SPECIAL REPAIR TO ROAD CUM PATH WITH DRAIN FROM KHATIPURA ROAD TO JADUNATH VIHAR UNDER ZONE-I AREA AT JAIPUR MIL STN

Amount

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in cement mortar complete all as specified and directed.

M&L for soling (sub base) 100 mm thick spread thickness, with broken boulders or quarried stone , interstices filled, surface formed and rolled & consolidated to required gradient & camber with 8 to 12 tonne power roller complete all as specified complete all as specified and directed..

M&L for WMM, providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in subbase/base course on well prepared subbase and compacting with smooth wheel roller of 80KN to 100KN weight to achieve the desired density etc complete all as specified and directed.

M & L for Machine pressed precast concrete rubber mouded interlocking paver block of approved shape & size with grey cement and no pigments confirming to IS 15658 -2006 of 80mm thickness, M-40 Grade over and including 25mm thick sand cushioning over and including 100mm thick PCC 1:4:8 type D-2, (40 mm graded stone aggregate) complete all as specified and directed.

M&L for Precast block with PCC (1:3:6) type -C1 using 20 mm graded stone aggregate as in kerb stone complete all as specified and directed.

M&L forming embankments including raising or lowering earth , spreading in layers n.exc 30 cm thick, watering, ramming, rolling and finishing to required size etc, n. exc 1.5 mtr high from base complete all as specified and directed complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and n exc 1.5m in depth, for foundation, etc or for shaft , wells, cesspits, manholes, pier holes, etc n. exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft/ loose soil complete all as specified and directed.

Removing excavated material n.exc 50m & depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and directed.

M & L for plain Cement Concrete1:4:8 type D-2 (40mm graded aggregate) in sub base of floors complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

Taking down cement plaster from brick walls/ stone walls etc. of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on stone masonary surfaces , finished even and smooth without using extra cement complete all as specified complete all as specified and directed.

M&L for 15mm thick plaster in cement mortar (1:4) on Brick surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for 10 mm thick plaster in cement mortar (1:4) on contcrete / brick surfaces, finished even and fair without using extra cement complete all as specified.

M&L for precast RCC 1:2:4 type B-1, using 20mm graded stone aggregate for manhole cover including placing over manhole all as specified including demolition of old RCC manhole covers complete all as specified and directed.. Note :- Reinforcement shall be measured and paid separately.

M&L for RCC M-30 (Design Mix) using 20mm graded stone aggregates in foundations, including rafts, footings, foundation beam , plinth beams, bases of columns etc. Basement slabs , under reamed piles and mass concrete complete all as directed.

M&L cement concrete M-30 (design mix) using 20mm graded stone aggregate as in walls, retaining walls, basement walls, ballast walls, and the like any thickness above top of footing incluidng attached pillaster and buttresses complete all as specified and directed.

M&L for rough finish formwork to sides of concrete foundations, footings , bases of columns, raft and raft beams, sides and soffits of foundations and plinth beams and similar work: vertical or to better for rough finished flat surfaces of concrete complete all as specified and directed..

M&L form work (rough finished) to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttressess etc vertical or to batter complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in benching, kerbs, mud stop, rounded or chamfered on edges including form work complete all as specified complete all as specified and directed.

Providing cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in lintels upto 1.50m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parpets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering , slightly rounded or chamfered angles and throating including necessary form works etc.complete all as specified and directed.

M&L for Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections), including distance pieces, cleats etc conforming to Fe 410-W Gde E-250 quality A including fabrication, erraction and fixing complete all as specified.

S&F framed bracket of flat iron around manhole cover of any size, cut to shape welded, riveted etc complete all as specified

M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290(Gde E-165) complete all as specified and directed.

M&L for preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.

Schedule of Credit

Shiv Construction Company

JAGDAMBA CONSTRUCTION COMPANY

Sunrise Contractors