Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹3 L+₹2,000 (0.67%)Admitted-Finance | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S JEHLUM BOREWELLS L1 | ZAKIR BOREWELLS L2 |
|---|---|---|---|---|---|
| 1.00 | Drilling of 125 mm diameter tube well by air rotary drilling rig unit suitable for lowering of MS casing of 125mm diameter in suitably drilled bore hole as per specifications laid down in IS 2800 (Part-I) with up to date amendments. The job is to be done in all kinds of soils, boulder, rocks, collapsible strata, saturated soils, artisan conditions by all available mechanical attachments (ODEX/DTH/Air Rotary) and exploration of ground water by tapping sufficient aquifer zones. The job includes the cost shifting of drilling accessories, tools, bits, casing shoe, consumables like fuel, lubricants, skilled and unskilled labours and other unforeseen items. Development of tube well with backwash method with air compressor of minimum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till well is thoroughly developed in all respects as per the directions of site engineer. | 60 | Mtr | 2,500 ₹1,50,000 Lowest | 2,700 ₹1,62,000 |
| 2.00 | P/F of MS 125mm dia pipe and subsequent lowering of casing assembly and its welding after every 10 feet, up to the drilled/desired depth. The casing is to be slotted as per the site requirement and as directed by site engineer. The specifications of the tube well shall be as under: as per IS 4270 : 2001 | 60 | Mtr | 2,000 ₹1,20,000 | 1,800 ₹1,08,000 Lowest |
| 3.00 | Supply, Installation, Testing and commissioning of INDIA Mark II hand pump assembly comprising of cylinder, head, handle assembly, front cover, handle, axle, washers, nuts/bolts. | 1 | No. | 5,000 ₹5,000 Lowest | 8,000 ₹8,000 |
| 4.00 | Providing / fitting of risers 32 mm dia GI pipe including sockets on one side of 3m length | 10 | Nos. | 1,500 ₹15,000 | 1,200 ₹12,000 Lowest |
| 5.00 | Providing / fitting of connecting rods of 10ft length each for INDIA mark II hand pump. | 10 | Nos. | 300 ₹3,000 Lowest | 400 ₹4,000 |
| 6.00 | Providing/Laying of Plain Cement Concrete block of size 4ft×4ft×1ft in 1:3:6 mix to give adequate strength to act as a sanitary block for the well and to grout the hand pump assembly in order to make it robust to resist shock load observed while pumping. The job includes Providing/laying of PCC edges of 4”×4” in 1:3:6 mix and P/L of cement plaster in 1:4 mix to the above block to give aesthetically good appearance. Cost on account of shuttering, strutting, centering, curing etc. is included in the scope of work.
In case the suitable space for the above specification is not available, the surface area is to be adjusted accordingly. | 1 | Job | 5,000 ₹5,000 Lowest | 6,000 ₹6,000 |
Tender Value
₹3.1 L
EMD Value
₹9,500
Closing Date
27 Oct 2025, 11:00 amClosed
Ex. Engineer JSD PHE GWD Srinagar
Ex. Engineer JSD PHE GWD Srinagar, Bagi Ali Mardan Khan Nowshera Srinagar
Installation of Tube Well Near Masjid Abu baker at Shupribagh Chaterhama district Srinagar.
2025_PHE_284009_4
e-NIT No 30 of 2025-26
Open Tender
Drilling Works
Item Rate
10 days
Masjid Abu baker at Shupribagh Chaterhama district
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Yes
Ex. Engineer JSD PHE GWD Srinagar
₹9,500
Yes
31 Oct 2025
13 Aug 2025
28 Oct 2025
13 Aug 2025
27 Oct 2025
13 Aug 2025
Amount
Drilling of 125 mm diameter tube well by air rotary drilling rig unit suitable for lowering of MS casing of 125mm diameter in suitably drilled bore hole as per specifications laid down in IS 2800 (Part-I) with up to date amendments. The job is to be done in all kinds of soils, boulder, rocks, collapsible strata, saturated soils, artisan conditions by all available mechanical attachments (ODEX/DTH/Air Rotary) and exploration of ground water by tapping sufficient aquifer zones. The job includes the cost shifting of drilling accessories, tools, bits, casing shoe, consumables like fuel, lubricants, skilled and unskilled labours and other unforeseen items. Development of tube well with backwash method with air compressor of minimum capacity 1000 CFM (300 PSI air delivery system) with suitable arrangements till well is thoroughly developed in all respects as per the directions of site engineer.
P/F of MS 125mm dia pipe and subsequent lowering of casing assembly and its welding after every 10 feet, up to the drilled/desired depth. The casing is to be slotted as per the site requirement and as directed by site engineer. The specifications of the tube well shall be as under: as per IS 4270 : 2001
Supply, Installation, Testing and commissioning of INDIA Mark II hand pump assembly comprising of cylinder, head, handle assembly, front cover, handle, axle, washers, nuts/bolts.
Providing / fitting of risers 32 mm dia GI pipe including sockets on one side of 3m length
Providing / fitting of connecting rods of 10ft length each for INDIA mark II hand pump.
Providing/Laying of Plain Cement Concrete block of size 4ft×4ft×1ft in 1:3:6 mix to give adequate strength to act as a sanitary block for the well and to grout the hand pump assembly in order to make it robust to resist shock load observed while pumping. The job includes Providing/laying of PCC edges of 4”×4” in 1:3:6 mix and P/L of cement plaster in 1:4 mix to the above block to give aesthetically good appearance. Cost on account of shuttering, strutting, centering, curing etc. is included in the scope of work. In case the suitable space for the above specification is not available, the surface area is to be adjusted accordingly.
ZAKIR BOREWELLS (BID ID -2475518)
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.31 MB
BOQ_874479.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .