Certain Repair work of steel and wooden furniture including painting/polishing/re-canning of chairs at Mil Stn Kapurthala under GE Kapurthala.

Amount

Chair Verandah (Item No 01 to 03) Removing of old unsv PVC Bottom Seat from Chair Verandah and S & F of new PVC bottom seat of chair varandah complete all as specified and directed by Engr-in-Charge. FD/MAP-II/06

All as per Srl item No 1 above but back of seat of Chair Verandah. FD/MAP-II/06

M&L for painting of Chair Verandah with two coats of synthetic enamel paint including preparation of surfaces complete all as specified and directed by Engr-in-Charge. FD/MAP-II/06

Charpoy with hard top Item no 04 to 05) Removing of unsv plywood and supply & fixing New ply wood BWR commercial size 6'x3'x12mm thick to same plateform with nut and bolts of suitable size all as per specified and directed by Engr-in-Charge. FD/MAP-II/01

M&L for painting of Charpoy with hard Top and with two coats of synthetic enamel paint including preparation of surfaces complete all as specified and directed by Engr-in-Charge. FD/MAP-II/06

Chair Easy (Item No 06 to 12) Replacement of old unsv legs with new Shisham wood legs well seasoned free from shake and knots complete all as per drawing, as specified and directed. FD-229

All as per Srl item No 06 above but side/front/rear rails of cane seat with 3mm dia hole for Recanning. FD-229

All as per Srl item No 06 above but back bottom size - 480 x20 x100mm. FD-229

All as per Srl item No 06 here-in-before but stiffener of size 50 x 25 x 500mm. FD-/229

All as per Srl item No 06 here-in-before but arms of size as shown on drawing. FD-229

M&L for melamine polishing to chair easy complete all as per drawing and as specified and as directed by Engr-in-charge. FD-17/229

Re-canning of Chair Easy with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drawing complete all as specified and as directed by Engr-in-Charge. FD-17/229

Almirah Large Steel (Item No 13 to 17) Removing of old unsv shelves and S&F of new 1mm thick PGI Sheet shelves and fixing in position complete all as specified and directed. FD-1031

Removing of old unsv/broken legs and S&F new legs out of 1.00mm thick PGI sheet complete all as shown on drawing and complete all as specified and as directed by Engr-in-Charge. FD-1031

Removing of old unsv locks and S&F new locks to steel almirah large complete all as specified and as directed by Engr-in-charge. FD-1031 Make:Godrej/Harrison

All as per Srl item No 15 above but CP handle (as per existing size) FD-1031

M&L for painting of steel Almirah large with two coats of synthetic enamel paint in side and out side including preparation of surfaces complete all as specified and directed by Engr-in-Charge. FD-1031

Almirah Med/Small Steel (Item No 18 to 22) Removing of old unsv shelves and S&F of new 1.00 mm thick PGI Sheet shelves and fixing in position complete all as specified and directed by Engr-in-Charge. FD-1032

Removing of old unsv/broken legs and S&F new legs out of 1.00 mm thick PGI Sheet complete all as shown on drawing and as specified and as directed by Engr-in-charge. FD-1032

Removing of old unsv locks and S&F new locks to steel Almirah small FD-1032 Make:Godrej/Harrison

All as per Srl item No 20 above but CP Handle.

Material and labour for painting of steel Almirah small with two coats of synthetic enamel paint inside and outside including preparation of surfaces complete all as specified and directed by Engr-in-Charge. FD-1032.

Table 900X600X760 mm Steel with and Without Drawer (Item No 23 to 25) Removing of unsv top of the table and S&F new top of the table made out of 18mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging complete all as specified & directed by Engr-in-Charge. FD-1007/1008 Make: Century/Greenply/Action Tesa

M&L for painting of table with drawer with one coat of synthetic enamel paint OG over a coat of red oxide primer complete all as specified and directed. FD-1007/1008

All as per Srl items 24 above but table without drawer. FD-1007/1008

Chair CB Steel with Arms (Item No 26 to 29) Removing of old unsv bottom seat and S&F new seat of teak wood of adjusting size duly canned and polished including nuts and bolts complete all as specified and directed by Engr-in-Charge. FD-75(M)

All as per Srl item No 26 above but back of Seat. FD-75(M)

Removing of old unsv arms and S&F new arms rest of teak wood including polishing complete all as specified and directed. FD-75(M)

M & L for Painting of one coat of synthetic enamel paint OG to chair complete including preparation of surfaces complete all as specified and directed by Engr-in-Charge. FD-75(M)

Chair CB Steel without arms (Item No 30 to 32) Removing of old unsv bottom seat and S&F new seat of teak wood of adjusting size duly canned and polished including nuts and bolts, complete all as specified and directed by Engr-in-Charge. FD-75(M)

All as per Srl item No 30 as above but back of seat FD-75(M)

M & L for painting of one coat of synthetic enamel OG paint incl preparation of surfaces complete all as specified and directed by Engr-in-charge. FD-75(M)

Table Centre (Item No 33 to 37) Replacement of old unsv top and providing new top of 18/19mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging all round complete all as per drawing and as specified and directed by Engr-in-Charge. FD-274,235 Make: Century/Greenply/Action tesa

Replacement of old unsv legs with new Shisham wood leg well seasoned free from shakes and knots complete all as per drawing complete all as specified and as directed by Engr-in-Charge. FD-274,235

All as per Srl item No 34 above but long rail. FD-274,235

All as per Srl item No 34 above but short rail. FD-274,235

M&L for melamine polishing to table centre complete all as shown on drawing and complete all as specified and as directed by Engr-in-Charge. FD-274,235

Charpoy GI Pipe Removing of Old UNSV plywood from Charpoy GI Pipe and tightning of complete charpoy and S&F of New plywood (BWR) Commercial thick of size 2000mmx900mmx12mm thick fixed with 10 nos nut & bolts including washers (3 nos on long rail & 2 nos on short rail each) including S&F flat iron stiffeners/supports 3 nos made out of 40x4mm, 850mm long as directed by Engr-in-Charge. Note : Plywood shall be ISI marked and shall be make of Duraply/Kitply/Archid/Century/Greenply FD-220

Table Officer Steel (Item No 39 to 42) Removing of unsv top of the table and S&F new top of the table made out of 18mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging complete all as specified & directed by Engr-in-Charge. FD-1003 Make: Century/Greenply/Action Tesa

M&L for painting of table officer steel with one coat of synthetic enamel paint OG complete all as specified and directed by Engr-in-charge. FD-1003

S&F hard rubber shoe of best approved quality (as per existing size) complete all as specified and directed by Engr-in-charge. FD-1003

Removing of old unsv locks from drawer and S&F new locks to drawer of Table Offrs Steel. FD-1003 Make:Godrej/Harrison

Table Peg (Item No 43 to 47) Replacement of old unsv top by providing new top of 18/19mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging all round complete all as specified and directed by Engr-in-charge and as shown on drawing. FD-277/384

Replacement of old unsv legs with new Shisham wood legs well seasoned free from shakes and knots complete all as per drawing and as specified and directed by Engr-in-Charge. FD-277/384

All as per Srl item No 44 above but long rail. FD-277/384

All as per Srl item No 44 above but short rail.FD-277/384

M&L for melamine polishing to table peg complete all as shown on drawing and as specified and directed by Engr-in-Charge. FD-277/384

Table Dinning 6 Person (Item No 48 to 52) Replacement of old unsv top by providing new 18/19mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging around complete all as shown on drawing and as specified and directed by Engr-in-Charge. FD-273

Replacement of old unsv leg with new shisham wood leg well seasoned free from shake and knots complete as per drawing and as specified and directed by Engr-in-Charge. FD-273

All as per Srl item No 49 above but top long rail. FD-273

All as per Srl item No 49 above but top short rail. FD-273

M&L for malemine polishing of table dinning for 6 persons complete as shown on drawing and as specified and directed by Engr-in-Charge. FD-273

Chair Dinning (Item No 53 to 58) Removing of old unsv front leg and S & F new front leg made of 1st class hard wood (Shisham) duly smoothed, size and shape as shown on drawing and as specified and directed by Engr-in-Charge. FD-1105 & FD-279

All as per Srl item No 53 here in before but rear leg -ditto-FD-1105 & FD-279

All as per Srl item No 53 above but side /front /rear rails of cane seat with 3mm dia hole for re-canning FD-1105 & FD-228

All as per Srl item No 53 here-in-before but stiffener -ditto- FD-1105 & FD-279

M&L for malemine polishing of chair dinning complete all as per drawing and as specified and directed by Engr-in-Charge. FD-1105 & FD-279

Re canning of Chair Dining with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all-around border all as shown on drawing and as specified and directed by Engr-in-Charge. FD-1105 & FD-279

Chair Writing (Item no 59 to 65) Replacement of old unsv front leg by providing well seasoned Shisham wood duly smoothed, size and shape as shown on drawing and as specified and directed by Engr-in-Charge. FD-280/250

All as per Srl item No 59 above but rear leg. FD-280/250

All as per Srl item No 59 above but seat frame & S & F new seat frame bottom made of 1st class hard wood (Shisham) with 3mm dia hole for re-canning as shown on drawing and as specified and directed by Engr-in-Charge. FD-280/250

All as per Srl item No 59 here-in-before but stiffeners -ditto- FD-280/250

All as per Srl item No 59 here-in-before but arms. FD-280/250

M & L for malemine polishing of chair writing complete all as per drawing and as specified and directed by Engr-in-Charge. FD-280/250

Re canning of Chair Writing with half round plastic cane of 2 MM wide best Quality woven in Godrej pattern with 4mm wide plastic cane all around border all as shown on drawing and as specified and directed by Engr-in-Charge. FD-280/250

Table 900 X 600 X 760 mm with or without Drawer (Item No 66 to 72) Replacement of old unsv top by providing new 18/19mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging all round complete all as shown on drawing and as specified and directed by Engr-in-Charge. FD-223, 224

Replacement of old unsv leg with Shisham wood leg well seasoned free from shakes and knots all as per drawing and as specified and directed by Engr-in-Charge.FD-223, 224

All as per Srl item No 67 above but top long rail FD-223, 224

All as per Srl item No 67 above but top short rail. FD-223, 224

All as per Srl item No 67 above but stiffener. FD-223, 224

Replacement of old and broken drawers of table by providing new drawers complete all as per drawing and specified and as directed made out of 18/19mm thick pre-laminated particle board natural teak shade at the sides and the bottom of the drawers shall be of 6mm plywood commercial type complete duly fitted with fancy type approved knobs complete all as specified and as directed by Engr-in-Charge and as shown on drawing. FD-223, 224

M&L for melamine polishing to table 900X 600X760mm without or with drawer complete all as specified and directed by Engr-in-Charge and as shown on drawing. FD-223, 224

Bed Plywood Top (Item No 73 to 77) Removing of old unsv head board with legs and S&F new head board made of Shisham wood covered with plywood 4mm thick one side teak faced on front side and 6mm thick commercial plywood on back of head board and legs of Shisham wood, including polishing complete all as specified and directed by Engr-in-Charge and as shown on drawing. FD-246

All as per Srl item No 73 above but foot board FD-246

Removing of old unsv long rail and S&F new Shisham wood long rail of suitable size complete all as shown on drawing and as specified and as directed by Engr-in-Charge. FD-246

Removing of old unsv top and S&F new top of 12mm thick ply wood commercial with screws as directed by Engr-in-charge. Note : Plywood shall be ISI marked and shall be of Make - Duraply/Kitply/Century/Greenply/Archid.FD-246

M&L for melamine polishing to Bed plywood top complete all as specified and as directed by Engr-in-Charge and as shown on drawing. FD-246

Table Dinning JCOs/OR (Item No 78 to 82) Replacement of old unsv top by providing new 18/19mm thick pre-laminated Particle Board natural teak shade complete all as shown on drawing and as specified and directed by Engr-in-Charge. FD/MAP-II/03

Replacement of old unsv leg with Shisham wood leg well seasoned free from shakes and knots all as per drawing and as specified and directed by Engr-in-Charge. FD/MAP-II/03

All as per Srl item No 79 above but top long rail. FD/MAP-II/03

All as per Srl item No 79 above but top short rail. FD/MAP-II/03

M&L for melamine polishing to table dinning 6 person complete as shown on drawing and as specified and directed by Engr-in-Charge. FD/MAP-II/03

Teapoy (Item No 83 to 87) Replacement of old unsv top by providing new top of 18/19mm thick pre-laminated Particle Board natural teak shade including 3mm thick teak wood edging all-round and as specified and directed by Engr-in-Charge. FD-278

Replacement of old unsv legs with new Shisham wood legs duly smoothed, size and shape as shown on drawing and as specified and directed by Engr-in-Charge. FD-278

All as per Srl item No 84 above but long rail. FD-278

All as per Srl item No 84 above but short rail. FD-278

M&L for melamine polishing to table Teapoy complete all as shown on drawing and as specified and directed by Engr-in-Charge. FD-278

Table Office Clerk Steel (Item No 88 to 90) Removing of unsv top of table and S&F new top of the table made out of 18mm thick pre-laminated particle Board natural teak shade including 3mm thick teak wood edging complete all as specified & directed by Engr-in-Charge. FD-1004 Make: Century/Greenply/Action Tesa

Removing of old unsv locks from drawer and S&F new locks to drawer of Table Office Clerk Steel. FD-1004 Make:Godrej/Harrison

M&L for painting of table office clerk steel with one coat of synthetic enamel paint OG including preparation of surfaces complete all as specified and directed by Engr-in-Charge. FD-1004

S&F hard rubber shoe of best approved quality (as per existing size) specified and directed by Engr-in-Charge. FD-1004

Supply only cushion of foam size 500 x 525 x 100mm of density 32 to 40 complete all as specified and directed by Engr-in-Charge. Make Kurlon/sleep well or equivalent.

Supply of cushion cover size 525 x 575 x 100mm duly stitched from tapestry cloth, tapestry cloth should not be less than 135.00 per mtr of superior quality as approved by Garrison Engineer complete all as specified and as directed.

Desk with Seat 112cmx45cm (Branded) (Item No 94 to 96) Removing of old unsv top of desk and S & F of new top made of plywood commercial 18mm thick fixed with 1mm thick sunmica sheet natural teak shade including 3mm thick teak wood edging complete all as specified & directed by Engr-in-Charge.

All as per Srl item No 94 above but bottom seat of desk complete all as specified and as directed by Engr-in-Charge.

M&L for welding to Desk with Seat 112cmx45cm where required n.exc 2.5cm in length complete all as specified and directed by Engr-in-Charge.

Desk with Seat 96cmx45cm (Branded) (Item No 97 to 99) Removing of old unsv top of desk and S & F of new top made of plywood commercial 18mm thick fixed with 1mm thick sunmica sheet natural teak shade including 3mm thick teak wood edging complete all as specified & directed by Engr-in-Charge.

All as per Srl item No 97 above but bottom seat of desk complete all as specified and as directed by Engr-in-Charge.

M&L for welding to Desk with Seat 112cmx45cm where required n.exc 2.5cm in length complete all as specified and as directed by Engr-in-Charge.

BALWINDER SINGH AND SONS (BID ID -3159127)