REPAIR TO FLOOR, INTERNAL WATER SUPPLY, PLINTH PROTECTION, PAVEMENT, PLASTER, SANITARY FITTINGS, WALL, COURT YARD, STAIR AND OTHER MISC B/R WORK OF UNRESTRICTED AND RESTRICTED AREA OF COD AND 506 ABW UNDER AGE B/R-II OF GE(EAST) JABALPUR

Amount

UNRESTRICTED AREA SCHEDULE

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Demolition of cement concrete un reinforced in ground floor and paving n. exc 15cm thick (below or above ground level) complete all as specified and directed.

Removing rubbish to a distance exc. 1.5 Km but not exc. 5.0 KM out side MD land complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceedeing 0.11 sqm but n.exc 0.18 sqm, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6).

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38sqm, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6).

Material and labour for Glazed ceramic tiles of size 350 x 250 x 7mm/ 450 x 350 x 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 all as specified.

Material and labour for Glazed ceramic tiles of size 300 x 600 mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 all as specified.

M&L for ENDURA out door tiles 30 cm x 30 cm x 10 mm thick rubberised mould set, jointed and pointed in neat cement slurry as in floors etc . (Make-H & R Johnson, Brand-Endura designer digital series) & Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying ceramic tiles/granite floor finishes.

M&L for ENDURA out door tiles 40 cm x 40 cm x 12 mm thick rubberised mould set, jointed and pointed in neat cement slurry as in floors etc . (Make-H & R Johnson, Brand-Endura designer digital series) & Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying ceramic tiles/granite floor finishes.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) dark shade/double charged/ultra charged polished, nano tech, area of each tiles exceeding 0.18 sqm, but n exc .38sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) & Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying ceramic tiles/granite floor finishes.

M & L Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms bedded and jointed with grey cement slurry and pointed to match the shade of granite stone including grinding and polishing types including screed bed 15 mm thick in CM 1:6.

S&F Marble tile (Makrana) 300 x 200 x 20mm thick machine cut , bedded jointed and pointed with grey cement slurry incl cutting and polishing laying over 15 mm thick CM 1:4 screed bed complete.

M& L Machine single pice cut kota stone slab flooring 18-20 mm thick in riser of steps skirting dado in pillar with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & 20 mm thick CM 1:6 screed bed complete.

M& L Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for rounding to edges of granite stone slabs one edge, such as in cooking platform, and other similar situations all as specified and as directed.

Machine cut Cudapph stone slab on cooking platform/shelf 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

M&L for colour rubber moulded Chequered cement concrete tiles 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors with white cement and pigments complete.

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast cement concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade.

M&L for Machine pressed precast cement concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes 25 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes 40 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. Note- Glass dividing strips shall be measured & paid separately as supply only.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in floor finishes 50 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. Note- Glass dividing strips shall be measured & paid separately as supply only.

M&L for PCC 1:3:6 type C-1 using 40 mm graded stone aggregate as in floor finishes 75 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in floor finishes 100 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D2 as in floors as sub base using extra cement in patches all as specified and directed by Engr-in-Charge.

M&L100 mm thick PCC 1:4:8 type type D2 as in floors as sub base in patches all as specified and directed by Engr-in-Charge.

S&F 28mm width Glass dividing strips, 3 mm thick.

M&L Hardcore of gauge n exc. 63 mm, broken stone deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.

M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed andsealed with sealing compound, Grade ‘A’.

Taking down existing loose plaster & Clean rusted reinforcement and exposed concrete surface by sandblasting .mechanical devices or any other estabilis-hed methods and follwing stage complete please. (a) Application of two coats of mineral based polymer modified corrosion inhibiting primer Colusal MK +Colusal 25. (b) Application of two component polymer based bond coat Zentrifix HB+Natufill BB2 or mortar low permeability or guinting with guniting aid. (c) Application Application of carbonation resistant, polymer modified reeady to ise fine mortar, Nafuquick +natufill BB2 or Zen-trifix F82+Nafufill BB2 Over the whole surface.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L FLY ASH Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L FLY ASH Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster and grit plaster any description on brick or stone walls,ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 10mm thick in CM 1:6 and to be finished even and smooth without using extra cement complete all as specified and directed.

Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and smooth without using extra cement complete all as specified and directed.

S&F 20 mm size of wire mesh netting of stainless stell wire 1.40 mm dia fixed with tinned tack of stainless steel wire staples all as specified and directed by Engr-in-Charge.

M&L 10mm thick plaster in CM 1:3 finished even & smooth without using extra cement in patches all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

M&L for preparation of new decorated surfaces of walls and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

M&L two coats of synthetic enamel painting over a coat of pink primer including preparation of new wooden surfacesof any description over 10 cm width or girth.

M&L for painting to new steel surfaces of any description, over 10cm width or girth with two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

S&F in repair 15mm bore Swan Tap Type Pillar Cock Single Tappillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge.

M&L for preparation of old decorated surfaces of wall and applying two coat pidilite product Dr Fixit Rain coat over one coat of primer seal complete as specified and directed.

M&L of old surface roof /terrace /ACC sheets/Manglore pattern exposed up to mother surface filled all cracks than applying three coat pidilite product Dr Fixit new over one coat primer seal complete as specified and directed.

Preparation of new decorated surfaces of walls and applying two coat of distempering with acrylic washable distemper oil emulsion white or tinted complete all as specified and directed.

Preparation of new plastered or un-plastered surface and applyingtwo coat of cement base paint on walls complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling and apply three coat of white wash complete all as specified and directed.

Preparation of old decorated surfaces of ceiling and applying one coat of plastic emulsion paint complete all as specified and directed.

Supply only Integral waterproofing compound completed all as specication as direction (ISI Mark).

Petty repairs to leaking water in bib taps, pillar taps stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed by Engr-in-Charge.

Petty reapirs to high / low level flusing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend incl replacing of rubber washer cheek uts plunges etc for any type of flush complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore bib tap chorime plate alloy with crutch or butterfly handels screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore PVC bib taps all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore pillar taps chorime plate alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge.

S&F in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-Charge.

S & F in repair Brass CP bath Mixer (2/3 hole) for mixing hot & Cold water arrangement, long shank suitable 15mm bore of pipe of approved quality screwed down for iron pipe and fixed.

S&F in repair 15mm bore stop valves chorime plate alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore stop valve/ angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore PVC stop valves all as specified and directed by Engr-in-Charge.

S&F in repair gun globe or gate valve for 20 mm bore pipe with iron wheel head, screwed both ends for iron pipe all as specified and directed by Engr-in-Charge.

All as per Srl item No 68 here-in-before but suitable for 25mm bore pipe all as specified and directed by Engr-in-Charge.

S&F in repair gun metal half turn flush cock for 32mm bore pipe with iron wheel head, screwed both ends for iron pipes all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore concussive push button type self closing tap of cast copper alloy chromium plated screwed iron pipes all as specified and directed by Engr-in-Charge.

S&F in repair self closing tap 15mm bore lift type of cast iron or malleable cast iron chromium plated screwed for pipes all as specified and directed by Engr-in-Charge.

S&F in repair PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20 mm bore pipes all as specified and directed by Engr-in-Charge.

All as per Srl item No 73 here-in-before but 25mm bore pipe all as specified and directed by Engr-in-Charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engr-in-Charge.

All as per Srl item No 75 here-in-before but length 600mm all as specified and directed by Engr-in-Charge.

S&F in repair 125 mm dia Brass chromium plated shower rose fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-Charge.

S&F in repair waste fitting brass chromium plated 32mm dia for wash hand basin all as specified and directed by Engr-in-Charge.

All as per Srl item No 78 here-in-before but 40mm dia for sinks all as specified and directed by Engr-in-Charge.

S&F in repair waste fitting suitable for stainless steel kitchen sink complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC low level flushing cistern complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-Charge.

S&F in repair 125mm/ 150mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6, all as specified and directed by Engr-in-Charge.

S&F in repair 127 x 127 Crokroch Trap chromium plated grating Make Prayag Cat FT-24 fixed on floor trap / nahni trap in Cement mortar 1:6, all as specified and directed by Engr-in-Charge.

S&F in repair 127 x 127 Crokroch Trap chromium plated grating Make Prayag Cat FT-28 fixed on floor trap / nahni trap in Cement mortar 1:6, all as specified and directed by Engr-in-Charge.

S&F in repair brass chromium plated bottle trap 32mm bore for wash hand basin with inlet & outlet screwed for pipes or connection incl necessary packing union and cap complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) withcast iron trap portion to match with the existing surface of floor all as specified and directed by Engr-in-Charge.

M&L Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern, flush pipe & Seat and cover for padestal complete all as specified and directed.

S&F repair plastic water closet seat, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-Charge.

S&F in repair Health faucet,( code ALD 573 of Jaquar).

S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets all as specified and directed by Engr-in-Charge.

S&F in repair chromium plated Single handle sink mixer cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-Charge.

Taking down steel tubing and connections incl cleaning for refixing or removal form site for 15mm bore pipe all as specified and directed by Engr-in-Charge.

All as per Srl item No 92 here-in-before but 20mm bore pipe all as specified and directed by Engr-in-Charge.

S&F 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-Charge. Make:- Jandal/ Prakash /TATA

All as per Srl item No 94 here-in-before but 20mm dia all as specified and directed by Engr-in-Charge.

S&F 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 with all fitting and fixed complete to walls, ceilings or in floors etc.

Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified.

S&F 20mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 with all fitting and fixed complete to walls, ceilings or in floors etc., any type of pipe.

Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified.

Refixing 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-Charge.

All as per Srl item No 100 here-in-before but 20mm dia all as specified and directed by Engr-in-Charge.

Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

All as per Srl item No 103 here-in-before but 75mm bore complete all as specified and directed.

All as per Srl item No 103 here-in-before but 40 mm bore complete all as specified and directed.

S&F 100mm dia Stack clampsout of 50 mmby 5 mm flat iron and 16 mm dia around iron stays including bolts and nuts and securing ends of stays to wall or roof making good all respect completed as directed as specified.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 40 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) branch pices (single Y) equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) branch pices (single Y) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 40 mm bore of pipe complete all as specified and directed.

M&L PVC (SWR) floor trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L PVC (SWR) mulit trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Dismantling water tanks capacity n. exc 250 Ltr and removing from site all as specified and directed by Engr-in-Charge.

Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from site all as specified and directed by Engr-in-Charge.

Dismantling water tanks capacity exc 500 Ltr and n exc 1000 Ltr and removing from site all as specified and directed by Engr-in-Charge.

S&F rotational molded polyethylene water storage tanks white tripple layer (cylindrical vertical with closed top) capacity 250 Ltr hoisted and fixed in position all as specified and directed by Engr-in-Charge.

All as per Srl item No 122 here-in-before but capacity 500 Ltr all as specified and directed by Engr-in-Charge.

All as per Srl item No 122 here-in-before but 1000 Litre Capacity.

S & F for WALL Mixer 3 in 1 system with provison in hand and head shower with 115 cm long band pipe connecting with lags and wall flange ( Cat No FLR -05281 N of Jaquar), fixed in repairs.

S & F for WALL Mixer 3 in 1 system with provison in hand and long band pipe connecting with lags and wall flange ( Cat No FLR -05273UPR of Jaquar), fixed in repairs.

S & F for Bib taps ( Cat No FLR -05047 N of Jaquar), 15 mm fancy type fixed in repairs.

S & F for Two in one Bib taps ( Cat No FLR -05041 N of Jaquar), 15 mm fancy type fixed in repairs.

S & F for concealed Stop valves, ( cat part No 8089 of Jaquar fixed, 15 mm fixed in repairs.

S & F for angle Stop valves, ( Cat No :-5053 N of Jaquar) fixed, 15 mm fixed in repairs.

S & F for Towel Ring of ( cat part No AON -7721 of Jaquar) fixed in repairs.

Towel Rack ( Cat Part No AQN 7781 of Jaquar) fixed in repairs.

S & F for Toilet paper holder ( cat part No AHS 1553 of Jaquar) fixed in repairs.

S & F for WC - wall hung ( code CNS - LYS-WHT-38951 of Jaquar), complete incl seat cover , fixing bolts etc fixed in repairs.

S & F for Single piece -WC ( code CNS - LYS-WHT-38851S of Jaquar), complete incl seat cover , fixing bolts etc fixed in repairs.

S & F for Flushing plates (make moon, code CIS - CHR - 31181910X of Jaquar) cistern and flushing pipe (exclu-sive of brackets), fixed in repairs.

S & F for Wash basins, under counter Basin ( code CNS-WHT-701), fixed in repairs.

S & F PVC laminate 4 mm thick decorative type for shelves / pelmet etc.

S & F PVC sheet for shelf 25 mm thick.

S&F in repair Looking Mirror with PVC moulding.

S&F in repair Shower OH, ( code OHS 1757 of Jaquar)

S&F in repair Bracket,( code SHA 555 of Jaquar)

S&F in repair Health faucet,( code ALD 573 of Jaquar)

S&F in repair Shower flex,( code ALD 573 of Jaquar)

S&F in repair Shower Arm,( code SHA 479L300 of Jaquar)

S&F in repair Hand Shower,( code HSH 49537 of Jaquar)

S&F in repair Corner Glass Shelves,( code CAN 1173 of Jaquar)

S&F in repair Tumbler holder,( code AQN 7741 of Jaquar)

S&F in repair Soap Dish,( codeAQN 7731 of Jaquar)

S&F in repair Flush Volve, ( code FLV 1015 of Jaquar)

S&F in repair Swivel Mirror, ( code CAN 1195 N of Jaquar)

S&F in repair Two way bib cock, ( code CQT 23041 of Jaquar)

S&F in repair Bath Tub Mixer, ( code CON 271 KN of Jaquar)

S&F in repair Sink Mixer, ( code CQT 23309 Jaquar)

S&F in repair Towel Rail, ( code AQN 7711 of Jaquar)

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair staniless steel sink 1mm thick without drainage board for kitchen with plug , waste pipe , washers, including cantilever cast iron brackets , connecting union to waste pipe etc, overall size 495x420mm with bowl size 410 x 330 x 160mm.

S&F, stainless steel plate rack, 0.56mm thick of standard pattern, 31”x36” size including fixing to wall with 4 Nos 50mm long screws & PVC rawl plugs complete all as specified.

S&F, in repair, HDPE water storage tank lid black (with arrangement for locking) for 500 litres capacity tank complete all as specified and directed.

S&F, in repair, HDPE water storage tank lid black (with arrangement for locking) for 1000 litres capacity tank complete all as specified and directed.

S&F, in repair, HDPE water storage tank lid black (with arrangement for locking for 5000 litres capacity tank complete all as specified and directed.

S&F, in repair, chromium plated glass shelf of size 22" complete all as specified and directed. As per Cat No AQN-7771 of Make Jaquar or equivalent Make as approved by GE from Appendix 'C'.

S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. As per Cat No. 554 of Make Prayag or equivalent Make as approved by GE from Appendix 'C'.

S&F in repair Double coat Hook, ( code AQN 7761 of Jaquar).

RESTRICTED AREA SCHEDULE

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level) (unreinforced).

M&L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection.

M&L 100mm thick PCC type B-2, (1:2:4) using 40mm graded stone aggregate Finished even & smooth without using extra cement.

M&L Granolithic concrete 1:1:2 floor topping 30mm thick; laid over PCC subfloors etc. & finished true and even & fair surface.

S&F Plastic dividing strips, 1.5mm thick & inserted in position to conform to design width of strip 38 mm.

M&L Wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors & pavings, & finished even & smooth (except metallic hardner) Thickness of topping 15 mm.

Supply only metalic floor hardener complete.

M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed andsealed with sealing compound, Grade ‘A’.

Dismantling floor, hearth or wall tiling in-cluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

Removing rubbish to a distance exc. 1.5 Km but not exc. 5.0 KM out side MD land complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceedeing 0.11 sqm but n.exc 0.18 sqm, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6).

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38sqm, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6).

Material and labour for Glazed ceramic tiles of size 350 x 250x 7mm/ 450 x 300 x 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 all as specified.

M&L for ENDURA out door tiles 30 cm x 30 cm x 10 mm thick rubberised mould set, jointed and pointed in neat cement slurry as in floors etc . (Make-H & R Johnson, Brand-Endura designer digital series) & Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying ceramic tiles/granite floor finishes.

M&L for ENDURA out door tiles 40 cm x 40 cm x 12 mm thick rubberised mould set, jointed and pointed in neat cement slurry as in floors etc . (Make-H & R Johnson, Brand-Endura designer digital series) & Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying ceramic tiles/granite floor finishes.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) dark shade/double charged/ultra charged polished, nano tech, area of each tiles exceeding 0.18 sqm, but n exc .38sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) & Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying ceramic tiles/granite floor finishes.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L FLY ASH Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L FLY ASH Brick work using old bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster and grit plaster any description on brick or stone walls,ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4and to be finished even and smooth without using extra cement complete all as specified and directed.

S&F 20 mm size of wire mesh netting of stainless stell wire 1.40 mm dia fixed with tinned tack of stainless steel wire staples all as specified and directed by Engr-in-Charge.

Supply only Integral waterproofing compound completed all as specication as direction (ISI Mark).

M&L 10mm thick plaster in CM 1:3 finished even & smooth w/o using extra cement in patches all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore bib tap chorime plate alloy with crutch or butterfly handels screwed down for iron pipes or for brass ferrule all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore bib tap fancy type chromium plated long body cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore PVC bib taps all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore pillar taps chorime plate alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge.

S&F in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed by Engr-in-Charge.

S & F in repair Brass CP bath Mixer (2/3 hole) for mixing hot & Cold water arrangement, long shank suitable 15mm bore of pipe of approved quality screwed down for iron pipe and fixed.

S&F in repair 15mm bore stop valves chorime plate alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore stop valve/ angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore PVC stop valves all as specified and directed by Engr-in-Charge.

S&F in repair gun globe or gate valve for 20 mm bore pipe with iron wheel head, screwed both ends for iron pipe all as specified and directed by Engr-in-Charge.

All as per Srl item No 201 here-in-before but suitable for 25mm bore pipe all as specified and directed by Engr-in-Charge.

S&F in repair gun metal half turn flush cock for 32mm bore pipe with iron wheel head, screwed both ends for iron pipes all as specified and directed by Engr-in-Charge.

S&F in repair 15mm bore concussive push button type self closing tap of cast copper alloy chromium plated screwed iron pipes all as specified and directed by Engr-in-Charge.

S&F in repair self closing tap 15mm bore lift type of cast iron or malleable cast iron chromium plated screwed for pipes all as specified and directed by Engr-in-Charge.

S&F in repair PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20 mm bore pipes all as specified and directed by Engr-in-Charge.

All as per Srl item No 206 here-in-before but 25mm bore pipe all as specified and directed by Engr-in-Charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engr-in-Charge.

All as per Srl item No 208 here-in-before but length 600mm all as specified and directed by Engr-in-Charge.

S&F in repair 125 mm dia Brass chromium plated shower rose fancy type fixed to 15mm bore pipe all as specified and directed by Engr-in-Carge.

S&F in repair waste fitting brass chromium plated 32mm dia for wash hand basin all as specified and directed by Engr-in-Charge.

All as per Srl item No 211 here-in-before but 40mm dia for sinks all as specified and directed by Engr-in-Charge.

S&F in repair waste fitting suitable for stainless steel kitchen sink complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC low level flushing cistern complete with siphon handle lever float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed by Engr-in-Charge.

S&F in repair 125mm/ 150mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6, all as specified and directed by Engr-in-Charge.

S&F in repair 127 x127 Crokroch Trap chromium plated grating Make Prayag Cat FT-24 fixed on floor trap / nahni trap in Cement mortar 1:6, all as specified and directed by Engr-in-Charge.

S&F in repair 127 x127 Crokroch Trap chromium plated grating Make Prayag Cat FT-28 fixed on floor trap / nahni trap in Cement mortar 1:6 , all as specified and directed by Engr-in-Charge.

S&F in repair brass chromium plated bottle trap 32mm bore for wash hand basin with inlet & outlet screwed for pipes or connection includig necessary packing union and cap complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) withcast iron trap portion to match with the existing surface of floor all as specified and directed by Engr-in-Charge.

M&L Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern, flush pipe & Seat and cover for padestal complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair staniless steel sink 1mm thick without drainage board for kitchen with plug , waste pipe , washers, including cantilever cast iron brackets , connecting union to waste pipe etc, overall size 495x420mm with bowl size 410 x 330 x 160mm.

S&F repair plastic water closet seat, white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-Charge.

Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

All as per Srl item No 225 here-in-before but 75mm bore complete all as specified and directed.

All as per Srl item No 225 here-in-before but 40 mm bore complete all as specified and directed.

S&F 100mm dia Stack clampsout of 50 mmby 5 mm flat iron and 16 mm dia around iron stays including bolts and nuts and securing ends of stays to wall or roof making good all respect completed as directed as specified.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 40 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) branch pices (single Y) equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) branch pices (single Y) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (double T) equal or un equal of 40 mm bore of pipe complete all as specified and directed.

M&L PVC (SWR) floor trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L PVC (SWR) mulit trap 75 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Taking down steel tubing and connections incl cleaning for refixing or removal form site for 15mm bore pipe all as specified and directed by Engr-in-Charge.

All as per Srl item No 241 here-in-before but 20mm bore pipe all as specified and directed by Engr-in-Charge.

S&F 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors of any length all as specified and directed by Engr-in-Charge. Make:- Jandal/ Prakash /TATA

S&F 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 with all fitting and fixed complete to walls, ceilings or in floors etc., any type of pipe.

Supplying and laying 16 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F 20mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 with all fitting and fixed complete to walls, ceilings or in floors etc., any type of pipe.

Supplying and laying 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

All as per Srl item No 247 here-in-before but 20mm dia all as specified and directed by Engr-in-Charge.

S&F 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 with all fitting and fixed complete to walls, ceilings or in floors etc., any type of pipe.

Dismantling water tanks capacity n. exc 250 Ltr Ltr and removing from site all as specified and directed by Engr-in-Charge.

Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from site all as specified and directed by Engr-in-Charge.

Dismantling water tanks capacity exc 500 Ltr and n exc 1000 Ltr and removing from site all as specified and directed by Engr-in-Charge.

S&F rotational molded polyethylene water storage tanks white tripple layer (cylindrical vertical with closed top) capacity 250 Ltr hoisted and fixed in position all as specified and directed by Engr-in-Charge.

All as per Srl item No 253 here-in-before but capacity 500 Ltr all as specified and directed by Engr-in-Charge.

All as per Srl item No 253 here-in-before but 1000 Litre Capacity.

M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

M&L for preparation of new decorated surfaces of walls and applying two coat of oil bound distemper over a coat of birla wall care putty complete all as specified and directed.

M & L two coats of synthetic enamel painting over a coat of pink primer including preparation of new wooden surfacesof any description over 10 cm width or girth.

M&L for painting to new steel surfaces of any description, over 10cm width or girth with two coats with synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

S&F in repair 15mm bore Swan Tap Type Pillar Cock Single Tappillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed Engr-in-Charge.

M&L for preparation of old decorated surfaces of wallhan applying two coat pidilite product Dr Fixit Rain coat over one coat of primer seal complete as specified and directed.

M&L of old surface roof /terrace /ACC sheets/Manglore pattern exposed up to mother surface filled all cracks than applying three coat pidilite product Dr Fixit new over one coat primer seal complete as specified and directed.

Preparation of new decorated surfaces of walls and applying two coat of distempering with acrylic washable distemper oil emulsion white or tinted complete all as specified and directed.

Preparation of new plastered or un-plastered surface and applyingtwo coat of cement base paint on walls complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling and apply three coat of white wash complete all as specified and directed.

Preparation of old decorated surfaces of ceiling and applying one coat of plastic emulsion paint complete all as specified and directed.

Schedule of credit amount of Rs. 78,553.00 to be deducted during AOC

GHANI CONSTRUCTION

TRISHLA CONSTRUCTIONS