Suplly of One Mobile Toilet...

NS Item -Supply of fiber toilet block (5 plus 5=10) seater rcgular as perspecification size of one toilet block 3™-07x2°-5`x6`-5`, toilettub non — corrosive and easy to clean S.S Tub. Made fromstructure 25x25x16 gauge Steel Sq pipe and M.s Angle made plateform fixed made from panelling 16 guage G.I sheet side plateform fixed on both side to toilet with side railing made from ISMC 75X40 and 25x3 M.S flat with side railing from M.S sq. Pipe of 40 mm and 20 mm . ladder portable type both side of toilet from M.S pipe , roof structure shall be fabricated by using M.S angle of size 40x40x6 mm and M.S tee of size 40x40x5 mm having round shape be projection and covered with transparent fiber glass sheet , sludge tank capacity 1000 ltrs. Made 2.5 mm galavainze sheet feeting with sludge drain valve 100 mm dia heavy duty butterfly valve at rear of the unit . flange system with leakful sealing is required for fixing the valve and flange should be fitted with tank .air vent pipe is provided to the sludge tank to eshaust foul gases . sludge tank shall have slope at rear and of about 3~ for easy drain . r tank capacity 1000 Itr. Trailer specification 150x75 ,125x65 and 75x40 M.S. Channel ( 4 wheel trailer chassis ) payload 3 Ton , road speed 32 km. Per hr. Tyre 4 nos. Size 7-30-16 , 02 nos axle size 70x70 mm sq. Fiber sheet fitted on top . disc type wheel 10 Nos. Extra Tap, Mirror, Mugetc. will be provided by Agency.

NS Item -SPECIFICATIONS OF GARBAGE RICKSHAW A. HEAVY DUTY FIVE BARS COLOURED REHRI 24` FRAME OF REPUTRD COMPANY NEELAM / ATLAS/HERO BRAND B. THE FRONT WHEEL (1 NOS.) RIM DIA 287, MINIMUM 40 SPOKES OF 10 GAUGE WITH TUBELESS TYRE OF APPROVED BRAND AND REAR WHEEL (TWO NOS) OF BRAND USED IN MOTOR CYCLE AS PER DIRECTIONS C. BODY SHOULD BE USED IN WOODEN FRAME SIZE 487X307X13` WITH SPOTS D. THE BODY PAINTED SINGLE COAT OF WOODEN PRIMER AND TWO COAT OF FIRST QUALITY SYNTHECTIC PAINT E. ALL METALIC SURFACE SHALL BE PAINTED ON BOTH SIDE F. HEAVY DUTY RIKSHAW / RERHI RIM SHOULD BE CHROME PAINTWITH SUPERIOR QUALITY HUBS AND SPOXES G. HEAVY DUTY BALL BERING OF ISI SPECIFICATION TO BE USED H. HEAVY DUTY RIM TO BE SUPPORTED BY ADDITIONAL 4 NOS M.S PLATE 30MM X 48 ANGLE TO FURTHER SUPPORT HEAVY LOAD I. HEAVY ANGLE 25X25X3 MM FIXED AT THE BACK TO SUPPOERT THE BODY J. IRON FLATE TO BE USED TO PROVIDE SUPPORT TO THE BODY IN THE MIDDLE K. PRINTING OF THE LOGO ON THE BOTH SIDE OF THE BODY OF THE RIKSHWA / RERHI