SPECIAL REPAIRS TO SMQs AT AFS

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surface of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc and brushing neat cement slurry with 3kg of cement per sqm complete all as specified and directed.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick matt finish(square/ rectangular) area of ech tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screed bed 15 mm thick in CM (1:6) complete all as directed and specified.

M&L Glazed coloued Ceramic tiles of size 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over 10 mm thick rendering in CM 1:4 finished all as specified and directed in toilets and kitchen.

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles exc 0.11 sqm but not exceeding 0.18 Sqm as in flooring set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed all as specified.

M&L for Granite(of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over 20mm thick screed bed in CM 1:6 all as specified and directed.

Rounding to edges of granite slab such as cooking platform all as specified and directed.

Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L 75 mm thick cement concrete 1:2:4, type B2 using 40 mm graded aggregate for plinth protection all as specified and directed.

M&L for Forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’thickness of slab 100mm below.

Taking down cement plaster from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water, etc. walls of any description all as specified and directed.

Demolition of brick work or stone masonry built in CM incl all quoins all as specified

Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for brick work with sub class 'B' bricks , straight or curved on plan exc 6 m mean radius built in CM1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks , straight or curved on plan to any radius built in CM 1:4 as in half brick thick complete all as specified and directed.

M&L 10mm thick cement plaster in CM (1:6) on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls all as specified and directed.

M&L 15mm thick cement plaster in CM (1:4) on brick work or concrete surfaces rendering and finished even & smooth without using extra cement on external walls all as specified and directed.

M&L for Keyed pointing in Cement mortar 1:4 to random or polygonal rubble masonary all as specified and directed.

M&L for Preparing the new surfaces of wall and applying two coat of oil bond distemper over a coat of interior wall care putty 3mm thick all as specified and as directed

Preparation of newly plastered surfaces and applying two coats of cement base paint on walls including priming with alkali resistant priming paint etc complete all as specified and directed.

M&L for Complete removal of existing surface finish and applying two coat of OBD over a coat of 3mm thick wall care putty all as specified and directed

M&L preparation of old wall surface and applying two coat of White wash all as specified and directed.

M&L for Complete removal of existing surface finish and applying two coat of OBD over a coat of primer in ceiling all as specified and directed

M&L Preparing old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of Synthetic enamel Paint all as specified and directed.

M&L Preparing old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of Synthetic enamel paint all as specified and directed.

M&L for one coat of exterior paint to old decorated surfaces of wall ,floor, interlocking & chequered tile or including preparation of surfaces complete all as specified and directed.

Taking up or down 15mm steel tubing and connections all as specified and directed.

Taking up or down 20mm steel tubing and connections all as specified and directed.

S&F 20 mm dia of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified.

Taking up or down 25mm bore steel tubing and connections all as specified and directed.

S&F CPVC pipes 25 mm dia SDR 11 & plain CPVC SDR 11 fittings on walls, ceiling or laying including fitting in floors all as specified and as directed.

S&F in repair gun metal globe with iron wheel head, secrwed both ends for iron pipes gate valve 20 mm bore all as specified and directed.

S&F in repair gun metal globe with iron wheel head, secrwed both ends for iron pipes gate valve 25 mm bore all as specified and directed.

S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm white with integral foot rests including provision of lime concrete complete all as specified & directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed. Make : Cera/ Parryware/Neycer

S&F plastic pedestal pattern seat cover black closed pattern with flat bottom and cover and MS chormium plated hinging device all as specified and directed. Make : Cera/Parryware/Neycer

S&F in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern white with inlet, ball valve,float and handle including brackets including all fittings, flushing pipe fixed in repair all as specified and as directed.Make : Cera/Parryware/Neycer

S&F in repairs vitreous china wash basin, white or coloured flat back, size 550 x 400 mm including brackets all as specified and as directed .Make : Cera/Parryware/Neycer

S & F in repair Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” with long screwed shanks and fly nuts ,screwed for iron pipe and fixed completed all as specified.Make : Cera/Parryware/Neycer

S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed down screwed for screwed down high pressure with crutch or butterfly handle ,screwed both ends for iron pipe or for unions complete all as specified. Make : Cera/Jaguar/Ess Ess.

S&F in repair 15mm dia, concealed type chromium plated fancy type with long shank and cup screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.Make : Cera/Jaguar/Ess Ess.

S&F in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed. Cera Model F3002152

S&F in repair 15mm dia angle valves, cast copper alloy, CP, screwed down, high pressure, with crutch, screwed both ends for iron pipe or for unions and fixed in repair all as specified and directed.

S&F in repair Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm all as specified and directed. Make : Nirali/ diamond/Blue star

S&F in repair sink cock fancy type complete all as specified and (table mounted) with 215 mm swivel spout complete all as specified and as directed. Make - Cera F2003302)

S&F Towel rack with lower hanger (stainless steel), fixed with screws , complete all as specified and directed. Make : Jaguar ( Code No AHS-1581H).

Supply and fix PVC Cabinet mirror all as specified .(Make Prayag or equivalent).

S& F in repair Brass chromium plated shower rose 125mm with or without swivel joints any size, including fixing to steel pipe or union of 15mm bore all as specified and directed at site.Make : Cera/Jaguar/Ess Ess.

S & F in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange as specified and as directed.Make : Cera/Jaguar/Ess Ess.

Supply and Fixing in repairs PVC connection 15mm size with PTMT nut of length 600mm etc complete all as specified and as directed .

Supply and fixi of 32/40mm waste pipe for wash hand basin and sink all as specified and as directed

S&Fin repair PTMT (Minium weight 190grms) towel rail 600 mm long fixed with and including chromium plated brass screws and wooden /plastic cleats fixed in repairs.Make : Cera/Jaguar/Ess Ess

S & F corner glass shelf with assembly of CP and fixed with Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.Make : Cera/Jaguar/Ess Ess

S & F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats, as specified and as directed.(Minium weight 105 grms).

S & F CP Towel ring of fixed with and including Chromium plated brass screws and wooden/plastic cleats, as specified and as directed. Make : Cera/Jaguar/Ess Ess

S&F stainless steel Soap dish fix to wall all as directed and specified.Make : Cera/Jaguar/Ess Ess

S&F Corner glass shelf large, 300x300mm of cera all as specified and directed.

S&F glass shelf of size 12 cm wide x 60cm long for wash hand basin of cera all as specified.

S&F in repair brass CP Health faucet with 1.20m long flexible pipe and wall hook complete all as specified and directed.Make : Cera/Jaguar/Ess Ess

S&F Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr complete all as specified and directed . ( Make :NIRALI,Blue star,Nilkhant)

S&F PVC floor trap 75mm dia,plain with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed

S&F PVC(SWR) Pipes 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S & F PVC (SWR) bends 110 mm dia in any radius with access door etc all as specified and directed

PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints, laid in trenches or in floors and walls all as specified and directed

S & F PVC (SWR) bends 75 mm dia in any radius with access etc all as specified and directed

S & F PVC (SWR) 75mm dia junction (single 'T') equal or unequal with access door etc all as specified and directed

S&F CP grating size 100mm fixed with white cement all as specified.

S&F in repair rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 ltr capacity hoisted and fixed in position all as specified in SSR Pt - I including dismantling old tank and removing to store all as specified and directed

S&F in repair 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass in repair all as specified and directed

S&F in repair PTMT nipple 25 mm suitable for HDPE water tank all as specified and directed. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) .

S&F in repair PTMT nipple 20 mm suitable for HDPE water tank all as specified and directed. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms).

Taking down chowkats or frames with shutter not exceeding 1.5 sqm (without taking off shutters from the frame) of any description all as specified and directed

All as per item No74 above but exceeding 1.5 sqm but not exceeding 4 sqm

M&L for taking down shuttes of any description exc 1 Sqm and n.exc 2 Sqm,in cupboard shutters all as specified and directed.

M&L for taking down shuttes of any description exc 2sqm each and refixing in the same opening all as specified and directed.

S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

Cutting holes in brick walls built in CM for inserting hold fasts and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 1 ) using 12.5 mm graded aggregate ¸depth of embedded portion of hold fast not exceeding half brick all as specified and directed

M&L Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing edges will be painted to match with prelam sheet all as specified and directed.

M&L Factory Made Solid PVC Moulded door shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick moulded pre-laminated PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed.

S&F powder coated anodised aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed.

S&F Powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21,100mm long (2 No.) suitable handle (1No.) complete all as specified.

S& F flush door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed. (Make:- MAXON,)

S& F fly proof door 30mm thick membrane doors decorative finish on one side duly finished and polished and other side all as per manufacturers directions as per tint / colour including necessary teak wood lippings of necessary all as directed.(Make: MAXON)

S&F 35mm thick second class hard wood glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers.edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats all as specified and directed

S&F for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed

S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed.

S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp and staple (bolt type) and fixing clips of sheets , cast or extraded sections and fixing bolt and sliding bolts of extracted sections all as specified and directed

S&F for aluminium anodised, barrel tower bolt 150mm of extruded section all as specified and directed

S&F for aluminium handle 150mm cast type anodised all as specified and directed

Supply and fix floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate all as specified and directed

S&F brass 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F in repair pre-laminated particle board,19 mm thick interior grade,pre-laminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work all as specified and directed

S&F Continuous(piano) hinges,brass, bright finish of electro-galvanised 40 mm width of flap all as specified and directed

Cover fillets of standard 6 mm thickness hard board, 40mm wide,and fixing with screws all as specified and directed

M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed

S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane fixed with aluminium window and ventilator all as directed.

S&F figured glass pin head ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane fixed with aluminium window and ventilator all as directed. figured glass pin head type.

S&F sheet glass ordinary quality 4mm thick as in doors,window, showcase in aluminium frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprime gasket all as directed by Engineer-in-Charge

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm and fixed with stainless steel wire staples all as specified and directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.

M&L Preparing new steel surfaces of any description over 10cm in width or girth , not otherwise described and applying two coats of Synthetic enamel paint over a coat of red oxide primer all as specified and directed.

S& F for aluminium powder coated drapery rod 32mm dia including suitable fancy type suitable brackets on both ends fixed over 1st class hard wood rounded wooden blocks of 65mm dia and 20mm thick fixed to stone wall/ brick wall using screws incl necesary drilling & finished with polishing each opening shall have two fillets at both ends all as specified and directed.

S& F aluminium powder coated fancy type suitable brackets fixed at both ends of openings fixed over 1st class hard wood rounded wooden blocks 0f 65mm dia and 20mm thick fixed to stone wall/ brick wall using screws incl necesary drilling & finished with polishing each opening shall have two fillets at both ends all as specified and directed.

M&L for 20 mm thick Plastic kitchen cabinet with all accessories including handle, piano hinges,magnet catcher telescopic channel etc Including 6mm thick plastic sheet back side of the kitchen cabinet of Make :Sintex or Equivalent all as specified and directed.

S&F SS Bucket 48 cm x 50 cm x 10 cm all as specified and directed.

S&F SS Bucket 48 cm x 50 cm x 15 cm all as specified and directed.

S&F SS Bucket 48 cm x 50 cm x 20cm all as specified and directed.

M & L for Removing the existing unserviceable tar felt or any type of felt of any description from roof slab alongwith screed bed, including cleaning the surface & removing the debris to a distance exc 250m and n.exc 500m, etc complete all as specified & directed.

Material and labour for rendering 15mm thick (average) in cement mortar 1:4 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and fair without using extra cement. Note:- supply only of water proofing compound will be measured and paid seperately under relevant item

Supply only approved liquid water proofing compound all as specified and directed. Make : conplast x 421 IC of M/s Foroc Chemical (Inida) Ltd or its equivalent of make Dr Fixit/ STP Ltd.

M&L Applying oil bounded bitumen primer @ 0.20 Kg/Sqm, and providing 4mm thick APP modified water proofing membrane weighing not less then 4.0 Kg/Sqm, reinforced with non woven polyester matt weighing not less then 160 gm/sqm having softening point not less then 150 degree centigrade, having tensile strength of 650 N/5 cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforcement, trearing strength of 180 N by torch- on application including min 10cm side over lap & 15 cm end laps. Applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg/sqm as per the detailed specifications. Note : The laying/ applying of APP membrane and other connected work shall be carried out by the approved applicator of the manufacturing company of APP membrane all as specified and directed.

Supply and fix polished Sadarahalli granite slab flooring 20 to 22 mm thick with grey cement slurry mixed with pigment to match the shade of the slab including 20mm thick screed bed in cement mortar 1:4 complete on staicase complete all as specified and as directed.

Supply and fix 20 to 22mm thick polished sadarahalli granite tiles as in riser and dado of steps over 10mm thick cement mortar 1:4 complete all as specified and as directed.

Taking down the unserviceable point wiring (light, fan,socket or power) complete with fittings such as switches, sockets, ceiling roses, pendent regulators, sockets etc any light points and making good distrubed surfaces of walls and floors etc.

Taking down unserviceble DBs, with MCBs and Main switches.

Taking down ceiling fan, dismantling blades and removing fan and refixing ceiling fan after completion of re-wiring,and connecting up including provision of cable from ceiling rose or connector to fan all as directed.

Taking down Exhaust fan, dismantling blades and removing fan and refixing Exhaust fan after completion of re-wiring,and connecting up including provision of cable from ceiling rose or connector to fan all as directed.

M & L Painting of taking down ceiling and exhaust fans complete, in site with synthetic enamel paint by spraying including filling caviteis with filler, one coat after cleaning all dust etc all as directed.

M&L for point wiring complete with 1.5 sqmm (nominal cross sectional area) single core PVC insulated heavy duty ISI Marked FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including non metallic rigid PVC white conduit not less than 20mm dia and conduit accessories fixed to wall/floor/ceiling etc and provision of PVC insulated heavy duty ISI marked unsheathed copper conductor, 1.5 sqmm for earth continuity conductor and connected to common earth dolly including suitable size of sheet metal box 1.5mm thick fixed and flushed inside the walls, with 3mm thick laminated sheet top cover for housing switches, socket outlets etc., complete all as specified and as directed by Engineer-in-Charge for the one light point controlled by one 5 Amps switch.

All as per item No 121 above but one ceiling fan/Exhaust fan controlled by one 5 Amps switch

All as per item No 121 above but one socket 5 amp on independent board.

All as per item No 121 above but one socket 5 amp on Same Board with other switches.

All as per item No 121 above but one Bell Point controlled by one Bell Push

M&L for point wiring complete with 2.5 sqmm (nominal cross sectional area) single core PVC insulated heavy duty ISI marked FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including non metallic rigid PVC white conduit not less than 20mm dia and conduit accessories fixed to wall/floor/ceiling etc and provision of PVC insulated heavy duty ISI marked unsheathed copper conductor 2.5 sqmm for earth continuity conductor and connected to common earth dolly including suitable size of sheet metal box 1.6mm thick fixed and flushed inside the walls, with 3mm thick laminated sheet top cover for housing switches, socket, outlets etc., complete all as specified and as directed by Engineer-in-Charge".

Supply and fix switch piano 5 Amps flush type one way all as specified and directed.

Supply and fix socket outlet 3 pin 5 Amps flush type all as specified and directed.

Supply and fix switch socket combination 2 in 1, 5 Amps flush type all as specified and directed.

Supply and fix switch socket combination 5/15 Amps multi pin flush type all as specified and directed.

S&F ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI marked complete all as specified and directed.

Supply and fix Modular Bell push 6A 1 module type, 230 volts, ISI marked complete all as specified and directed.

Supply and fix Bell ding dong AC 230 V complete all as specified and as directed.

Supply and fix fan speed regulator, electronic step type, suitable for single phase AC, 240 volts, 50 Hz, 100 watts all as specified and as directed. Make - CONA/RIDER/ANCHOR

Supply and fixing LED, Tube light fitting 20 W, 6500K trim neo LED polycarbonate batten with Decorative ultra slim linear LED lighting fixture with extruded polycarbonate surface mounted high Efficiency PMMA diffuser soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor, flexible wire from ceiling rose to light fitting and two round block for mounting tubelight fittings including dismantling old unsv fitting all as specified and directed. Make : Wipro Cat No: LL20-221-XXX-65NE3 or Equivalent in Philips/Ledvance/ Havells/Crompton.

Supply and fixing LED, Tube light fitting 10 W, 6500K trim neo LED polycarbonate batten, with Decorative ultra slim linear LED lighting fixture with extruded polycarbonate body surface mounted high Efficiency PMMA diffuser soft glare free light complete accessories prewired and including provision of three core textile braided copper conductor flexible wire from ceiling rose to light fitting and two round block for mounting tubelight fittings including dismantling old unsv fitting all as specified and directed. Make : Wipro Cat No: LL20-111-XXX-65NE3 or Equivalent in Philips/Ledvance/ Havells/Crompton.

Supply and fix 10W LED, 5700K, 230 V integrated LED Bulk head luminaire fitting of pressure die cast housing with Control driver with efficiency 90 %, Acrylic diffuser & frame with IP 65 protection,including dismantling old unsv fittings all as specified and directed by Engr-in-Charge. Make Wipro model: LW07-141-XXX-57-XX or Equivalent in Philips/Ledvance/ Havells/Crompton.

Supply and fixing LED 14 Watts 230 V, with Control driver with efficiency 90 % ,attractive type sleek LED mirror light 2 feet fitting with high output diffuser prewired inluding all accessories and connecting up with twin core twisted copper conductor with suitable size and two round block for mounting tubelight fittings including dismantling old unsv fitting completed all as specified and directed. Make CG Cat No : LCL-14-CDL or Equivalent in Bajaj/Philips/Ledvance/Wipro.

Supply and fix 25 watts, 230 V LED fitting for Building security with pressure die cast aluminum housing, with Control driver with efficiency 90 %, with heat resistant glass and IP 65 protection with better optics for uniform distribution,including necessary fixing arrengment of clamps,nut,bolts, etc..including dismantling old unsv fittings all as specified and directed by Engr-in-Charge. Make : Crompton Greaves model No LSTS-25-CDL or equivalent make of Bajaj/Philips/Ledvance/Wipro.

M&L for sub-main wiring with two runs of 4 sqmm unsheathed PVC insulated, single core cable with copper stranded conductor drawn through and including suitable dia non metallic rigid PVC white conduit/casing caping and conduit accesories concealed/fixed to wall/roof/floor and including suitable PVC conduit with 4 sqmm copper earth wire after taking out the existing sub-main wiring, making good to the distrubed surfaces also matching the existing surfaces all as specified and directed by Engr-in-charge. Note: 2 runs of cable and one run earth wire and conduit will be measured as one length.

Supply and fix sheet metal enclosures for MCB distribution board 230 Volts Single pole and neutral 12 way Double door with 200A rated bus bar complete including flushing the DBs inside the wall and making good to the disturbed surfaces and also matching with the existing surface all as specified and directed.

Taking down and Supply and Fix MCB SPN 6 to 32A, B Curve, 10 KA rupturing capacity all as specified and directed.

Taking down and Supply and Fix MCB SP 6 to 32A, B Curve 10 KA rupturing capacity all as specified and directed.

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth all as directed.

Vinayaka Enterprises

Thirumala Construction

G K CONSTRUCTIONS

OM INFRA

chowdeshwariconstructionco

SRI LAKSHMI CONSTRUCTIONS