Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.0 LAccepted-AOC 521 DR K L ACHAL VANSHI COLONY JAISALMER 345001 RAJ | JAISALMER | RAJASTHAN | 345001 | L1 | Accepted-AOC L1 | |
| 2 | L2₹35.9 L+₹49,743.68 (1.41%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹36.3 L+₹90,918.20 (2.57%)Rejected-Finance | L3 | Rejected-Finance Not being lowest |
Tender Value
₹38.1 L
EMD Value
₹76,200
Closing Date
7 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Army Jaisalmer
GE Army Jaisalmer - 345001
PROVN OF SINGLE LIVING ACCN AND OVERHEAD GUN REPAIR BAY WITH HARDSTANDING UNDER GE (A) JAISALMER
2022_MES_556012_1
8236/22-23/E8
Open Tender
Civil Works
Item Rate
180 days
Jaisalmer
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Army Jaisalmer
₹76,200
Yes
27 Feb 2023
4 Oct 2022
9 Nov 2022
4 Oct 2022
7 Nov 2022
24 Oct 2022
Amount
Surface excavation not exceeding 30cm and averaging 15 cm deep and getting out in hard/dense soil complete all as specified & directed by Engineer-in-charge.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out hard/dense soil all as specified & directed by Engineer-in-Charge.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out any type of soil all as specified & directed by Engineer-in-Charge.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ disintegrated rock all as specified & directed by Engineer-in-Charge.
Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and getting out in hard rock complete all as specified & directed by Engineer-in-Charge. Note (i) Hard rock obtained from excavation shall be stacked properly. Stacked hard rock shall be measured by deducting 50% quantity for voids for hard rock, remaining quantity will be considered of soft/disintegrated rock. (ii) Hard rock obtained shall be issued under Schedule of credit, which shall not be allowed for uses in work.
Removing excavated material soft/ disintegrated rock to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engineer-in-Charge.
Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge.
Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil all as specified & directed by Engineer-in-Charge.
Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soft/ disintegrated rock complete all as specified & directed by Engineer-in-Charge.
Removing excavated material/soils to a distance exc 250 m and n exc. 500 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge.
M&L for hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified & directed by Engineer-in-Charge.
M&L For Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed by the Engineer-in-Charge.
Form work to sides of concrete foundations, footings, base of columns, rafts and raft beams, sides and soffits (IF any) of foundation and plinth beams etc for rough finished flat surfaces all as specified & directed by Engineer-in-Charge.
M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete all as specified & directed by Engineer-in-charge.
M&L for precast cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in block masonry with solid blocks exceeding 10cm width and setting in cement mortar 1:6 complete all as specified and directed by the Engineer-in-Charge.
M&L for 75 mm thick plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring complete all as specified and directed by the Engineer-in-Charge.
M&L for 100 mm thick plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring complete all as specified and directed by the Engineer-in-Charge.
M&L for 75 mm thick PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight all as specified & directed by Engineer-in-Charge
M&L PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in coping etc and like, including weathering, slightly rounded or chamfered angles and throating as directed with and includings necessary form work complete all as specified and directed by Engineer-in-charge.
M&L for precast cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in landings, shelves, cover slabs (manholes etc) and similar articles with plain faces, set in cement mortar (1:4) with and including necessary form work complete all as specified & directed by Engineer-in-charge.
M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate for levelling course for consolidated thickness shall be varied from 25 to 85 mm as per the requirements complete all as specified & directed by Engineer-in-charge.
M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm bore pipe all as specified & directed by Engineer-in-charge.
M&L for 40 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in flooring finished even & smooth without using extra cement complete all as specified and directed by the Engineer-in-Charge.
M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) complete all as specified & directed by Engineer-in-charge.
Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses complete all as specified & directed by Engineer-in-charge.
M&L for jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted, set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6 complete complete all as specified and as directed by the Engineer-in-Charge.
M & L for Keyed pointing to rubble masonry uncoursed or brought up to courses in cement mortar 1:4 complete all as specified & directed by Engineer-in-charge.
M&L for roughly squared stone 5cm thick as in lintels n exc 3m in length, hammer dressed on face and soffits, hoisted, set and pointed in lime mortar 1:3 or cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge
M&L for 5cm sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete complete all as specified and as directed by the Engineer-in-Charge.
M&L, pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.
M&L,Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engineer-in-charge.
S & F, 35 mm thick second class hard wood factory made plain, framed, panelled shutters, with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and Style as per IS:1003 (Part-1), kiln seasoned and chemically pressure treated all as specified & directed by Engineer-in-charge.
S & F, 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified & directed by Engineer-in-charge.
S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profile with MS square tube, supplying and fixing in opening as per specifications complete all as specified and directed by Engineer-in-charge.
M & L for factory made solid PVC moulded door shutter , 28 to 30mm thick (stiles) wuth 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the foront face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing complete all as specified and directed by Engineer-in-charge.
S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified & directed by Engineer-in-charge.
S&F, 100mm size, butt hinges, medium weight, cold rolled mild steel including necessary welding if required all as specified & directed by Engineer-in-charge.
S&F 100mm long aluminium alloy hinges complete all as specified & directed by Engineer-in-charge.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified & directed by Engineer-in-charge.
S & F aluminium anodized tower bolt 150mm size complete all as specified & directed by Engineer-in-charge.
M&L for mild steel TMT bars 6mm to 8mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engineer-in-Charge.
M&L for mild steel deformed bars 8mm to 10mm dia cut to length, bent to shape required including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified & directed by Engineer-in-charge.
M&L mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates,Fe 410-W (Gde E-250) quality complete all as specified & directed by Engineer-in-charge.
S & F 300 mm, Mild Steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed by Engineer-in-charge.
S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drwn steel spring, fixed in floor complete all as specified & directed by Engineer-in-charge.
S&F framed work such as grills, gratings, etc with ends of bars shouldered and / or riverted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, raillings, frame work of water tanks and similar work confirming to Fe-290 grade E-165 complete all as specified & directed by Engineer-in-charge.
S&F Pressed steel frames for doors with one or more rebates of size 125x60 mm including necessary fixing lugs, hinges, lock strike plate, etc.,and including filling of pcc 1:2:4 type B-0 in pressed steel frame complete all as specified & directed by Engineer-in-charge.
Supply and fix Decorative Curtain Rails Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. (Pattern of Fixing bracket and stops as approved by Engr in charge)
S&F rolled mild steel joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated) conform to Fe 410-W (Gde E-250 quality-A) complete all as specified & directed by Engineer-in-charge.
S&F rolled mild steel roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beams, tee, angle, channel or flat sections) including distance pieces, cleat etc conforming to Fe-410-W Gde E-250 quality-A all as specified & directed by Engineer-in-charge.
M&L for providing water proofing treatment with APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric ( wt not less than 150gm/Sqm) applied on primed surface ( priming coat as per the directions of Manufacturer) by forced (torch) application with 10cm overlaps and finally coating the surface with bituminuous aluminum paint @ 100gm/Sqm complete all as specified & directed by Engineer-in-charge.
S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-charge.
S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed by Engineer-in-charge.
M&L for steel ventilator with top hung shutter incl hinges, steel peg stay complete all as specified and directed by Engineer-in-charge.
M&L for non skid ceramic coloured tiles of size 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-Charge.
S&F glazed ceramic coloured tiles of size 450mmx300mmx 7mm thick on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed by Engineer-in-charge.
M&L for non skid ceramic coloured tiles of 7 to 8mm thick, (square/rectangular) joint free area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including screed bed or bedding layer of 15mm thick in CM (1:6) complete all as specified & directed by Engineer-in-charge.
All as per item No 57.00 here-in-before but in skirting ver and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning complete all as specified & directed by Engineer-in-charge. Note :- (i) Pattern of interlocking tile to be rubber moulded or equivalent as approved by GE. (ii) Rate quoted by the contractor shall deemed inclusive of PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) packing and finished even and fair to the sides of pavement.
M&L for rendering 10 mm thick plaster in cement mortar (1:6) on fair faces of brick/ stone masonry surfaces of walls and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge.
M&L rendering 10mm thick in 1:4 cement plaster on fair faces of brick work or concrete surfaces is to be finished even and smooth (without using extra cement) complete all as specified and directed by the Engineer-in-Charge.
M&L for 10 mm thick, plaster in cement mortar (1:3) on concrete surfaces of ceiling and finishing the surface even and smooth without using extra cement all as specified & directed by Engineer-in-charge.
M&L for rendering 10 mm thick plaster in cement mortar (1:4) mixed with WPC on concrete surfaces of roof top and finishing the surface even and smooth without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid seperately as supply only).
Supply only integral water proofing compound all as specified & directed by Engineer-in-charge.
M&L for preparing new plastered or unplastered surfaces and apply three coats of white wash on ceiling all as specified & directed by Engineer-in-charge.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer all as specified & directed by Engineer-in-charge.
M&L for preparation of new plastered surfaces of walls and apply two coats of distempering oil emulsion over a coat of primer complete all as specified & directed by Engineer-in-charge.
M&L for preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red- oxide, zinc chrome primer complete all as specified and directed by Engineer-in-charge.
M&L for preparing new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified & directed by Engineer-in-charge.
S & F sheet glass 3mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-charge.
S&F, glavanised mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aparture 1.40 mm and fixed with tinned tack or galvanised wire stapples complete all as specified & directed by Engineer-in-charge.
S&F, 3mm thick, figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 sqm in each panes complete all as specified & directed by Engineer-in-charge.
S&F Glass dividing strips, 3 mm thick width of strip 38mm inserted in position, conforming to design complete all as specified & directed by Engr in Charge
S&F 20mm bore steel water tubing (ISI marked) medium grade galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.
S&F 15mm bore steel water tubing (ISI marked) medium grade galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed by Engineer-in-charge.
S&F bib taps cast copper alloy with crutch or butterfly handle , fancy type screwed down, screwed for iron pipe or for brass ferrule and fixed for 15 mm bore of pipe complete all as specified and directed by Engineer-in-charge. (cat part No Prayag-9206, Cera F 2006151, Jaquar CON-047 KN or equivalent in Appx Ç' list of makes)
S&F stop valves, cast copper alloy, CP, fancy type cromium plated with long shank , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 20 mm bore dia of pipe complete all as specified and directed by Engineer-in-charge.
S&F angle valves, cast copper alloy, CP, fancy type cromium plated with long shank and cup, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm bore dia of pipe complete all as specified and directed by Engineer-in-charge. (Cat Part No Prayag 9210, Jaquar CON 053 KN, Cera F 2006202 or equivalent in Appx 'C' list of makes)
S&F pillar taps fancy type, cast copper alloy with capstan heads chromium plated, screwed down high pressure, with or wirhout lettered Hot or Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to 15 mm bore of pipe complete all as specified and directed by Engineer-in-charge.
S&F 32mm High density polyethylene pipe (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engineer-in-charge.
S&F vitreous china squatting pan orissa pattern complete of size 580 x 440 mm white with integral foot rest incl P or S trap and making good to the floor complete all as specified and directed by Engineer-in-charge. (Cat Part No Cera S3010104, Hindware 20042 or equivalent in Appx 'C' list of makes).
S & F vitreous china wash down water closet pan (Pedestal pattern), white (EWC) with necessary P/S Trap and fixed in repairs including jet spray and seat cover complete all as specified and directed by Engineer-in-charge. (Cera Cat Part No-S1050104, hindware cat Part No-20011, or equivalent in Appx 'C' list of makes)
S&F 1000 litres capacity, three layered, white colour Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified & directed by Engineer-in-charge.
S & F 20mm bore dia ball brass valves high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified & directed by Engineer-in-charge.
S&F vitreous china wash hand basin, coloured, flat back, excluding pillar tap, waste pipe, and including cutting for and pinning in ends of brackets or erecting stand complete all as specified & directed by Engineer-in-charge. (Cat Part No Prayag 9250, Jaquar CON 167KNS, Cera F 2006461 or equivalent in Appx 'C' list of makes)
M & L for 10 ltr capacity valveless syphonic PVC flushing cistern with waste pipe fixed to wc etc complete all as specified & directed by Engineer-in-charge. (Cat Part No Jaquar WHC-WHT-1842, Cera B 1010102 or equivalent in Appx 'C' list of makes)
S & F 450 mm long PVC connection pipe of 15mm bore with PTMT nut at both ends complete all as specified & directed by Engineer-in-charge.
S&F Grating doom 100mm dia of PTMT (Minimum weight 25Gms) complete all as specified & directed by Engineer-in-charge.
S&F Single towel rail 600mm long complete all as specified & directed by Engineer-in-charge. (cat part No Jaquar ACN-111 NM, Prayag BA-20, Cera F 5003103 or equivalent in Appx 'C' list of makes)
S & F looking mirror 700x500mm, 5mm thick complete all as specified & directed by Engineer-in-charge. (Cat part No Prayag BLM-02, case No B3510112 or equivalent in Appx 'C' list of makes)
S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified & directed by Engineer-in-charge.
S & F Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified & directed by Engineer-in-charge. (Cat part No Prayag BS 73, case F 702010S or equivalent in Appx 'C' list of makes)
M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified & directed by Engineer-in-charge.
S&F vitreous china urinal flat back, white, with grating and union for discharge pipe (exclusive flushing cistern, flushing pipe, and waste pipe) including connections to flushing pipe and outpipes fixed complete all as specified & directed by Engineer-in-charge. (Cat part No. Jaquar URS-WHT-13261, Cera S 4020102, Hindware 60002 or equivalent in Appx 'C' list of makes)
M&L for 200mm bore reinforced concrete pipes , class NP-2 (ISI marked) laid and jointed complete with collars all as specified & directed by Engineer-in-charge.
M&L for 150mm dia SGSW drain pipes grade `A’ (ISI marked) laid in trenches and jointed in CM 1:1 and tested complete as directed by Engineer-in-Charge.
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls all as specified & directed by Engineer-in-charge.
S&F 110 mm dia PVC (SWR) vent cowl all as specified & directed by Engineer-in-charge.
Cutting is to existing manholes for new drains, for removing existing branch drain, making good to walling and rendering cutting out branch channel and making good benching (bore of pipe 150 mm) all as specified & directed by Engineer-in-charge.
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long and dia of neck 16 to 20cm but length of bolt exceeding 22.5cm and not exceeding 30cm long complete all as specified and directed by Engineer-in-charge.
M& L Point wiring with 1100 volts IS gradecolour coding PVC insulated FR-LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm with 3 mm thick phenolic laminated white sheet cover for mounting of Piano Type switches, sockets, fan regulators complete for the following :-
(a) One light point controlled by one switch.
(b) One fan point controlled by one switch.
(c) One socket outlet 6 amp controlled by one switch on the same board with other switches.
(d) One socket outlet 6 amp controlled by one switch on indepdendent board.
M& L Point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting for one 16 amp socket outlet modular type for controlled by one switch on independent board complete.
M& L Point wiring with 1100 volts grade PVC insulated FR-LSH multistranded copper conductor cable 4.00 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.00 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting for one 16 amp socket outlet modular type for controlled by one switch on independent board complete.
S&F switch piano flush button single pole one way 5/6 amp complete all as specified and directed by Engineer-in-charge.
S&F switch piano flush button single pole one way 16 amp complete all as specified and directed by Engineer-in-charge.
S&F socket outlet 2 in 1, 3 pin ,6 & 16 amp flush type complete all as specified and directed by Engineer-in-charge.
S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as specified and directed by Engineer-in-charge.
S&F ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified and directed by Engineer-in-charge.
Supply and fix energy saving, environment friendly & robust Highbay/Mediumbay roof truss light LED for covered shed 150 W IP65 luminaire with high efficacy with fixing arrangement such as bracket, MS clamp, Nut bolts etc and connecting including taking down existing light fittings of any desription complete all as specified and directed by Engineer-in-charge. Make : Havells Cat No. SAUCERPLUSHBP 150WLED85760DTOLTG or equivalent in Appx 'C' list of makes. (Note:- Fixing of light at any height arrangement of ladder should be provided by contractor).
S&F MCB distribution board TPN, 415 volts, 4 ways double door powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete all as specified and directed by Engineer-in-charge.
S & F for MCB DB SPN 8 way double door IP 43 complete prewired including Bus Bar etc suitable for operation on 240 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed by Engineer-in-charge.
Supply and fixing MCB's TPN 63 to 100 Amps, 415 Volts,10 kA rapturing capacity 'C' curve complete all as specified and directed by Engineer-in-charge.
S&F hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete all as specified and directed by Engineer-in-charge.
S&F angle holder, insulated polycabonate body with back plate complete all as specified and directed by Engineer-in-charge.
Supply and fixing of building security light fitting LED 30 Watt IP 66 IK 07 pressure dia cast aluminium housing with high efficient LED as lihjting souce and PC cover having TOP opening sepreate drive compartment with fixing arrangement such as GI pipe bracket ,MS clamp ,Nut bolts etc and connecting complete all as specified and directed by Engineer-in-charge. (Make Havells cat pot No .EDDURAPEARLSL30WLED757SASYTOPCMP or equivalent in Appx 'C'list of makes).
S & F surface and wall mounted LED tube light along with fixture , 4 ft, 20W, extruded aluminium housing provided for efficient heat disspation with polycarbonate ,operating voltage 240 V, 50HZ, AC supply and operating tempureture 0 to 50 C, power factor >0.9, lumen output > 2000 and provision of new 3 core multistanded copper conductor of size 23/0.193 from ceiling rose to fitting with white colour flexible pipe complete all as specified and directed by Engineer-in-charge.
Supply & Fix LED Bulb 9 Watt complete all as specified and directed by Engineer-in-charge.
S & F for MCB DB SPN 12 way double door IP 43 complete prewired including Bus Bar etc suitable for operation on 240 volt 50 Hz AC supply including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed by Engineer-in-charge.
Supply and fixing MCB's TPN 40 to 100 Amps, 415 Volts,10 kA rapturing capacity 'C' curve complete all as specified and directed by Engineer-in-charge.
Supply and fixing MCB's single pole and neutral 32 Amp, 240 Volts, 10 KA rapturing capacity 'C' curve complete all as specified and directed by Engineer-in-charge.
Supply and fixing MCB's single pole and neutral 40 to 63 Amps, 240 Volts,10 KA rapturing capacity 'C' curve complete all as specified and directed by Engineer-in-charge.
Supply and fixing MCB's single pole 6 Amps to 32 Amps, 240 Volts,10 KA rapturing capacity 'C' curve complete all as specified and directed by Engineer-in-charge.
S&F fans ceiling complete with electronic type regulator and accessories 230V,1200 mm sweep .Min air delivery 210 CFM with service value 6.00 BEE . 5 star rated with with brushless direct current motor (BLDC) necessary connecting cable recommended / provided by manufacturer complete.
Supply & fix exhaust fans AC single phase 230/240 V of size 300 mm sweep with louver in provision of existing wall complete all as specified and directed by Engineer-in-charge.
M & L for submain wiring with approved colour code/as per IS (Red,black & green for single phase) conduit circuit with two single core PVC insulated cable with multistranded copper conductor of nominal cross sectional area of 6.00 Sqmm (FRLS) in PVC conduit including one run of PVC insulated multistranded copper conductor nominal cross sectinal area of 6.00 Sqmm (FRLS) of continous earth wire green in colour complete all as specified and directed by Engr-In-Charge.(Note :- Two runsof 6.00 Sqmm cable & one run of 6.00 Sqmm cable and one run of PVC conduit shall be paid as one unit length)
M & L bore earthing not less than 250 mm dia 16 feet deep filled with black soil up to 7 feet from bottom complete with galvanized iron pipe 40 mm bore medium grade 3 meter long tapers at bottom & provided 12 mm holes (staggered) at 75 mm centre to centre up to 2.5 meter of length from bottom, burried directly in ground filled with 45 cm alternate layer of chemical magnisium sulphate, charcoal & salt up to ground levl connected to galvanized iron wire 4mm dia as earthing lead up to Panel /DB BOX as per site requirement by means of bolt and nut, check nuts and washer of galvanized iron or steel including brazing work and 40mm dia light grade pipe for earth lead protection including test point terminal cover the earhing hole by PCC chamber and GI cover and testing on completion complete all as specified and directed.
M&L for cutting existing GI tubing for alteration or additions of sizes including screwing existing GI tubing for tapping & making new connections etc of 20 mm bore complete all as specified & directed by Engr in Charge
S&F gun metel globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for the 20 mm bore sizes with ISI marked and as per IS 14846 all as specified and directed by the Engineer in Charge.
M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area size 35 Sqmm 3.5 Ccore complete all as specified and directed by Engineer-in-charge.
M&L for XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade 16 Sqmm 4 Core complete all as specified and directed by Engr-in-charge.
M&L for sand cushioning to under ground cable using tibba sand and gently punning to cushioning to cable complete all as directed by Enginner-in-charge . Note :- Punned thickness of sand cushioning only measured for the purpose of payment.
Supply & laying 40 to 50 mm thick roughly hammer dressed Jodhpur stone patti cable cover 25 cm to 30cm wide and n.exc 60 cm long each laid dry abutting with each other with maximum gap between adjustment slabs n. exc 10 mm complete all as specifeid & directed by Enginner-in-charge.
S&F steel water tubing light grade galvanised, 40mm bore (ISI Marked) laid in trenches, on pole for cable protection complete all as specified and directed by Engineer-in-charge.
M&L for road cutting for passing of HT/LT cable inside GI pipe of suitable size complete digging after laying of pipe line/ cable making good the surface complete all as specifeid & directed by Enginner-in-charge.
Bhawani Constructions
AMBEY MAA CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .