminate is Low pressure laminate . The Low pressure Laminate should be

scratch resistance, wear resistance, stain resistance with inclusion of Formaldehyde test meeting E1 standards.

All the open edges of work surface shall be provided with machine pressed 2 mm thick PVC / ABS lipping.

Understructure made out of powder coated understructure.

18 Café Table WARRANTY: 10 years against any manufacturing defects. 8 52581.00 420648.00

Supplying of cafe chair in steel rod frame powder coated. With two pice piece high-strength polymer shell seat and polymer shell back.

High impact clear nylon glides with chair should Stacks 10-high on the floor.

Total high: 777.9 mm

Seat high: 445 mm

Seat depth: 440 mm

Back widith: 450 mm

Warranty 2 years.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Specification Ref. Image QTY Rate DSR Amount NDSR Amount

Supplying of chair in fabric / leatherette upholstery

Steel / Wooden structure PU moulded frame duly fabric upholstered.

Base is 5 star electrostatic metal polished as per architects choice.

Fabric to be used medley or equivalent.

DIMENSIONS: W700mm x D680mm x H820mm

Warranty 2 years

The Product should be Indoor Advantage™ Gold certified & complete as per the approved sample and as per the direction of engineer incharge.

20 CEO visitor chair 4 132939.00 531756.00

Supplying of chair in fabric upholstery

Steel / Wooden structure PU moulded frame duly fabric upholstered.

Base is 5 star nylon base as per architects choice.

Fabric to be used medley or equivalent.

DIMENSIONS: W640mm x D580mm x H840mm

Warranty 2 years

The Product should be Indoor Advantage™ Gold certified & complete as per the approved sample and as per the direction of engineer incharge.

21 CEO meeting chair 4 128219.00 512876.00

Supplying and placing of high back revolving chair with headrest having in-built features

Detailed description is given below:

SEAT ASSEMBLY: The seat is to be made up of hot- pressed plywood moulded polyurethane foam and upholstered with fabric.

Seat Pan Height 16.7"-21.7"(425mm - 552mm) Seat Pan depth 16.7"-18.9" (425mm - 480mm) Seat Pan width 18.9" (480mm). Seat Fabric to be made out of

Composition 100% polyester.

With Abrasion rubs martindale (EN ISO 12947-2) 75,000, double rubs (ASTM D4157-07)) 100,000

Pilling scale Value 4, Light fastness scale 5-7, Rubbing fastness scale 4-5, Flammability EN 1021 1 &2, CAL 117E

BACK ASSEMBLY: The two part assembly upholstered with Mesh fabric is made up of back outer injection moulded in Nylon and back inner injection moulded in

Nylon. The back consist of adjustable Lumbar support made of injection moulded having an adjustment of 6.7"-8.8"170mm-225mm. Soft mesh back made out of

30% weft polyester+30%warp polyester+40% polyelastrometric. Abrasion resistance > 40000 (Martindale), Light fastness 4.5 (AATCC-16)

Backrest Height 20.3"(515mm), Backrest Width 18.3"（460mm）

Height ADJUSTABLE ARMRESTS: It is made up of glass filled Polyamide arm structure with PU armtop and height adjustments of 6.7"-10.4" (170mm -

265mm). Width between armrest 17.5" (445mm).

Finance/ BD / Tech / Marketing head MECHANISM: The mechanism should have following features i.e. 360° revolving type, Weight activated mechanism for tilt tension control, 3 position back stop

chair giving option of variable tilt to the chair. Back recline 18° from the upright position

SEAT DEPTH ADJUSTMENT: Seat adjustment through a sliding mechanism in range of 5± 0.5 cm.

PNEUMATIC HEIGHT ADJUSTMENT: The adjustment range should be of 425mm - 552mm

PEDESTAL ASSEMBLY: The pedestal is in polshed aluminium and fitted with 5no. Twin wheel castor.

TWIN WHEEL CASTOR: The twin wheel castors are injection moulded in Black nylon

Description Overall Dimensions Width 27"(686mm), Depth 26"(660mm), Height 37"(940mm),

The product should be BIFMA and Greengaurd Gold / Indoor Advantage™ Gold certified. Warranty period: Minimum 10 Years.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Specification Ref. Image QTY Rate DSR Amount NDSR Amount

Supplying and placing of visitor chair having in-built features

SEAT/BACK ASSEMBLY: The seat is made out of flat plywood, upholstered with moulded polyurethane form and fabric with total thickness of 4.5 to 5 cm. Seat

width: 495mm(W) x 45-50mm ( H) , Seat Depth : 474mm

The Back is upholstered with Mesh fabric is made up of back outer injection moulded in Nylon.

Seat Fabric to be made out of Composition 100% polyester.

a. With Abrasion rubs martindale (EN ISO 12947-2) 75,000, double rubs (ASTM D4157-07)) 100,000

b. Pilling scale Value 4

c. Light fastness scale 5-7

d. Rubbing fastness scale 4-5

e. Flammability EN 1021 1 &2, CAL 117E

HIGH RESILENCE POLYURETHANE FOAM: The HR polyurethane foam on seat is moulded with density = 50± 2 kg/cum

Finance/ BD / Tech / Marketing head UNDERSTRUCTURE ASSEMBLY: The understructure assembly is a cantilever type mainframe made ofk M.S ER.W. Tube and powder coated to 40-50

visitor chair microns

ARMREST ASSEMBLY :The arm rest are 2.5 thick. thick M.S. E.R.W. tube with black arm pads.

The product should be BIFMA and Indoor Advantage™ Gold certified. Warranty period: Minimum 5 Years

Providing & placing revolving chair having in-built features like Centre Tilt Synchronous Mechanism with tilt tension adjustment , Upright position locking, Seat

Height Adjustment, Armrests

The specification required should conform as given below : The chair having in-built features like Synchronous Tilt Mechanism with tilt tension adjustment ,Upright

position locking, Seat Height Adjustment, Height adjustable Armrests etc. Detailed description is given below:

SEAT ASSEMBLY: The seat is made out of flat plywood, upholstered with moulded polyurethane form and fabric

Seat Pan Height 16.7"-21.7"(425mm - 552mm), Seat Pan width 18.9" (480mm)

Seat Fabric to be made out of Composition 100% polyester.

BACK ASSEMBLY: The two part assembly upholstered with Mesh fabric is made up of back outer injection moulded in Nylon and back inner injection moulded in

Nylon. The back consist of adjustable Lumbar support made of injection moulded having an adjustment of 6.7"-8.8"(170mm-225mm. Soft mesh back made out of

100% polyester,

ARMRESTS: HEIGHT ADJUSTABLE ARMRESTS: It is made up of glass filled Polyamide arm structure with PU armtop and height adjustments of 7.8"-11"

MECHANISM: The mechanism should have following features i.e. 360° revolving type,upright position locking , tilt tension adjustment,

24 Task chairs for workarea 82 35778.00 2933796.00

Back recline 18° from the upright position

PNEUMATIC HEIGHT ADJUSTMENT: The adjustment range should be of 425mm - 552mm

PEDESTAL ASSEMBLY: The pedestal is injection moulded in glass filled Nylon and fitted with 5no. Twin wheel castor.

TWIN WHEEL CASTOR: The twin wheel castors are injection moulded in Black nylon.

Description Overall dimensions: Width 690mm, Depth 690mm, Height 970-1090mm, Seat Height 425-545mm.

The product should be BIFMA ertified. Warranty period: Minimum 5 years.

Supplying and placing of high back revolving chair with headrest having in-built features

Detailed description is given below:

SEAT ASSEMBLY: The seat is to be made up of hot- pressed plywood moulded polyurethane foam and upholstered with fabric.

Seat Pan Height 16.7"-21.7"(425mm - 552mm) Seat Pan depth 16.7"-18.9" (425mm - 480mm) Seat Pan width 18.9" (480mm). Seat Fabric to be made out of

Composition 100% polyester.

With Abrasion rubs martindale (EN ISO 12947-2) 75,000, double rubs (ASTM D4157-07)) 100,000

Pilling scale Value 4, Light fastness scale 5-7, Rubbing fastness scale 4-5, Flammability EN 1021 1 &2, CAL 117E

BACK ASSEMBLY: The two part assembly upholstered with Mesh fabric is made up of back outer injection moulded in Nylon and back inner injection moulded in

Nylon. The back consist of adjustable Lumbar support made of injection moulded having an adjustment of 6.7"-8.8"170mm-225mm. Soft mesh back made out of

30% weft polyester+30%warp polyester+40% polyelastrometric. Abrasion resistance > 40000 (Martindale), Light fastness 4.5 (AATCC-16)

Backrest Height 20.3"(515mm), Backrest Width 18.3"（460mm）

Height ADJUSTABLE ARMRESTS: It is made up of glass filled Polyamide arm structure with PU armtop and height adjustments of 6.7"-10.4" (170mm -

265mm). Width between armrest 17.5" (445mm).

MECHANISM: The mechanism should have following features i.e. 360° revolving type, Weight activated mechanism for tilt tension control, 3 position back stop

25 Board Room Chair 17 67638.00 1149846.00

giving option of variable tilt to the chair. Back recline 18° from the upright position

SEAT DEPTH ADJUSTMENT: Seat adjustment through a sliding mechanism in range of 5± 0.5 cm.

PNEUMATIC HEIGHT ADJUSTMENT: The adjustment range should be of 425mm - 552mm

PEDESTAL ASSEMBLY: The pedestal is in polished Aluminum and fitted with 5no. Twin wheel castor.

TWIN WHEEL CASTOR: The twin wheel castors are injection moulded in Black nylon

Description Overall Dimensions Width 27"(686mm), Depth 26"(660mm), Height 37"(940mm),

The product should be BIFMA and Greengaurd Gold / Indoor Advantage™ Gold certified. Warranty period: Minimum 10 Years.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Specification Ref. Image QTY Rate DSR Amount NDSR Amount

Supplying and postioning of Single seater sofa with ergonomical features as given below:

Understructure should be made up of hot pressed plywood (moisture resistance and termite proof ) & solidwood of major cross sections or mesh steel frame

devoid of major knots & surface defects. The seat should be made up multiple layers of PU foam upholstered with corrected leather, fabric or leatherette. The

back should be made up multiple layers of PU foam upholstered with fabric . Leg assembly made out of Solid wooden leg duly polished or metal powder coated.

DIMENSIONS : Width 830mm, depth 780mm, height 740mm.

26 Reception Lounge 1 252933.00 252933.00

WARRANTY: 5 years against any manufacturing defect

Supplying and postioning of Triple seater sofa with ergonomical features as given below:

Understructure should be made up of hot pressed plywood (moisture resistance and termite proof ) & solidwood of major cross sections or mesh steel frame

devoid of major knots & surface defects. The seat should be made up multiple layers of PU foam upholstered with fabric . The back should be made up multiple

layers of PU foam upholstered with fabric. Leg assembly made out of Solid wooden leg duly polished or metal powder coated.

DIMENSIONS : Width 1800mm, depth 910mm, height 730mm, ± 5%

27 Reception Sofa 1 342991.00 342991.00

WARRANTY: 5 years against any manufacturing defect

Providing and positioning of rectangular nesting centre Table.

Table top shall be made out of Wooden veneer / ceramic with brushed steel finish legs.

DIMENSIONS table 1: :L900mm x D900mm and height 370 mm,

DIMENSIONS table 2: :L1020mm x D600mm and height 270 mm,

WARRANTY: 5 years against any manufacturing defects.

DESIGN : as per the attached design intent

28 Reception nesting table 1 146734.00 146734.00

Supplying of chair in fabric upholstery

Steel / Wooden structure PU moulded frame duly fabric upholstered.

Base is 5 star electrostatic metal polished as per architects choice.

Fabric to be used medley or equivalent.

DIMENSIONS: W640mm x D580mm x H840mm

29 studio room lounge chair Warranty 2 years 2 124679.00 249358.00

The Product should be Indoor Advantage™ Gold certified & complete as per the approved sample and as per the direction of engineer incharge.

Supplying and postioning of Triple seater sofa with ergonomical features as given below:

Understructure should be made up of hot pressed plywood (moisture resistance and termite proof ) & solidwood of major cross sections or mesh steel frame

devoid of major knots & surface defects. The seat should be made up multiple layers of PU foam upholstered with fabric . The back should be made up multiple

layers of PU foam upholstered with fabric. Leg assembly made out of metal powder coated.

30 studio room sofa 1 253182.00 253182.00

DIMENSIONS : Width 1800mm, depth 800mm, height 720mm, ± 5%

WARRANTY: 5 years against any manufacturing defect

The product should be BIFMA and Greengaurd certified.

Providing and positioning of rectangular centre Table.

Table top shall be made out of painted MDF with metal powder legs.

31 studio room side table DIMENSIONS: :D400mm and height 432 mm, 3 64754.00 194262.00

WARRANTY: 5 years against any manufacturing defects.

DESIGN : as per the attached design intent

Providing and positioning of rectangular centre Table.

Table top shall be made out of painted MDF with metal powder legs.

DIMENSIONS: :D600mm and height 356 mm,

32 studio room centre table 1 111582.00 111582.00

WARRANTY: 5 years against any manufacturing defects.

DESIGN : as per the attached design intent

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Specification Ref. Image QTY Rate DSR Amount NDSR Amount

Supplying and postioning of Double seater sofa with ergonomical features as given below:

Structure should be made up of hot pressed plywood (moisture resistance and termite proof ) & solidwood of major cross sections or mesh steel frame devoid of

major knots & surface defects. The seat should be made up multiple layers of PU foam upholstered with fabric. The back should be made up multiple layers of

PU foam upholstered with fabric. Leg assembly made out of metal powder coated.

DIMENSIONS : Width 1800mm, depth 760mm, height 775mm, ± 5%

WARRANTY: 5 years against any manufacturing defect

The product should be BIFMA and Greengaurd / indoor air quality gold certified.

Supplying and postioning of Single seater sofa with ergonomical features as given below:

Understructure should be made up of hot pressed plywood (moisture resistance and termite proof ) & solidwood of major cross sections or mesh steel frame

devoid of major knots & surface defects. The seat should be made up multiple layers of PU foam upholstered with corrected leather, fabric or leatherette. The

back should be made up multiple layers of PU foam upholstered with fabric. Leg assembly made out of Solid wooden leg duly polished or metal powder coated.

DIMENSIONS : Width 830mm, depth 780mm, height 740mm.

WARRANTY: 2 years against any manufacturing defect

34 CEO lounge chair 2 268628.00 537256.00

Providing and positioning of round nesting combination of two centre Table

Table top shall be made out of Wooden veneer with veneer 4 legged structure

DIMENSIONS : Dia 900 and height 480 mm,

DIMENSIONS : Dia 590 and height 390 mm,

WARRANTY: 5 years against any manufacturing defects.

DESIGN : as per the attached design intent

35 CEO Centre Table 1 164315.00 164315.00

Providing and positioning of round side Table.

Table top shall be made out of Wooden veneer with veneer 4 legged structure

DIMENSIONS : Dia 590 and height 390 mm,

WARRANTY: 5 years against any manufacturing defects.

DESIGN : as per the attached design intent

Mobile powder coated or prelaminated particle board Box file 2 drawer pedestal cabinet, support A4 and F4 file storage, comes with pencil tray, equipped with

weight-rated castors and full extension ball bearing slides for all drawers, anti tilt system security, fifth castor to support lower drawer weight, increased frame’s

structural stability, available option of key lock or combination lock.

The 2-drawer unit shall be of size L395xW500xH400mm

37 2 Drawer metal pedestal 48 14349.00 688752.00

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Specification Ref. Image QTY Rate DSR Amount NDSR Amount

Supplying of Main chair with in Mesh back and fabric seat with headrest Seat, and backrest made of CFC freepolyurethane foam

SEAT ASSEMBLY: The seat is to be made up of hot- pressed plywood moulded polyurethane foam and upholstered with fabric with total thickness of 4.5-5 cm.

a. Seat Pan Height 16.5"-21.5"(419mm - 546mm)

b. Seat Pan depth 15.5"-18.5" (394mm - 470mm)

c. Seat Pan width 19.9" (505mm)

BACK ASSEMBLY: The two part assembly made out of stem central loopspine that supports a series of Fronds that extend like leaves. The structure of the Stem

should provide a dynamic foundation at the base of each individual Frond. The Stem and Fronds form one piece that works together, eliminating the hard outer

edge and Mesh cover on top. Fronds made from acetal, a flexible and strong material that helps the chair flex, the Fronds were developed and engineered to work

specifically with back. They are molded extensions of the Stem, creating one part. Overlaying the Fronds and Stem, the Cradle works in concert with them.

Chair should Provide total back support, from the pelvic and lumbar region to the thoracic region.

• The built-in Wave Suspension should be fitted with a three-dimensional outer layer

• Lofted mesh back to provide support and breathability

To be provided with 4D arms

Pneumatic Height Adjustment with Standard range: 16.5"–21.5" (419mm-546mm)

Seat Depth Adjustment of 3" (75mm) to 4" range

Tilt Tension Control to be provided to regulate the amount of resistance felt when leaning back in the chair and the effort required to recline the chair backwards.

Back should recline 24° from upright position

Back stop with 5 positions–upright and every 7-9° of recline

DIMENSIONS: 29" ( W) x 41.4" (H) x 28.5" mm (D), ± 5%

Five star base of nylon with hard or soft castors.

WARRANTY: 12 Years

Product should be GREENGUARD Gold SCD Indoor Air advantage certified & BIFMA certified

The Product should be complete as per the approved sample and as per the direction of engineer incharge.

Providing and placing reception table of 2900mm (L) X1050 (L) X 750mm(W) X 900mm(H). The table shall have two nos table tops of height 900mm and 750mm.

The 900mm high Table top should be of two layers bottom layer to be made out of with ply board and upper layer with 6mm thick polished corian on the top and

bottom ,the edging shall be of matching with the top colour tone. The working table shall be 25mm thick ply duly laminated with 1mm thick laminte and 0.8mm

backing laminate. In the understructure the side panel legs shall be 18mm thick MDF Polished , connected to the top panel by minifix & wooden dowels. The

modesty shall be combination of MDF panel PU polished. The inside of the understructre shall be covered in 0.8mm thick backing laminate. The understructure

shall have power management through cable trays and fliptop boxes. Table to be provided with 3 drawer laminated pedestal made out of 18mm prelaminated

particle board. The work shall be carried out as per the directions recieved from Engineer incharge.

39 Reception Table 1 313361.00 313361.00

Supplying and placing of Full height storage of size L2900xD400xH1800mm with combination of openable swing door shutters, open shleves and drawer units.

Storage Unit shall be provided with shutters, open shlves and drawers units made out of 18mm thick prelaminated particle board and back in 9mm thick

prelaminated particle board. The drawer shall be fitted with full extension, ball bearing slides and handles. Storage units To be provided with finger grooves.

The top, door and shelf are with 2mm PVC egde Imported banding & other panels are with 0.8mm thick PVC Imported edge banding. The units are assembled by

knock down fittings such as Minifix & Dowels. Indluding all the hardware and Hinges.

The Laminate is Low pressure laminate also know as melamine in LPL prelaminated particle board.

Desk Marketing / BD / Tech Side and

overhead storage

Supplying and placing of overhead storage of size L2300xD400xH600-900mm with combination of openable swing door shutters.

Storage Unit shall be provided with shutters made out of 18mm thick prelaminated particle board and back in 9mm thick prelaminated particle board. It shall be

fixed on wall with help of fastners.

The top, door and shelf are with 2mm PVC/ABS egde Imported banding & other panels are with 0.8mm thick PVC Imported edge banding. The units are

assembled by knock down fittings such as Minifix & Dowels. Indluding all the hardware, locks and Hinges.

The Laminate is Low pressure laminate also know as melamine in LPL prelaminated particle board.

41 Legal / HR overhead storage 2 38422.00 76844.00

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: FURNITURE

S No Item Specification Ref. Image QTY Rate DSR Amount NDSR Amount

Supplying and placing of overhead storage of size L1200xD400xH600-900mm with combination of openable swing door shutters.

Storage Unit shall be provided with shutters made out of 18mm thick prelaminated particle board and back in 9mm thick prelaminated particle board. It shall be

fixed on wall with help of fastners.

The top, door and shelf are with 2mm PVC/ABS egde Imported banding & other panels are with 0.8mm thick PVC Imported edge banding. The units are

assembled by knock down fittings such as Minifix & Dowels. Indluding all the hardware, locks and Hinges.

The Laminate is Low pressure laminate also know as melamine in LPL prelaminated particle board.

42 Finance & Tech Calling overhead storage 8 26739.00 213912.00

Supplying and placing of overhead storage of size L1750xD400xH600-900mm with combination of openable swing door shutters.

Storage Unit shall be provided with shutters made out of 18mm thick prelaminated particle board and back in 9mm thick prelaminated particle board. It shall be

fixed on wall with help of fastners.

The top, door and shelf are with 2mm PVC/ABS egde Imported banding & other panels are with 0.8mm thick PVC Imported edge banding. The units are

assembled by knock down fittings such as Minifix & Dowels. Indluding all the hardware, locks and Hinges.

The Laminate is Low pressure laminate also know as melamine in LPL prelaminated particle board.

43 Secretary overhead storage 2 30037.00 60074.00

Supplying and placing of Freestanding planter boxes of size D450xH1150mmxL1200mm

The planter box made out of metal duly powder coated or HDHMR board laminated of height 250mm.

The laminated non openable/swing door unit of height 900mm shall be provided made out of 18mm thick prelaminated particle board and back in 9mm thick

prelaminated particle board.

The top & structure are with 2mm PVC egde Imported banding & other panels are with 0.8mm thick PVC Imported edge banding. The units are assembled by

knock down fittings such as Minifix & Dowels. Indluding all the hardware and Hinges.

The Laminate is Low pressure laminate also know as melamine in E1 grade LPL board. The LPL is complied with IS 12823:1990 (Wood products - prelaminated

particle boards specification). It covers major LPL performance such as scratch resistance, wear resistance, stain resistance with inclusion of Formaldehyde test

44 Planter Boxes meeting E1/E2 standards. 9 46551.00 418959.00

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-ACESSORIES

S No Item Description Quantity Unit Rate DSR Amount NDSR Amount

1 FROSTED FILM

GLASS FILMS: Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-

blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having minimum

tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on

1.1 MR Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors). 300 sq m 2,467.00 740,100.00

2.1 MR Providing of 8'x6' hand tufted carpet for reception area 1 No 157,914.00 157,914.00

2.2 MR Providing of 9'x8' hand tufted carpet for studio room 1 No 157,914.00 157,914.00

2.3 MR Providing of 8'x6' hand tufted carpet for CEO cabin 1 No 157,914.00 157,914.00

2.4 MR Providing of 7' dia hand tufted carpet for CEO cabin 1 No 157,914.00 157,914.00

Providing and fixing soft, elegant fashion and function of contour window shadings with 5 inches vanes that makes this remarkable window

covering a truly unique innovation. The blind has sheer fabric at the back and the vanes contract and expand giving an impression of vanes

floating on the sheer. The headrail and bottom rail are made of aluminum alloy extruded profile, powder coated and provided with same fabric

as per the blind fabric selection.Textured fabrics in a palette of delightful colours transform from cascading folds to contoured vanes, allowing a

softened outside view through the sheer backing, while also providing excellent ultraviolet protection. The fabric opacity is room darkening with

5’’ vane size and comes with Six beautifully textured fabric styles — India Silk, Linen, Satin, Satin Metallic, Shantung and Stria. The blind has

3.1 MR matching fabric-covered headrail and bottom rail create a unified look from top to bottom. The headrail conceals and protects the shading when 20 Sqm 47,807.00 956,140.00

raised — no fabric stack to obstruct the outside view.

Supplying & Fixing of Duolite blind- Sheer with double honeycomb fabric. Blinds with design option of Duolite having Sheer fabric on the top

and double honeycomb fabric on the bottom gives natural daylight to come inside and maintain privacy with one head rail fabric consisting of ¾

“Honeycomb within a Honeycomb” with 3 air pockets for maximum energy efficiency. Duette fabric with high tear strength constructed out of

Anti-static, resilient, colour fast & Sanitized Treated 100% spun bonded non-woven polyester fibre & precision manufacture to form a

hexagonally shaped duette pleat with cellular construction. Head rail and bottom rail constructed of aluminium alloy 6063-T6 internally and

externally fit with colour coordinated components required for specified performance and designed for smooth, quiet, trouble-free operation.

The head rail shall measure 50mm*47.625mm*1.27mm thick constructed of aluminium alloy 6063 T6 PER ASTM B221-85. Internally fit with

components required for specified performance designed for smooth, quiet, trouble-free operation. Finish to be standard Powder coated white

finish with a thickness of 60-80 microns. The bottom rail measuring 47.625mm*11.68mm * 1.27mm thick constructed of aluminium alloy 6063-

T6 PER ASTM B221-85 with standard powder coated white finish with a thickness of 60-80 microns. Fabric shall be constructed from spun-

bonded polyester fibre, precision manufactured to form a hexagonally shaped, dual pleat, cellular construction. All cords & cord holes shall be

fully concealed inside the fabric structure. As each of the hexagonal cells is formed individually, pleats operate independent of each other

providing superior pleat retention & structure strength. Fabrics meet all requirements of NFPA 701 small scale flammability testing for

commercial installation applications. Installation brackets shall be of high-tension spring steel suitable for overhead & wall mounting & for use in

3.2 MR conjunction with extension bracket. Extension bracket shall be press-formed from 19x3.2mm mild steel finished in clear passivated Zinc plate. 53.4 Sqm 41,867.00 2,235,697.80

Polyester Cord shall be 0.9mm in diameter & of woven hollow core construction. Rail slat insert shall be of 25mm wide, 0.175 or 0.2mm thick

crowned aluminium slat. End cap shall be moulded acrylic colour matched to the head & bottom rails. Cord equaliser shall be injection moulded

from impact modified acrylic with a high flexural module etc., all complete as per directions of Engineer-in-charge. Duette Duolite having Sheer

fabric on the top and double honeycomb fabric on the bottom gives natural daylight to come inside and maintain privacy with one head rail.

Duolite design option has the single honeycomb sheer fabric that is adjoined to the double honeycomb fabric at the bottom that gives a view

through whenever required and can be adjusted at any desired degree. Sheer fabric comes for the entire window size and gives an option to

have entire window covered with sheer fabric and the double honeycomb fabric gets stacked at the bottom.

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-ACESSORIES

S No Item Description Quantity Unit Rate DSR Amount NDSR Amount

4 INDOOR GAMES -

Providing of full size premium TT Table of make STAG with quick easy setup for Breakout Space, The Stag Active table sets up completely flat

to allow a flawless experience while playing. This superbly crafted indoor professional table is 2.74m in length, 1.525m in width and 76cm in

height, thus keeping with the international professional standards. Set it up in any indoor space and practise your skills without compromise. The

playing surface is of 25 mm thickness, providing accurate bounce offs and friction required for a professional. Quality checked for uniformity and

consistent bounces. Each extendable leg is fitted with height adjusting knobs to match your play height. The base knob is also made to offer a

better grip over all kinds of floor surfaces. You can adjust the table as you see fit and place it in any corner of the room without damaging the

floor surface. Two of the wheels come with locks to ensure safety and stability of the table during playtime or storage. The table is equipped with

easy-to-setup bolts making it easier to fold and unfold it. With an approximate assembly time of 7 minutes, you start smashing through a game

Providing of STAG Global Professional Black Carrom Board on wheels with 9 neon orange and 9 neon green coins and a striker. The bac

should be steadily reinforced to enhance the flatness and prevent the warping.

5 COAT HANGER -

5.1 MR Providing of Coat Hanger for CEO Cabin 2 No 7000.00 14,000.00

Grand Total 4,610,693.80

Grand Total 4,610,693.80

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: LANDSCAPE

S NO DSR/MR Image Description Unit Qty Rate DSR Amount Non DSR Amount

MossWall - Customised

“Wall Panel - Plain; Supply, Testing and Commissioning of

maintenance free Moss Wall of size 600mm x 400mm panel. The

plants shall be for indoor use only and require no direct sunlight or

watering/ spraying of water. It is certified for sound absobtion rate;

1 MR fire resistance and has a very hostile environment for reproduction Sqm 30 57,653.00 1,729,590.00

of insects. Please ensure 40% humidity at all times. It does not

require any trimming as well, hence a maintenance free product".

Make: Verde Profilo, Italy

Supply of full soil fill conical shaped planters of specified volume and

dimensions in stone finish or equivalent. planters to be indigenously

made by rotational moulding, with homogeneous recyclable,

industrial grade polymer-resin mix, and textured surface. planters

should have an integrated water outlet hole & plug, single layered

peel-proof construction, light weight, rust proof, uv stabilized, anti-

frost feature without any joints, and easy to clean. planter supplier

must give 1 year warranty against any fading or cracking for both

MR indoor and outdoor use. green plant and laying is extra. potting

instructions as per company catalogue.

Supply of double layered translucent backlit cylinderical shaped -

hand carfted pattern planters of volume 40 ltr; approx. dimension

40(h)x18.5(d) in granite/ stone/ solid finish or equivalent. planters

to be indigenously made by rotational moulding, with homogeneous

100% recyclable, industrial grade polymer-resin mix, with textured

surface and stone match finishes. planters to have concealed shock

resistant back lighting system with secured supply wire and an

integrated water outlet hole & plug, peel proof construction,

3 MR asbestos free, light in weight, without any joints, rust proof, uv Nos 10 25,000.00 250,000.00

stabilized, anti-frost feature and easy to clean. planter supplier must

give 1 year warranty against any led, fading or cracking for indoor

and outdoor use.

Plantation: Supply and installation of Natural Plant with sand,

fertilizer etc.

1 Digitally signed by RAJ PAL

2 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-SIGNAGE

S No DSR/ MR Description Quantity Unit Rate DSR Amount NDSR Amount

Providing and fixing of signage made

out of acrylic sheets of 6mm

thickness. Height of each letter will

be 450mm and in width

proportionally. Letters to be fixed on

the partition using industrial grade

adhesive. Depth of each letter to be

Providing and fixing of signage made

out of acrylic sheets of 6mm

thickness. Height of each letter will

be 250mm and in width

proportionally. Letters to be fixed on

the partition using industrial grade

adhesive. Depth of each letter to be

Providing and fixing of signage for

bathroom doors, server room etc

made out of laser cut SS sheet of

2mm thickness and size

300mmx150mm powder coated to

Providing and fixing of signage for

fire exit signage of laser cut SS sheet

4 MR of 2mm thickness and size 1 Lumpsum 56849.00 56,849.00

300mmx150mm powder coated to

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: STUDIO WORKS

S No DSR/ MR Description Unit QTY Rate DSR Amount NDSR Amount

SITC of 86" 4k, UHD Professional Signedge Display with 500 NITS, 24*7

,Built in SOC/ Media Playerwith Quad Core Processor, Built in Open Platform

Android 11, 3X HDMI, Audio Input Audio Output, Built in Speaker(12W x 2)

;Including mounting bracket, Built-in Chromecast, Dolby Digtial audio HDMI-

1 MR CEC device linking supported, 3 USB(2.0), 3*HDMI(2.0 Side), Headphone Nos 1 486950.00 486950.00

Out, 1 *RJ 45, SPDIF out, Built In 2.4 GHZ Wifi,CPU Built in Mali G31 MP2

GPU-A55*4, 1.1 GHz Processer, 4 GB RAM 32GB Storage,Metal Frame 12

W built speakers, With 3 years on Site Warranty

SITC of Full HD Unibody 8-Channel Digital Video Switcher, Video Standard

Full HD, Video Format Input: 1080p 50/ 59.94/ 60Hz, 1080i 50/ 59.94/ 60Hz,

720p 50/ 59.94/ 60Hz Video Processing SDI: 4:2:2 HDMI: YUV 4:2:2, RGB:

4:4:4, with Input Routable / Crosspoint, 8 live inputs Minimum 4 x SDI, 4 x

HDMI, and 3 x SDI 3 x HDMI assignable out: Multiview, PGM, PVW,

PGM+DSK, Clean PGM, Clean PVW, Input 1-8, STILL 1, STILL 2, Flex

source, Built-in Multi-view Monitoring Out, 2 x XLR/MIC (6.3mm) Combo

Socket 1 x Stereo RCA set (L/R), O/P 1 x Stereo RCA set (L/R), Audio Delay

Calibration Up to 16 fields or 8 frames per channel, with 4 no of Chromakey &

Title Creator, Picture in Picture 4 Plus 4 more PIP with Flex total 8 x PIP, 2 x

DSK, Tally Output 1x D-sub 25pin, dual color, PC Remote Control RS-232 /

DVIP (Ethernet) User Memory Preset Free Virtual Set and Stinger transition

SITC of H.264 Dual Streaming Encoder with SD Card recorder, H.264/AVC

High Profile Level 4.1, Audio Input:-1 x HDMI embedded audio, (Audio

depends on the source/ both stereo and mono supported) 1 x SDI embedded

audio, 1 × RCA (audio level calibration: +10/+12dB ~ -6dB), 2 x XLR (audio

level calibration: +10/+12dB ~ -6dB), Mix (Embedded + RCA+XLR), Video

3 MR Input:- HDMI x1, SDI x1, Video Bitrate:- Record Only: Up to 16Mbps Nos 1 214547.00 214547.00

(1080p50/60 Stream Only: Up to 10Mbps (1080p50/60), Rec and Stream: Up

to 36Mbps (1080p50/60) (dual stream), Streaming Protocols:-TS over

TCP/UDP (unicast & multicast) RTSP over HTTP/TCP/UDP (RTSP

Elementary Stream) RTMP/RTMPS (Publish) SRT

SITC of HDMI to USB 3.0 Capture Box with Input Video Bandwidth 150MHz

4 MR (pixel clock rate) and Output Video Bandwidth Up to 350Mbps (USB), Capture Nos 1 60576.00 60576.00

Video Format YUY2 (USB3.0), MJPG (USB2.0/3.0)

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: STUDIO WORKS

S No DSR/ MR Description Unit QTY Rate DSR Amount NDSR Amount

SITC of PTZ Camera Teleprompter 15" monitor with integrated dvPrompter

Plus software, Camera-Mount Interface Adjustable Lift, Multi-language

Support, LCD Native Resolution 1024x768, LCD Brightness 350 Nit,

Monitoring and control via LAN etc.

SITC of PTZ Camera Controller, can controll up 4 camera or more, Build-in

6 MR Control Panel with Monochrome display, Input/Output RS-422 (RJ-45 Nos 1 237264.00 237264.00

Connector) x 4 etc.

SITC of ProRes 4K Video Recorder- Desktop, Video Standard UHD & HD,

with Multi-channel Recording upto 4-CH HD or better, Video Format:

50/59.94/60Hz, Supported Video Input Signal: 1x 3G/12G-SDI, 3x 3G-SDI, 1x

7 MR HDMI 2.0, 1x HDMI 1.4, Video Output: 1x 3G/12G-SDI, 1x HDMI 2.0, 3x Nos 1 633541.00 633541.00

HDMI 1.4, Video Recording Bit Rate / Color Sampling: ProRes 422 HQ,

ProRes 422, ProRes 422 LT, ProRes 422 Proxy, Preview display 5" Touch

LCD, External Control RS-232/422 (Dsub 9pin), DVIP (Ethernet), Recorded

File Format QuickTime .MOV etc.

SITC of 12x 4K PTZ Camera with 12x Optical Zoom, 16x Digital Zoom or

better Image Sensor 1/2.5" CMOS, Effective Pixels (approx.) 8.51Mega

Pixels, S/N Ratio ≥55dB, Min. Illumination 0.5 Lux @ (F1.8, AGC ON) or

better, Electronic Shutter 1/30s ~ 1/10000s, White Balance Auto, Indoor,

Outdoor, OnePush, Manual, VAR, with AGC / Gain Control, with Mirror / Flip

Image, Panning / Tilting Range Pan: 300° Tilt: +130° to -15° with 255 Preset,

Focal Length 12x, f = 4.4mm ~ 52.8mm, F1.8 ~ F2.6, Field of View

(Horizontal, Wide) 71°, Video Output: HDMI 2.0 x1, 3G-SDI x1, 10/100/1000M

RJ45 x1, Control Protocol: Pelco-D, Pelco-P, VISCA, VISCA over IP, NDI,

DVIP, Remote Control Interface: IR, Web GUI, RS-422, DVIP, NDI,

Streaming Protocols: RTSP, RTMP(S), Onvif, Multicast, SRT etc.

9 MR SITC of Tripod with Playload upto 10KG for Teleprompter etc. Nos 1 75723.00 75723.00

10 MR SITC of Tripod with Playload upto 7KG etc. Nos 2 45435.00 90870.00

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: STUDIO WORKS

S No DSR/ MR Description Unit QTY Rate DSR Amount NDSR Amount

SITC of Digital UHF Wireless Handheld Microphone System, Dynamic, 24 bit

Digital Audio, Dynamic Range - 118 dB or better, Frequency Response : 20 to

20,000 Hz, Polar Pattern : Cardioid, Channels – Upto 30 simultaneous

Channels per frequency bands, Switching Bandwidth - 42 MHz or better,

Frequency Auto Scan Functionality, Range – 300 ft or more, RF Transmitter

Output : 10 mW, Should have LAN port for monitoring, Should include

rechargeable batteries and charger, Battery Life : 8 hours or more etc all

SITC of Digital UHF Wireless Lapel Microphone System, Condenser, 24 bit

Digital Audio, Dynamic Range - 118 dB or better, Frequency Response : 20 to

20,000 Hz, Polar Pattern : Omnidirectional, Channels – Upto 30 simultaneous

Channels per frequency bands, Switching Bandwidth - 42 MHz or better,

Frequency Auto Scan Functionality, Range – 300 ft or more, RF Transmitter

Output : 10 mW, Should have LAN port for monitoring, Should include

rechargeable batteries and charger, Battery Life : 8 hours or more etc. all

SITC of Apple Mac Studio, 10-core CPU with 8 performance cores and 2

efficiency cores, 24-core GPU, 16-core Neural Engine, 400GB/s memory

bandwidth, 32GB unified memory, 512GB SSD, Support for up to four Pro

Display XDRs (6K resolution at 60Hz and over a billion colours) over USB-C

and one 4K display (4K resolution at 60Hz and over a billion colours) over

HDMI with Mouse and keyboard

14 MR SITC of 34 (86.36cm) 21:9 Curved QHD (3440 x 1440) Monitor Nos 1 93394.00 93394.00

SITC of 100W LED Soft Panel Light 5600K colour temperature. CRI,TLCI and

R9 value above 95. Uniform shadow less output, No heat from light, No UV

radiation, control mode:Manual and DMX control mode through 5pin. Extreme

soft illumination with diffuser. 0 ~ 100% linear dimming. Black powder coated

fabricated housing with normal yoke but without accessories

SITC of MS fabricated 4-leaf barndoor for 100W LED Soft Panel Light

SITC of 60W Maxi lights complete with 2700K~5700K CCT 60W Chip On

Board LED Lamp source, CCT tunable, Manual control & Manual control &

17 MR DmX 100% to 0%, CRI-98, TLCI-99 & R9 value 96 throughout the spectrum & Nos 2 58800.00 117600.00

while dimming. LED Display for CCT & Dimming Level, Black finish housing,

IP20 protection with Barndoor, Diffuser.

SITC of 3 Section ENG Light stand having maximum extension of 8 ~ 10 Feet

18 MR provided with bottle and easy locking, release with black powder coated finish Nos 2 4794.00 9588.00

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES: STUDIO WORKS

S No DSR/ MR Description Unit QTY Rate DSR Amount NDSR Amount

19 MR SITC of SPUD for the above Stand Nos 2 1464.00 2928.00

SITC of Light fixture mouting clamp customized for suspending on fixed bars

20 MR on stage made up of Aluminium or MS material complete with black powder Nos 4 1835.00 7340.00

coating matt black finish.

SITC of Light Fixture dual safety chain made up of GI wire rope bundled and

21 MR twisted together having load bearing capacity above 200 Kgs, Sleve on the Nos 4 770.00 3080.00

SITC of Cables, Connectors, Snake, Patch panel (Including HDMI, USB

Extension Cable, Microphone and Speaker Cables)

Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - AV SYSTEM

S No DSR/MR Item Description UoM QTY Rate DSR Amount NDSR Amount

SITC of All In One 138" Diagonal Screen, Pixel Pitch (mm) P1.5, Aspect

Ratio 16:9, Resolution 1920×1080, Operating System Android 9.0, CPU

Dual Cortex-A72 large core + four Cortex-A53 small core, frequency

2.0GHz, RAM 4GB, Storage 32GB, built-in 2*30W audio, support 2.0

channels, Supports Bluetooth function with required wall mount etc all

SITC of 86" 4k, UHD Professional Signedge Display with 500 NITS, 24*7

,Built in SOC/ Media Playerwith Quad Core Processor, Built in Open

Platform Android 11, 3X HDMI, Audio Input Audio Output, Built in

Speaker(12W x 2) ;Including mounting bracket, Built-in Chromecast, Dolby

2 MR Digtial audio HDMI-CEC device linking supported, 3 USB(2.0), 3*HDMI(2.0 Nos 1 486950.00 486,950.00

Side), Headphone Out, 1 *RJ 45, SPDIF out, Built In 2.4 GHZ Wifi,CPU

Built in Mali G31 MP2 GPU-A55*4, 1.1 GHz Processer, 4 GB RAM 32GB

Storage,Metal Frame 12 W built speakers, With 3 years on Site Warranty

SITC of 75" 4k, UHD Professional Signedge Display with 400 NITS, 24*7

,Built in SOC/ Media Player with Quad Core Processor, Built in Open

Platform Android 11, With Built in Bluetooth, 2X HDMI, Audio Input Audio

Output, Built in Speaker(10W x 2) ;Including mounting bracket, Built-in

Chromecast , HDMI Arc, Dolby Digtial audio, The built-in SOC is powered

by Google's Android Platform, HDMI-CEC device linking supported, 2

USB(2.0), 3*HDMI(2.0 Side), Headphone Out, 1 *RJ 45, SPDIF out, Built

In 2.4 GHZ Wifi,CPU Built in With Cortex-A55*4, 1.1 GHz Processer, 2 GB

RAM, 20 W built speakers, With 3 years on Site Warranty

SITC of 65" 4k, UHD Professional Signedge Display with 400 NITS, 24*7

,Built in SOC/ Media Player with Quad Core Processor, Built in Open

Platform Android 11, With Built in Bluetooth, 2X HDMI, Audio Input Audio

Output, Built in Speaker(10W x 2) ;Including mounting bracket, Built-in

Chromecast , HDMI Arc, Dolby Digtial audio, The built-in SOC is powered

by Google's Android Platform, HDMI-CEC device linking supported, 2

USB(2.0), 3*HDMI(2.0 Side), Headphone Out, 1 *RJ 45, SPDIF out, Built

In 2.4 GHZ Wifi,CPU Built in With Cortex-A55*4, 1.1 GHz Processer, 2 GB

RAM, 20 W built speakers, With 3 years on Site Warranty

1 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - AV SYSTEM

S No DSR/MR Item Description UoM QTY Rate DSR Amount NDSR Amount

SITC of 55" 4k, UHD Professional Signedge Display with 500 NITS, 24*7

,Built in SOC/ Media Player with Quad Core Processor, Built in Open

Platform Android 9, Surface Haze 28%,With Built in Bluetooth, 3X HDMI

2.0 , Audio Input Audio Output, Built in Speaker(10W x 2) ;Including

mounting bracket, Built-in Chromecast, Dolby Digital audio, The built-in

SOC is powered by Google's Android OpenPlatform, 2 USB(2.0),

3*HDMI(2.0 Side), Headphone Out, 1 *RJ 45, SPDIF out, Built In 2.4

GHZ Wifi,CPU Built in With Cortex-A55*4, 1.1 GHz Processer, 2 GB RAM

& 16 GB Storage, 20 W built speakers, With 3 years on Site Warranty

SITC of Fixed Wall Mount, capable of holding up to 75 kg and supports

6 MR 37" to 100" displays, VESA Compliant etc all complete Nos 7 17500.00 122,500.00

SITC of Wireless Presentation Platform, allows simultaneous content

sharing for up to four 1080p presenters, Wireless screen casting with iOS,

Android, Mac, Chromebook, and Windows devices through native AirPlay,

7 MR Google Cast, or Miracast protocols, Supports YouTube Live streaming, Nos 1 259550.00 259,550.00

Local storage available for playback of images and video, WPA2-PSK,

and AES-128 encryption etc all complete

SITC of Double Arms Full Motion TV Wall Mount Articulating Swivel TV

8 MR Bracket for Most 45”-75 inch Flat Screen TV VESA Compatible 200x200 Nos 1 48650.00 48650.00

Upto 600x400mm with 45 KgsLoad Capacity

SITC of Cable Cubby with flip top, cover and 6 Pass Through Holes for

multi-format cables, 2 Universal Power Socket , 1 HDMI, 1 USB-C for

Data Transfer, made of aluminium etc all complete etc all complete

SITC of All in One Conference Unit, Camera Sensor 1/2.5″, CMOS,

Effective Pixel: 8.0M, 4 x MEMS mic array, AEC | ANS | AGC 180° Pickup

Angle pickup Range: 5-8m (16-26ft) A.I. camera with smart backlighting,

auto-framing, speaker & presenter tracking, Inputs / Outputs 1x USB-C

Input with Alt-Mode, 1x HDMI Input, 1x HDMI Output etc all complete

2 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - AV SYSTEM

S No DSR/MR Item Description UoM QTY Rate DSR Amount NDSR Amount

SITC of Network PTZ Conference Camera, 12x optical zoom and 60°

horizontal FoV, 1/2.8” low-noise CMOS Sensor, Sensor Scanning Mode:

Progressive, Horizontal Rotation Range: ±170°, Vertical Rotation Range: -

30° to +90°, Image rotation for ceiling mounting, White Balance: Auto,

11 MR indoor, outdoor, one-push, manual, specified color temperature, IP Stream Nos 1 595950.00 595,950.00

Resolutions: H.264 @ 360p, 270p or 180p, a single network cable for

video, power and control data transport, HDMI 2.0 and 3G-SDI Outputs

Power Over Ethernet (PoE) support etc all complete

SITC of 2x1 matrix for AV over IP with USB-C, HDMI 2.0 and USB 2.0

ports Full 4K HDMI 2.0 transmitter (4K UHD @ 60Hz RGB 4:4:4, up to 18

Gbps), Video, USB2.0, Ethernet, GPIO and Serial. USB-C connectivity for

12 MR 4K video, audio, control signals and charging via USB-C up to 100W Nos 5 559655.00 2,798,275.00

(120W total). Advanced automated room automation/control features. etc

SITC of Receiver for recieving HDMI 2.0 + RS-232 + bidirectional IR, over

10G copper network cable. HDCP, 3D and 4K/ UHD (60Hz RGB 4:4:4,

60Hz YCbCr 4:4:4) compliant with HDR support etc all complete

SITC of Receiver for receiving HDMI 2.0 + RS-232 + bidirectional IR, over

10G copper network cable with analog audio output, KVM, and full USB2.0

support. HDCP, 3D and 4K/ UHD (60Hz RGB 4: 4: 4, 60Hz YCbCr 4: 4: 4)

compliant with HDR support etc all complete

SITC of Control Unit (CU) for AV Over IP product line Directly accessible

SDVoE API, 3 RJ45-type Ethernet connectors for flexible network

configuration, Occupancy sensor connector Two RS232 connectors for

device control GPIO interface for device control etc all complete

3 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - AV SYSTEM

S No DSR/MR Item Description UoM QTY Rate DSR Amount NDSR Amount

SITC of Ceiling mic should be easily mountable on any kind on ceiling with

the least visible intrusion and effect to aesthetics. The ceiling mic should

offer ease of connection for setup and maintenance. It is desired that the

mic supports Ethernet based technologies like PoE and Dante for easy

and efficient audio routing.

1. The Ceiling mic should support highly directional speech pickup from

individual talkers in the room.

2. 1 mic should be able to cover minimum 500 Sq. Feet

2. Upto 3 talkers around the room should be covered simultaneously.

3. Talker coverage should be customisable and switchable as per the

seating layout.

4. The microphone should be programmable to enable maximum noise

16 MR rejection from areas in the room with unwanted noise. (e.g pantry, traffic Nos 1 587689.00 587,689.00

The Ceiling mic should be able to efficiently support voice lift & Sound

reinforcement to aid the farthest listener within the room.

The Ceiling Mic should support easy and robust integration with industry

leading Video Conferencing systems, Sound processors and Room

Control applications.

The Product should be certified to work with Industry standard Video

conferencing solutions. It should seamlessly support speech based talker

tracking with third party camera control solutions. The solution should

include Ceiling Mount bracket and mute controls on the table/wall in the

room. etc all complete

SITC of Audio, Video and Control (AV&C) Processor, 64 x 64 networked

audio channels, 8x on-board Flex channels and GPIO, Full-featured

Control engine (with feature license), 8 AEC Processors, up to 32 x 32

17 MR Dante audio channels (8 x 8 included), USB AV bridging (8 x 8 audio + Nos 1 465670.00 465,670.00

Camera support), Full-featured Q-SYS Control engine (with optional

feature license), External USB audio device host, Up to 2x VoIP instances

etc all complete

4 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - AV SYSTEM

S No DSR/MR Item Description UoM QTY Rate DSR Amount NDSR Amount

SITC of 6.5-inch, 2-Way Ceiling Speaker, Rated Power: 60W, Frequency

Range: 65 Hz – 20 kHz, Sensitivity: 88 dB, Rated Coverage 135° conical

DMT, Maximum continuous SPL 106 dB, Nominal impedance: 8 / 16 Ohm,

Transformer taps: 60W / 30W / 15W at 100 / 70V, IP-34 Rated, Low-

saturation and low-loss 70/100V transformers with 16Ω bypass, UL and

CE Certified etc all complete

SITC of 4 Channel Class-D Amplifier, Power (per channels driven): 200 W

at 8 Ω/ 4 Ω/ 100V/ 70V, FlexAmp Technology, Frequency Response: 20

19 MR Hz – 20 kHz, Signal to Noise > 103 dB, Input impedance >10k, balanced Nos 1 195650.00 195,650.00

or unbalanced, User-configurable operating modes, UL, CE, RoHS/WEEE

compliant etc all complete

SITC of 4 x 4 USB 3.2 Gen 1 Industrial Hub Switch, Enables 4 computers

to share 4 USB 3.2 Gen1 devices Support port selection via remote

20 MR controller or RS-422/RS-485 link through 5-pin terminal block Supports DC Nos 1 58560.00 58,560.00

9-24V power input by terminal block, Supports USB BC 1.2 and over

current protection

SITC of Expension Module for RS232 /RS485/RS422 Communication

21 MR Port, Gigabit LAN, Four bi-directional RS232 serial ports, Power over Nos 1 85640.00 85,640.00

Ethernet (PoE) capable etc all complete

SITC of 10.2" Apple iPad LED-backlit Multi-Touch display with IPS

22 MR technology with User Control Interface (UCI) Deployment etc all complete Nos 1 75780.00 75,780.00

SITC of Apple docking and charging station with all required accessories

etc all complete

SITC of 8-Port Gigabit PoE+ Ethernet Smart Switch with 2 SFP Ports and

Cloud Management etc all complete

25 MR SITC of Wireless Access Point etc all complete Nos 1 29500.00 29,500.00

SITC of 2 Meter Premium High Speed HDMI 2.0b Flexy Cable, Bandwidth

up to 18Gbps, Up to 4096x2160@60Hz at RGB 4:4:4 video resolution,

High Dynamic Range (HDR10), Dolby Vision and Hybrid log–gamma

(HLG) video etc all complete

SITC of 15 Meter Active Copper HDMI Cable, Data Rate: Up to 18.2Gbps,

Colour Depth: Up to 16 bits, Colour Formats: RGB 4:4:4 / Y’CBCR 4:2:2 /

Y’CBCR 4:2:0, Consumer Electronic Control (CEC), Auto Lip-Sync

Correction, Audio Return Channel (ARC), Enhanced Audio Return

Channel (eARC), High Dynamic Range (HDR) etc all complete

5 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - AV SYSTEM

S No DSR/MR Item Description UoM QTY Rate DSR Amount NDSR Amount

SITC of 2 Meter USB Full-Featured Type-C cable for USB 3.1 Gen2, 4

Lane Displayport Alt mode (4K60FPS Video and Audio), Supporting

peripherals via USB 2.0 up to 480 Mbps (Mouse, Keyboard, Thumb Drive,

Speakerphone and Webcam) etc all complete

SITC of 15 Meter USB 3.1 Gen1 SuperSpeed Active Extension Cable

TypeA/male to TypeA/female, Supports 4K Webcam, SSD storage, Native

USB2/USB1 and USB3 extension, Plug and play compatible with PC, Mac,

and Linux etc all complete

SITC of 2 Conductor 16 AWG Speaker Cable, stranded Bare copper

30 MR conductors, PVC/Nylon insulation, PVC jacket (as per actual) etc all Meter 75 105.00 7,875.00

SITC of Category 6A Cable, 4 Pair, S/FTP, PVC jacket (as per actual) etc

32 MR SITC of Various Cables, relay modules & connectors etc all complete Nos 12 19500.00 234,000.00

SITC of 16U, Equipment Rack, with Front & Side doors, 4 No Fan

Assembly, on Top of the Rack, 4 Caster wheels, 2 no Shelfs to mount the

equipments which are not rack mounted, 8X2, 5/6 Amp. Power Distribution

Unit, Cable Manager & Sufficient Rack hardwares etc all complete

SITC of Ultra Thin Retractable Touch Monitor Lifter With Screen, Material:

Full aluminum alloy, Monitor: 15.6 inch FHD Screen (16:9), Resolution

ratio: 1920x1080, Screen Brightness: 400 cd/m2, Contrast: 1500:1 Full

Angle Automatic Pitch Angle: 15 degree Manual Pitch Angle: 0-30 degree

Interface: HDMI+RS232 I/O+USB With Anti-Pinching Function etc all

SITC of Room booking system with remote and on-the-spot booking on an

interactive touch screen, 6-inch(4.3) interactive screen, full capacitive

touch screen interface, has 3 month of battery autonomy or better,

Resolution 1024 × 758 pixels.Viewing Angle 180°, connectivity 2.4 GHz Wi-

Fi (IEEE 802.11 b/g/n) standard, WPA2-PSK support, WPA2-EAP support

etc all complete

6 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-ACESS CONTROL

Description of Items

S No DSR/ MR Qty Unit Rate DSR Amount NDSR Amount

Supply, installation, testing and commissioning of Enterprise level Application including Time Attendance-Access Control, GUI, Antipass back, Reports

in Inbox, with Unlimited Users, Door Scheduling, Unlimited Client logins, Event Notification, POP ups, Mustur Points, Area Control, Time base access

and alerts. AI Dashboard for People Counting,, Occupancy Manager, Software should be VAPT approved and should provide per reader license,

Sofware should expandable and scalable and have capability in future integration of Elevator management, Template management and card priting

,Integrated credential issuance application inclusive of card template designing, card printing, finger print enrollment, key management, contactless

card reader/writer & contact card reader/writer, Software shall support Access IP and Interface Controllers & Card Readers, Biometric Readers &

Enrolment Devices, Card Printers, Card Encoding Devices, Smart Cards, Mobile/Digital Credentials, BLE/NFC based access readers,Flap Barrier,

Boom Barrier etc, §Software Login shall be secured by providing a strong password implementation policy, enforcing strong passwords with

minimum/maximum limits, use of upper-case & lower-case characters, and numeric, and special characters. It shall also support policy for password

expiry, portal lockout, audit trails, use of captcha etc.

Server Browser communication shall be secured using Hypertext Transfer Protocol using Secured Sockets Layer [HTTPS (SSL)].

Server Application Security shall be ensured by developing the software according to ISO 27001 Standards or Information Security & Management

Systems (ISMS). Further, it shall be certified for any Vulnerability Assessment & Penetration Testing (VAPT) by a recognized 3rd party testing

authority. GDPR, SOC1,SOC2 & ISO20018 compliant.

Access Controllers to server communication channels shall be secured using TLS or AES 256 Bit Encryption.

1 MR Access Controllers shall have IPV4/IPV6 (greater connection integrity and security), SNMPv3/ v2c, centralized biometric template management, 1.00 Nos 253153.00 253,153.00

Cryptographic module, like OpenSSL FIPS Object Module RE, Crypto memory chip for Biometric Templates, credential & user info, DIP Switch Toggle

sets 5 minutes to disable web page access, Strong Password Enforcement (8-64 characters), HTTPS secured web interface for configuration.

Access Controllers to Subordinate devices like door modules, Input & output modules shall be secured by using AES256-bit Encrypted RS485

Reader to Controllers/Door Module communication channel shall be secured using ODDP Secured Channel (SC) Communication.

Readers shall have Secured Elements & Cryptographic Operations for the protection of Card reader keys.

Card/Credential to Reader communication shall be on 13.56 Mhz Radio Frequency deployed with Symmetric Key Encrypted Data Transmission.

Card/Credentials shall have encryption key-based secured user memory access.as per specifications of this tender etc complete as required and

directions of Engineer-in- Charge.

Supply, Installation, Testing & Commissioning of Integrated Visitor Managment System a.Mandatory fields for visitor pass issue

b. Whether appointment is must for every visitor

c. Whether Access Card issue to visitor is compulsory

d. Whether visitor request to be approved by the group administrator

e. Whether Email based approval

f. Sending of Email/SMS to the approved visitor

g. Sending Email/SMS to the employee on visitor arrival

2 MR h. Pop up on Employee’s system on visitor arrival 1 Nos 347058.00 347,058.00

i. Banned visitor notification

j. Lapse Time (Time after which appointment will get expired)

k. Default Departure Hours (if some other time is not set)

l. Pre Appointment hours ( Time before the scheduled appointment during which pass can be generated) all complete as per tender specs.

Supply, Installation, Testing & Commissioning of CCTV Integration with Any Third Party Video or CCTV camera installed at premises. Event Based

recording etc. Pre and Post Event Video Recording, In case of emergency operator shall be able to see the video through access control server by

3 MR clicking agsinst the users. eveny based short clip shall be saved at ACS server for Audit and Investigation purpose. as per specifications of this tender RO Nos 381764.00 -

etc complete as required and directions of Engineer-in- Charge.

1 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-ACESS CONTROL

Description of Items

S No DSR/ MR Qty Unit Rate DSR Amount NDSR Amount

Supply, Installation, Testing & Commissioning of Access IP Controller with Enclosure and Power Supply: 2 Door 4 Reader with RS485 OSDP, Security

Features: Authorized IP address filtering, IP Client Proxy Host communications protected by TLS 1.2/1.1 or AES 256/128; Crypto memory chip, IO

Expansion connection protected by AES Capacity: Cards/Users : 240000 Offline Event Log: 5,0000 & Communications Built in TCP/IP, IPV4, IPV6,

RS-485, Inputs: Eight unsupervised/supervised, Two unsupervised dedicated for cabinet tamper and UPS fault monitoring, Outputs: Four relays,

Power : 12 to 24 Vdc 10 %, 500 mA maximum , Supports up to 520 inputs and 516 outputs, 16 card formats per active reader, 8 per offline reader,

Open Supervised Device Protocol (OSDP) and OSDP SC compliant, Anti-passback support, Area-based, reader-based, or time based

Nested area, hard, soft, or timed forgiveness, Encrypted database, Supports up to nineteen (19) digit card numbers, Intrusion Alarm Functions: Area

4 MR monitoring, Standard alarm masking , Fire Integration; open all doors from hardware itself, Temperature: 2 No. 201294.00 402,588.00

-55 to +85 °C, storage, 0 to +70 °C, operating, Humidity: 5 to 95 % RHNC, Micro USB Port, SD card upto 8 GB. Certifications:UL294 Recognized,

FCC Part 15 Class A, CE Compliant, RoHS, NIST Certified Encryption etc. as per specifications of this tender etc complete as required and directions

of Engineer-in- Charge.

Supply, Installation, Testing & Commissioning of contactless smart card reader(s). The Reader shall be designed to securely read, interpret, and

authenticate access control data from virtual and digital credentials as follows:

·13.56 MHz contactless smart cards (Mifare/Desfire)

·Dynamic & Classic QR codes

·PIN shall also be available as an option.

2.The contactless smart card reader shall provide customized security protection through the support of dynamic QR code credentials to enhance

security by eliminating the possibility of generating duplicate QR codes.

3.The contactless smart card reader shall facilitate QR code reading from any form factor like paper, PVC cards, and/or digital devices like

4.The contactless smart card reader shall be able to decode AES128bit encrypted dynamic QR code.

5.The contactless smart card reader shall have a capacitive touch PIN pad as an option.

6.The contactless smart card reader shall provide a typical read range for 13.56MHz cards up to 6cm.

7.The contactless smart card reader shall provide a typical QR code read range of 30cm to 150cm.

8.The contactless smart card reader shall enable QR code-based secure access with a mobile device by leveraging standard communication

technologies that work with both iOS® and Android™ operating systems.

9.The contactless smart card reader shall have a unique electronic serial number.

10.The contactless smart card reader shall be managed by the Reader Manager Mobile App.

11.The contactless smart card reader shall provide enhanced user feedback options through the use of clear and bright Red LED, Green LED, Buzzer -

Active Low (RGB).

12.The contactless smart card reader shall allow secure installation practices by providing the ability to transmit an alarm signal via integrated tamper

relay if an attempt is made to remove the reader from the wall, there shall be an output from a reader that is configurable with the access controller.

13.The contactless smart card reader shall enable ease of installation through identical wiring methods as legacy 13.56MHz readers.

14.The contactless smart card reader manufacturer shall provide a full product line of compatible products including readers, readers with integral

keypads, QR codes, and cards without the need for special programming.

Supply, Installation, Testing & Commissioning of Biometric Machine • user identification in 1 second minimum 500/1000 users and Expandanbe up to

10,000 users (30,000 templates) in 1:N identification mode, 2.8” QVGA color touchscreen and buzzer 250,000 IDs in authorized user list, 1 Million logs.

CPU: ARM® Cortex-A9 core 1GHz • Linux Operating System, Fake finger detection • Duress finger • FBI PIV IQS certified optical fingerprint senso. •

Network/Communication: - Ethernet, RS485, USB, Wiegand and OSDP support ,Integrated Smart Card Reader, Internal storage capacity: 512MB

6 MR Flash, 512MB RAM, Operating conditions: - Temperature: -20°C to 55°C (-4°F to 131°F) - Humidity: 10% to 80% (non condensing). • Ingress 1 No. 122494.00 122,494.00

protection: IP65 • EMC/Safety standards: - CE, CB, FCC, BIS - UL294 , RoHS, REACh and WEEE complete as per specifications of this tender etc

complete as required and directions of Engineer-in- Charge.

Supply, Installation, Testing & Commissioning of Smart card Frequency Excitation (13.56 MHz) Mifare smart Card , distance upto 2.5" Memory Type

7 MR EEPROM, 2K bit memory Complies with ISO/IEC standards for thickness. Lifetime Warranty .etc. as per specifications of this tender etc complete as 50 No. 452.00 22,600.00

required and directions of Engineer-in- Charge.

Supply, Installation, Testing & Commissioning of Press to Exit Push Button Stainless Steel Heavt duty Stainless Steel NO, NC based etc. as per

8 MR specifications of this tender etc complete as required and directions of Engineer-in- Charge. 3 No. 1388.00 4,164.00

Supply, Installation, Testing & Commissioning, Emergency Glass Break Unit Single Pole NO, NC Contact, etc. all complete as per specs

2 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES-ACESS CONTROL

Description of Items

S No DSR/ MR Qty Unit Rate DSR Amount NDSR Amount

Supply, Installation, Testing & Commissioning of Electro Magnetic Lock Single Leaf as per door design, Fail safe type, Holding force: 272kg (600lbs),

Inbuilt Door contact, Current Drain: 320mA/12VDC, Built-in voltage spiker suppressor to protect the lock body and equipments, lock body and

armature with chemical plating anticorrosion finished, With LED light & brackets UL Listed etc.as per specifications of this tender etc complete as

required and directions of Engineer-in-Charge.

Supply, Installation, Testing & Commissioning of 8 core 0.75 Sqmm Copper Flexible shielded RS485 OSDP communication multi-stand Data Cable

11 MR etc. all complete as per tender specs. as per specifications of this tender etc complete as required and directions of Engineer-in-Charge. 300 Metre 288.00 86,400.00

Supply, Installation, Testing & Commissioning of 4 core.75 Sqmm Copper Flexible shielded communication multi-stand Data Cable etc. as per

12 MR specifications of this tender etc complete as required and directions of Engineer-in- Charge. 300 Metre 182.00 54,600.00

Supply, Installation, Testing & Commissioning of 3 core 1.5 Shielded communication multi-stand Data Cable etc. as per specifications of this tender etc

13 MR complete as required and directions of Engineer-in- Charge. 100 Metre 147.00 14,700.00

Supply, Installation, Testing & Commissioning of Server i7-7700T 2.9GHz Processor. Turbo max to 3.8GHz • Support Intel vPro, AMT 11 remote

14 MR management • Support TPM 2.0 Function • up to 4 x 2.5" SATAIII Storages,as per specifications of this tender etc complete as required and directions 1 Nos 321800.00 321,800.00

of Engineer-in- Charge.

3 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - IT WORKS

Description of Items

S No DSR/ MR Unit Qty Rate DSR Amount NDSR Amount

Supply Installation Testing & Commissioning of Cat-6A

1 MR Mounting Cords 7 Feet for Data as per given Specification etc. Set 147 815.00 119,805.00

Supply Installation Testing & Commissioning of Cat-6 Mounting

2 MR Cords 4 Feet for Data Jack Panel end as per given Specification Set 147 651.00 95,697.00

etc. all complete

Supply Installation Testing & Commissioning of Cat-6, 24

3 MR Port Jack Panel for data as per given Specification etc. all Nos 7 25145.00 176,015.00

Supply Installation Testing & Commissioning of Cat-6 Mounting

4 MR Cords 4 Feet for Voice Jack Panel end as per given Specification Set 94 651.00 61,194.00

etc. all complete

Supply Installation Testing & Commissioning of Cat-6 24 Port

5 MR Jack Panel for Voice Field as per given Specification etc. all Nos 9 25145.00 226,305.00

Supply Installation Testing & Commissioning of 1 uPVC Cable

Manager as per given Specification etc. all complete

Supply Installation Testing & Commissioning of Mounting

7 MR Hardware pack of 10pcs as per given Specification etc. all Nos 8 445.00 3,560.00

Supply Installation Testing & Commissioning of 100 Pair MDF

8 MR Box with Mounting Frame as per given Specification etc. all Nos 4 14575.00 58,300.00

Supply Installation Testing & Commissioning of 10 Pair Krone

Module as per given Specification etc. all complete

Supply Installation Testing & Commissioning of 25 Pair Riser

cable as per given Specification etc. all complete

Supply Installation Testing & Commissioning of 42 U

11 MR 800mmX800mm Closed Network Rack with standard Nos 1 184860.00 184,860.00

accessories as per given Specification etc. all complete

Supply Installation Testing & Commissioning of 12 Socket

PDU as per given Specification etc. All complete

Supply Installation testing & Commissioning of 2 port faceplate

with Gang Box etc. all complete

Supply Installation Testing & Commissioning of UTP CAT-6

Cable in 305 Mtr. Roll as per specification etc. all complete

1 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - IT WORKS

Description of Items

S No DSR/ MR Unit Qty Rate DSR Amount NDSR Amount

Supply Installation Testing & Commissioning of UTP CAT-6

15 MR Information Outlet Red for Data as per specification etc. all Nos 150 757.00 113,550.00

Supply Installation Testing & Commissioning of UTP CAT-6

16 MR Information Outlet Yellow for Voice as per specification etc. all Nos 110 757.00 83,270.00

Supply Installation Testing & Commissioning of distribution

17 MR Layer-3 Switch as per the given Specification etc. all Nos 2 1054928.00 2,109,856.00

Supply Installation Testing & Commissioning of distribution

18 MR 24 port Switch as per the given Specification etc. all Nos 6 275115.00 1,650,690.00

Supply Installation Testing & Commissioning of N Series

19 MR Access point which can support the given Controller as per the Nos 10 79428.00 794,280.00

given Specification etc. all complete

Supply Installation Testing & Commissioning of Internet Firewall

20 MR 1 Gbps or higher and rest as per the given Specification etc. all Nos 1 1006428.00 1,006,428.00

Supply Installation Testing & Commissioning of Internet Router

21 MR which can support the Fiber Line as per the given Specification Nos 1 767900.00 767,900.00

Supply Installation Testing & Commissioning of Mail & Database

22 MR Server which can support the client data and Mail system as per Nos 1 807030.00 807,030.00

the given Specification etc. all complete

SITC of A4 Black and White Laserjet Printers, Perfect for

Business with feature of Print, copy, scan, Prints up to 42/40

ppm (LTR/A4), Apple AirPrint, Ethernet, Mopria, USB, Wi-Fi,

Bluetooth, Touchscreen etc all required

2 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - CCTV WORKS

S No DSR/ MR Description of Items Qtty Unit Rate DSR Amount NDSR Amount

SITC of 5MP IR Vandal Proof Dome Network Camera Lens Size: 3.0mm – 13.5mm motorized

vari-focal lens, Aperture F1.4 – F3.2, NDAA Compliance must approved, Security: SSL

Encryption, Multi-User Authority, IEEE802.1x, IP Filtering, HTTPS , IR Distance : 30M IR,

Memory Support : Micro SD 512 GB, Two-way Audio Communication supported, Audio

Compression Algorithm: ADPCM 16K, G.726, G.711 u-Law, G.711 a-Law DC12V/PoE, IP67 and

K10 rating, Image Sensor: 1/2.8” CMOS Maximum Resolution: 2592 x 1944, 11, Video

1280x720, 640x360, Video Compression : H.265, H.264, Dynamic Range: 120dB, True Day &

Night: Yes (ICR) MJPEG Scanning Mode: Progressive Scan COLOR : 0.15 lux @ F2.0 B/W : 0

lux (IR LED ON), Shutter Speed (Auto) 1/10000s~1s, True day/night, WDR 120db, 3D DNR,

1 MR HLC & BLC, Quadruple streams, Four Streams individually configurable, Privacy Masking: 8 38 Nos 59545.00 2,262,710.00

Zone, Camera shall confirm ONVIF Profile S, Smart codec by ROI, MTBF time 1,25,000 Hours

@40 degree (Report to be submitted), Inbuilt Analytics Motion Detection, Alarm in, Tampering

and Trip Zone, Shall provide Quadruple streams, Object , SSL Encryption, Multi-User Authority,

IEEE 802.1x, IP Filtering, HTTPS , Operating Temperature: -40°C ~ +55°C (-40°F ~ +131°F) ,

Operating Humidity: 0% to 90% non-condensing, Certification: BIS/UL, FCC, CE approval. MAC

Address: The MAC address of the proposed IP cameras must be registered in the same name of

the OEM. The IP Camera OEM must confirm that the MAC address of the surveillance cameras;

OUI must be in the name of the OEM. etc complete as per specifications of this and directions of

Engineer-in- Charge.

SITC of VMS Software System, VMS shall support upto 256 Channel or Camera Licesne . Per

Channel License cost shall applicable, VMS allows large surveillance solutions to be efficiently

managed should support minimum 4 monitors, support alarm screens, Support PTZ control,

playback, and VCA display support. Should support 36-channel synchronized playback, system

shall support automatic recognition of all servers connected to the network, System should have

Facility for maps for Camera plotting and ease of operation, The System shall support Devices

list, including NVRs, Camera etc., Keeping the configurations of all interconnected devices,

2 MR eMaps, video patterns, sequences, user profiles, and permissions, Shall support health monitor RO Nos 19411.00 -

with Log Reportingl. Should support FIPS/Certin certified government of India Lab approval for

OWASP Top 10, SHould support seemless integration with Analytic Cameras, mobile device

push notification, Time-lapse, Event log, Motion, Thumbnail, Text-in search options, Should

support Meta Data filtering in playback, Should support classification of Object detection like

Human, vehicle,Search by color,search by object and search by object and color both. etc

complete as per specifications of this and directions of Engineer-in- Charge.

1 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - CCTV WORKS

S No DSR/ MR Description of Items Qtty Unit Rate DSR Amount NDSR Amount

Supply, Installation, Testing & Commissioning of 64 Channel IP network video recording

capability Rack mount NVR with Redundant Power Supply and minimum 8 Slots, should support

H.264/H.265 compression, network incoming throughput of 850 Mbps and 12MP recording

resolution, time division multiplexing, real time recording of multiple cameras, storing digitized

and compressed images on internal hard disk drives for fast search and retrieval either locally at

the unit, or from a remote workstation using a Graphical User Interface (GUI), should allow all

connected cameras to be discovered and configured automatically, simultaneous live view,

record, play back, data transmission in real time, maximum throughput of 400 Mbps, UHD 1920

ips, support H.264/H.265 compression, 2X – 12X digital zoom in live view mode, 2X – 12X

digital zoom in playback mode, time lapse, event, time lapse + event, pre / post-event, panic

recording schedule, recording bitrate control mode: CBR and VBR, alarm, audio, motion, trip

zone, video loss, text-in, system event triggering, fan error, record failure, storage related alerts

3 MR and alarm in error, email, remote notification (call back) to remote work stations, mobile device 1 Nos 675529.00 675,529.00

push notification, Time-lapse, Event log, Motion, Thumbnail, Text-in search options, SSL,

Password encryption options, network keyboardfor controlling the NVR and PTZ, 1 Gigabit

Remote Client port, 4 Gigabit ports, ONVIF compliant , output interface 1 HDMI (up to 4K), 8

internal SATA ports (10TB per SATA) with recording capacity up to 80 TB or more , RAID

support as 1,5,10 - user may choose & configure as per security needs on internal SATA ,

redundant dual power supply as failover,2 x USB for backup /upgrade etc., complete as

required. The NVR should have internal Admin service, monitoring servics, Left object detection.

In addition the NVR should be compatible to AI cameras, ANPR cameras for future. The NVR

should also support Failover services in 10:1mode. Certification: BIS/UL, FCC, CE . etc

complete as per specifications of this and directions of Engineer-in- Charge.

Supply Installation Testing Commissioning of 6 TB HDD . as per specifications of this tender etc

4 MR complete as required and directions of Engineer-in- Charge. 3 Nos 33155.00 99,465.00

Supply Installation Testing Commissioning of LED Display 55" Smart LED TV 138 cm/ 55" colour

Ultra HD (4k), professional/commercial monitor having 24 X 7 operation, with USB Port 2, HDMI

Port 3, HDMI (ARC), 2 channels, 20 W Speaker output power, AC4 audio format, Stream content

5 MR from devices, Wifi facility, dolby digital plus surround sound technology i/c making connection, 1 Nos 159170.00 159,170.00

testing etc. complete as required. as per specifications of this tender etc complete as required

and directions of Engineer-in- Charge.

2 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES- EPABX

S No DSR/ MR Description of Items Qty Unit Rate

Supply Installation Testing & Commissioning

of 100% Non Blocking Fully Digital

Integrated Services Digital Network(ISDN)

Compatible Voice Over Internet

Telephone(VoIP) ready 19" Rack mountable

1 MR EPABX presently equiped with 04 ISDN PRI Nos 1 1634714.00 1,634,714.00

Trunk Lines (120 Channel) 16 Digital

Extension 100 Analogue Extension,

Expandable up to 400 Ports/Channels and

other as per the given Specification etc. all

SITC of Low end DIgital Key Phone 1x16

2 MR Display with 8 Programmable Dual Color Nos 2 39157.00 78,314.00

LED’s etc. all complete

SITC of IP Phone with Speaker, Small

3 MR Display etc. all complete Nos 90 18215.00 1,639,350.00

1 Digitally signed by RAJ PAL

SCHEDULE OF QUANTITIES - WHITE GOODS

S No DSR/ MR DESCRIPTION OF ITEMS Qty Unit Rate DSR Amount NDSR Amount

MICROWAVE OVEN : Providing and fixing Samsung Convection Microwave Oven MC32K7056CH - Type - Convection,

Capacity 32L (1.1 Cu.ft), Power Consumption (Microwave) 1400 W, Outside (WxHxD) - 523 x 309 x 486 mm - For Pantry

REFRIGERATOR : Providing and fixing Samsung Refrigerator RF65DG90BDSG - Net Total(Liter) 650 ℓ, Cooling Type -

2 MR Triple Cooling, Net Case Height with Hinge(m) 1.83 m ,Net Depth with Door Handle(cm) 72.3 cm, Net Weight(kg) 123 kg 1 Nos 286,681.00 286,681.00

Net Width(cm) 91.2 cm

REFRIGERTAOR : Providing and fixing Samsung Refrigerator RT39C5532S8 - Net Total(Liter) 363 ℓ, Net Width(cm) 67.5

cm, Net Case Height with Hinge(m) 1.71 m, Net Depth with Door Handle(cm) 66.8 cm, Net Weight(kg) 64 kg - For Pantry