ADDN ALTN TO BLDG NO. P-183 AT AFSR IMPROVEMENT TO GUARD REST ROOM AT CAMP AREA PROVN OF WALL AT MAIN ENTRANCE GATE AND PROVN OF METAL CHANNEL SHEET BETWEEN IGLOO HUT NO. 2 3 AT AF STN PALAM UNDER GE (AF) PALAM DELHI CANTT - 10

Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

M&L for 10 mm thick rendering using polymer modified ready-mix cement based mortar (conforming to IS- 1661- 1972, IS-2250-1965, IS:2402-1963) applied in ratio (1:3) as per manufacturer's instruction on brick work or concrete surfaces as on ceilings including finishing surface even and fair without using extra cement complete all as specified and as directed. Make:- Ultratech / Dr. Fixit / Fosroc

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6), surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering using polymer modified ready-mix cement based mortar conforming to (IS- 1661- 1972, IS-2250-1965, IS:2402-1963) applied in ratio (1:4) as per manufacturer's instruction on brick work or concrete surfaces of walls /damaged irregular surface of chajjas, roof projections, ceiling, fascia etc including finishing surface even and fair without using extra cement complete all as specified and as directed. Make:- Ultratech / Dr. Fixit / Fosroc. Note:- The cost of necessary scaffolding up to (G+2 storey) shall be deemed to be included in unit cost.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete etc, complete all as specified and as directed.

M&L for TMT or deformed bar 10mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

S&F mild steel TMT bars 8 to 10 mm dia as in stirrups, spacers and binders complete all as specified and as directed.

M&L for joint free coloured glazed ceramic tiles in vertical surfaces of size (300 x 200)mm x 7mm thick/ (450 x 300)mm x 7mm thick, set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 10mm thick ready-mix cement based mortar adhesive for fixing tiles complete all as specified and as directed.

M&L for vitrified printed digital tiles dark shade, joint free, first quality in different colours pattern as in floors of 8 to 10mm thick (square / rectangular) polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm as in floor etc including 10mm thick ready-mix cement based mortar adhesive for fixing tiles, set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles complete all as specified and as directed.

M&L fgor grinding and bees wax polishing as in floors, skirting, dado etc, with admixture of pigment to match the shade including repair work of existing Kota stone as same specification complete all as specified and as directed by Engr-in-Charge. Note: (i) Rates also including in this item for necessary replacement of terrazzo topping tiles and Kota stone slab etc which are required for repair of existing floor and no extra payment for utizied matarial in repair work in floor. (ii) Mode of measurement:- Actual area grinding with bees wax polishing with repair (floor and adjoining walls) shall be measured and paid.

S&F 18-20 mm thick factory made single extruded WPC (Wood Polymer Composite) louver. A hollow co-extrusion panel of size 219 mm x 2440 mm/2900 mm comprising of virgin polymer high density polyethylene, calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 2200 kg/cum of hybrid grade and screw withdrawal strength of 1800 N (Face), minimum compressive strength of 58 N/mm2, modulus of elasticity 850 N/mm2 with property of being termite/borer proof, water/moisture proof and GRIHA certified. The Panels shall be mounted on grid support system of 50 / 100mm M.S. (Hot Dip Galvanized-Minimum 100 microns) tubular section (or) Extruded Aluminium tube of 50x50x2mm as per instruction by Engineer in charge. The manufacturer should be ISO 9001:2015 Quality Management System Certification and ISO 14001:2015 Environmental Management Systems with in-house testing facility and should have their own manufacturing plant in India. Make : REYNOARCH/REYNOBOND. Note: (i)The quoted rate is included the rate of MS tubular grid frame work and waste on panel . (ii) Shade/colour /pattern /fixing of the panel shall be approved by the GE.

(I) Carefully dismantling of existing wall panelling (PVC / laminated / MDF / gypsum/wooden etc as existing) including removal of fixtures, screws, nails, etc., without damage and stacking the usable material within site. (II) Shifting and safe storage of dismant

S&F solid PVC sheet wall paneling of thickness 5 mm consisting of panels having size 1220mm x 2440mm stuck on inner frame work of 50mm wide strips of 5 mm thick PVC sheet. The strips should have in their center, a grove of 6 mm width and 1 mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval of 10" between two PVC strips. The PVC strips shall be fixed to the wall using 65 mm long MS screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200 mm. A groove of 2mm may be left at the joint of two panel for aesthetic looks. The exact size of the panel and grid may vary depending on the size of the wall. Heat band beading at top shall be provided as per manufacturer's instructions complete. Note:- (i) The quoted rate is included the rate of MS tubular grid frame work. (ii) Shade / colour /pattern /fixing of the panel shall be approved by the GE.

S&F 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

Dismantling ceiling, wall board, any size or description, fixed in any position or in any thickness, including cover fillets with nails complete all as specified and as directed.

Complete repair work only in existing ceiling board /frame, any size or description, refixing in frame and ceiling tiles in any position or in any thickness, including cover fillets with nails complete all as specified and as directed by Engr-in-Charge. Note:- The cost of tiles, T-Grid, suspended galvanized mild steel items, level adjuster of any size etc as required at site shall be deemed to be included in unit rate.

M&L for precast cement concrete PCC (1:2:4) type B-1 (using 20mm graded stone aggregates) as in landing cover slab, drain cover, shelves troughs and the like including weathering slightly rounded or chamfered angles and throating complete all as specified and as directed

M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of white wash complete all as specified and as directed

M&L for preparing old surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion complete all as specified and as directed

M&L for preparing plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down, minimum 2mm thick cement base wall care putty and one coat of alkalic resistant primer and applying two coats of plastic emulsion paint complete all as specified and as directed

M&L for complete removal of existing treatment from external surfaces of walls by mechanicaly and washing, rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of (1:3) to obtain smooth regular/even finish using sand paper and applying cement base wall care putty minimum 2 mm thick and one coat of alkalic resistant primer and applying two coats of plastic emulsion paint complete all as specified and as directed.

M&L for complete removal of existing treatment from external surfaces of walls & ceilings by mechanicaly and washing, rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of (1:3) to obtain smooth regular/even finish using sand paper and providing cement base wall putty (minimum 2mm thick) over a coat of alkalic resistant primer and two coats of oil bound distemper complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing plastered or unplastered old surfaces on walls including brooming down or steel wire brushing, scraping down, 3mm average thickness cement base wall care putty and applying two coats of texture paint over one coat of alkalic resistant primer complete all as specified and as directed.

M&L for preparation of new plastered surface of walls, chajjas, soffits & beam including necessary scaffolding and applying two coats of acrylic smooth exterior paint of required shade 1.43 ltr/10sqm over a coat of exterior primer 2.20kg/sqm over a coat of 2mm average thickness cement base wall care putty complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparing plastered or unplastered new /old surf

S&F plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

S&F toughened glass of 12 mm thick as in partition including all necessary fittings such as framer, clamps /bracket/ channels beadings etc of suitable size and make fixed at site complete all as specified and as directed.

M&L for solar control film 50 micron reflective type sticked to glass panes as per manufacturers instructions complete all as specified and as directed.

S&F 25 mm dia, 1mm thick stainless steel Drapery rod, fancy type brackets & end knob as required complete all as specified and as directed. Note:- Minimum 2 Nos brackets and 02 Nos End knob in each door/ window to be provided without any extra cost.

M&L for 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6Kg/Sqcm, fixed to wall, ceiling or in floor etc complete all as specified and as directed. (concealed type).

M & L for special treatment for sunken portion of WCs/Bath & toilet etc executed in following stages:- Stage 1: Providing 15mm thick plaster in CM (1:3) mixed with water proofing chemical of Dr.Fixit or Shalicrete 'R' of STP Ltd in the proportion/quantity all as per manufacturer's instructions. State 2 : Primer-Mix Tarfelt LM of STP Ltd (diluted with water in ratio 1:1) @ 250 gms/sqm and apply the primer on the plastered surfaces. Stage 3 : Appl

ication of 1st coat of Tarfelt LM of STP Ltd (without dilution with water) @ 1Kg/Sqm by brush all as per manufactuer's instructions. Stage 4: Laying fiber glass cloth (weight not less than 50gram/ Sqm) over the 1st coat while the coated surface is still sticky. Stage 5: After 6 to 7 hours interval, apply second coat i.e. final coat of Tarfet LM of STP Ltd (without Dilution with water) @ 1kg/ Sqm by brush as per manufacturer's instructions. Stage 6: Providing 10mm thick protective plaster in CM (1:3) mixed with STP No. 1 @ 250ml/50 Kg cement all as per manufacturer's instructions. Stage 7: Carryout ponding test for 48 hours to ensure water tightness of repaired sunken portion. NOTES :(i) Mode of measurement:- Actual area treated (floor and adjoining walls) will be measured and paid.

M&L for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs, benching etc including weathering, slightly, rounded or chamfered angle and throughting complete all as specified and as directed.

M&L for plain cement concrete tiles (30cm x 30cm) x 20mm thick machine pressed, set & pointed in neat cement slurry in floor with grey cement and no pigment and cut and polished on roof over and including 10 mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:- (a) Plastering 10mm thick in cement mortar (1:4) on concrete surfaces using WPC @3% by weight of cement, finished even and smooth (b) Surface shall be thoroughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface. (c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. (d) Membrane bonded completely to the substrate & the overlaps are then scaled/fused by flame.

S&F vitreous china wash hand basin coloured of oval tiffany shape minimum of size 550mm x 400mm, bottle trap chromium plated heavy duty 32 mm dia, PVC connection of 15mm dia & 450mm long with PTMT nuts, 15mm bore basin mixer long swan neck chromium plated high pressure with high pressure and 32mm dia brass waste fitting complete all as specified and as directed.

S&F in repairs vitreous china squatting pan, 'Orissa' pattern, size (580 x 440)mm white with integral foot rests, including connection to drain or outgoing pipe and to flushing pipe, anti syphonage pipe joint and to socket or stopper, including flush pipe with all fittings etc complete all as specified and as directed.

S&F vitreous china coloured wash down water closet pan cristy one piece EWC, including ‘P’ or ‘S’ trap and connection to drain & to flushing pipe, coloured seat cover, coloured 10 litres capacity low level flushing cistern super water saver dual including cast iron brackets and brass CP flush pipe long band, and mild steel chromium plated or aluminized hinging devices and 15mm dia Jet spray straight with CP tube 1 mtr long etc complete set and provision of concrete bedding complete all as speicified and and as directed by Engr-in-charge.

S&F in repairs low level flushing cistern 10 ltrs capacity, and connections to pipes and fixing of chain and pull, or lever, if any PVC valveless, syphonic action type, low level, white with inlet, including cast iron brackets complete all as specified and as directed.

S&F Plantex Ceramic Premium Wall Mount Large Urinal Pot (White, Loki) white or coloured with grating and union for discharge through bottle trap chromium plated heavy duty 32 mm dia, PVC connection pipe of 15mm dia & 450mm long with steel nuts, 15 mm dia angular stop cock long lever brass chromium plated with high pressure and 32mm dia brass waste fitting and including chromium plated spreader etc complete all as specified and as directed.

S&F curved shaped urinal partition size 900 mm x 450 mm of frosted glass 12 mm thick wall mounted fixed with steel bracket min 3 Nos complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed by Engineer-in-Charge.

S&F brass CP towel rail 600 mm long, fixed with and including chromium plated screws on walls, complete all as specified and directed. Make:- Prayag Cat No BA-01 or equivalent as per list of makes.

Taking up or down 15mm bore steel tubing and connections in walls, ceilings, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed.

M&L for GI tubing, 15mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections in walls, ceilings, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed.

M&L for GI tubing, 20mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

Taking down CI pipes of 100/110mm dia of any description including all fittings complete all as specified and as directed.

Taking down CI pipes of 75/ 80mm dia of any description including all fittings complete all as specified and as directed.

S&F 75mm bore cast iron waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and as directed.

S&F 75mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls including suitable iron clamps after every one metre of interval with cement joints fixed to wall complete all as specified and as directed.

S&F 100mm bore cast iron waste and vent pipe in any length with or without ears with cement joints laid in trenches or in floors complete all as specified and as directed.

S&F 100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls with cement joints fixed to wall including suitable iron clamps after every one metre of interval complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls with and including suitable iron clamps at one meter of interval complete all as specified and as directed.

S&F CI 100mm bends complete all as specified and as directed.

S&F CI 100mm bends with door complete all as specified and as directed.

S&F CI 100mm single branch piece with door complete all as specified and as directed.

S&F CI 75mm bends with door complete all as specified and as directed.

S&F cast iron cowls 100 mm size complete all as specified and as directed.

M&L in repairs for cast iron Nahani trap/floor trap with CP grating including jointing with cement joint to waste pipe of 75mm dia fixed i

n cement concrete type B-1(1:2:4) complete all as specified

S&F in repairs for cast Iron 'P' or 'S' trap 100mm bore complete all as specified and as directed.

M&L for providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.

M&L Anti termite Treatment of wood work such as chowkhat or shutters by points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same with putting complete all as specified and as directed by Engineer-in-Charge.

Rooting out trees, flora & fauna and foliage as grown on RCC roof surfaces and brick/stone walls by cutting hole into slabs/walls for digging out roots and using chemical to burn deep rooted tree roots etc and making good disturbed portion of wall/roof with cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) complete all as specified and as directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling water tanks and removing from site with and including 20 mm ball brass valves, high pressure, with polythene float and flynut complete all as specified and as directed.

S&F ball brass valves, 20 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Disconnecting existing water tank exc 500 litres but n. exc 1000 litres capacity in any position, setting aside for repairs, cleaning and removing all scales, dirts etc from tank and mouth of circulating pipes etc and re-fixing in position complete all as specified and as directed by Engineer-in-charge.

S&F Kitchen plate rack made of stainless steel 1mm thick with plugs, washers as overall size (90cm x 90 cm) including fixing to wall and all accessories complete all as specified and as directed by Engineer-in-Charge.

S&F 5mm thick glass mirror of size exceeding 0.60 sqm but n. exc 2.0 sqm with making edges/ border moulding complete all as specified and as directed.

S&F in repairs 15 mm bore bib tap long body chromium plated, fancy type, cast copper alloy with capstan head screwed down, screwed for iron pipe or for brass ferrule fancy type complete all as specified and as directed.

S&F in repair 15 mm dia stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle fancy type screwed both side for iron pipe oe for union and fixed complete all as specified and as directed.

S&F in repair chromium plated bib taps fancy type of 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repair pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure with or without lettered Hot or Cold with screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F 15mm dia angular stop cock cast copper alloy screwed down, high pressure, screwed both side for iron pipe or for union and fixed complete all as specified and as directed. Make:- Jaquar code FLR-CHR-5053N or equivalent of make MARC or KOHLER as approved by the GE.

S&F Hand Shower (Health faucet) with 1.00 metre long Easy flex tube in chrome finish & wall Hook, complete all as specified and as directed. Cat No ALD-CHR-565 of JAQUAR or equivalent of make MARC or KOHLER as approved by the GE.

Demolition and breaking up 150mm dia drain pipes (slat glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed.

M&L 100 mm thick concrete bed to drain pipes in cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and as directed.

M&L for unplasticisted PVC drainage pipe 160mm dia type 'B' with wall thickness 4mm (min) of pressure rating 6KN/Sqm laid in trenches and jointed with cement solvent including testing complete all as specified and as directed. Make:- Jain Pipes / Ajay flowgaurd / Astra pipes

M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in surface channel, drain and manholes complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in benching, coping including necessary use and waste of form work complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6) type C1, (using 20mm graded stone aggregate) as in plinth protections, surface finished even and smooth without using extra cement complete including use and waste of necessary form work complete all as specified and as directed.

S&F stainless steel letters of metal 50mm width and height minimum 20cm to 30cm fitted on walls complete all as specified and as directed.

S&F 2mm thick stainless steel necessery unit insignia (logo/symbol ) area exc 0.25 sqm and not exc 0.50sqm complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the debries outside of defence land from the site complete all as specified and as directed.

M&L for 75mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base including preparation, cleaning of existing surface to receive sub base complete all as specified and as directed.

M&L for cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick complete all as specified and as directed.

M&L for rendering 15mm thick in two layers, 5mm thick using WPC @3% by weight of cement over 10mm thick on cement concrete block masonry/concrete surfaces in cement mortar (1:4), surface finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for two coats of oil bound distemper over a coat of primer on old surfaces of ceiling complete all as specified and as directed.

S&F solid PVC coloured door frame of size (50 x 47)mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification and drawing complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (sysles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyeurethane painted on front face and 2mm plain colour PVC sheet on back face with particle board core complete all as specified and as directed.

S&F 100mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolt complete all as specified and as directed.

S&F 200mm size aluminium anodised door handles complete all as specified and as directed.

M&L for pressed steel frames of size 105X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including PCC (1:3:6) type C-0 (using 12.5mm graded aggregate) as in filling in frame complete all as specified and as directed.

for 35mm thick flush shutters with lipping all around of solid core construction with block board core and ply wood face panels commercial type on both side complete all as specified and as directed.

M&L for brass sliding door bolt with sand or die cast brass hasp, staple (bolt type) length 300mm fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

S&F 200mm long extruded brass handles, fabricated type polished complete all as specified and as directed.

S&F 200mm long brass barrel tower bolts, with cast or sheet barrel and rolled and cast bolts fixed complete all as specified and as directed.

M&L for 150mm decorative floor door stopper of brass fixed to door complete all as specified and as directed.

M&L for 0.9mm thick decorative laminate type1 of surface finish, colour and pattern as approved by Engr-in-charge, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

S&F in repair vitreous china Orrisa pan squatting pattern of size (580x440)mm with integral foot rests including P or S trap, with and including PVC low level flushing cistern 10 ltr capacity complete all as specified and as directed by Engr-in-Charge.

S&F wash hand basin, vitreous china, coloured flat back of size (550 x 400)mm including cutting for and pinning in ends of brackets or erecting stand with and including brass CP grating, brass waste coupling, PTMT waste pipe, 15mm dia bore CP swan neck pillar taps cast copper alloy chromium plated fancy type complete all as specified and as directed by Engr-in-Charge.

S&F urinal, half stall type, white including CP waste coupling, fixed to 15mm dia pipe complete all as specified and as directed.

S&F chromium plated push type, auto closing concealed urinal flush valve with wall flange complete all as specified and as directed.

S&F stainless steel grating doom 125mm dia complete all as specified and as directed.

S&F 15mm dia bore, two way bib tap, long body, fancy type, brass chromium plated, with crutch handle, screwed down for iron Pipe complete all as specified and as directed.

M&L for 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all as specified and as directed.

M&L for cutting chases, pinning in brick, stone, concrete block walls, making good to facings where required and pointing in cement mortar (1:3) to concealed water tubing and making good complete all as specified and as directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls with and including suitable iron clamps at one meter of interval complete all as specified and as directed.

S&F PVC (SWR) bends of any radius 110mm bore complete all as specified and as directed.

S&F PVC (SWR) bends of any radius 75mm bore complete all as specified and as directed.

S&F 110mm dia PVC (SWR) vent cowl complete complete all as specified and as directed.

S&F brass CP wall mixer 15mm bore including connection pipes for mixing hot or cold water screwed down for GI pipe and fixed complete all as specified and as directed.

S&F in repair 125mm chromium plated shower roses with arm with or without swivel joints, any size including fixing to GI pipe complete all as specified and as directed.

S&F anodised powder coated (thickness of powder coating not less than 50micron) aluminim window and ventilator shutters, fixed type without sash bar, aluminium section weight not less than 0.55kg/mtr including necessary joining cleats, glazing clips, rubber packing, screws etc. complete all as specified and as directed.

Demolition of stone slabs and tiles laid beded and pointed in any mortar of any description or thicknes in floors, aprons etc complete all as specified and as directed.

M&L for Dholpur Elevation tiles as in vertical surfaces, 10 to 15mm thick (square or rectangular) area of each tile exc 0.11 Sqm and n exc. 0.18 Sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick ready-mix cement based mortar adhesive for fixing tiles & stone approved brand etc and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Surface dressing n exc 15cm deep and getting out in soft and loose soil complete all as specified and as directed.

M&L for broken stone or boulder hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface for plinth protection/path etc complete all as specified and as directed.

M&L for mild steel black sheet 1.60mm thick as in water troughs, ducts and similar work cut to size, bend to shape as required, holes punched, including round headed screws, cut nails or revets and fixed to steel framing with plain 40mm lap joints with reveted or welded seams including or turning up as per Engr-in-Charge including taking down of old sheet complete all as specified and as directed.

M&L for mild steel framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary gusset plates, riveting etc. complete conforming to Fe-290.(Gde E-165) complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. any type complete all as specified and as directed.

Taking down ceiling/exhaust fan of any sweep after through cleaning of blades with a brush then by damp cloth dipped in soapy water to remove the remaining sticky stains and drying the same including lubricating by pouring oil, tightening all screws, ceiling plate and light fixture and refixing to its original position including provision of flexible cable, connector and connection from connector to fan complete painting of ceiling fans with synthetic enamel paint by spraying complete, including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and as directed.

Hanging/ refixing only ceiling/exhaust fan to its original position including provision of flexible cable, connector and connection from connector to fan complete all as specified and as directed.

Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed.

M&L for point wiring with single core PVC insulated unsheathed 1.5 Sqmm FRLSH multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20mm dia ISI marked with all conduit fittings and fixing accessories suitable for mounting modular switches including modular metal flush box and modular face plate with frame for mounting switches, sockets, fan regulators, etc and earth wire single core PVC insulated but unsheathed multistranded copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLS cable as continuous earth wire connecting to common earth dolly in concealed wiring system includes cutting of chases and making good disturbed surfaces complete all as specified and as directed for the following :- (a) One light/fan point controlled by one switch one way

(b) One 3 pin 5 Amps socket out let point on the same board controlled by one switch complete all as specified and as directed.

(c) One socket outlet 5 Amp controlled by one s

witch on independent board complete all as specified and as directed.

All as per Srl item No 197.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 sqmm stranded copper conductor cable PVC insulated including earth wire 2.5 sqmm copper conductor cable connected to earth dolly complete all as specified and as directed.

M&L modular switch 1 way 6 Amps 1 module complete all as specified and as directed.

M&L modular switch 1 way 16 Amps 1 module complete all as specified and as directed.

M&L modular socket outlet 6A, 2/3 pin combined 2 module complete all as specified and as directed.

M&L modular socket outlet 6A/16A, 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fixing ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified and as directed.

S&F lamp holder, PVC/polycarbonate type with with back plate suitable for batten fittings complete all as specified.

S&F lamp LED 9 watt fixed in pendent holder/bulk head fittings complete all as specified and directed.

M&L for stepped type electronic fan regulator 230 -250 Volts, 2 module suitable for ceiling fan of size 1200 /1400 mm sweep complete all as specified and as directed.

Supply and fixing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 250mm complete all as specified and as directed.

Supply and fixing enviroment friendly indoor decorative 20 watt LED for wall mounted 20 Watt LED batten, extruded aluminium heat shrink provided for heat dissipation and integrated electronic driver back plate suitable for batten fittings complete all as directed. Make:- Havells Cat LHEWEBP7IN1W020 or equivalant

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply and fixing enviroment friendly indoor decorative mirror LED light fitting 1x10 watt with opal diffuser including all accessories suitable for batten fittings complete all as specified and as directed.

M&L for sheet metal enclosure for DBs 8 way double door type with 200 amps rated busbar SPN including necessary connection complete all as specified and as directed.

Supply and fixing for replacement vertical type load line distribution board, double door, 6 way, AC, 3 Phase, 415 volts, TPN, bus bar 200 Amps rating and earth bus & din rail suitable for MCCB as incomer complete all as specified and as directed.

Supply and fixing MCCB 160 Amps 4 pole 36 kA 415 Volts 50 Hz with thermal adjustable magnetic settings, necessary conection including taking out old existing unserviceable MCCB from panels/VTPN etc complete all as specified and as directed.

Supply and fixing for MCB, SPN, 40-63 Amp, 10kA complete all as specified and as directed.

Supply and fixing for MCB, SP, 5-32 Amp 10 kA complete all as specified and as directed.

Material and labour for submain wiring with two single core 4.00 sq mm PVC insulated FRLSH multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 4.00 sqmm multistranded copper conductor cable as continuous earth wire complete all as sepcified and as directed.

Description all as per srl item No. 218.00 here in above but for 6.00 sqmm main wire and 6.0 sqmm earth wire complete all as specified and as directed. Note for ser No 218 & 219:- Two main wire, one earth wire, PVC conduit and cutting chases shall be deemed to be included in unit rate of one run.

S&F in replacement of LED street light fittings 60 Watt 230 Volt AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, GI pipe light grade 32/40 mm dia bracket to make L type & MS flat clamp of size 30mm x 5mm thick including nuts, bolts and washer suitable for bldg light fitting with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and as directed.

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20-32 Amps 'C' series complete all as specified and as directed.